[PATCH v2 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Wed Aug 19 16:30:44 CEST 2020
Am Montag, den 17.08.2020, 14:12 +0200 schrieb Stefan Roese:
> From: Aaron Williams <awilliams at marvell.com>
>
> This Octeon 3 DDR driver is ported from the 2013 Cavium / Marvell U-Boot
> repository. It currently supports DDR4 on Octeon 3. It can be later
> extended to support also DDR3 and Octeon 2 platforms.
>
> Part 1 adds the base U-Boot RAM driver, which will be instantiated by
> the DT based probing.
>
> Signed-off-by: Aaron Williams <awilliams at marvell.com>
> Signed-off-by: Stefan Roese <sr at denx.de>
>
> ---
>
> Changes in v2:
> - Don't re-init after relocation
> - Some unsupported Octeon families removed (only Octeon 2 & 3 supported
> in general)
>
> drivers/ram/octeon/octeon_ddr.c | 2730 +++++++++++++++++++++++++++++++
> 1 file changed, 2730 insertions(+)
> create mode 100644 drivers/ram/octeon/octeon_ddr.c
some general notes:
- there are still some C++ style comments
- there are a lot of non-static functions, are them really used in
other source files and why? Of course you can split the code into
multiple files but this file is the driver entrypoint and shouldn't
export anything
>
> diff --git a/drivers/ram/octeon/octeon_ddr.c b/drivers/ram/octeon/octeon_ddr.c
> new file mode 100644
> index 0000000000..0b347b61fd
> --- /dev/null
> +++ b/drivers/ram/octeon/octeon_ddr.c
> @@ -0,0 +1,2730 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Marvell International Ltd.
> + *
> + * https://spdx.org/licenses
this line is superfluous
> + */
> +
> +#include <common.h>
try to avoid common.h in new code
> +#include <command.h>
> +#include <dm.h>
> +#include <hang.h>
> +#include <i2c.h>
> +#include <ram.h>
> +#include <time.h>
> +
> +#include <asm/sections.h>
> +#include <linux/io.h>
> +
> +#include <mach/octeon_ddr.h>
do Octeon ARM and MIPS share the same DDR3/4 memory controller? If yes,
would this driver support both archs and would ARM provide an own
version of octeon_ddr.h?
> +
> +#define CONFIG_REF_HERTZ 50000000
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* Sign of an integer */
> +static s64 _sign(s64 v)
> +{
> + return (v < 0);
> +}
> +
> +#ifndef DDR_NO_DEBUG
> +char *lookup_env(struct ddr_priv *priv, const char *format, ...)
> +{
> + char *s;
> + unsigned long value;
> + va_list args;
> + char buffer[64];
> +
> + va_start(args, format);
> + vsnprintf(buffer, sizeof(buffer), format, args);
> + va_end(args);
> +
> + s = ddr_getenv_debug(priv, buffer);
> + if (s) {
> + value = simple_strtoul(s, NULL, 0);
> + printf("Parameter found in environment %s=\"%s\" 0x%lx (%ld)\n",
> + buffer, s, value, value);
> + }
> +
> + return s;
> +}
> +
> +char *lookup_env_ull(struct ddr_priv *priv, const char *format, ...)
> +{
> + char *s;
> + u64 value;
> + va_list args;
> + char buffer[64];
> +
> + va_start(args, format);
> + vsnprintf(buffer, sizeof(buffer), format, args);
> + va_end(args);
> +
> + s = ddr_getenv_debug(priv, buffer);
> + if (s) {
> + value = simple_strtoull(s, NULL, 0);
> + printf("Parameter found in environment. %s = 0x%016llx\n",
> + buffer, value);
> + }
> +
> + return s;
> +}
> +#else
> +char *lookup_env(struct ddr_priv *priv, const char *format, ...)
> +{
> + return NULL;
> +}
> +
> +char *lookup_env_ull(struct ddr_priv *priv, const char *format, ...)
> +{
> + return NULL;
> +}
> +#endif
> +
> +/* Number of L2C Tag-and-data sections (TADs) that are connected to LMC. */
> +#define CVMX_L2C_TADS ((OCTEON_IS_MODEL(OCTEON_CN68XX) || \
> + OCTEON_IS_MODEL(OCTEON_CN73XX) || \
> + OCTEON_IS_MODEL(OCTEON_CNF75XX)) ? 4 : \
> + (OCTEON_IS_MODEL(OCTEON_CN78XX)) ? 8 : 1)
> +
> +/* Number of L2C IOBs connected to LMC. */
> +#define CVMX_L2C_IOBS ((OCTEON_IS_MODEL(OCTEON_CN68XX) || \
> + OCTEON_IS_MODEL(OCTEON_CN78XX) || \
> + OCTEON_IS_MODEL(OCTEON_CN73XX) || \
> + OCTEON_IS_MODEL(OCTEON_CNF75XX)) ? 2 : 1)
> +
> +#define CVMX_L2C_MAX_MEMSZ_ALLOWED (OCTEON_IS_OCTEON2() ? \
> + (32 * CVMX_L2C_TADS) : \
> + (OCTEON_IS_MODEL(OCTEON_CN70XX) ? \
> + 512 : (OCTEON_IS_OCTEON3() ? 1024 : 0)))
> +
> +/**
> + * Initialize the BIG address in L2C+DRAM to generate proper error
> + * on reading/writing to an non-existent memory location.
> + *
> + * @param node OCX CPU node number
> + * @param mem_size Amount of DRAM configured in MB.
> + * @param mode Allow/Disallow reporting errors L2C_INT_SUM[BIGRD,BIGWR].
> + */
> +static void cvmx_l2c_set_big_size(struct ddr_priv *priv, u64 mem_size, int mode)
> +{
> + if ((OCTEON_IS_OCTEON2() || OCTEON_IS_OCTEON3()) &&
> + !OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X)) {
> + union cvmx_l2c_big_ctl big_ctl;
> + int bits = 0, zero_bits = 0;
> + u64 mem;
> +
> + if (mem_size > (CVMX_L2C_MAX_MEMSZ_ALLOWED * 1024ull)) {
> + printf("WARNING: Invalid memory size(%lld) requested, should be <= %lld\n",
> + mem_size,
> + (u64)CVMX_L2C_MAX_MEMSZ_ALLOWED * 1024);
> + mem_size = CVMX_L2C_MAX_MEMSZ_ALLOWED * 1024;
> + }
> +
> + mem = mem_size;
> + while (mem) {
> + if ((mem & 1) == 0)
> + zero_bits++;
> + bits++;
> + mem >>= 1;
> + }
> +
> + if ((bits - zero_bits) != 1 || (bits - 9) <= 0) {
> + printf("ERROR: Invalid DRAM size (%lld) requested, refer to L2C_BIG_CTL[maxdram] for valid options.\n",
> + mem_size);
> + return;
> + }
> +
> + /*
> + * The BIG/HOLE is logic is not supported in pass1 as per
> + * Errata L2C-17736
> + */
> + if (mode == 0 && OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
> + mode = 1;
> +
> + big_ctl.u64 = 0;
> + big_ctl.s.maxdram = bits - 9;
> + big_ctl.cn61xx.disable = mode;
> + l2c_wr(priv, CVMX_L2C_BIG_CTL, big_ctl.u64);
> + }
> +}
> +
> +static u32 octeon3_refclock(u32 alt_refclk, u32 ddr_hertz,
> + struct dimm_config *dimm_config)
> +{
> + u32 ddr_ref_hertz = CONFIG_REF_HERTZ;
> + int ddr_type;
> + int spd_dimm_type;
> +
> + debug("%s(%u, %u, %p)\n", __func__, alt_refclk, ddr_hertz, dimm_config);
> +
> + /* Octeon 3 case... */
> +
> + /* we know whether alternate refclk is always wanted
> + * we also know already if we want 2133 MT/s
> + * if alt refclk not always wanted, then probe DDR and
> + * DIMM type if DDR4 and RDIMMs, then set desired refclk
> + * to 100MHz, otherwise to default (50MHz)
> + * depend on ddr_initialize() to do the refclk selection
> + * and validation/
> + */
> + if (alt_refclk) {
> + /*
> + * If alternate refclk was specified, let it override
> + * everything
> + */
> + ddr_ref_hertz = alt_refclk * 1000000;
> + printf("%s: DRAM init: %d MHz refclk is REQUESTED ALWAYS\n",
> + __func__, alt_refclk);
> + } else if (ddr_hertz > 1000000000) {
> + ddr_type = get_ddr_type(dimm_config, 0);
> + spd_dimm_type = get_dimm_module_type(dimm_config, 0, ddr_type);
> +
> + debug("ddr type: 0x%x, dimm type: 0x%x\n", ddr_type,
> + spd_dimm_type);
> + /* Is DDR4 and RDIMM just to be sure. */
> + if (ddr_type == DDR4_DRAM &&
> + (spd_dimm_type == 1 || spd_dimm_type == 5 ||
> + spd_dimm_type == 8)) {
> + /* Yes, we require 100MHz refclk, so set it. */
> + ddr_ref_hertz = 100000000;
> + puts("DRAM init: 100 MHz refclk is REQUIRED\n");
> + }
> + }
> +
> + debug("%s: speed: %u\n", __func__, ddr_ref_hertz);
> + return ddr_ref_hertz;
> +}
> +
> +int encode_row_lsb_ddr3(int row_lsb)
> +{
> + int row_lsb_start = 14;
> +
> + /* Decoding for row_lsb */
> + /* 000: row_lsb = mem_adr[14] */
> + /* 001: row_lsb = mem_adr[15] */
> + /* 010: row_lsb = mem_adr[16] */
> + /* 011: row_lsb = mem_adr[17] */
> + /* 100: row_lsb = mem_adr[18] */
> + /* 101: row_lsb = mem_adr[19] */
> + /* 110: row_lsb = mem_adr[20] */
> + /* 111: RESERVED */
> +
> + if (octeon_is_cpuid(OCTEON_CN6XXX) ||
> + octeon_is_cpuid(OCTEON_CNF7XXX) || octeon_is_cpuid(OCTEON_CN7XXX))
> + row_lsb_start = 14;
> + else
> + printf("ERROR: Unsupported Octeon model: 0x%x\n",
> + read_c0_prid());
> +
> + return row_lsb - row_lsb_start;
> +}
> +
> +int encode_pbank_lsb_ddr3(int pbank_lsb)
> +{
> + /* Decoding for pbank_lsb */
> + /* 0000:DIMM = mem_adr[28] / rank = mem_adr[27] (if RANK_ENA) */
> + /* 0001:DIMM = mem_adr[29] / rank = mem_adr[28] " */
> + /* 0010:DIMM = mem_adr[30] / rank = mem_adr[29] " */
> + /* 0011:DIMM = mem_adr[31] / rank = mem_adr[30] " */
> + /* 0100:DIMM = mem_adr[32] / rank = mem_adr[31] " */
> + /* 0101:DIMM = mem_adr[33] / rank = mem_adr[32] " */
> + /* 0110:DIMM = mem_adr[34] / rank = mem_adr[33] " */
> + /* 0111:DIMM = 0 / rank = mem_adr[34] " */
> + /* 1000-1111: RESERVED */
> +
> + int pbank_lsb_start = 0;
> +
> + if (octeon_is_cpuid(OCTEON_CN6XXX) ||
> + octeon_is_cpuid(OCTEON_CNF7XXX) || octeon_is_cpuid(OCTEON_CN7XXX))
> + pbank_lsb_start = 28;
> + else
> + printf("ERROR: Unsupported Octeon model: 0x%x\n",
> + read_c0_prid());
> +
> + return pbank_lsb - pbank_lsb_start;
> +}
> +
> +static void set_ddr_clock_initialized(struct ddr_priv *priv, int if_num,
> + bool inited_flag)
> +{
> + priv->ddr_clock_initialized[if_num] = inited_flag;
> +}
> +
> +static int ddr_clock_initialized(struct ddr_priv *priv, int if_num)
> +{
> + return priv->ddr_clock_initialized[if_num];
> +}
> +
> +static void set_ddr_memory_preserved(struct ddr_priv *priv)
> +{
> + priv->ddr_memory_preserved = true;
> +}
> +
> +bool ddr_memory_preserved(struct ddr_priv *priv)
> +{
> + return priv->ddr_memory_preserved;
> +}
> +
> +static void cn78xx_lmc_dreset_init(struct ddr_priv *priv, int if_num)
> +{
> + union cvmx_lmcx_dll_ctl2 dll_ctl2;
> +
> + /*
> + * The remainder of this section describes the sequence for LMCn.
> + *
> + * 1. If not done already, write LMC(0..3)_DLL_CTL2 to its reset value
> + * (except without changing the LMC(0..3)_DLL_CTL2[INTF_EN] value from
> + * that set in the prior Step 3), including
> + * LMC(0..3)_DLL_CTL2[DRESET] = 1.
