[PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Bin Meng
bmeng.cn at gmail.com
Thu Aug 20 11:07:13 CEST 2020
Hi Stefan,
On Thu, Aug 20, 2020 at 1:35 PM Stefan Roese <sr at denx.de> wrote:
>
> This patch adds the glue layer for the MIPS Octeon SoCs. Its ported
nits: It's
> mainly from the Linux code.
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Bin Meng <bmeng.cn at gmail.com>
> Cc: Marek Vasut <marex at denx.de>
> ---
>
> (no changes since v1)
>
> drivers/usb/host/Kconfig | 9 +
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/dwc3-octeon-glue.c | 396 ++++++++++++++++++++++++++++
> 3 files changed, 406 insertions(+)
> create mode 100644 drivers/usb/host/dwc3-octeon-glue.c
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 1c374a7bd8..d71c12d888 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -46,6 +46,15 @@ config USB_XHCI_MVEBU
> SoCs, which includes Armada8K, Armada3700 and other Armada
> family SoCs.
>
> +config USB_XHCI_OCTEON
> + bool "Support for Marvell Octeon family on-chip xHCI USB controller"
> + depends on ARCH_OCTEON
> + default y
> + help
> + Enables support for the on-chip xHCI controller on Marvell Octeon
> + family SoCs. This is a driver for the dwc3 to provide the glue logic
> + to configure the controller.
> +
> config USB_XHCI_PCI
> bool "Support for PCI-based xHCI USB controller"
> depends on DM_USB
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 29d4f87e38..a12e8f2702 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
> obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
> obj-$(CONFIG_USB_XHCI_RCAR) += xhci-rcar.o
> obj-$(CONFIG_USB_XHCI_STI) += dwc3-sti-glue.o
> +obj-$(CONFIG_USB_XHCI_OCTEON) += dwc3-octeon-glue.o
>
> # designware
> obj-$(CONFIG_USB_DWC2) += dwc2.o
> diff --git a/drivers/usb/host/dwc3-octeon-glue.c b/drivers/usb/host/dwc3-octeon-glue.c
> new file mode 100644
> index 0000000000..7b1ca7ee33
> --- /dev/null
> +++ b/drivers/usb/host/dwc3-octeon-glue.c
> @@ -0,0 +1,396 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Octeon family DWC3 specific glue layer
> + *
> + * Copyright (C) 2020 Stefan Roese <sr at denx.de>
> + *
> + * The lowlevel init code is based on the Linux driver octeon-usb.c by
nits: low-level
> + * David Daney <david.daney at cavium.com>, which is:
> + * Copyright (C) 2010-2017 Cavium Networks
> + */
> +
> +#include <dm.h>
> +#include <errno.h>
> +#include <usb.h>
> +#include <asm/io.h>
> +#include <dm/lists.h>
> +#include <dm/of_access.h>
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/usb/dwc3.h>
> +#include <linux/usb/otg.h>
> +#include <mach/octeon-model.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define CVMX_GPIO_BIT_CFGX(i) (0x0001070000000900ull + ((i) * 8))
> +#define CVMX_GPIO_XBIT_CFGX(i) (0x0001070000000900ull + \
> + ((i) & 31) * 8 - 8 * 16)
> +
> +#define GPIO_BIT_CFG_TX_OE BIT_ULL(0)
> +#define GPIO_BIT_CFG_OUTPUT_SEL GENMASK_ULL(20, 16)
> +
> +#define UCTL_CTL_UCTL_RST BIT_ULL(0)
> +#define UCTL_CTL_UAHC_RST BIT_ULL(1)
> +#define UCTL_CTL_UPHY_RST BIT_ULL(2)
> +#define UCTL_CTL_DRD_MODE BIT_ULL(3)
> +#define UCTL_CTL_SCLK_EN BIT_ULL(4)
> +#define UCTL_CTL_HS_POWER_EN BIT_ULL(12)
> +#define UCTL_CTL_SS_POWER_EN BIT_ULL(14)
> +#define UCTL_CTL_H_CLKDIV_SEL GENMASK_ULL(26, 24)
> +#define UCTL_CTL_H_CLKDIV_RST BIT_ULL(28)
> +#define UCTL_CTL_H_CLK_EN BIT_ULL(30)
> +#define UCTL_CTL_REF_CLK_FSEL GENMASK_ULL(37, 32)
> +#define UCTL_CTL_REF_CLK_DIV2 BIT_ULL(38)
> +#define UCTL_CTL_REF_SSP_EN BIT_ULL(39)
> +#define UCTL_CTL_MPLL_MULTIPLIER GENMASK_ULL(46, 40)
> +#define UCTL_CTL_SSC_EN BIT_ULL(59)
> +#define UCTL_CTL_REF_CLK_SEL GENMASK_ULL(61, 60)
> +
