[PATCH 7/8] configs: j7200_evm_a72: Enable R5F remoteproc driver

[Suman Anna]

The J7200 SoCs has two R5F sub-systems. Enable the TI K3
R5F remoteproc driver and the remoteproc command options
to allow these R5F processors to be booted from A72 U-Boot.

The Kconfigs are added using savedefconfig.

Signed-off-by: Suman Anna <s-anna at ti.com>
---
 configs/j7200_evm_a72_defconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index 6e854648eb45..52440a09a647 100644
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_J721E=y
 CONFIG_TARGET_J7200_A72_EVM=y
 CONFIG_ENV_SIZE=0x20000
@@ -16,7 +17,6 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_OFFSET_REDUND=0x6A0000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
@@ -61,6 +61,7 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MTD=y
+CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_UFS=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
@@ -140,6 +141,7 @@ CONFIG_POWER_DOMAIN=y
 CONFIG_TI_SCI_POWER_DOMAIN=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y
+CONFIG_REMOTEPROC_TI_K3_R5F=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_SCSI=y
-- 
2.28.0