> + *
> + * 2. Without changing any other LMC(0..3)_DLL_CTL2 fields, write
> + * LMC(0..3)_DLL_CTL2[DLL_BRINGUP] = 1.
> + */
> +
> + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num));
> + dll_ctl2.cn78xx.dll_bringup = 1;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64);
> +
> + /*
> + * 3. Read LMC(0..3)_DLL_CTL2 and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num));
> +
> + /*
> + * 4. Wait for a minimum of 10 LMC CK cycles.
> + */
> +
> + udelay(1);
> +
> + /*
> + * 5. Without changing any other fields in LMC(0..3)_DLL_CTL2, write
> + * LMC(0..3)_DLL_CTL2[QUAD_DLL_ENA] = 1.
> + * LMC(0..3)_DLL_CTL2[QUAD_DLL_ENA] must not change after this point
> + * without restarting the LMCn DRESET initialization sequence.
> + */
> +
> + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num));
> + dll_ctl2.cn78xx.quad_dll_ena = 1;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64);
> +
> + /*
> + * 6. Read LMC(0..3)_DLL_CTL2 and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num));
> +
> + /*
> + * 7. Wait a minimum of 10 us.
> + */
> +
> + udelay(10);
> +
> + /*
> + * 8. Without changing any other fields in LMC(0..3)_DLL_CTL2, write
> + * LMC(0..3)_DLL_CTL2[DLL_BRINGUP] = 0.
> + * LMC(0..3)_DLL_CTL2[DLL_BRINGUP] must not change after this point
> + * without restarting the LMCn DRESET initialization sequence.
> + */
> +
> + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num));
> + dll_ctl2.cn78xx.dll_bringup = 0;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64);
> +
> + /*
> + * 9. Read LMC(0..3)_DLL_CTL2 and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num));
> +
> + /*
> + * 10. Without changing any other fields in LMC(0..3)_DLL_CTL2, write
> + * LMC(0..3)_DLL_CTL2[DRESET] = 0.
> + * LMC(0..3)_DLL_CTL2[DRESET] must not change after this point without
> + * restarting the LMCn DRESET initialization sequence.
> + *
> + * After completing LMCn DRESET initialization, all LMC CSRs may be
> + * accessed. Prior to completing LMC DRESET initialization, only
> + * LMC(0..3)_DDR_PLL_CTL, LMC(0..3)_DLL_CTL2, LMC(0..3)_RESET_CTL, and
> + * LMC(0..3)_COMP_CTL2 LMC CSRs can be accessed.
> + */
> +
> + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num));
> + dll_ctl2.cn78xx.dreset = 0;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64);
> +}
> +
> +int initialize_ddr_clock(struct ddr_priv *priv, struct ddr_conf *ddr_conf,
> + u32 cpu_hertz, u32 ddr_hertz, u32 ddr_ref_hertz,
> + int if_num, u32 if_mask)
> +{
> + char *s;
> +
> + if (ddr_clock_initialized(priv, if_num))
> + return 0;
> +
> + if (!ddr_clock_initialized(priv, 0)) { /* Do this once */
> + union cvmx_lmcx_reset_ctl reset_ctl;
> + int i;
> +
> + /*
> + * Check to see if memory is to be preserved and set global
> + * flag
> + */
> + for (i = 3; i >= 0; --i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + reset_ctl.u64 = lmc_rd(priv, CVMX_LMCX_RESET_CTL(i));
> + if (reset_ctl.s.ddr3psv == 1) {
> + debug("LMC%d Preserving memory\n", i);
> + set_ddr_memory_preserved(priv);
> +
> + /* Re-initialize flags */
> + reset_ctl.s.ddr3pwarm = 0;
> + reset_ctl.s.ddr3psoft = 0;
> + reset_ctl.s.ddr3psv = 0;
> + lmc_wr(priv, CVMX_LMCX_RESET_CTL(i),
> + reset_ctl.u64);
> + }
> + }
> + }
> +
> + /*
> + * ToDo: Add support for these SoCs:
> + *
> + * if (octeon_is_cpuid(OCTEON_CN63XX) ||
> + * octeon_is_cpuid(OCTEON_CN66XX) ||
> + * octeon_is_cpuid(OCTEON_CN61XX) || octeon_is_cpuid(OCTEON_CNF71XX))
> + *
> + * and
> + *
> + * if (octeon_is_cpuid(OCTEON_CN68XX))
> + *
> + * and
> + *
> + * if (octeon_is_cpuid(OCTEON_CN70XX))
> + *
> + */
> +
> + if (octeon_is_cpuid(OCTEON_CN78XX) || octeon_is_cpuid(OCTEON_CN73XX) ||
> + octeon_is_cpuid(OCTEON_CNF75XX)) {
> + union cvmx_lmcx_dll_ctl2 dll_ctl2;
> + union cvmx_lmcx_dll_ctl3 ddr_dll_ctl3;
> + union cvmx_lmcx_ddr_pll_ctl ddr_pll_ctl;
> + struct dimm_config *dimm_config_table =
> + ddr_conf->dimm_config_table;
> + int en_idx, save_en_idx, best_en_idx = 0;
> + u64 clkf, clkr, max_clkf = 127;
> + u64 best_clkf = 0, best_clkr = 0;
> + u64 best_pll_MHz = 0;
> + u64 pll_MHz;
> + u64 min_pll_MHz = 800;
> + u64 max_pll_MHz = 5000;
> + u64 error;
> + u64 best_error;
> + u64 best_calculated_ddr_hertz = 0;
> + u64 calculated_ddr_hertz = 0;
> + u64 orig_ddr_hertz = ddr_hertz;
> + const int _en[] = { 1, 2, 3, 4, 5, 6, 7, 8, 10, 12 };
> + int override_pll_settings;
> + int new_bwadj;
> + int ddr_type;
> + int i;
> +
> + /* ddr_type only indicates DDR4 or DDR3 */
> + ddr_type = (read_spd(&dimm_config_table[0], 0,
> + DDR4_SPD_KEY_BYTE_DEVICE_TYPE) ==
> + 0x0C) ? DDR4_DRAM : DDR3_DRAM;
> +
> + /*
> + * 5.9 LMC Initialization Sequence
> + *
> + * There are 13 parts to the LMC initialization procedure:
> + *
> + * 1. DDR PLL initialization
> + *
> + * 2. LMC CK initialization
> + *
> + * 3. LMC interface enable initialization
> + *
> + * 4. LMC DRESET initialization
> + *
> + * 5. LMC CK local initialization
> + *
> + * 6. LMC RESET initialization
> + *
> + * 7. Early LMC initialization
> + *
> + * 8. LMC offset training
> + *
> + * 9. LMC internal Vref training
> + *
> + * 10. LMC deskew training
> + *
> + * 11. LMC write leveling
> + *
> + * 12. LMC read leveling
> + *
> + * 13. Final LMC initialization
> + *
> + * CN78XX supports two modes:
> + *
> + * - two-LMC mode: both LMCs 2/3 must not be enabled
> + * (LMC2/3_DLL_CTL2[DRESET] must be set to 1 and
> + * LMC2/3_DLL_CTL2[INTF_EN]
> + * must be set to 0) and both LMCs 0/1 must be enabled).
> + *
> + * - four-LMC mode: all four LMCs 0..3 must be enabled.
> + *
> + * Steps 4 and 6..13 should each be performed for each
> + * enabled LMC (either twice or four times). Steps 1..3 and
> + * 5 are more global in nature and each must be executed
> + * exactly once (not once per LMC) each time the DDR PLL
> + * changes or is first brought up. Steps 1..3 and 5 need
> + * not be performed if the DDR PLL is stable.
> + *
> + * Generally, the steps are performed in order. The exception
> + * is that the CK local initialization (step 5) must be
> + * performed after some DRESET initializations (step 4) and
> + * before other DRESET initializations when the DDR PLL is
> + * brought up or changed. (The CK local initialization uses
> + * information from some LMCs to bring up the other local
> + * CKs.) The following text describes these ordering
> + * requirements in more detail.
> + *
> + * Following any chip reset, the DDR PLL must be brought up,
> + * and all 13 steps should be executed. Subsequently, it is
> + * possible to execute only steps 4 and 6..13, or to execute
> + * only steps 8..13.
> + *
> + * The remainder of this section covers these initialization
> + * steps in sequence.
> + */
> +
> + /* Do the following init only once */
> + if (if_num != 0)
> + goto not_if0;
> +
> + /* Only for interface #0 ... */
> +
> + /*
> + * 5.9.3 LMC Interface-Enable Initialization
> + *
> + * LMC interface-enable initialization (Step 3) must be#
> + * performed after Step 2 for each chip reset and whenever
> + * the DDR clock speed changes. This step needs to be
> + * performed only once, not once per LMC. Perform the
> + * following three substeps for the LMC interface-enable
> + * initialization:
> + *
> + * 1. Without changing any other LMC2_DLL_CTL2 fields
> + * (LMC(0..3)_DLL_CTL2 should be at their reset values after
> + * Step 1), write LMC2_DLL_CTL2[INTF_EN] = 1 if four-LMC
> + * mode is desired.
> + *
> + * 2. Without changing any other LMC3_DLL_CTL2 fields, write
> + * LMC3_DLL_CTL2[INTF_EN] = 1 if four-LMC mode is desired.
> + *
> + * 3. Read LMC2_DLL_CTL2 and wait for the result.
> + *
> + * The LMC2_DLL_CTL2[INTF_EN] and LMC3_DLL_CTL2[INTF_EN]
> + * values should not be changed by software from this point.
> + */
> +
> + for (i = 0; i < 4; ++i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(i));
> +
> + dll_ctl2.cn78xx.byp_setting = 0;
> + dll_ctl2.cn78xx.byp_sel = 0;
> + dll_ctl2.cn78xx.quad_dll_ena = 0;
> + dll_ctl2.cn78xx.dreset = 1;
> + dll_ctl2.cn78xx.dll_bringup = 0;
> + dll_ctl2.cn78xx.intf_en = 0;
> +
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(i), dll_ctl2.u64);
> + }
> +
> + /*
> + * ###### Interface enable (intf_en) deferred until after
> + * DDR_DIV_RESET=0 #######
> + */
> +
> + /*
> + * 5.9.1 DDR PLL Initialization
> + *
> + * DDR PLL initialization (Step 1) must be performed for each
> + * chip reset and whenever the DDR clock speed changes. This
> + * step needs to be performed only once, not once per LMC.
> + *
> + * Perform the following eight substeps to initialize the
> + * DDR PLL:
> + *
> + * 1. If not done already, write all fields in
> + * LMC(0..3)_DDR_PLL_CTL and
> + * LMC(0..1)_DLL_CTL2 to their reset values, including:
> + *
> + * .. LMC0_DDR_PLL_CTL[DDR_DIV_RESET] = 1
> + * .. LMC0_DLL_CTL2[DRESET] = 1
> + *
> + * This substep is not necessary after a chip reset.
> + *
> + */
> +
> + ddr_pll_ctl.u64 = lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(0));
> +
> + ddr_pll_ctl.cn78xx.reset_n = 0;
> + ddr_pll_ctl.cn78xx.ddr_div_reset = 1;
> + ddr_pll_ctl.cn78xx.phy_dcok = 0;
> +
> + /*
> + * 73XX pass 1.3 has LMC0 DCLK_INVERT tied to 1; earlier
> + * 73xx passes are tied to 0
> + *
> + * 75XX needs LMC0 DCLK_INVERT set to 1 to minimize duty
> + * cycle falling points
> + *
> + * and we default all other chips LMC0 to DCLK_INVERT=0
> + */
> + ddr_pll_ctl.cn78xx.dclk_invert =
> + !!(octeon_is_cpuid(OCTEON_CN73XX_PASS1_3) ||
> + octeon_is_cpuid(OCTEON_CNF75XX));
> +
> + /*
> + * allow override of LMC0 desired setting for DCLK_INVERT,
> + * but not on 73XX;
> + * we cannot change LMC0 DCLK_INVERT on 73XX any pass
> + */
> + if (!(octeon_is_cpuid(OCTEON_CN73XX))) {
> + s = lookup_env(priv, "ddr0_set_dclk_invert");
> + if (s) {
> + ddr_pll_ctl.cn78xx.dclk_invert =
> + !!simple_strtoul(s, NULL, 0);
> + debug("LMC0: override DDR_PLL_CTL[dclk_invert] to %d\n",
> + ddr_pll_ctl.cn78xx.dclk_invert);
> + }
> + }
> +
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(0), ddr_pll_ctl.u64);
> + debug("%-45s : 0x%016llx\n", "LMC0: DDR_PLL_CTL",
> + ddr_pll_ctl.u64);
> +
> + // only when LMC1 is active
> + if (if_mask & 0x2) {
> + /*
> + * For CNF75XX, both LMC0 and LMC1 use the same PLL,
> + * so we use the LMC0 setting of DCLK_INVERT for LMC1.
