[PATCH v4 1/1] cmd: provide command sbi
Heinrich Schuchardt
xypron.glpk at gmx.de
Thu Aug 20 13:54:44 CEST 2020
On 20.08.20 13:30, Pragnesh Patel wrote:
> Hi Heinrich,
>
>> -----Original Message-----
>> From: Heinrich Schuchardt <xypron.glpk at gmx.de>
>> Sent: 20 August 2020 16:23
>> To: Rick Chen <rick at andestech.com>
>> Cc: Bin Meng <bmeng.cn at gmail.com>; Pragnesh Patel
>> <pragnesh.patel at openfive.com>; Lukas Auer <lukas at auer.io>; Atish Patra
>> <atish.patra at wdc.com>; u-boot at lists.denx.de; Heinrich Schuchardt
>> <xypron.glpk at gmx.de>; Bin Meng <bin.meng at windriver.com>
>> Subject: [PATCH v4 1/1] cmd: provide command sbi
>>
>> [External Email] Do not click links or attachments unless you recognize the
>> sender and know the content is safe
>>
>> Provide a command to display information about the SBI implementation.
>>
>> The output might look like:
>>
>> => sbi
>> SBI 0.2
>> OpenSBI
>> Extensions:
>> sbi_set_timer
>> sbi_console_putchar
>> sbi_console_getchar
>> sbi_clear_ipi
>> sbi_send_ipi
>> sbi_remote_fence_i
>> sbi_remote_sfence_vma
>> sbi_remote_sfence_vma_asid
>> sbi_shutdown
>> SBI Base Functionality
>> Timer Extension
>> IPI Extension
>> RFENCE Extension
>> Hart State Management Extension
>>
>> The command can be used to construct a unit test checking that the
>> communication with the SEE is working.
>>
>> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
>> Reviewed-by: Atish Patra <atish.patra at wdc.com>
>> Reviewed-by: Bin Meng <bin.meng at windriver.com>
>> Tested-by: Bin Meng <bin.meng at windriver.com>
>> ---
>> v4:
>> only show command name 'sbi' as short description in Kconfig menu
>> as suggested by Bin
>> v3:
>> add dependency on CONFIG_SBI_V02
>> use lower case for sbi in Kconfig
>> v2:
>> provide a non-blank long help text
>> ---
>> arch/riscv/include/asm/sbi.h | 2 +
>> arch/riscv/lib/sbi.c | 36 ++++++++++++++++
>> cmd/Kconfig | 6 +++
>> cmd/riscv/Makefile | 1 +
>> cmd/riscv/sbi.c | 82 ++++++++++++++++++++++++++++++++++++
>> 5 files changed, 127 insertions(+)
>> create mode 100644 cmd/riscv/sbi.c
>>
>> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h index
>> 08e1ac0c0e..53ca316180 100644
>> --- a/arch/riscv/include/asm/sbi.h
>> +++ b/arch/riscv/include/asm/sbi.h
>> @@ -115,6 +115,8 @@ void sbi_remote_sfence_vma_asid(const unsigned long
>> *hart_mask,
>> unsigned long asid); #endif void sbi_set_timer(uint64_t
>> stime_value);
>> +long sbi_get_spec_version(void);
>> +int sbi_get_impl_id(void);
>> int sbi_probe_extension(int ext);
>>
>> #endif
>> diff --git a/arch/riscv/lib/sbi.c b/arch/riscv/lib/sbi.c index
>> 8fbc23839d..920889ed13 100644
>> --- a/arch/riscv/lib/sbi.c
>> +++ b/arch/riscv/lib/sbi.c
>> @@ -53,6 +53,42 @@ void sbi_set_timer(uint64_t stime_value) #endif }
>>
>> +/**
>> + * sbi_get_spec_version() - get current SBI specification version
>> + *
>> + * Return: version id
>> + */
>> +long sbi_get_spec_version(void)
>> +{
>> + struct sbiret ret;
>> +
>> + ret = sbi_ecall(SBI_EXT_BASE, SBI_EXT_BASE_GET_SPEC_VERSION,
>> + 0, 0, 0, 0, 0, 0);
>> + if (!ret.error)
>> + if (ret.value)
>> + return ret.value;
>> +
>> + return -ENOTSUPP;
>> +}
>> +
>> +/**
>> + * sbi_get_impl_id() - get SBI implementation ID
>> + *
>> + * Return: implementation ID
>> + */
>> +int sbi_get_impl_id(void)
>> +{
>> + struct sbiret ret;
>> +
>> + ret = sbi_ecall(SBI_EXT_BASE, SBI_EXT_BASE_GET_IMP_ID,
>> + 0, 0, 0, 0, 0, 0);
>> + if (!ret.error)
>> + if (ret.value)
>> + return ret.value;
>> +
>> + return -ENOTSUPP;
>> +}
>> +
>> /**
>> * sbi_probe_extension() - Check if an SBI extension ID is supported or not.
