[PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c

Leo Liang ycliang at andestech.com
Thu Aug 6 05:36:48 CEST 2020


On Sun, Aug 02, 2020 at 11:09:06PM -0700, Bin Meng wrote:
> From: Bin Meng <bin.meng at windriver.com>
> 
> It's better to keep all SPL related functions in the same spl.c.
> 
> Signed-off-by: Bin Meng <bin.meng at windriver.com>
> ---
> 
>  board/sifive/fu540/fu540.c | 33 ---------------------------------
>  board/sifive/fu540/spl.c   | 33 ++++++++++++++++++++++++++++++++-
>  2 files changed, 32 insertions(+), 34 deletions(-)
> 
> diff --git a/board/sifive/fu540/fu540.c b/board/sifive/fu540/fu540.c
> index 57753ba..54e5a4c 100644
> --- a/board/sifive/fu540/fu540.c
> +++ b/board/sifive/fu540/fu540.c
> @@ -13,7 +13,6 @@
>  #include <linux/bitops.h>
>  #include <linux/bug.h>
>  #include <linux/delay.h>
> -#include <linux/io.h>
>  #include <misc.h>
>  #include <spl.h>
>  #include <asm/arch/cache.h>
> @@ -127,35 +126,3 @@ int board_init(void)
>  
>  	return 0;
>  }
> -
> -#ifdef CONFIG_SPL
> -#define MODE_SELECT_REG		0x1000
> -#define MODE_SELECT_QSPI	0x6
> -#define MODE_SELECT_SD		0xb
> -#define MODE_SELECT_MASK	GENMASK(3, 0)
> -
> -u32 spl_boot_device(void)
> -{
> -	u32 mode_select = readl((void *)MODE_SELECT_REG);
> -	u32 boot_device = mode_select & MODE_SELECT_MASK;
> -
> -	switch (boot_device) {
> -	case MODE_SELECT_QSPI:
> -		return BOOT_DEVICE_SPI;
> -	case MODE_SELECT_SD:
> -		return BOOT_DEVICE_MMC1;
> -	default:
> -		debug("Unsupported boot device 0x%x but trying MMC1\n",
> -		      boot_device);
> -		return BOOT_DEVICE_MMC1;
> -	}
> -}
> -#endif
> -
> -#ifdef CONFIG_SPL_LOAD_FIT
> -int board_fit_config_name_match(const char *name)
> -{
> -	/* boot using first FIT config */
> -	return 0;
> -}
> -#endif
> diff --git a/board/sifive/fu540/spl.c b/board/sifive/fu540/spl.c
> index 135e118..fe27316 100644
> --- a/board/sifive/fu540/spl.c
> +++ b/board/sifive/fu540/spl.c
> @@ -11,11 +11,17 @@
>  #include <misc.h>
>  #include <log.h>
>  #include <linux/delay.h>
> +#include <linux/io.h>
>  #include <asm/gpio.h>
>  #include <asm/arch/gpio.h>
>  #include <asm/arch/spl.h>
>  
> -#define GEM_PHY_RESET	SIFIVE_GENERIC_GPIO_NR(0, 12)
> +#define GEM_PHY_RESET		SIFIVE_GENERIC_GPIO_NR(0, 12)
> +
> +#define MODE_SELECT_REG		0x1000
> +#define MODE_SELECT_QSPI	0x6
> +#define MODE_SELECT_SD		0xb
> +#define MODE_SELECT_MASK	GENMASK(3, 0)
>  
>  int spl_board_init_f(void)
>  {
> @@ -55,3 +61,28 @@ int spl_board_init_f(void)
>  
>  	return 0;
>  }
> +
> +u32 spl_boot_device(void)
> +{
> +	u32 mode_select = readl((void *)MODE_SELECT_REG);
> +	u32 boot_device = mode_select & MODE_SELECT_MASK;
> +
> +	switch (boot_device) {
> +	case MODE_SELECT_QSPI:
> +		return BOOT_DEVICE_SPI;
> +	case MODE_SELECT_SD:
> +		return BOOT_DEVICE_MMC1;
> +	default:
> +		debug("Unsupported boot device 0x%x but trying MMC1\n",
> +		      boot_device);
> +		return BOOT_DEVICE_MMC1;
> +	}
> +}
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name)
> +{
> +	/* boot using first FIT config */
> +	return 0;
> +}
> +#endif
> -- 
> 2.7.4
>

Reviewed-by: Leo Liang <ycliang at andestech.com>


More information about the U-Boot mailing list