> + */
> + if (!octeon_is_cpuid(OCTEON_CNF75XX)) {
> + int override = 0;
> +
> + /*
> + * by default, for non-CNF75XX, we want
> + * LMC1 toggled LMC0
> + */
> + int lmc0_dclk_invert =
> + ddr_pll_ctl.cn78xx.dclk_invert;
> +
> + /*
> + * FIXME: work-around for DDR3 UDIMM problems
> + * is to use LMC0 setting on LMC1 and if
> + * 73xx pass 1.3, we want to default LMC1
> + * DCLK_INVERT to LMC0, not the invert of LMC0
> + */
> + int lmc1_dclk_invert;
> +
> + lmc1_dclk_invert =
> + ((ddr_type == DDR4_DRAM) &&
> + !octeon_is_cpuid(OCTEON_CN73XX_PASS1_3))
> + ? lmc0_dclk_invert ^ 1 :
> + lmc0_dclk_invert;
> +
> + /*
> + * allow override of LMC1 desired setting for
> + * DCLK_INVERT
> + */
> + s = lookup_env(priv, "ddr1_set_dclk_invert");
> + if (s) {
> + lmc1_dclk_invert =
> + !!simple_strtoul(s, NULL, 0);
> + override = 1;
> + }
> + debug("LMC1: %s DDR_PLL_CTL[dclk_invert] to %d (LMC0 %d)\n",
> + (override) ? "override" :
> + "default", lmc1_dclk_invert,
> + lmc0_dclk_invert);
> +
> + ddr_pll_ctl.cn78xx.dclk_invert =
> + lmc1_dclk_invert;
> + }
> +
> + // but always write LMC1 CSR if it is active
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(1), ddr_pll_ctl.u64);
> + debug("%-45s : 0x%016llx\n",
> + "LMC1: DDR_PLL_CTL", ddr_pll_ctl.u64);
> + }
> +
> + /*
> + * 2. If the current DRAM contents are not preserved (see
> + * LMC(0..3)_RESET_ CTL[DDR3PSV]), this is also an appropriate
> + * time to assert the RESET# pin of the DDR3/DDR4 DRAM parts.
> + * If desired, write
> + * LMC0_RESET_ CTL[DDR3RST] = 0 without modifying any other
> + * LMC0_RESET_CTL fields to assert the DDR_RESET_L pin.
> + * No action is required here to assert DDR_RESET_L
> + * following a chip reset. Refer to Section 5.9.6. Do this
> + * for all enabled LMCs.
> + */
> +
> + for (i = 0; (!ddr_memory_preserved(priv)) && i < 4; ++i) {
> + union cvmx_lmcx_reset_ctl reset_ctl;
> +
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + reset_ctl.u64 = lmc_rd(priv, CVMX_LMCX_RESET_CTL(i));
> + reset_ctl.cn78xx.ddr3rst = 0; /* Reset asserted */
> + debug("LMC%d Asserting DDR_RESET_L\n", i);
> + lmc_wr(priv, CVMX_LMCX_RESET_CTL(i), reset_ctl.u64);
> + lmc_rd(priv, CVMX_LMCX_RESET_CTL(i));
> + }
> +
> + /*
> + * 3. Without changing any other LMC0_DDR_PLL_CTL values,
> + * write LMC0_DDR_PLL_CTL[CLKF] with a value that gives a
> + * desired DDR PLL speed. The LMC0_DDR_PLL_CTL[CLKF] value
> + * should be selected in conjunction with the post-scalar
> + * divider values for LMC (LMC0_DDR_PLL_CTL[DDR_PS_EN]) so
> + * that the desired LMC CK speeds are is produced (all
> + * enabled LMCs must run the same speed). Section 5.14
> + * describes LMC0_DDR_PLL_CTL[CLKF] and
> + * LMC0_DDR_PLL_CTL[DDR_PS_EN] programmings that produce
> + * the desired LMC CK speed. Section 5.9.2 describes LMC CK
> + * initialization, which can be done separately from the DDR
> + * PLL initialization described in this section.
> + *
> + * The LMC0_DDR_PLL_CTL[CLKF] value must not change after
> + * this point without restarting this SDRAM PLL
> + * initialization sequence.
> + */
> +
> + /* Init to max error */
> + error = ddr_hertz;
> + best_error = ddr_hertz;
> +
> + debug("DDR Reference Hertz = %d\n", ddr_ref_hertz);
> +
> + while (best_error == ddr_hertz) {
> + for (clkr = 0; clkr < 4; ++clkr) {
> + for (en_idx =
> + sizeof(_en) / sizeof(int) -
> + 1; en_idx >= 0; --en_idx) {
> + save_en_idx = en_idx;
> + clkf =
> + ((ddr_hertz) *
> + (clkr + 1) * (_en[save_en_idx]));
> + clkf = divide_nint(clkf, ddr_ref_hertz)
> + - 1;
> + pll_MHz =
> + ddr_ref_hertz *
> + (clkf + 1) / (clkr + 1) / 1000000;
> + calculated_ddr_hertz =
> + ddr_ref_hertz *
> + (clkf +
> + 1) / ((clkr +
> + 1) * (_en[save_en_idx]));
> + error =
> + ddr_hertz - calculated_ddr_hertz;
> +
> + if (pll_MHz < min_pll_MHz ||
> + pll_MHz > max_pll_MHz)
> + continue;
> + if (clkf > max_clkf) {
> + /*
> + * PLL requires clkf to be
> + * limited
> + */
> + continue;
> + }
> + if (abs(error) > abs(best_error))
> + continue;
> +
> + debug("clkr: %2llu, en[%d]: %2d, clkf: %4llu, pll_MHz: %4llu, ddr_hertz: %8llu, error: %8lld\n",
> + clkr, save_en_idx,
> + _en[save_en_idx], clkf, pll_MHz,
> + calculated_ddr_hertz, error);
> +
> + /* Favor the highest PLL frequency. */
> + if (abs(error) < abs(best_error) ||
> + pll_MHz > best_pll_MHz) {
> + best_pll_MHz = pll_MHz;
> + best_calculated_ddr_hertz =
> + calculated_ddr_hertz;
> + best_error = error;
> + best_clkr = clkr;
> + best_clkf = clkf;
> + best_en_idx = save_en_idx;
> + }
> + }
> + }
> +
> + override_pll_settings = 0;
> +
> + s = lookup_env(priv, "ddr_pll_clkr");
> + if (s) {
> + best_clkr = simple_strtoul(s, NULL, 0);
> + override_pll_settings = 1;
> + }
> +
> + s = lookup_env(priv, "ddr_pll_clkf");
> + if (s) {
> + best_clkf = simple_strtoul(s, NULL, 0);
> + override_pll_settings = 1;
> + }
> +
> + s = lookup_env(priv, "ddr_pll_en_idx");
> + if (s) {
> + best_en_idx = simple_strtoul(s, NULL, 0);
> + override_pll_settings = 1;
> + }
> +
> + if (override_pll_settings) {
> + best_pll_MHz =
> + ddr_ref_hertz * (best_clkf +
> + 1) /
> + (best_clkr + 1) / 1000000;
> + best_calculated_ddr_hertz =
> + ddr_ref_hertz * (best_clkf +
> + 1) /
> + ((best_clkr + 1) * (_en[best_en_idx]));
> + best_error =
> + ddr_hertz - best_calculated_ddr_hertz;
> + }
> +
> + debug("clkr: %2llu, en[%d]: %2d, clkf: %4llu, pll_MHz: %4llu, ddr_hertz: %8llu, error: %8lld <==\n",
> + best_clkr, best_en_idx, _en[best_en_idx],
> + best_clkf, best_pll_MHz,
> + best_calculated_ddr_hertz, best_error);
> +
> + /*
> + * Try lowering the frequency if we can't get a
> + * working configuration
> + */
> + if (best_error == ddr_hertz) {
> + if (ddr_hertz < orig_ddr_hertz - 10000000)
> + break;
> + ddr_hertz -= 1000000;
> + best_error = ddr_hertz;
> + }
> + }
> +
> + if (best_error == ddr_hertz) {
> + printf("ERROR: Can not compute a legal DDR clock speed configuration.\n");
> + return -1;
> + }
> +
> + new_bwadj = (best_clkf + 1) / 10;
> + debug("bwadj: %2d\n", new_bwadj);
> +
> + s = lookup_env(priv, "ddr_pll_bwadj");
> + if (s) {
> + new_bwadj = strtoul(s, NULL, 0);
> + debug("bwadj: %2d\n", new_bwadj);
> + }
> +
> + for (i = 0; i < 2; ++i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + ddr_pll_ctl.u64 =
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> + debug("LMC%d: DDR_PLL_CTL : 0x%016llx\n",
> + i, ddr_pll_ctl.u64);
> +
> + ddr_pll_ctl.cn78xx.ddr_ps_en = best_en_idx;
> + ddr_pll_ctl.cn78xx.clkf = best_clkf;
> + ddr_pll_ctl.cn78xx.clkr = best_clkr;
> + ddr_pll_ctl.cn78xx.reset_n = 0;
> + ddr_pll_ctl.cn78xx.bwadj = new_bwadj;
> +
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64);
> + debug("LMC%d: DDR_PLL_CTL : 0x%016llx\n",
> + i, ddr_pll_ctl.u64);
> +
> + /*
> + * For cnf75xx LMC0 and LMC1 use the same PLL so
> + * only program LMC0 PLL.
> + */
> + if (octeon_is_cpuid(OCTEON_CNF75XX))
> + break;
> + }
> +
> + for (i = 0; i < 4; ++i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + /*
> + * 4. Read LMC0_DDR_PLL_CTL and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> +
> + /*
> + * 5. Wait a minimum of 3 us.
> + */
> +
> + udelay(3); /* Wait 3 us */
> +
> + /*
> + * 6. Write LMC0_DDR_PLL_CTL[RESET_N] = 1 without
> + * changing any other LMC0_DDR_PLL_CTL values.
> + */
> +
> + ddr_pll_ctl.u64 =
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> + ddr_pll_ctl.cn78xx.reset_n = 1;
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64);
> +
> + /*
> + * 7. Read LMC0_DDR_PLL_CTL and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> +
> + /*
> + * 8. Wait a minimum of 25 us.
> + */
> +
> + udelay(25); /* Wait 25 us */
> +
> + /*
> + * For cnf75xx LMC0 and LMC1 use the same PLL so
> + * only program LMC0 PLL.
> + */
> + if (octeon_is_cpuid(OCTEON_CNF75XX))
> + break;
> + }
> +
> + for (i = 0; i < 4; ++i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + /*
> + * 5.9.2 LMC CK Initialization
> + *
> + * DDR PLL initialization must be completed prior to
> + * starting LMC CK initialization.
> + *
> + * Perform the following substeps to initialize the
> + * LMC CK:
> + *
> + * 1. Without changing any other LMC(0..3)_DDR_PLL_CTL
> + * values, write
> + * LMC(0..3)_DDR_PLL_CTL[DDR_DIV_RESET] = 1 and
> + * LMC(0..3)_DDR_PLL_CTL[DDR_PS_EN] with the
> + * appropriate value to get the desired LMC CK speed.
> + * Section 5.14 discusses CLKF and DDR_PS_EN
> + * programmings. The LMC(0..3)_DDR_PLL_CTL[DDR_PS_EN]
> + * must not change after this point without restarting
> + * this LMC CK initialization sequence.
> + */
> +
> + ddr_pll_ctl.u64 = lmc_rd(priv,
> + CVMX_LMCX_DDR_PLL_CTL(i));
> + ddr_pll_ctl.cn78xx.ddr_div_reset = 1;
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64);
> +
> + /*
> + * 2. Without changing any other fields in
> + * LMC(0..3)_DDR_PLL_CTL, write
> + * LMC(0..3)_DDR_PLL_CTL[DDR4_MODE] = 0.
> + */
> +
> + ddr_pll_ctl.u64 =
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> + ddr_pll_ctl.cn78xx.ddr4_mode =
> + (ddr_type == DDR4_DRAM) ? 1 : 0;
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64);
> +
> + /*
> + * 3. Read LMC(0..3)_DDR_PLL_CTL and wait for the
> + * result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> +
> + /*
> + * 4. Wait a minimum of 1 us.
> + */
> +
> + udelay(1); /* Wait 1 us */
> +
> + /*
> + * ###### Steps 5 through 7 deferred until after
> + * DDR_DIV_RESET=0 #######
> + */
> +
> + /*
> + * 8. Without changing any other LMC(0..3)_COMP_CTL2
> + * values, write
> + * LMC(0..3)_COMP_CTL2[CK_CTL,CONTROL_CTL,CMD_CTL]
> + * to the desired DDR*_CK_*_P control and command
> + * signals drive strength.
