[PATCH v2 31/57] x86: acpi: Add support for additional Intel tables
Simon Glass
sjg at chromium.org
Sun Aug 30 01:31:50 CEST 2020
Apollo Lake needs to generate a few more table types used on Intel SoCs.
Add support for these into the x86 ACPI code.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
Changes in v1:
- Move this code into an x86-specific file
- Update commit message
- Use OEM_TABLE_ID instead of ACPI_TABLE_CREATOR
arch/x86/include/asm/acpi_table.h | 115 ++++++++++++++++++++++++++++++
arch/x86/lib/acpi_table.c | 111 ++++++++++++++++++++++++++++
include/acpi/acpi_table.h | 43 +++++++++++
3 files changed, 269 insertions(+)
diff --git a/arch/x86/include/asm/acpi_table.h b/arch/x86/include/asm/acpi_table.h
index 3245e447813..faf31730730 100644
--- a/arch/x86/include/asm/acpi_table.h
+++ b/arch/x86/include/asm/acpi_table.h
@@ -98,4 +98,119 @@ int arch_write_sci_irq_select(uint scis);
*/
int arch_madt_sci_irq_polarity(int sci);
+/**
+ * acpi_create_dmar_drhd() - Create a table for DMA remapping with the IOMMU
+ *
+ * See here for the specification
+ * https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf
+ *
+ * @ctx: ACPI context pointer
+ * @flags: (DRHD_INCLUDE_...)
+ * @segment: PCI segment asscociated with this unit
+ * @bar: Base address of remapping hardware register-set for this unit
+ */
+void acpi_create_dmar_drhd(struct acpi_ctx *ctx, uint flags, uint segment,
+ u64 bar);
+
+/**
+ * acpi_create_dmar_rmrr() - Set up an RMRR
+ *
+ * This sets up a Reserved-Memory Region Reporting structure, used to allow
+ * DMA to regions used by devices that the BIOS controls.
+ *
+ * @ctx: ACPI context pointer
+ * @segment: PCI segment asscociated with this unit
+ * @bar: Base address of mapping
+ * @limit: End address of mapping
+ */
+void acpi_create_dmar_rmrr(struct acpi_ctx *ctx, uint segment, u64 bar,
+ u64 limit);
+
+/**
+ * acpi_dmar_drhd_fixup() - Set the length of an DRHD
+ *
+ * This sets the DRHD length field based on the current ctx->current
+ *
+ * @ctx: ACPI context pointer
+ * @base: Address of the start of the DRHD
+ */
+void acpi_dmar_drhd_fixup(struct acpi_ctx *ctx, void *base);
+
+/**
+ * acpi_dmar_rmrr_fixup() - Set the length of an RMRR
+ *
+ * This sets the RMRR length field based on the current ctx->current
+ *
+ * @ctx: ACPI context pointer
+ * @base: Address of the start of the RMRR
+ */
+void acpi_dmar_rmrr_fixup(struct acpi_ctx *ctx, void *base);
+
+/**
+ * acpi_create_dmar_ds_pci() - Set up a DMAR scope for a PCI device
+ *
+ * @ctx: ACPI context pointer
+ * @bdf: PCI device to add
+ * @return length of mapping in bytes
+ */
+int acpi_create_dmar_ds_pci(struct acpi_ctx *ctx, pci_dev_t bdf);
+
+/**
+ * acpi_create_dmar_ds_pci_br() - Set up a DMAR scope for a PCI bridge
+ *
+ * This is used to provide a mapping for a PCI bridge
+ *
+ * @ctx: ACPI context pointer
+ * @bdf: PCI device to add
+ * @return length of mapping in bytes