> +#define UCTL_HOST_CFG 0xe0
> +#define UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN BIT_ULL(24)
> +#define UCTL_HOST_CFG_PPC_EN BIT_ULL(25)
> +
> +#define UCTL_SHIM_CFG 0xe8
> +#define UCTL_SHIM_CFG_CSR_ENDIAN_MODE GENMASK_ULL(1, 0)
> +#define UCTL_SHIM_CFG_DMA_ENDIAN_MODE GENMASK_ULL(9, 8)
> +
> +#define OCTEON_H_CLKDIV_SEL 8
> +#define OCTEON_MIN_H_CLK_RATE 150000000
> +#define OCTEON_MAX_H_CLK_RATE 300000000
> +
> +static u8 clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
> +
> +static int dwc3_octeon_config_power(struct udevice *dev, void __iomem *base)
> +{
> + u64 uctl_host_cfg;
> + u64 gpio_bit;
> + u32 gpio_pwr[3];
> + int gpio, len, power_active_low;
> + const struct device_node *node = dev_np(dev);
> + int index = ((u64)base >> 24) & 1;
> + void __iomem *gpio_bit_cfg;
> +
> + if (of_find_property(node, "power", &len)) {
> + if (len == 12) {
> + dev_read_u32_array(dev, "power", gpio_pwr, 3);
> + power_active_low = gpio_pwr[2] & 0x01;
> + gpio = gpio_pwr[1];
> + } else if (len == 8) {
> + dev_read_u32_array(dev, "power", gpio_pwr, 2);
> + power_active_low = 0;
> + gpio = gpio_pwr[1];
> + } else {
> + printf("dwc3 controller clock init failure\n");
> + return -EINVAL;
> + }
> +
> + gpio_bit_cfg = ioremap(CVMX_GPIO_BIT_CFGX(gpio), 0);
> +
> + if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
> + OCTEON_IS_MODEL(OCTEON_CNF75XX)) && gpio <= 31) {
> + gpio_bit = ioread64(gpio_bit_cfg);
> + gpio_bit |= GPIO_BIT_CFG_TX_OE;
> + gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
> + gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
> + index == 0 ? 0x14 : 0x15);
> + iowrite64(gpio_bit, gpio_bit_cfg);
> + } else if (gpio <= 15) {
> + gpio_bit = ioread64(gpio_bit_cfg);
> + gpio_bit |= GPIO_BIT_CFG_TX_OE;
> + gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
> + gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
> + index == 0 ? 0x14 : 0x19);
> + iowrite64(gpio_bit, gpio_bit_cfg);
> + } else {
> + gpio_bit_cfg = ioremap(CVMX_GPIO_XBIT_CFGX(gpio), 0);
> +
> + gpio_bit = ioread64(gpio_bit_cfg);
> + gpio_bit |= GPIO_BIT_CFG_TX_OE;
> + gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
> + gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
> + index == 0 ? 0x14 : 0x19);
> + iowrite64(gpio_bit, gpio_bit_cfg);
> + }
> +
> + /* Enable XHCI power control and set if active high or low. */
> + uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
> + uctl_host_cfg |= UCTL_HOST_CFG_PPC_EN;
> + if (power_active_low)
> + uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
> + else
> + uctl_host_cfg |= UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
> + iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
> +
> + /* Wait for power to stabilize */
> + mdelay(10);
> + } else {
> + /* Disable XHCI power control and set if active high. */
> + uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
> + uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_EN;
> + uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
> + iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
> + dev_warn(dev, "dwc3 controller clock init failure.\n");
> + }
> +
> + return 0;
> +}
> +
> +static int dwc3_octeon_clocks_start(struct udevice *dev, void __iomem *base)
> +{
> + u64 uctl_ctl;
> + int ref_clk_sel = 2;
> + u64 div;
> + u32 clock_rate;
> + int mpll_mul;
> + int i;
> + u64 h_clk_rate;
> + void __iomem *uctl_ctl_reg = base;
> + const char *ss_clock_type;
> + const char *hs_clock_type;
> +
> + i = dev_read_u32(dev, "refclk-frequency", &clock_rate);
> + if (i) {
> + printf("No UCTL \"refclk-frequency\"\n");
> + return -EINVAL;
> + }
> +
> + ss_clock_type = dev_read_string(dev, "refclk-type-ss");