> + */
> +
> + union cvmx_lmcx_comp_ctl2 comp_ctl2;
> + const struct ddr3_custom_config *custom_lmc_config =
> + &ddr_conf->custom_lmc_config;
> +
> + comp_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_COMP_CTL2(i));
> +
> + /* Default 4=34.3 ohm */
> + comp_ctl2.cn78xx.dqx_ctl =
> + (custom_lmc_config->dqx_ctl ==
> + 0) ? 4 : custom_lmc_config->dqx_ctl;
> + /* Default 4=34.3 ohm */
> + comp_ctl2.cn78xx.ck_ctl =
> + (custom_lmc_config->ck_ctl ==
> + 0) ? 4 : custom_lmc_config->ck_ctl;
> + /* Default 4=34.3 ohm */
> + comp_ctl2.cn78xx.cmd_ctl =
> + (custom_lmc_config->cmd_ctl ==
> + 0) ? 4 : custom_lmc_config->cmd_ctl;
> +
> + comp_ctl2.cn78xx.rodt_ctl = 0x4; /* 60 ohm */
> +
> + comp_ctl2.cn70xx.ptune_offset =
> + (abs(custom_lmc_config->ptune_offset) & 0x7)
> + | (_sign(custom_lmc_config->ptune_offset) << 3);
> + comp_ctl2.cn70xx.ntune_offset =
> + (abs(custom_lmc_config->ntune_offset) & 0x7)
> + | (_sign(custom_lmc_config->ntune_offset) << 3);
> +
> + s = lookup_env(priv, "ddr_clk_ctl");
> + if (s) {
> + comp_ctl2.cn78xx.ck_ctl =
> + simple_strtoul(s, NULL, 0);
> + }
> +
> + s = lookup_env(priv, "ddr_ck_ctl");
> + if (s) {
> + comp_ctl2.cn78xx.ck_ctl =
> + simple_strtoul(s, NULL, 0);
> + }
> +
> + s = lookup_env(priv, "ddr_cmd_ctl");
> + if (s) {
> + comp_ctl2.cn78xx.cmd_ctl =
> + simple_strtoul(s, NULL, 0);
> + }
> +
> + s = lookup_env(priv, "ddr_dqx_ctl");
> + if (s) {
> + comp_ctl2.cn78xx.dqx_ctl =
> + simple_strtoul(s, NULL, 0);
> + }
> +
> + s = lookup_env(priv, "ddr_ptune_offset");
> + if (s) {
> + comp_ctl2.cn78xx.ptune_offset =
> + simple_strtoul(s, NULL, 0);
> + }
> +
> + s = lookup_env(priv, "ddr_ntune_offset");
> + if (s) {
> + comp_ctl2.cn78xx.ntune_offset =
> + simple_strtoul(s, NULL, 0);
> + }
> +
> + lmc_wr(priv, CVMX_LMCX_COMP_CTL2(i), comp_ctl2.u64);
> +
> + /*
> + * 9. Read LMC(0..3)_DDR_PLL_CTL and wait for the
> + * result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> +
> + /*
> + * 10. Wait a minimum of 200 ns.
> + */
> +
> + udelay(1); /* Wait 1 us */
> +
> + /*
> + * 11. Without changing any other
> + * LMC(0..3)_DDR_PLL_CTL values, write
> + * LMC(0..3)_DDR_PLL_CTL[DDR_DIV_RESET] = 0.
> + */
> +
> + ddr_pll_ctl.u64 = lmc_rd(priv,
> + CVMX_LMCX_DDR_PLL_CTL(i));
> + ddr_pll_ctl.cn78xx.ddr_div_reset = 0;
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64);
> +
> + /*
> + * 12. Read LMC(0..3)_DDR_PLL_CTL and wait for the
> + * result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> +
> + /*
> + * 13. Wait a minimum of 200 ns.
> + */
> +
> + udelay(1); /* Wait 1 us */
> + }
> +
> + /*
> + * Relocated Interface Enable (intf_en) Step
> + */
> + for (i = (octeon_is_cpuid(OCTEON_CN73XX) ||
> + octeon_is_cpuid(OCTEON_CNF75XX)) ? 1 : 2;
> + i < 4; ++i) {
> + /*
> + * This step is only necessary for LMC 2 and 3 in
> + * 4-LMC mode. The mask will cause the unpopulated
> + * interfaces to be skipped.
> + */
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(i));
> + dll_ctl2.cn78xx.intf_en = 1;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(i), dll_ctl2.u64);
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(i));
> + }
> +
> + /*
> + * Relocated PHY_DCOK Step
> + */
> + for (i = 0; i < 4; ++i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> + /*
> + * 5. Without changing any other fields in
> + * LMC(0..3)_DDR_PLL_CTL, write
> + * LMC(0..3)_DDR_PLL_CTL[PHY_DCOK] = 1.
> + */
> +
> + ddr_pll_ctl.u64 = lmc_rd(priv,
> + CVMX_LMCX_DDR_PLL_CTL(i));
> + ddr_pll_ctl.cn78xx.phy_dcok = 1;
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64);
> + /*
> + * 6. Read LMC(0..3)_DDR_PLL_CTL and wait for
> + * the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i));
> +
> + /*
> + * 7. Wait a minimum of 20 us.
> + */
> +
> + udelay(20); /* Wait 20 us */
> + }
> +
> + /*
> + * 5.9.4 LMC DRESET Initialization
> + *
> + * All of the DDR PLL, LMC global CK, and LMC interface
> + * enable initializations must be completed prior to starting
> + * this LMC DRESET initialization (Step 4).
> + *
> + * This LMC DRESET step is done for all enabled LMCs.
> + *
> + * There are special constraints on the ordering of DRESET
> + * initialization (Steps 4) and CK local initialization
> + * (Step 5) whenever CK local initialization must be executed.
> + * CK local initialization must be executed whenever the DDR
> + * PLL is being brought up (for each chip reset* and whenever
> + * the DDR clock speed changes).
> + *
> + * When Step 5 must be executed in the two-LMC mode case:
> + * - LMC0 DRESET initialization must occur before Step 5.
> + * - LMC1 DRESET initialization must occur after Step 5.
> + *
> + * When Step 5 must be executed in the four-LMC mode case:
> + * - LMC2 and LMC3 DRESET initialization must occur before
> + * Step 5.
> + * - LMC0 and LMC1 DRESET initialization must occur after
> + * Step 5.
> + */
> +
> + if (octeon_is_cpuid(OCTEON_CN73XX)) {
> + /* ONE-LMC or TWO-LMC MODE BEFORE STEP 5 for cn73xx */
> + cn78xx_lmc_dreset_init(priv, 0);
> + } else if (octeon_is_cpuid(OCTEON_CNF75XX)) {
> + if (if_mask == 0x3) {
> + /*
> + * 2-LMC Mode: LMC1 DRESET must occur
> + * before Step 5
> + */
> + cn78xx_lmc_dreset_init(priv, 1);
> + }
> + } else {
> + /* TWO-LMC MODE DRESET BEFORE STEP 5 */
> + if (if_mask == 0x3)
> + cn78xx_lmc_dreset_init(priv, 0);
> +
> + /* FOUR-LMC MODE BEFORE STEP 5 */
> + if (if_mask == 0xf) {
> + cn78xx_lmc_dreset_init(priv, 2);
> + cn78xx_lmc_dreset_init(priv, 3);
> + }
> + }
> +
> + /*
> + * 5.9.5 LMC CK Local Initialization
> + *
> + * All of DDR PLL, LMC global CK, and LMC interface-enable
> + * initializations must be completed prior to starting this
> + * LMC CK local initialization (Step 5).
> + *
> + * LMC CK Local initialization must be performed for each
> + * chip reset and whenever the DDR clock speed changes. This
> + * step needs to be performed only once, not once per LMC.
> + *
> + * There are special constraints on the ordering of DRESET
> + * initialization (Steps 4) and CK local initialization
> + * (Step 5) whenever CK local initialization must be executed.
> + * CK local initialization must be executed whenever the
> + * DDR PLL is being brought up (for each chip reset and
> + * whenever the DDR clock speed changes).
> + *
> + * When Step 5 must be executed in the two-LMC mode case:
> + * - LMC0 DRESET initialization must occur before Step 5.
> + * - LMC1 DRESET initialization must occur after Step 5.
> + *
> + * When Step 5 must be executed in the four-LMC mode case:
> + * - LMC2 and LMC3 DRESET initialization must occur before
> + * Step 5.
> + * - LMC0 and LMC1 DRESET initialization must occur after
> + * Step 5.
> + *
> + * LMC CK local initialization is different depending on
> + * whether two-LMC or four-LMC modes are desired.
> + */
> +
> + if (if_mask == 0x3) {
> + int temp_lmc_if_num = octeon_is_cpuid(OCTEON_CNF75XX) ?
> + 1 : 0;
> +
> + /*
> + * 5.9.5.1 LMC CK Local Initialization for Two-LMC
> + * Mode
> + *
> + * 1. Write LMC0_DLL_CTL3 to its reset value. (Note
> + * that LMC0_DLL_CTL3[DLL_90_BYTE_SEL] = 0x2 .. 0x8
> + * should also work.)
> + */
> +
> + ddr_dll_ctl3.u64 = 0;
> + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1;
> +
> + if (octeon_is_cpuid(OCTEON_CNF75XX))
> + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 7;
> + else
> + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 1;
> +
> + lmc_wr(priv,
> + CVMX_LMCX_DLL_CTL3(temp_lmc_if_num),
> + ddr_dll_ctl3.u64);
> +
> + /*
> + * 2. Read LMC0_DLL_CTL3 and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(temp_lmc_if_num));
> +
> + /*
> + * 3. Without changing any other fields in
> + * LMC0_DLL_CTL3, write
> + * LMC0_DLL_CTL3[DCLK90_FWD] = 1. Writing
> + * LMC0_DLL_CTL3[DCLK90_FWD] = 1
> + * causes clock-delay information to be forwarded
> + * from LMC0 to LMC1.
> + */
> +
> + ddr_dll_ctl3.cn78xx.dclk90_fwd = 1;
> + lmc_wr(priv,
> + CVMX_LMCX_DLL_CTL3(temp_lmc_if_num),
> + ddr_dll_ctl3.u64);
> +
> + /*
> + * 4. Read LMC0_DLL_CTL3 and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(temp_lmc_if_num));
> + }
> +
> + if (if_mask == 0xf) {
> + /*
> + * 5.9.5.2 LMC CK Local Initialization for Four-LMC
> + * Mode
> + *
> + * 1. Write LMC2_DLL_CTL3 to its reset value except
> + * LMC2_DLL_CTL3[DLL90_BYTE_SEL] = 0x7.
> + */
> +
> + ddr_dll_ctl3.u64 = 0;
> + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1;
> + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 7;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(2), ddr_dll_ctl3.u64);
> +
> + /*
> + * 2. Write LMC3_DLL_CTL3 to its reset value except
> + * LMC3_DLL_CTL3[DLL90_BYTE_SEL] = 0x2.
> + */
> +
> + ddr_dll_ctl3.u64 = 0;
> + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1;
> + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 2;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(3), ddr_dll_ctl3.u64);
> +
> + /*
> + * 3. Read LMC3_DLL_CTL3 and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(3));
> +
> + /*
> + * 4. Without changing any other fields in
> + * LMC2_DLL_CTL3, write LMC2_DLL_CTL3[DCLK90_FWD] = 1
> + * and LMC2_DLL_CTL3[DCLK90_RECAL_ DIS] = 1.
> + * Writing LMC2_DLL_CTL3[DCLK90_FWD] = 1 causes LMC 2
> + * to forward clockdelay information to LMC0. Setting
> + * LMC2_DLL_CTL3[DCLK90_RECAL_DIS] to 1 prevents LMC2
> + * from periodically recalibrating this delay
> + * information.
> + */
> +
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(2));
> + ddr_dll_ctl3.cn78xx.dclk90_fwd = 1;
> + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(2), ddr_dll_ctl3.u64);
> +
> + /*
> + * 5. Without changing any other fields in
> + * LMC3_DLL_CTL3, write LMC3_DLL_CTL3[DCLK90_FWD] = 1
> + * and LMC3_DLL_CTL3[DCLK90_RECAL_ DIS] = 1.
> + * Writing LMC3_DLL_CTL3[DCLK90_FWD] = 1 causes LMC3
> + * to forward clockdelay information to LMC1. Setting
> + * LMC3_DLL_CTL3[DCLK90_RECAL_DIS] to 1 prevents LMC3
> + * from periodically recalibrating this delay
> + * information.
> + */
> +
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(3));
> + ddr_dll_ctl3.cn78xx.dclk90_fwd = 1;
> + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(3), ddr_dll_ctl3.u64);
> +
> + /*
> + * 6. Read LMC3_DLL_CTL3 and wait for the result.
