[PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin

Stefan Roese sr at denx.de
Mon Aug 31 15:04:33 CEST 2020


On 19.08.20 16:19, Pali Rohár wrote:
> From: Wilson Ding <dingwei at marvell.com>
> 
> Enabled SDIO slot 0 (south bridge) for SD card on
> Espressobin board.
> 
> Change-Id: I51a2debf9fba276b9c4a2bc6da91328d47f443e3
> Signed-off-by: Wilson Ding <dingwei at marvell.com>
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> Reviewed-on: http://vgitil04.il.marvell.com:8080/60945
> Tested-by: iSoC Platform CI <ykjenk at marvell.com>
> Reviewed-by: Igal Liberman <igall at marvell.com>
> [pali: Define cd-gpios and enable CONFIG_DM_REGULATOR_GPIO]
> Signed-off-by: Pali Rohár <pali at kernel.org>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-3720-espressobin.dts    | 20 ++++++++++++++++++++
>   configs/mvebu_espressobin-88f3720_defconfig |  1 +
>   2 files changed, 21 insertions(+)
> 
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
> index f10a953ec5..92eddca6c0 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -67,6 +67,17 @@
>   		device_type = "memory";
>   		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
>   	};
> +
> +	vcc_sd_reg0: regulator at 0 {
> +		compatible = "regulator-gpio";
> +		regulator-name = "vcc_sd0";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-type = "voltage";
> +		states = <1800000 0x1
> +			  3300000 0x0>;
> +		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
> +	};
>   };
>   
>   &comphy {
> @@ -110,6 +121,15 @@
>   	status = "okay";
>   };
>   
> +&sdhci0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdio_pins>;
> +	bus-width = <4>;
> +	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
> +	vqmmc-supply = <&vcc_sd_reg0>;
> +	status = "okay";
> +};
> +
>   &spi0 {
>   	status = "okay";
>   	pinctrl-names = "default";
> diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
> index 495faf43a3..933592af88 100644
> --- a/configs/mvebu_espressobin-88f3720_defconfig
> +++ b/configs/mvebu_espressobin-88f3720_defconfig
> @@ -81,3 +81,4 @@ CONFIG_USB_ETHER_SMSC95XX=y
>   CONFIG_SHA1=y
>   CONFIG_SHA256=y
>   CONFIG_MVNETA=y
> +CONFIG_DM_REGULATOR_GPIO=y
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list