> + if (!ss_clock_type) {
> + printf("No UCTL \"refclk-type-ss\"\n");
> + return -EINVAL;
> + }
> +
> + hs_clock_type = dev_read_string(dev, "refclk-type-hs");
> + if (!hs_clock_type) {
> + printf("No UCTL \"refclk-type-hs\"\n");
> + return -EINVAL;
> + }
> +
> + if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
> + if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0) {
> + ref_clk_sel = 0;
> + } else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
> + ref_clk_sel = 2;
> + } else {
> + printf("Invalid HS clock type %s, using pll_ref_clk\n",
> + hs_clock_type);
> + }
> + } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
> + if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0) {
> + ref_clk_sel = 1;
> + } else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
> + ref_clk_sel = 3;
> + } else {
> + printf("Invalid HS clock type %s, using pll_ref_clk\n",
> + hs_clock_type);
> + ref_clk_sel = 3;
> + }
> + } else {
> + printf("Invalid SS clock type %s, using dlmc_ref_clk0\n",
> + ss_clock_type);
> + }
> +
> + if ((ref_clk_sel == 0 || ref_clk_sel == 1) && clock_rate != 100000000) {
nits: use a macro for 100000000
> + printf("Invalid UCTL clock rate of %u, using 100000000\n",
> + clock_rate);
> + }
> +
> + /*
> + * Step 1: Wait for all voltages to be stable...that surely
> + * happened before starting the kernel. SKIP
> + */
For Linux kernel this could be skipped, howerver U-Boot should set up these, no?
> +
> + /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */
ditto
> +
> + /* Step 3: Assert all resets. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl |= UCTL_CTL_UCTL_RST | UCTL_CTL_UAHC_RST | UCTL_CTL_UPHY_RST;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + /* Step 4a: Reset the clock dividers. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl |= UCTL_CTL_H_CLKDIV_RST;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + /* Step 4b: Select controller clock frequency. */
> + for (div = ARRAY_SIZE(clk_div) - 1; div >= 0; div--) {
> + h_clk_rate = gd->bus_clk / clk_div[div];
> + if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE &&
> + h_clk_rate >= OCTEON_MIN_H_CLK_RATE)
> + break;
> + }
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl &= ~UCTL_CTL_H_CLKDIV_SEL;
> + uctl_ctl |= FIELD_PREP(UCTL_CTL_H_CLKDIV_SEL, div);
> + uctl_ctl |= UCTL_CTL_H_CLK_EN;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + if (div != FIELD_GET(UCTL_CTL_H_CLKDIV_SEL, uctl_ctl) ||
> + !(uctl_ctl & UCTL_CTL_H_CLK_EN)) {
> + printf("dwc3 controller clock init failure\n");
> + return -EINVAL;
> + }
> +
> + /* Step 4c: Deassert the controller clock divider reset. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl &= ~UCTL_CTL_H_CLKDIV_RST;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + /* Step 5a: Reference clock configuration. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl &= ~UCTL_CTL_REF_CLK_SEL;
> + uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_SEL, ref_clk_sel);
> + uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
> + uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x07);
> + uctl_ctl &= ~UCTL_CTL_REF_CLK_DIV2;
> +
> + switch (clock_rate) {
> + default:
> + printf("Invalid ref_clk %u, using 100000000 instead\n",
> + clock_rate);
> + fallthrough;
> + case 100000000:
nits: please define some macros for these numbers:
> + mpll_mul = 0x19;
> + if (ref_clk_sel < 2) {
> + uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
> + uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x27);
> + }
> + break;
> + case 50000000:
> + mpll_mul = 0x32;
> + break;
> + case 125000000:
> + mpll_mul = 0x28;