> + */
> +
> + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(3));
> + }
> +
> + if (octeon_is_cpuid(OCTEON_CNF75XX)) {
> + /*
> + * cnf75xx 2-LMC Mode: LMC0 DRESET must occur after
> + * Step 5, Do LMC0 for 1-LMC Mode here too
> + */
> + cn78xx_lmc_dreset_init(priv, 0);
> + }
> +
> + /* TWO-LMC MODE AFTER STEP 5 */
> + if (if_mask == 0x3) {
> + if (octeon_is_cpuid(OCTEON_CNF75XX)) {
> + /*
> + * cnf75xx 2-LMC Mode: LMC0 DRESET must
> + * occur after Step 5
> + */
> + cn78xx_lmc_dreset_init(priv, 0);
> + } else {
> + cn78xx_lmc_dreset_init(priv, 1);
> + }
> + }
> +
> + /* FOUR-LMC MODE AFTER STEP 5 */
> + if (if_mask == 0xf) {
> + cn78xx_lmc_dreset_init(priv, 0);
> + cn78xx_lmc_dreset_init(priv, 1);
> +
> + /*
> + * Enable periodic recalibration of DDR90 delay
> + * line in.
> + */
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(0));
> + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 0;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(0), ddr_dll_ctl3.u64);
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(1));
> + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 0;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(1), ddr_dll_ctl3.u64);
> + }
> +
> + /* Enable fine tune mode for all LMCs */
> + for (i = 0; i < 4; ++i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(i));
> + ddr_dll_ctl3.cn78xx.fine_tune_mode = 1;
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(i), ddr_dll_ctl3.u64);
> + }
> +
> + /*
> + * Enable the trim circuit on the appropriate channels to
> + * adjust the DDR clock duty cycle for chips that support
> + * it
> + */
> + if (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X) ||
> + octeon_is_cpuid(OCTEON_CN73XX) ||
> + octeon_is_cpuid(OCTEON_CNF75XX)) {
> + union cvmx_lmcx_phy_ctl lmc_phy_ctl;
> + int i;
> +
> + for (i = 0; i < 4; ++i) {
> + if ((if_mask & (1 << i)) == 0)
> + continue;
> +
> + lmc_phy_ctl.u64 =
> + lmc_rd(priv, CVMX_LMCX_PHY_CTL(i));
> +
> + if (octeon_is_cpuid(OCTEON_CNF75XX) ||
> + octeon_is_cpuid(OCTEON_CN73XX_PASS1_3)) {
> + /* Both LMCs */
> + lmc_phy_ctl.s.lv_mode = 0;
> + } else {
> + /* Odd LMCs = 0, Even LMCs = 1 */
> + lmc_phy_ctl.s.lv_mode = (~i) & 1;
> + }
> +
> + debug("LMC%d: PHY_CTL : 0x%016llx\n",
> + i, lmc_phy_ctl.u64);
> + lmc_wr(priv, CVMX_LMCX_PHY_CTL(i),
> + lmc_phy_ctl.u64);
> + }
> + }
> + }
> +
> + /*
> + * 5.9.6 LMC RESET Initialization
> + *
> + * NOTE: this is now done as the first step in
> + * init_octeon3_ddr3_interface, rather than the last step in clock
> + * init. This reorg allows restarting per-LMC initialization should
> + * problems be encountered, rather than being forced to resort to
> + * resetting the chip and starting all over.
> + *
> + * Look for the code in octeon3_lmc.c: perform_lmc_reset().
> + */
> +
> + /* Fallthrough for all interfaces... */
> +not_if0:
> +
> + /*
> + * Start the DDR clock so that its frequency can be measured.
> + * For some chips we must activate the memory controller with
> + * init_start to make the DDR clock start to run.
> + */
> + if ((!octeon_is_cpuid(OCTEON_CN6XXX)) &&
> + (!octeon_is_cpuid(OCTEON_CNF7XXX)) &&
> + (!octeon_is_cpuid(OCTEON_CN7XXX))) {
> + union cvmx_lmcx_mem_cfg0 mem_cfg0;
> +
> + mem_cfg0.u64 = 0;
> + mem_cfg0.s.init_start = 1;
> + lmc_wr(priv, CVMX_LMCX_MEM_CFG0(if_num), mem_cfg0.u64);
> + lmc_rd(priv, CVMX_LMCX_MEM_CFG0(if_num));
> + }
> +
> + set_ddr_clock_initialized(priv, if_num, 1);
> +
> + return 0;
> +}
> +
> +static void octeon_ipd_delay_cycles(u64 cycles)
> +{
> + u64 start = csr_rd(CVMX_IPD_CLK_COUNT);
> +
> + while (start + cycles > csr_rd(CVMX_IPD_CLK_COUNT))
> + ;
> +}
> +
> +static void octeon_ipd_delay_cycles_o3(u64 cycles)
> +{
> + u64 start = csr_rd(CVMX_FPA_CLK_COUNT);
> +
> + while (start + cycles > csr_rd(CVMX_FPA_CLK_COUNT))
> + ;
> +}
> +
> +static u32 measure_octeon_ddr_clock(struct ddr_priv *priv,
> + struct ddr_conf *ddr_conf, u32 cpu_hertz,
> + u32 ddr_hertz, u32 ddr_ref_hertz,
> + int if_num, u32 if_mask)
> +{
> + u64 core_clocks;
> + u64 ddr_clocks;
> + u64 calc_ddr_hertz;
> +
> + if (ddr_conf) {
> + if (initialize_ddr_clock(priv, ddr_conf, cpu_hertz,
> + ddr_hertz, ddr_ref_hertz, if_num,
> + if_mask) != 0)
> + return 0;
> + }
> +
> + /* Dynamically determine the DDR clock speed */
> + if (OCTEON_IS_OCTEON2() || octeon_is_cpuid(OCTEON_CN70XX)) {
> + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT);
> + ddr_clocks = lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num));
> + /* How many cpu cycles to measure over */
> + octeon_ipd_delay_cycles(100000000);
> + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT) - core_clocks;
> + ddr_clocks =
> + lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num)) - ddr_clocks;
> + calc_ddr_hertz = ddr_clocks * gd->bus_clk / core_clocks;
> + } else if (octeon_is_cpuid(OCTEON_CN7XXX)) {
> + core_clocks = csr_rd(CVMX_FPA_CLK_COUNT);
> + ddr_clocks = lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num));
> + /* How many cpu cycles to measure over */
> + octeon_ipd_delay_cycles_o3(100000000);
> + core_clocks = csr_rd(CVMX_FPA_CLK_COUNT) - core_clocks;
> + ddr_clocks =
> + lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num)) - ddr_clocks;
> + calc_ddr_hertz = ddr_clocks * gd->bus_clk / core_clocks;
> + } else {
> + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT);
> + /*
> + * ignore overflow, starts counting when we enable the
> + * controller
> + */
> + ddr_clocks = lmc_rd(priv, CVMX_LMCX_DCLK_CNT_LO(if_num));
> + /* How many cpu cycles to measure over */
> + octeon_ipd_delay_cycles(100000000);
> + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT) - core_clocks;
> + ddr_clocks =
> + lmc_rd(priv, CVMX_LMCX_DCLK_CNT_LO(if_num)) - ddr_clocks;
> + calc_ddr_hertz = ddr_clocks * cpu_hertz / core_clocks;
> + }
> +
> + debug("core clocks: %llu, ddr clocks: %llu, calc rate: %llu\n",
> + core_clocks, ddr_clocks, calc_ddr_hertz);
> + debug("LMC%d: Measured DDR clock: %lld, cpu clock: %u, ddr clocks: %llu\n",
> + if_num, calc_ddr_hertz, cpu_hertz, ddr_clocks);
> +
> + /* Check for unreasonable settings. */
> + if (calc_ddr_hertz < 10000) {
> + udelay(8000000 * 100);
> + printf("DDR clock misconfigured on interface %d. Resetting...\n",
> + if_num);
> + do_reset(NULL, 0, 0, NULL);
> + }
> +
> + return calc_ddr_hertz;
> +}
> +
> +u64 lmc_ddr3_rl_dbg_read(struct ddr_priv *priv, int if_num, int idx)
> +{
> + union cvmx_lmcx_rlevel_dbg rlevel_dbg;
> + union cvmx_lmcx_rlevel_ctl rlevel_ctl;
> +
> + rlevel_ctl.u64 = lmc_rd(priv, CVMX_LMCX_RLEVEL_CTL(if_num));
> + rlevel_ctl.s.byte = idx;
> +
> + lmc_wr(priv, CVMX_LMCX_RLEVEL_CTL(if_num), rlevel_ctl.u64);
> + lmc_rd(priv, CVMX_LMCX_RLEVEL_CTL(if_num));
> +
> + rlevel_dbg.u64 = lmc_rd(priv, CVMX_LMCX_RLEVEL_DBG(if_num));
> + return rlevel_dbg.s.bitmask;
> +}
> +
> +u64 lmc_ddr3_wl_dbg_read(struct ddr_priv *priv, int if_num, int idx)
> +{
> + union cvmx_lmcx_wlevel_dbg wlevel_dbg;
> +
> + wlevel_dbg.u64 = 0;
> + wlevel_dbg.s.byte = idx;
> +
> + lmc_wr(priv, CVMX_LMCX_WLEVEL_DBG(if_num), wlevel_dbg.u64);
> + lmc_rd(priv, CVMX_LMCX_WLEVEL_DBG(if_num));
> +
> + wlevel_dbg.u64 = lmc_rd(priv, CVMX_LMCX_WLEVEL_DBG(if_num));
> + return wlevel_dbg.s.bitmask;
> +}
> +
> +int validate_ddr3_rlevel_bitmask(struct rlevel_bitmask *rlevel_bitmask_p,
> + int ddr_type)
> +{
> + int i;
> + int errors = 0;
> + u64 mask = 0; /* Used in 64-bit comparisons */
> + u8 mstart = 0;
> + u8 width = 0;
> + u8 firstbit = 0;
> + u8 lastbit = 0;
> + u8 bubble = 0;
> + u8 tbubble = 0;
> + u8 blank = 0;
> + u8 narrow = 0;
> + u8 trailing = 0;
> + u64 bitmask = rlevel_bitmask_p->bm;
> + u8 extras = 0;
> + u8 toolong = 0;
> + u64 temp;
> +
> + if (bitmask == 0) {
> + blank += RLEVEL_BITMASK_BLANK_ERROR;
> + } else {
> + /* Look for fb, the first bit */
> + temp = bitmask;
> + while (!(temp & 1)) {
> + firstbit++;
> + temp >>= 1;
> + }
> +
> + /* Look for lb, the last bit */
> + lastbit = firstbit;
> + while ((temp >>= 1))
> + lastbit++;
> +
> + /*
> + * Start with the max range to try to find the largest mask
> + * within the bitmask data
> + */
> + width = MASKRANGE_BITS;
> + for (mask = MASKRANGE; mask > 0; mask >>= 1, --width) {
> + for (mstart = lastbit - width + 1; mstart >= firstbit;
> + --mstart) {
> + temp = mask << mstart;
> + if ((bitmask & temp) == temp)
> + goto done_now;
> + }
> + }
> +done_now:
> + /* look for any more contiguous 1's to the right of mstart */
> + if (width == MASKRANGE_BITS) { // only when maximum mask
> + while ((bitmask >> (mstart - 1)) & 1) {
> + // slide right over more 1's
> + --mstart;
> + // count the number of extra bits only for DDR4
> + if (ddr_type == DDR4_DRAM)
> + extras++;
> + }
> + }
> +
> + /* Penalize any extra 1's beyond the maximum desired mask */
> + if (extras > 0)
> + toolong =
> + RLEVEL_BITMASK_TOOLONG_ERROR * ((1 << extras) - 1);
> +
> + /* Detect if bitmask is too narrow. */
> + if (width < 4)
> + narrow = (4 - width) * RLEVEL_BITMASK_NARROW_ERROR;
> +
> + /*
> + * detect leading bubble bits, that is, any 0's between first
> + * and mstart
> + */
> + temp = bitmask >> (firstbit + 1);
> + i = mstart - firstbit - 1;
> + while (--i >= 0) {
> + if ((temp & 1) == 0)
> + bubble += RLEVEL_BITMASK_BUBBLE_BITS_ERROR;
> + temp >>= 1;
> + }
> +
> + temp = bitmask >> (mstart + width + extras);
> + i = lastbit - (mstart + width + extras - 1);
> + while (--i >= 0) {
> + if (temp & 1) {
> + /*
> + * Detect 1 bits after the trailing end of
> + * the mask, including last.