>> * @extid: The extension ID to be probed.
>> diff --git a/cmd/Kconfig b/cmd/Kconfig
>> index 9ad511aa17..8feeb0ddb0 100644
>> --- a/cmd/Kconfig
>> +++ b/cmd/Kconfig
>> @@ -270,6 +270,12 @@ config SPL_CMD_TLV_EEPROM
>> help
>> Read system EEPROM data block in ONIE Tlvinfo format from SPL.
>>
>> +config CMD_SBI
>> + bool "sbi"
>> + depends on RISCV_SMODE && SBI_V02
>> + help
>> + Display information about the SBI implementation.
>> +
>> endmenu
>>
>> menu "Boot commands"
>> diff --git a/cmd/riscv/Makefile b/cmd/riscv/Makefile index
>> 24df023ece..1e6ac364e3 100644
>> --- a/cmd/riscv/Makefile
>> +++ b/cmd/riscv/Makefile
>> @@ -1,3 +1,4 @@
>> # SPDX-License-Identifier: GPL-2.0+
>>
>> obj-$(CONFIG_CMD_EXCEPTION) += exception.o
>> +obj-$(CONFIG_CMD_SBI) += sbi.o
>> diff --git a/cmd/riscv/sbi.c b/cmd/riscv/sbi.c new file mode 100644 index
>> 0000000000..7c9151f436
>> --- /dev/null
>> +++ b/cmd/riscv/sbi.c
>> @@ -0,0 +1,82 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * The 'sbi' command displays information about the SBI implementation.
>> + *
>> + * Copyright (c) 2020, Heinrich Schuchardt <xypron.glpk at gmx.de> */
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <asm/sbi.h>
>> +
>> +struct sbi_ext {
>> + const u32 id;
>> + const char *name;
>> +};
>> +
>> +static struct sbi_ext extensions[] = {
>> + { 0x00000000, "sbi_set_timer" },
>> + { 0x00000001, "sbi_console_putchar" },
>> + { 0x00000002, "sbi_console_getchar" },
>> + { 0x00000003, "sbi_clear_ipi" },
>> + { 0x00000004, "sbi_send_ipi" },
>> + { 0x00000005, "sbi_remote_fence_i" },
>> + { 0x00000006, "sbi_remote_sfence_vma" },
>> + { 0x00000007, "sbi_remote_sfence_vma_asid" },
>> + { 0x00000008, "sbi_shutdown" },
>> + { 0x00000010, "SBI Base Functionality" },
>> + { 0x54494D45, "Timer Extension" },
>> + { 0x00735049, "IPI Extension" },
>> + { 0x52464E43, "RFENCE Extension" },
>> + { 0x0048534D, "Hart State Management Extension" }, };
>> +
>> +static int do_sbi(struct cmd_tbl *cmdtp, int flag, int argc,
>> + char *const argv[])
>> +{
>> + int i;
>> + long ret;
>
> We should also check here like,
>
> if (argc > 1)
> return CMD_RET_USAGE;
In the command definition I should change maxargs to 1 (including the
command itself).
A separate test here is superfluous.
Best regards
Heinrich
>
>> +
>> + ret = sbi_get_spec_version();
>> + if (ret >= 0)
>> + printf("SBI %ld.%ld\n", ret >> 24, ret & 0xffffff);
>> + ret = sbi_get_impl_id();
>> + if (ret >= 0) {
>> + switch (ret) {
>> + case 0:
>> + printf("Berkeley Boot Loader (BBL)\n");
>> + break;
>> + case 1:
>> + printf("OpenSBI\n");
>> + break;
>> + case 2:
>> + printf("Xvisor\n");
>> + break;
>> + case 3:
>> + printf("KVM\n");
>> + break;
>> + default:
>> + printf("Unknown implementation\n");
>> + break;
>> + }
>> + }
>> + printf("Extensions:\n");
>> + for (i = 0; i < ARRAY_SIZE(extensions); ++i) {
>> + ret = sbi_probe_extension(extensions[i].id);
>> + if (ret > 0)
>> + printf(" %s\n", extensions[i].name);
>> + }
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_SYS_LONGHELP
>> +static char sbi_help_text[] =
>> + "- display SBI spec version, implementation, and available
>> +extensions";
>> +
>> +#endif
>> +
>> +U_BOOT_CMD_COMPLETE(
>> + sbi, 2, 0, do_sbi,
>> + "display SBI information",
>> + sbi_help_text, NULL
>> +);
>> --
>> 2.28.0
>
More information about the U-Boot
mailing list