> + break;
> + }
> + uctl_ctl &= ~UCTL_CTL_MPLL_MULTIPLIER;
> + uctl_ctl |= FIELD_PREP(UCTL_CTL_MPLL_MULTIPLIER, mpll_mul);
> +
> + /* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
> + uctl_ctl |= UCTL_CTL_SSC_EN;
> +
> + /* Step 5c: Enable SuperSpeed. */
> + uctl_ctl |= UCTL_CTL_REF_SSP_EN;
> +
> + /* Step 5d: Configure PHYs. SKIP */
> +
> + /* Step 6a & 6b: Power up PHYs. */
> + uctl_ctl |= UCTL_CTL_HS_POWER_EN;
> + uctl_ctl |= UCTL_CTL_SS_POWER_EN;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + /* Step 7: Wait 10 controller-clock cycles to take effect. */
> + udelay(10);
> +
> + /* Step 8a: Deassert UCTL reset signal. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl &= ~UCTL_CTL_UCTL_RST;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + /* Step 8b: Wait 10 controller-clock cycles. */
> + udelay(10);
> +
> + /* Step 8c: Setup power-power control. */
> + if (dwc3_octeon_config_power(dev, base)) {
> + printf("Error configuring power\n");
> + return -EINVAL;
> + }
> +
> + /* Step 8d: Deassert UAHC reset signal. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl &= ~UCTL_CTL_UAHC_RST;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + /* Step 8e: Wait 10 controller-clock cycles. */
> + udelay(10);
> +
> + /* Step 9: Enable conditional coprocessor clock of UCTL. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl |= UCTL_CTL_SCLK_EN;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + /* Step 10: Set for host mode only. */
> + uctl_ctl = ioread64(uctl_ctl_reg);
> + uctl_ctl &= ~UCTL_CTL_DRD_MODE;
> + iowrite64(uctl_ctl, uctl_ctl_reg);
> +
> + return 0;
> +}
> +
> +static void dwc3_octeon_set_endian_mode(void __iomem *base)
> +{
> + u64 shim_cfg;
> +
> + shim_cfg = ioread64(base + UCTL_SHIM_CFG);
> + shim_cfg &= ~UCTL_SHIM_CFG_CSR_ENDIAN_MODE;
> + shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1);
> + shim_cfg &= ~UCTL_SHIM_CFG_DMA_ENDIAN_MODE;
> + shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1);
> + iowrite64(shim_cfg, base + UCTL_SHIM_CFG);
> +}
> +
> +static void dwc3_octeon_phy_reset(void __iomem *base)
> +{
> + u64 uctl_ctl;
> +
> + uctl_ctl = ioread64(base);
> + uctl_ctl &= ~UCTL_CTL_UPHY_RST;
> + iowrite64(uctl_ctl, base);
> +}
> +
> +static int octeon_dwc3_glue_probe(struct udevice *dev)
> +{
> + void __iomem *base;
> +
> + base = dev_remap_addr(dev);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + dwc3_octeon_clocks_start(dev, base);
> + dwc3_octeon_set_endian_mode(base);
> + dwc3_octeon_phy_reset(base);
> +
> + return 0;
> +}
> +
> +static int octeon_dwc3_glue_bind(struct udevice *dev)
> +{
> + ofnode node, dwc3_node;
> +
> + /* Find snps,dwc3 node from subnode */
> + dwc3_node = ofnode_null();
> + ofnode_for_each_subnode(node, dev->node) {
> + if (ofnode_device_is_compatible(node, "snps,dwc3"))
> + dwc3_node = node;
> + }
> +
> + if (!ofnode_valid(dwc3_node)) {
> + printf("Can't find dwc3 subnode for %s\n", dev->name);
> + return -ENODEV;
> + }
> +
> + return dm_scan_fdt_dev(dev);
> +}
> +
> +static int octeon_dwc3_glue_remove(struct udevice *dev)
> +{
> + return 0;
> +}
> +
> +static const struct udevice_id octeon_dwc3_glue_ids[] = {
> + { .compatible = "cavium,octeon-7130-usb-uctl" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(dwc3_octeon_glue) = {
> + .name = "dwc3_octeon_glue",
> + .id = UCLASS_NOP,
> + .of_match = octeon_dwc3_glue_ids,
> + .probe = octeon_dwc3_glue_probe,
> + .remove = octeon_dwc3_glue_remove,
remove this function as it's empty
> + .bind = octeon_dwc3_glue_bind,
> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
> +};
> --
Regards,
Bin
More information about the U-Boot
mailing list