> + */
> + trailing += RLEVEL_BITMASK_TRAILING_BITS_ERROR;
> + } else {
> + /*
> + * Detect trailing bubble bits, that is,
> + * any 0's between end-of-mask and last
> + */
> + tbubble += RLEVEL_BITMASK_BUBBLE_BITS_ERROR;
> + }
> + temp >>= 1;
> + }
> + }
> +
> + errors = bubble + tbubble + blank + narrow + trailing + toolong;
> +
> + /* Pass out useful statistics */
> + rlevel_bitmask_p->mstart = mstart;
> + rlevel_bitmask_p->width = width;
> +
> + debug_bitmask_print("bm:%08lx mask:%02lx, width:%2u, mstart:%2d, fb:%2u, lb:%2u (bu:%2d, tb:%2d, bl:%2d, n:%2d, t:%2d, x:%2d) errors:%3d %s\n",
> + (unsigned long)bitmask, mask, width, mstart,
> + firstbit, lastbit, bubble, tbubble, blank,
> + narrow, trailing, toolong, errors,
> + (errors) ? "=> invalid" : "");
> +
> + return errors;
> +}
> +
> +int compute_ddr3_rlevel_delay(u8 mstart, u8 width,
> + union cvmx_lmcx_rlevel_ctl rlevel_ctl)
> +{
> + int delay;
> +
> + debug_bitmask_print(" offset_en:%d", rlevel_ctl.s.offset_en);
> +
> + if (rlevel_ctl.s.offset_en) {
> + delay = max((int)mstart,
> + (int)(mstart + width - 1 - rlevel_ctl.s.offset));
> + } else {
> + /* if (rlevel_ctl.s.offset) { *//* Experimental */
> + if (0) {
> + delay = max(mstart + rlevel_ctl.s.offset, mstart + 1);
> + /*
> + * Insure that the offset delay falls within the
> + * bitmask
> + */
> + delay = min(delay, mstart + width - 1);
> + } else {
> + /* Round down */
> + delay = (width - 1) / 2 + mstart;
> + }
> + }
> +
> + return delay;
> +}
> +
> +/* Default ODT config must disable ODT */
> +/* Must be const (read only) so that the structure is in flash */
> +const struct dimm_odt_config disable_odt_config[] = {
> + /* 1 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 },
> + /* 2 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 },
> + /* 3 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 },
> + /* 4 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 },
> +};
> +
> +/* Memory controller setup function */
> +static int init_octeon_dram_interface(struct ddr_priv *priv,
> + struct ddr_conf *ddr_conf,
> + u32 ddr_hertz, u32 cpu_hertz,
> + u32 ddr_ref_hertz, int if_num,
> + u32 if_mask)
> +{
> + u32 mem_size_mbytes = 0;
> + char *s;
> +
> + s = lookup_env(priv, "ddr_timing_hertz");
> + if (s)
> + ddr_hertz = simple_strtoul(s, NULL, 0);
> +
> + if (OCTEON_IS_OCTEON3()) {
> + int lmc_restart_retries = 0;
> +#define DEFAULT_RESTART_RETRIES 3
> + int lmc_restart_retries_limit = DEFAULT_RESTART_RETRIES;
> +
> + s = lookup_env(priv, "ddr_restart_retries_limit");
> + if (s)
> + lmc_restart_retries_limit = simple_strtoul(s, NULL, 0);
> +
> +restart_lmc_init:
> + mem_size_mbytes = init_octeon3_ddr3_interface(priv, ddr_conf,
> + ddr_hertz,
> + cpu_hertz,
> + ddr_ref_hertz,
> + if_num, if_mask);
> + if (mem_size_mbytes == 0) { // 0 means restart is possible
> + if (lmc_restart_retries < lmc_restart_retries_limit) {
> + lmc_restart_retries++;
> + printf("N0.LMC%d Configuration problem: attempting LMC reset and init restart %d\n",
> + if_num, lmc_restart_retries);
> + goto restart_lmc_init;
> + } else {
> + if (lmc_restart_retries_limit > 0) {
> + printf("INFO: N0.LMC%d Configuration: fatal problem remains after %d LMC init retries - Resetting node...\n",
> + if_num, lmc_restart_retries);
> + mdelay(500);
> + do_reset(NULL, 0, 0, NULL);
> + } else {
> + // return an error, no restart
> + mem_size_mbytes = -1;
> + }
> + }
> + }
> + }
> +
> + debug("N0.LMC%d Configuration Completed: %d MB\n",
> + if_num, mem_size_mbytes);
> +
> + return mem_size_mbytes;
> +}
> +
> +#define WLEVEL_BYTE_BITS 5
> +#define WLEVEL_BYTE_MSK ((1ULL << 5) - 1)
> +
> +void upd_wl_rank(union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank,
> + int byte, int delay)
> +{
> + union cvmx_lmcx_wlevel_rankx temp_wlevel_rank;
> +
> + if (byte >= 0 && byte <= 8) {
> + temp_wlevel_rank.u64 = lmc_wlevel_rank->u64;
> + temp_wlevel_rank.u64 &=
> + ~(WLEVEL_BYTE_MSK << (WLEVEL_BYTE_BITS * byte));
> + temp_wlevel_rank.u64 |=
> + ((delay & WLEVEL_BYTE_MSK) << (WLEVEL_BYTE_BITS * byte));
> + lmc_wlevel_rank->u64 = temp_wlevel_rank.u64;
> + }
> +}
> +
> +int get_wl_rank(union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, int byte)
> +{
> + int delay = 0;
> +
> + if (byte >= 0 && byte <= 8)
> + delay =
> + ((lmc_wlevel_rank->u64) >> (WLEVEL_BYTE_BITS *
> + byte)) & WLEVEL_BYTE_MSK;
> +
> + return delay;
> +}
> +
> +void upd_rl_rank(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank,
> + int byte, int delay)
> +{
> + union cvmx_lmcx_rlevel_rankx temp_rlevel_rank;
> +
> + if (byte >= 0 && byte <= 8) {
> + temp_rlevel_rank.u64 =
> + lmc_rlevel_rank->u64 & ~(RLEVEL_BYTE_MSK <<
> + (RLEVEL_BYTE_BITS * byte));
> + temp_rlevel_rank.u64 |=
> + ((delay & RLEVEL_BYTE_MSK) << (RLEVEL_BYTE_BITS * byte));
> + lmc_rlevel_rank->u64 = temp_rlevel_rank.u64;
> + }
> +}
> +
> +int get_rl_rank(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank, int byte)
> +{
> + int delay = 0;
> +
> + if (byte >= 0 && byte <= 8)
> + delay =
> + ((lmc_rlevel_rank->u64) >> (RLEVEL_BYTE_BITS *
> + byte)) & RLEVEL_BYTE_MSK;
> +
> + return delay;
> +}
> +
> +void rlevel_to_wlevel(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank,
> + union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, int byte)
> +{
> + int byte_delay = get_rl_rank(lmc_rlevel_rank, byte);
> +
> + debug("Estimating Wlevel delay byte %d: ", byte);
> + debug("Rlevel=%d => ", byte_delay);
> + byte_delay = divide_roundup(byte_delay, 2) & 0x1e;
> + debug("Wlevel=%d\n", byte_delay);
> + upd_wl_rank(lmc_wlevel_rank, byte, byte_delay);
> +}
> +
> +/* Delay trend: constant=0, decreasing=-1, increasing=1 */
> +static s64 calc_delay_trend(s64 v)
> +{
> + if (v == 0)
> + return 0;
> + if (v < 0)
> + return -1;
> +
> + return 1;
> +}
> +
> +/*
> + * Evaluate delay sequence across the whole range of byte delays while
> + * keeping track of the overall delay trend, increasing or decreasing.
> + * If the trend changes charge an error amount to the score.
> + */
> +
> +// NOTE: "max_adj_delay_inc" argument is, by default, 1 for DDR3 and 2 for DDR4
> +
> +int nonseq_del(struct rlevel_byte_data *rlevel_byte, int start, int end,
> + int max_adj_delay_inc)
> +{
> + s64 error = 0;
> + s64 delay_trend, prev_trend = 0;
> + int byte_idx;
> + s64 seq_err;
> + s64 adj_err;
> + s64 delay_inc;
> + s64 delay_diff;
> +
> + for (byte_idx = start; byte_idx < end; ++byte_idx) {
> + delay_diff = rlevel_byte[byte_idx + 1].delay -
> + rlevel_byte[byte_idx].delay;
> + delay_trend = calc_delay_trend(delay_diff);
> +
> + /*
> + * Increment error each time the trend changes to the
> + * opposite direction.
> + */
> + if (prev_trend != 0 && delay_trend != 0 &&
> + prev_trend != delay_trend) {
> + seq_err = RLEVEL_NONSEQUENTIAL_DELAY_ERROR;
> + } else {
> + seq_err = 0;
> + }
> +
> + // how big was the delay change, if any
> + delay_inc = abs(delay_diff);
> +
> + /*
> + * Even if the trend did not change to the opposite direction,
> + * check for the magnitude of the change, and scale the
> + * penalty by the amount that the size is larger than the
> + * provided limit.
> + */
> + if (max_adj_delay_inc != 0 && delay_inc > max_adj_delay_inc) {
> + adj_err = (delay_inc - max_adj_delay_inc) *
> + RLEVEL_ADJACENT_DELAY_ERROR;
> + } else {
> + adj_err = 0;
> + }
> +
> + rlevel_byte[byte_idx + 1].sqerrs = seq_err + adj_err;
> + error += seq_err + adj_err;
> +
> + debug_bitmask_print("Byte %d: %d, Byte %d: %d, delay_trend: %ld, prev_trend: %ld, [%ld/%ld]%s%s\n",
> + byte_idx + 0,
> + rlevel_byte[byte_idx + 0].delay,
> + byte_idx + 1,
> + rlevel_byte[byte_idx + 1].delay,
> + delay_trend,
> + prev_trend, seq_err, adj_err,
> + (seq_err) ?
> + " => Nonsequential byte delay" : "",
> + (adj_err) ?
> + " => Adjacent delay error" : "");
> +
> + if (delay_trend != 0)
> + prev_trend = delay_trend;
> + }
> +
> + return (int)error;
> +}
> +
> +int roundup_ddr3_wlevel_bitmask(int bitmask)
> +{
> + int shifted_bitmask;
> + int leader;
> + int delay;
> +
> + for (leader = 0; leader < 8; ++leader) {
> + shifted_bitmask = (bitmask >> leader);
> + if ((shifted_bitmask & 1) == 0)
> + break;
> + }
> +
> + for (leader = leader; leader < 16; ++leader) {
> + shifted_bitmask = (bitmask >> (leader % 8));
> + if (shifted_bitmask & 1)
> + break;
> + }
> +
> + delay = (leader & 1) ? leader + 1 : leader;
> + delay = delay % 8;
> +
> + return delay;
> +}
> +
> +/* Octeon 2 */
> +static void oct2_ddr3_seq(struct ddr_priv *priv, int rank_mask, int if_num,
> + int sequence)
> +{
> + char *s;
> +
> +#ifdef DEBUG_PERFORM_DDR3_SEQUENCE
> + static const char * const sequence_str[] = {
> + "power-up/init",
> + "read-leveling",
> + "self-refresh entry",
> + "self-refresh exit",
> + "precharge power-down entry",
> + "precharge power-down exit",
> + "write-leveling",
> + "illegal"
> + };
> +#endif
> +
> + union cvmx_lmcx_control lmc_control;
> + union cvmx_lmcx_config lmc_config;
> + int save_ddr2t;
> +
> + lmc_control.u64 = lmc_rd(priv, CVMX_LMCX_CONTROL(if_num));
> + save_ddr2t = lmc_control.s.ddr2t;
> +
> + if (save_ddr2t == 0 && octeon_is_cpuid(OCTEON_CN63XX_PASS1_X)) {
> + /* Some register parts (IDT and TI included) do not like
> + * the sequence that LMC generates for an MRS register
> + * write in 1T mode. In this case, the register part does
> + * not properly forward the MRS register write to the DRAM
> + * parts. See errata (LMC-14548) Issues with registered
> + * DIMMs.
