[EXT] [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin
Kostya Porotchkin
kostap at marvell.com
Wed Aug 19 19:57:45 CEST 2020
> -----Original Message-----
> From: Pali Rohár <pali at kernel.org>
> Sent: Wednesday, August 19, 2020 17:20
> To: Peng Fan <peng.fan at nxp.com>; Kostya Porotchkin
> <kostap at marvell.com>; Stefan Roese <sr at denx.de>
> Cc: u-boot at lists.denx.de
> Subject: [EXT] [PATCH 2/2] arm: dts: a37x0: enable sd card support on
> espressobin
>
> External Email
>
> ----------------------------------------------------------------------
> From: Wilson Ding <dingwei at marvell.com>
>
> Enabled SDIO slot 0 (south bridge) for SD card on Espressobin board.
>
> Change-Id: I51a2debf9fba276b9c4a2bc6da91328d47f443e3
> Signed-off-by: Wilson Ding <dingwei at marvell.com>
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> Reviewed-on: http://vgitil04.il.marvell.com:8080/60945
> Tested-by: iSoC Platform CI <ykjenk at marvell.com>
> Reviewed-by: Igal Liberman <igall at marvell.com>
> [pali: Define cd-gpios and enable CONFIG_DM_REGULATOR_GPIO]
> Signed-off-by: Pali Rohár <pali at kernel.org>
Reviewed-by: Konstantin Porotchkin <kostap at marvell.com>
> ---
> arch/arm/dts/armada-3720-espressobin.dts | 20 ++++++++++++++++++++
> configs/mvebu_espressobin-88f3720_defconfig | 1 +
> 2 files changed, 21 insertions(+)
>
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts
> b/arch/arm/dts/armada-3720-espressobin.dts
> index f10a953ec5..92eddca6c0 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -67,6 +67,17 @@
> device_type = "memory";
> reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
> };
> +
> + vcc_sd_reg0: regulator at 0 {
> + compatible = "regulator-gpio";
> + regulator-name = "vcc_sd0";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-type = "voltage";
> + states = <1800000 0x1
> + 3300000 0x0>;
> + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
> + };
> };
>
> &comphy {
> @@ -110,6 +121,15 @@
> status = "okay";
> };
>
> +&sdhci0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdio_pins>;
> + bus-width = <4>;
> + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
> + vqmmc-supply = <&vcc_sd_reg0>;
> + status = "okay";
> +};
> +
> &spi0 {
> status = "okay";
> pinctrl-names = "default";
> diff --git a/configs/mvebu_espressobin-88f3720_defconfig
> b/configs/mvebu_espressobin-88f3720_defconfig
> index 495faf43a3..933592af88 100644
> --- a/configs/mvebu_espressobin-88f3720_defconfig
> +++ b/configs/mvebu_espressobin-88f3720_defconfig
> @@ -81,3 +81,4 @@ CONFIG_USB_ETHER_SMSC95XX=y CONFIG_SHA1=y
> CONFIG_SHA256=y CONFIG_MVNETA=y
> +CONFIG_DM_REGULATOR_GPIO=y
> --
> 2.20.1
More information about the U-Boot
mailing list