+ */
+int acpi_create_dmar_ds_pci_br(struct acpi_ctx *ctx, pci_dev_t bdf);
+
+/**
+ * acpi_create_dmar_ds_ioapic() - Set up a DMAR scope for an IOAPIC device
+ *
+ * @ctx: ACPI context pointer
+ * @enumeration_id: Enumeration ID (typically 2)
+ * @bdf: PCI device to add
+ * @return length of mapping in bytes
+ */
+int acpi_create_dmar_ds_ioapic(struct acpi_ctx *ctx, uint enumeration_id,
+ pci_dev_t bdf);
+
+/**
+ * acpi_create_dmar_ds_msi_hpet() - Set up a DMAR scope for an HPET
+ *
+ * Sets up a scope for a High-Precision Event Timer that supports
+ * Message-Signalled Interrupts
+ *
+ * @ctx: ACPI context pointer
+ * @enumeration_id: Enumeration ID (typically 0)
+ * @bdf: PCI device to add
+ * @return length of mapping in bytes
+ */
+int acpi_create_dmar_ds_msi_hpet(struct acpi_ctx *ctx, uint enumeration_id,
+ pci_dev_t bdf);
+
+/**
+ * acpi_fadt_common() - Handle common parts of filling out an FADT
+ *
+ * This sets up the Fixed ACPI Description Table
+ *
+ * @fadt: Pointer to place to put FADT
+ * @facs: Pointer to the FACS
+ * @dsdt: Pointer to the DSDT
+ */
+void acpi_fadt_common(struct acpi_fadt *fadt, struct acpi_facs *facs,
+ void *dsdt);
+
+/**
+ * intel_acpi_fill_fadt() - Set up the contents of the FADT
+ *
+ * This sets up parts of the Fixed ACPI Description Table that are common to
+ * Intel chips
+ *
+ * @fadt: Pointer to place to put FADT
+ */
+void intel_acpi_fill_fadt(struct acpi_fadt *fadt);
+
#endif /* __ASM_ACPI_TABLE_H__ */
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index 28a27103342..b0cc1f123e2 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -616,3 +616,114 @@ int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev,
return 0;
}
+
+void acpi_fadt_common(struct acpi_fadt *fadt, struct acpi_facs *facs,
+ void *dsdt)
+{
+ struct acpi_table_header *header = &fadt->header;
+
+ memset((void *)fadt, '\0', sizeof(struct acpi_fadt));
+
+ acpi_fill_header(header, "FACP");
+ header->length = sizeof(struct acpi_fadt);
+ header->revision = 4;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, OEM_TABLE_ID, 8);
+ memcpy(header->aslc_id, ASLC_ID, 4);
+ header->aslc_revision = 1;
+
+ fadt->firmware_ctrl = (unsigned long)facs;
+ fadt->dsdt = (unsigned long)dsdt;
+
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->preferred_pm_profile = ACPI_PM_MOBILE;
+
+ /* Use ACPI 3.0 revision */
+ fadt->header.revision = 4;
+}
+
+void acpi_create_dmar_drhd(struct acpi_ctx *ctx, uint flags, uint segment,
+ u64 bar)
+{
+ struct dmar_entry *drhd = ctx->current;
+
+ memset(drhd, '\0', sizeof(*drhd));
+ drhd->type = DMAR_DRHD;
+ drhd->length = sizeof(*drhd); /* will be fixed up later */
+ drhd->flags = flags;
+ drhd->segment = segment;
+ drhd->bar = bar;
+ acpi_inc(ctx, drhd->length);
+}
+
+void acpi_create_dmar_rmrr(struct acpi_ctx *ctx, uint segment, u64 bar,
+ u64 limit)
+{
+ struct dmar_rmrr_entry *rmrr = ctx->current;