> + */
> + debug("Forcing DDR 2T during init seq. Re: Pass 1 LMC-14548\n");
> + lmc_control.s.ddr2t = 1;
> + }
> +
> + s = lookup_env(priv, "ddr_init_2t");
> + if (s)
> + lmc_control.s.ddr2t = simple_strtoul(s, NULL, 0);
> +
> + lmc_wr(priv, CVMX_LMCX_CONTROL(if_num), lmc_control.u64);
> +
> + lmc_config.u64 = lmc_rd(priv, CVMX_LMCX_CONFIG(if_num));
> +
> + lmc_config.s.init_start = 1;
> + if (OCTEON_IS_OCTEON2())
> + lmc_config.cn63xx.sequence = sequence;
> + lmc_config.s.rankmask = rank_mask;
> +
> +#ifdef DEBUG_PERFORM_DDR3_SEQUENCE
> + debug("Performing LMC sequence: rank_mask=0x%02x, sequence=%d, %s\n",
> + rank_mask, sequence, sequence_str[sequence]);
> +#endif
> +
> + lmc_wr(priv, CVMX_LMCX_CONFIG(if_num), lmc_config.u64);
> + lmc_rd(priv, CVMX_LMCX_CONFIG(if_num));
> + udelay(600); /* Wait a while */
> +
> + lmc_control.s.ddr2t = save_ddr2t;
> + lmc_wr(priv, CVMX_LMCX_CONTROL(if_num), lmc_control.u64);
> + lmc_rd(priv, CVMX_LMCX_CONTROL(if_num));
> +}
> +
> +/* Check to see if any custom offset values are used */
> +static int is_dll_offset_provided(const int8_t *dll_offset_table)
> +{
> + int i;
> +
> + if (!dll_offset_table) /* Check for pointer to table. */
> + return 0;
> +
> + for (i = 0; i < 9; ++i) {
> + if (dll_offset_table[i] != 0)
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> +void change_dll_offset_enable(struct ddr_priv *priv, int if_num, int change)
> +{
> + union cvmx_lmcx_dll_ctl3 ddr_dll_ctl3;
> +
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num));
> + SET_DDR_DLL_CTL3(offset_ena, !!change);
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64);
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num));
> +}
> +
> +unsigned short load_dll_offset(struct ddr_priv *priv, int if_num,
> + int dll_offset_mode, int byte_offset, int byte)
> +{
> + union cvmx_lmcx_dll_ctl3 ddr_dll_ctl3;
> + int field_width = 6;
> + /*
> + * byte_sel:
> + * 0x1 = byte 0, ..., 0x9 = byte 8
> + * 0xA = all bytes
> + */
> + int byte_sel = (byte == 10) ? byte : byte + 1;
> +
> + if (octeon_is_cpuid(OCTEON_CN6XXX))
> + field_width = 5;
> +
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num));
> + SET_DDR_DLL_CTL3(load_offset, 0);
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64);
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num));
> +
> + SET_DDR_DLL_CTL3(mode_sel, dll_offset_mode);
> + SET_DDR_DLL_CTL3(offset,
> + (abs(byte_offset) & (~(-1 << field_width))) |
> + (_sign(byte_offset) << field_width));
> + SET_DDR_DLL_CTL3(byte_sel, byte_sel);
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64);
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num));
> +
> + SET_DDR_DLL_CTL3(load_offset, 1);
> + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64);
> + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num));
> +
> + return (unsigned short)GET_DDR_DLL_CTL3(offset);
> +}
> +
> +void process_custom_dll_offsets(struct ddr_priv *priv, int if_num,
> + const char *enable_str,
> + const int8_t *offsets, const char *byte_str,
> + int mode)
> +{
> + const char *s;
> + int enabled;
> + int provided;
> + int byte_offset;
> + unsigned short offset[9] = { 0 };
> + int byte;
> +
> + s = lookup_env(priv, enable_str);
> + if (s)
> + enabled = !!simple_strtol(s, NULL, 0);
> + else
> + enabled = -1;
> +
> + /*
> + * enabled == -1: no override, do only configured offsets if provided
> + * enabled == 0: override OFF, do NOT do it even if configured
> + * offsets provided
> + * enabled == 1: override ON, do it for overrides plus configured
> + * offsets
> + */
> +
> + if (enabled == 0)
> + return;
> +
> + provided = is_dll_offset_provided(offsets);
> +
> + if (enabled < 0 && !provided)
> + return;
> +
> + change_dll_offset_enable(priv, if_num, 0);
> +
> + for (byte = 0; byte < 9; ++byte) {
> + // always take the provided, if available
> + byte_offset = (provided) ? offsets[byte] : 0;
> +
> + // then, if enabled, use any overrides present
> + if (enabled > 0) {
> + s = lookup_env(priv, byte_str, if_num, byte);
> + if (s)
> + byte_offset = simple_strtol(s, NULL, 0);
> + }
> +
> + offset[byte] =
> + load_dll_offset(priv, if_num, mode, byte_offset, byte);
> + }
> +
> + change_dll_offset_enable(priv, if_num, 1);
> +
> + debug("N0.LMC%d: DLL %s Offset 8:0 : 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
> + if_num, (mode == 2) ? "Read " : "Write",
> + offset[8], offset[7], offset[6], offset[5], offset[4],
> + offset[3], offset[2], offset[1], offset[0]);
> +}
> +
> +void ddr_init_seq(struct ddr_priv *priv, int rank_mask, int if_num)
> +{
> + char *s;
> + int ddr_init_loops = 1;
> + int rankx;
> +
> + s = lookup_env(priv, "ddr%d_init_loops", if_num);
> + if (s)
> + ddr_init_loops = simple_strtoul(s, NULL, 0);
> +
> + while (ddr_init_loops--) {
> + for (rankx = 0; rankx < 8; rankx++) {
> + if (!(rank_mask & (1 << rankx)))
> + continue;
> +
> + if (OCTEON_IS_OCTEON3()) {
> + /* power-up/init */
> + oct3_ddr3_seq(priv, 1 << rankx, if_num, 0);
> + } else {
> + /* power-up/init */
> + oct2_ddr3_seq(priv, 1 << rankx, if_num, 0);
> + }
> +
> + udelay(1000); /* Wait a while. */
> +
> + s = lookup_env(priv, "ddr_sequence1");
> + if (s) {
> + int sequence1;
> +
> + sequence1 = simple_strtoul(s, NULL, 0);
> +
> + if (OCTEON_IS_OCTEON3()) {
> + oct3_ddr3_seq(priv, 1 << rankx,
> + if_num, sequence1);
> + } else {
> + oct2_ddr3_seq(priv, 1 << rankx,
> + if_num, sequence1);
> + }
> + }
> +
> + s = lookup_env(priv, "ddr_sequence2");
> + if (s) {
> + int sequence2;
> +
> + sequence2 = simple_strtoul(s, NULL, 0);
> +
> + if (OCTEON_IS_OCTEON3())
> + oct3_ddr3_seq(priv, 1 << rankx,
> + if_num, sequence2);
> + else
> + oct2_ddr3_seq(priv, 1 << rankx,
> + if_num, sequence2);
> + }
> + }
> + }
> +}
> +
> +static int octeon_ddr_initialize(struct ddr_priv *priv, u32 cpu_hertz,
> + u32 ddr_hertz, u32 ddr_ref_hertz,
> + u32 if_mask,
> + struct ddr_conf *ddr_conf,
> + u32 *measured_ddr_hertz)
> +{
> + u32 ddr_conf_valid_mask = 0;
> + int memsize_mbytes = 0;
> + char *eptr;
> + int if_idx;
> + u32 ddr_max_speed = 667000000;
> + u32 calc_ddr_hertz = -1;
> + int val;
> + int ret;
> +
> + if (env_get("ddr_verbose") || env_get("ddr_prompt"))
> + priv->flags |= FLAG_DDR_VERBOSE;
> +
> +#ifdef DDR_VERBOSE
> + priv->flags |= FLAG_DDR_VERBOSE;
> +#endif
> +
> + if (env_get("ddr_trace_init")) {
> + printf("Parameter ddr_trace_init found in environment.\n");
> + priv->flags |= FLAG_DDR_TRACE_INIT;
> + priv->flags |= FLAG_DDR_VERBOSE;
> + }
> +
> + priv->flags |= FLAG_DDR_DEBUG;
> +
> + val = env_get_ulong("ddr_debug", 10, (u32)-1);
> + switch (val) {
> + case 0:
> + priv->flags &= ~FLAG_DDR_DEBUG;
> + printf("Parameter ddr_debug clear in environment\n");
> + break;
> + case (u32)-1:
> + break;
> + default:
> + printf("Parameter ddr_debug set in environment\n");
> + priv->flags |= FLAG_DDR_DEBUG;
> + priv->flags |= FLAG_DDR_VERBOSE;
> + break;
> + }
> + if (env_get("ddr_prompt"))
> + priv->flags |= FLAG_DDR_PROMPT;
> +
> + /* Force ddr_verbose for failsafe debugger */
> + if (priv->flags & FLAG_FAILSAFE_MODE)
> + priv->flags |= FLAG_DDR_VERBOSE;
> +
> +#ifdef DDR_DEBUG
> + priv->flags |= FLAG_DDR_DEBUG;
> + /* Keep verbose on while we are still debugging. */
> + priv->flags |= FLAG_DDR_VERBOSE;
> +#endif
> +
> + if ((octeon_is_cpuid(OCTEON_CN61XX) ||
> + octeon_is_cpuid(OCTEON_CNF71XX)) && ddr_max_speed > 533333333) {
> + ddr_max_speed = 533333333;
> + } else if (octeon_is_cpuid(OCTEON_CN7XXX)) {
> + /* Override speed restrictions to support internal testing. */
> + ddr_max_speed = 1210000000;
> + }
> +
> + if (ddr_hertz > ddr_max_speed) {
> + printf("DDR clock speed %u exceeds maximum supported DDR speed, reducing to %uHz\n",
> + ddr_hertz, ddr_max_speed);
> + ddr_hertz = ddr_max_speed;
> + }
> +
> + if (OCTEON_IS_OCTEON3()) { // restrict check
> + if (ddr_hertz > cpu_hertz) {
> + printf("\nFATAL ERROR: DDR speed %u exceeds CPU speed %u, exiting...\n\n",
> + ddr_hertz, cpu_hertz);
> + return -1;
> + }
> + }
> +
> + /* Enable L2 ECC */
> + eptr = env_get("disable_l2_ecc");
> + if (eptr) {
> + printf("Disabling L2 ECC based on disable_l2_ecc environment variable\n");
> + union cvmx_l2c_ctl l2c_val;
> +
> + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL);
> + l2c_val.s.disecc = 1;
> + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64);
> + } else {
> + union cvmx_l2c_ctl l2c_val;
> +
> + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL);
> + l2c_val.s.disecc = 0;
> + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64);
> + }
> +
> + /*
> + * Init the L2C, must be done before DRAM access so that we
> + * know L2 is empty
> + */
> + eptr = env_get("disable_l2_index_aliasing");
> + if (eptr) {
> + union cvmx_l2c_ctl l2c_val;
> +
> + puts("L2 index aliasing disabled.\n");
> +
> + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL);
> + l2c_val.s.disidxalias = 1;
> + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64);
> + } else {
> + union cvmx_l2c_ctl l2c_val;
> +
> + /* Enable L2C index aliasing */
> +
> + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL);
> + l2c_val.s.disidxalias = 0;
> + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64);
> + }
> +
> + if (OCTEON_IS_OCTEON3()) {
> + /*
> + * rdf_cnt: Defines the sample point of the LMC response data in
> + * the DDR-clock/core-clock crossing. For optimal
> + * performance set to 10 * (DDR-clock period/core-clock
> + * period) - 1. To disable set to 0. All other values
> + * are reserved.
> + */
> +
> + union cvmx_l2c_ctl l2c_ctl;
> + u64 rdf_cnt;
> + char *s;
> +
> + l2c_ctl.u64 = l2c_rd(priv, CVMX_L2C_CTL);
> +
> + /*
> + * It is more convenient to compute the ratio using clock
> + * frequencies rather than clock periods.
> + */
> + rdf_cnt = (((u64)10 * cpu_hertz) / ddr_hertz) - 1;
> + rdf_cnt = rdf_cnt < 256 ? rdf_cnt : 255;
> + l2c_ctl.cn78xx.rdf_cnt = rdf_cnt;
> +
> + s = lookup_env(priv, "early_fill_count");
> + if (s)
> + l2c_ctl.cn78xx.rdf_cnt = simple_strtoul(s, NULL, 0);
> +
> + debug("%-45s : %d, cpu_hertz:%d, ddr_hertz:%d\n",
> + "EARLY FILL COUNT ", l2c_ctl.cn78xx.rdf_cnt, cpu_hertz,
> + ddr_hertz);
> + l2c_wr(priv, CVMX_L2C_CTL, l2c_ctl.u64);
> + }
> +
> + /* Check for lower DIMM socket populated */
> + for (if_idx = 0; if_idx < 4; ++if_idx) {
> + if ((if_mask & (1 << if_idx)) &&
> + validate_dimm(priv,
> + &ddr_conf[(int)if_idx].dimm_config_table[0],
> + 0))
> + ddr_conf_valid_mask |= (1 << if_idx);
> + }
> +
> + if (octeon_is_cpuid(OCTEON_CN68XX) || octeon_is_cpuid(OCTEON_CN78XX)) {
> + int four_lmc_mode = 1;
> + char *s;
> +
> + if (priv->flags & FLAG_FAILSAFE_MODE)
> + four_lmc_mode = 0;
> +
> + /* Pass 1.0 disable four LMC mode.
> + * See errata (LMC-15811)
> + */
> + if (octeon_is_cpuid(OCTEON_CN68XX_PASS1_0))
> + four_lmc_mode = 0;
> +
> + s = env_get("ddr_four_lmc");
> + if (s) {
> + four_lmc_mode = simple_strtoul(s, NULL, 0);
> + printf("Parameter found in environment. ddr_four_lmc = %d\n",
> + four_lmc_mode);
> + }
> +
> + if (!four_lmc_mode) {
> + puts("Forcing two-LMC Mode.\n");
> + /* Invalidate LMC[2:3] */
> + ddr_conf_valid_mask &= ~(3 << 2);
> + }
> + } else if (octeon_is_cpuid(OCTEON_CN73XX)) {
> + int one_lmc_mode = 0;
> + char *s;
> +
> + s = env_get("ddr_one_lmc");
> + if (s) {
> + one_lmc_mode = simple_strtoul(s, NULL, 0);
> + printf("Parameter found in environment. ddr_one_lmc = %d\n",
> + one_lmc_mode);
> + }
> +
> + if (one_lmc_mode) {
> + puts("Forcing one-LMC Mode.\n");
> + /* Invalidate LMC[1:3] */
> + ddr_conf_valid_mask &= ~(1 << 1);
> + }
> + }
> +
> + if (!ddr_conf_valid_mask) {
> + printf
> + ("ERROR: No valid DIMMs detected on any DDR interface.\n");
> + hang();
> + return -1; // testr-only: no ret negativ!!!
