[PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform
Lokesh Vutla
lokeshvutla at ti.com
Wed Aug 5 19:13:34 CEST 2020
This series adds initial support for latest new SoC, J7200, from Texas Instruments.
The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded products.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Changes since v2:
- Rebased on top of latest master
- Addressed comments form Suman and Vignesh
Changes since v1:
- Updated compatible for sdhci
- Enabled CONFIG_OF_BOARD_SETUP for fixuping up msmc dt node.
- Split R5 dts and A72 dts
Dave Gerlach (1):
arm: dts: k3-j7200: Add R5 specific dts support
Jean-Jacques Hiblot (1):
arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled
Kishon Vijay Abraham I (1):
soc: soc_ti_k3: Add device identification for J7200 SoC
Lokesh Vutla (15):
board: ti: board_detect: Add stub functions for EEPROM detection apis
board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is
defined
arm: mach-k3: Move mmr_unlock to a common location
arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
arm: mach-k3: j721e: Add detection for j721e
arm: mach-k3: j721e: Fix unlocking control module registers
arm: mach-k3: j7200: Add support for SOC detection
arm: mach-k3: j7200: Add support for storing extended boot info from
ROM
arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
board: ti: j7200: Introduce support for j7200 build targets
board: ti: j7200: Add board detection support for j7200
ram: k3-j721e: Relax version checks for memory controller
arm: dts: k3-j7200: Add dts support
configs: j7200_evm_r5: Add initial support
configs: j7200_evm_a72: Add Initial support
Suman Anna (1):
board: ti: j721e: Update fdt fixup logic for interconnect nodes
arch/arm/dts/Makefile | 4 +-
.../k3-j7200-common-proc-board-u-boot.dtsi | 104 +
arch/arm/dts/k3-j7200-common-proc-board.dts | 123 +
arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi | 2195 +++++++++++++++++
arch/arm/dts/k3-j7200-main.dtsi | 313 +++
arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 117 +
.../arm/dts/k3-j7200-r5-common-proc-board.dts | 199 ++
arch/arm/dts/k3-j7200-som-p0.dtsi | 29 +
arch/arm/dts/k3-j7200.dtsi | 175 ++
arch/arm/mach-k3/am6_init.c | 12 +-
arch/arm/mach-k3/common.c | 38 +
arch/arm/mach-k3/common.h | 6 +
arch/arm/mach-k3/config.mk | 8 +-
arch/arm/mach-k3/include/mach/hardware.h | 8 +
.../arm/mach-k3/include/mach/j721e_hardware.h | 3 +
arch/arm/mach-k3/include/mach/sys_proto.h | 3 +
arch/arm/mach-k3/include/mach/sysfw-loader.h | 4 +-
arch/arm/mach-k3/j721e_init.c | 30 +-
arch/arm/mach-k3/sysfw-loader.c | 56 +-
board/ti/common/board_detect.h | 13 +
board/ti/j721e/Kconfig | 53 +
board/ti/j721e/evm.c | 25 +-
configs/j7200_evm_a72_defconfig | 175 ++
configs/j7200_evm_r5_defconfig | 130 +
drivers/ram/k3-j721e/lpddr4.c | 16 +-
drivers/soc/soc_ti_k3.c | 4 +
include/configs/j721e_evm.h | 4 +-
27 files changed, 3776 insertions(+), 71 deletions(-)
create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
create mode 100644 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts
create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
create mode 100644 arch/arm/dts/k3-j7200.dtsi
create mode 100644 configs/j7200_evm_a72_defconfig
create mode 100644 configs/j7200_evm_r5_defconfig
--
2.23.0
More information about the U-Boot
mailing list