+
+ memset(rmrr, '\0', sizeof(*rmrr));
+ rmrr->type = DMAR_RMRR;
+ rmrr->length = sizeof(*rmrr); /* will be fixed up later */
+ rmrr->segment = segment;
+ rmrr->bar = bar;
+ rmrr->limit = limit;
+ acpi_inc(ctx, rmrr->length);
+}
+
+void acpi_dmar_drhd_fixup(struct acpi_ctx *ctx, void *base)
+{
+ struct dmar_entry *drhd = base;
+
+ drhd->length = ctx->current - base;
+}
+
+void acpi_dmar_rmrr_fixup(struct acpi_ctx *ctx, void *base)
+{
+ struct dmar_rmrr_entry *rmrr = base;
+
+ rmrr->length = ctx->current - base;
+}
+
+static int acpi_create_dmar_ds(struct acpi_ctx *ctx, enum dev_scope_type type,
+ uint enumeration_id, pci_dev_t bdf)
+{
+ /* we don't support longer paths yet */
+ const size_t dev_scope_length = sizeof(struct dev_scope) + 2;
+ struct dev_scope *ds = ctx->current;
+
+ memset(ds, '\0', dev_scope_length);
+ ds->type = type;
+ ds->length = dev_scope_length;
+ ds->enumeration = enumeration_id;
+ ds->start_bus = PCI_BUS(bdf);
+ ds->path[0].dev = PCI_DEV(bdf);
+ ds->path[0].fn = PCI_FUNC(bdf);
+
+ return ds->length;
+}
+
+int acpi_create_dmar_ds_pci_br(struct acpi_ctx *ctx, pci_dev_t bdf)
+{
+ return acpi_create_dmar_ds(ctx, SCOPE_PCI_SUB, 0, bdf);
+}
+
+int acpi_create_dmar_ds_pci(struct acpi_ctx *ctx, pci_dev_t bdf)
+{
+ return acpi_create_dmar_ds(ctx, SCOPE_PCI_ENDPOINT, 0, bdf);
+}
+
+int acpi_create_dmar_ds_ioapic(struct acpi_ctx *ctx, uint enumeration_id,
+ pci_dev_t bdf)
+{
+ return acpi_create_dmar_ds(ctx, SCOPE_IOAPIC, enumeration_id, bdf);
+}
+
+int acpi_create_dmar_ds_msi_hpet(struct acpi_ctx *ctx, uint enumeration_id,
+ pci_dev_t bdf)
+{
+ return acpi_create_dmar_ds(ctx, SCOPE_MSI_HPET, enumeration_id, bdf);
+}
diff --git a/include/acpi/acpi_table.h b/include/acpi/acpi_table.h
index c826a797f5b..a2e510cf56e 100644
--- a/include/acpi/acpi_table.h
+++ b/include/acpi/acpi_table.h
@@ -377,6 +377,49 @@ struct acpi_csrt_shared_info {
u32 max_block_size;
};
+/* Port types for ACPI _UPC object */
+enum acpi_upc_type {
+ UPC_TYPE_A,
+ UPC_TYPE_MINI_AB,
+ UPC_TYPE_EXPRESSCARD,
+ UPC_TYPE_USB3_A,
+ UPC_TYPE_USB3_B,
+ UPC_TYPE_USB3_MICRO_B,
+ UPC_TYPE_USB3_MICRO_AB,
+ UPC_TYPE_USB3_POWER_B,
+ UPC_TYPE_C_USB2_ONLY,
+ UPC_TYPE_C_USB2_SS_SWITCH,
+ UPC_TYPE_C_USB2_SS,
+ UPC_TYPE_PROPRIETARY = 0xff,
+ /*
+ * The following types are not directly defined in the ACPI
+ * spec but are used by coreboot to identify a USB device type.
+ */
+ UPC_TYPE_INTERNAL = 0xff,
+ UPC_TYPE_UNUSED,
+ UPC_TYPE_HUB
+};
+
+enum dev_scope_type {
+ SCOPE_PCI_ENDPOINT = 1,
+ SCOPE_PCI_SUB = 2,
+ SCOPE_IOAPIC = 3,
+ SCOPE_MSI_HPET = 4,
+ SCOPE_ACPI_NAMESPACE_DEVICE = 5
+};
+
+struct __packed dev_scope {
+ u8 type;
+ u8 length;
+ u8 reserved[2];
+ u8 enumeration;
+ u8 start_bus;
+ struct {
+ u8 dev;
+ u8 fn;
+ } __packed path[0];
+};
+
enum dmar_type {
DMAR_DRHD = 0,
DMAR_RMRR = 1,
--
2.28.0.402.g5ffc5be6b7-goog
More information about the U-Boot
mailing list