> + }
> +
> + /*
> + * We measure the DDR frequency by counting DDR clocks. We can
> + * confirm or adjust the expected frequency as necessary. We use
> + * the measured frequency to make accurate timing calculations
> + * used to configure the controller.
> + */
> + for (if_idx = 0; if_idx < 4; ++if_idx) {
> + u32 tmp_hertz;
> +
> + if (!(ddr_conf_valid_mask & (1 << if_idx)))
> + continue;
> +
> +try_again:
> + /*
> + * only check for alternate refclk wanted on chips that
> + * support it
> + */
> + if ((octeon_is_cpuid(OCTEON_CN73XX)) ||
> + (octeon_is_cpuid(OCTEON_CNF75XX)) ||
> + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X))) {
> + // only need do this if we are LMC0
> + if (if_idx == 0) {
> + union cvmx_lmcx_ddr_pll_ctl ddr_pll_ctl;
> +
> + ddr_pll_ctl.u64 =
> + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(0));
> +
> + /*
> + * If we are asking for 100 MHz refclk, we can
> + * only get it via alternate, so switch to it
> + */
> + if (ddr_ref_hertz == 100000000) {
> + ddr_pll_ctl.cn78xx.dclk_alt_refclk_sel =
> + 1;
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(0),
> + ddr_pll_ctl.u64);
> + udelay(1000); // wait 1 msec
> + } else {
> + /*
> + * If we are NOT asking for 100MHz,
> + * then reset to (assumed) 50MHz and go
> + * on
> + */
> + ddr_pll_ctl.cn78xx.dclk_alt_refclk_sel =
> + 0;
> + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(0),
> + ddr_pll_ctl.u64);
> + udelay(1000); // wait 1 msec
> + }
> + }
> + } else {
> + if (ddr_ref_hertz == 100000000) {
> + debug("N0: DRAM init: requested 100 MHz refclk NOT SUPPORTED\n");
> + ddr_ref_hertz = CONFIG_REF_HERTZ;
> + }
> + }
> +
> + tmp_hertz = measure_octeon_ddr_clock(priv, &ddr_conf[if_idx],
> + cpu_hertz, ddr_hertz,
> + ddr_ref_hertz, if_idx,
> + ddr_conf_valid_mask);
> +
> + /*
> + * only check for alternate refclk acquired on chips that
> + * support it
> + */
> + if ((octeon_is_cpuid(OCTEON_CN73XX)) ||
> + (octeon_is_cpuid(OCTEON_CNF75XX)) ||
> + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X))) {
> + /*
> + * if we are LMC0 and we are asked for 100 MHz refclk,
> + * we must be sure it is available
> + * If not, we print an error message, set to 50MHz,
> + * and go on...
> + */
> + if (if_idx == 0 && ddr_ref_hertz == 100000000) {
> + /*
> + * Validate that the clock returned is close
> + * enough to the clock desired
> + */
> + // FIXME: is 5% close enough?
> + int hertz_diff =
> + abs((int)tmp_hertz - (int)ddr_hertz);
> + if (hertz_diff > ((int)ddr_hertz * 5 / 100)) {
> + // nope, diff is greater than than 5%
> + debug("N0: DRAM init: requested 100 MHz refclk NOT FOUND\n");
> + ddr_ref_hertz = CONFIG_REF_HERTZ;
> + // clear the flag before trying again!!
> + set_ddr_clock_initialized(priv, 0, 0);
> + goto try_again;
> + } else {
> + debug("N0: DRAM Init: requested 100 MHz refclk FOUND and SELECTED\n");
> + }
> + }
> + }
> +
> + if (tmp_hertz > 0)
> + calc_ddr_hertz = tmp_hertz;
> + debug("LMC%d: measured speed: %u hz\n", if_idx, tmp_hertz);
> + }
> +
> + if (measured_ddr_hertz)
> + *measured_ddr_hertz = calc_ddr_hertz;
> +
> + memsize_mbytes = 0;
> + for (if_idx = 0; if_idx < 4; ++if_idx) {
> + if (!(ddr_conf_valid_mask & (1 << if_idx)))
> + continue;
> +
> + ret = init_octeon_dram_interface(priv, &ddr_conf[if_idx],
> + calc_ddr_hertz,
> + cpu_hertz, ddr_ref_hertz,
> + if_idx, ddr_conf_valid_mask);
> + if (ret > 0)
> + memsize_mbytes += ret;
> + }
> +
> + if (memsize_mbytes == 0)
> + /* All interfaces failed to initialize, so return error */
> + return -1;
> +
> + /*
> + * switch over to DBI mode only for chips that support it, and
> + * enabled by envvar
> + */
> + if ((octeon_is_cpuid(OCTEON_CN73XX)) ||
> + (octeon_is_cpuid(OCTEON_CNF75XX)) ||
> + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X))) {
> + eptr = env_get("ddr_dbi_switchover");
> + if (eptr) {
> + printf("DBI Switchover starting...\n");
> + cvmx_dbi_switchover(priv);
> + printf("DBI Switchover finished.\n");
> + }
> + }
> +
> + /* call HW-assist tuning here on chips that support it */
> + if ((octeon_is_cpuid(OCTEON_CN73XX)) ||
> + (octeon_is_cpuid(OCTEON_CNF75XX)) ||
> + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X)))
> + cvmx_maybe_tune_node(priv, calc_ddr_hertz);
> +
> + eptr = env_get("limit_dram_mbytes");
> + if (eptr) {
> + unsigned int mbytes = simple_strtoul(eptr, NULL, 10);
> +
> + if (mbytes > 0) {
> + memsize_mbytes = mbytes;
> + printf("Limiting DRAM size to %d MBytes based on limit_dram_mbytes env. variable\n",
> + mbytes);
> + }
> + }
> +
> + debug("LMC Initialization complete. Total DRAM %d MB\n",
> + memsize_mbytes);
> +
> + return memsize_mbytes;
> +}
> +
> +static int octeon_ddr_probe(struct udevice *dev)
> +{
> + struct ddr_priv *priv = dev_get_priv(dev);
> + struct ofnode_phandle_args l2c_node;
> + struct ddr_conf *ddr_conf_ptr;
> + u32 ddr_conf_valid_mask = 0;
> + u32 measured_ddr_hertz = 0;
> + int conf_table_count;
> + int def_ddr_freq;
> + u32 mem_mbytes = 0;
> + u32 ddr_hertz;
> + u32 ddr_ref_hertz;
> + int alt_refclk;
> + const char *eptr;
> + fdt_addr_t addr;
> + u64 *ptr;
> + u64 val;
> + int ret;
> + int i;
> +
> + /* Don't try to re-init the DDR controller after relocation */
> + if (gd->flags & GD_FLG_RELOC)
> + return 0;
> +
> + /*
> + * Dummy read all local variables into cache, so that they are
> + * locked in cache when the DDR code runs with flushes etc enabled
> + */
> + ptr = (u64 *)_end;
> + for (i = 0; i < (0x100000 / sizeof(u64)); i++)
> + val = readq(ptr++);
> +
> + /*
> + * The base addresses of LMC and L2C are read from the DT. This
> + * makes it possible to use the DDR init code without the need
> + * of the "node" variable, describing on which node to access. The
> + * node number is already included implicitly in the base addresses
> + * read from the DT this way.
> + */
> +
> + /* Get LMC base address */
> + priv->lmc_base = dev_remap_addr(dev);
> + debug("%s: lmc_base=%p\n", __func__, priv->lmc_base);
> +
> + /* Get L2C base address */
> + ret = dev_read_phandle_with_args(dev, "l2c-handle", NULL, 0, 0,
> + &l2c_node);
> + if (ret) {
> + printf("Can't access L2C node!\n");
> + return -ENODEV;
> + }
> +
> + addr = ofnode_get_addr(l2c_node.node);
> + if (addr == FDT_ADDR_T_NONE) {
> + printf("Can't access L2C node!\n");
> + return -ENODEV;
> + }
> +
> + priv->l2c_base = map_physmem(addr, 0, MAP_NOCACHE);
> + debug("%s: l2c_base=%p\n", __func__, priv->l2c_base);
why not dev_remap_addr()?
> +
> + ddr_conf_ptr = octeon_ddr_conf_table_get(&conf_table_count,
> + &def_ddr_freq);
> + if (!ddr_conf_ptr) {
> + printf("ERROR: unable to determine DDR configuration\n");
> + return -ENODEV;
> + }
> +
> + for (i = 0; i < conf_table_count; i++) {
> + if (ddr_conf_ptr[i].dimm_config_table[0].spd_addrs[0] ||
> + ddr_conf_ptr[i].dimm_config_table[0].spd_ptrs[0])
> + ddr_conf_valid_mask |= 1 << i;
> + }
> +
> + /*
> + * Check for special case of mismarked 3005 samples,
> + * and adjust cpuid
> + */
> + alt_refclk = 0;
> + ddr_hertz = def_ddr_freq * 1000000;
> +
> + eptr = env_get("ddr_clock_hertz");
> + if (eptr) {
> + ddr_hertz = simple_strtoul(eptr, NULL, 0);
> + gd->mem_clk = divide_nint(ddr_hertz, 1000000);
> + printf("Parameter found in environment. ddr_clock_hertz = %d\n",
> + ddr_hertz);
> + }
who will set this in the environment and when? Shouldn't this be
configurable via device-tree?
> +
> + ddr_ref_hertz = octeon3_refclock(alt_refclk,
> + ddr_hertz,
> + &ddr_conf_ptr[0].dimm_config_table[0]);
> +
> + debug("Initializing DDR, clock = %uhz, reference = %uhz\n",
> + ddr_hertz, ddr_ref_hertz);
> +
> + mem_mbytes = octeon_ddr_initialize(priv, gd->cpu_clk,
> + ddr_hertz, ddr_ref_hertz,
> + ddr_conf_valid_mask,
> + ddr_conf_ptr, &measured_ddr_hertz);
> + debug("Mem size in MBYTES: %u\n", mem_mbytes);
> +
> + gd->mem_clk = divide_nint(measured_ddr_hertz, 1000000);
> +
> + debug("Measured DDR clock %d Hz\n", measured_ddr_hertz);
> +
> + if (measured_ddr_hertz != 0) {
> + if (!gd->mem_clk) {
> + /*
> + * If ddr_clock not set, use measured clock
> + * and don't warn
> + */
> + gd->mem_clk = divide_nint(measured_ddr_hertz, 1000000);
> + } else if ((measured_ddr_hertz > ddr_hertz + 3000000) ||
> + (measured_ddr_hertz < ddr_hertz - 3000000)) {
> + printf("\nWARNING:\n");
> + printf("WARNING: Measured DDR clock mismatch! expected: %lld MHz, measured: %lldMHz, cpu clock: %lu MHz\n",
> + divide_nint(ddr_hertz, 1000000),
> + divide_nint(measured_ddr_hertz, 1000000),
> + gd->cpu_clk);
> + printf("WARNING:\n\n");
> + gd->mem_clk = divide_nint(measured_ddr_hertz, 1000000);
> + }
> + }
> +
> + if (!mem_mbytes)
> + return -ENODEV;
> +
> + priv->info.base = CONFIG_SYS_SDRAM_BASE;
> + priv->info.size = MB(mem_mbytes);
> +
> + /*
> + * For 6XXX generate a proper error when reading/writing
> + * non-existent memory locations.
> + */
> + cvmx_l2c_set_big_size(priv, mem_mbytes, 0);
> +
> + debug("Ram size %uMiB\n", mem_mbytes);
> +
> + return 0;
> +}
> +
> +static int octeon_get_info(struct udevice *dev, struct ram_info *info)
> +{
> + struct ddr_priv *priv = dev_get_priv(dev);
> +
> + *info = priv->info;
> +
> + return 0;
> +}
> +
> +static struct ram_ops octeon_ops = {
> + .get_info = octeon_get_info,
> +};
> +
> +static const struct udevice_id octeon_ids[] = {
> + {.compatible = "cavium,octeon-7xxx-ddr4" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(octeon_ddr) = {
> + .name = "octeon_ddr",
> + .id = UCLASS_RAM,
> + .of_match = octeon_ids,
> + .ops = &octeon_ops,
> + .probe = octeon_ddr_probe,
> + .platdata_auto_alloc_size = sizeof(struct ddr_priv),
> +};
--
- Daniel
More information about the U-Boot
mailing list