[PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver

[Pali Rohár]

On Monday 31 August 2020 05:25:38 Andre Heider wrote:
> From: Grzegorz Jaszczyk <jaz at semihalf.com>
> 
> The settings of reference clock is done via pcie address space and not
> comphy address space - move the settings in appropriate place.
> 
> This aligns hw initialization of pcie advk with Linux and also will allow
> to get rid of not comphy related operation from the comphy driver.
> 
> Change-Id: I9cc2e8f3e415a880dfb01d10cc8db73b7e81a605
> Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
> Reviewed-on: http://vgitil04.il.marvell.com:8080/59619
> Reviewed-by: Igal Liberman <igall at marvell.com>
> Tested-by: iSoC Platform CI <ykjenk at marvell.com>
> [a.heider: adapt to mainline]
> Signed-off-by: Andre Heider <a.heider at gmail.com>
> ---
> Missing downstream patch, noticed while diffing branches:
> https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/e3d9c015d434f755578a86a4b6b3acd17d69238a

It looks like this patch only moves initialization code from one file to
another. It is fixing some issue? I have tested PCIe on both MOX and
Espressobin and it worked fine. If there is no issue I would rather wait
for Marek comphy patches which should completely remove current marvell
comphy driver from u-boot.

>  drivers/pci/pci-aardvark.c         | 8 ++++++++
>  drivers/phy/marvell/comphy_a3700.c | 4 ++--
>  drivers/phy/marvell/comphy_a3700.h | 5 -----
>  3 files changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
> index b2c417701f..8d1748ec0a 100644
> --- a/drivers/pci/pci-aardvark.c
> +++ b/drivers/pci/pci-aardvark.c
> @@ -95,6 +95,11 @@
>  #define     PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE	BIT(5)
>  #define     PCIE_CORE_CTRL2_ADDRWIN_MAP_ENABLE	BIT(6)
>  
> +#define PCIE_PHY_REF_CLOCK			(CONTROL_BASE_ADDR + 0x14)
> +#define     PCIE_PHY_CTRL_OFF			16
> +#define     PCIE_PHY_BUF_CTRL_OFF		0
> +#define     PCIE_PHY_BUF_CTRL_INIT_VAL		0x1342
> +
>  /* LMI registers base address and register offsets */
>  #define LMI_BASE_ADDR				0x6000
>  #define CFG_REG					(LMI_BASE_ADDR + 0x0)
> @@ -515,6 +520,9 @@ static int pcie_advk_setup_hw(struct pcie_advk *pcie)
>  {
>  	u32 reg;
>  
> +	/* Set HW Reference Clock Buffer Control */
> +	advk_writel(pcie, PCIE_PHY_BUF_CTRL_INIT_VAL, PCIE_PHY_REF_CLOCK);
> +
>  	/* Set to Direct mode */
>  	reg = advk_readl(pcie, CTRL_CONFIG_REG);
>  	reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
> diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
> index 4606de6f48..d460dc345a 100644
> --- a/drivers/phy/marvell/comphy_a3700.c
> +++ b/drivers/phy/marvell/comphy_a3700.c
> @@ -202,9 +202,9 @@ static int comphy_pcie_power_up(u32 speed, u32 invert)
>  		  0xA00D | rb_clk500m_en | rb_clk100m_125m_en, 0xFFFF);
>  
>  	/*
> -	 * 7. Enable TX
> +	 * 7. Enable TX, PCIE global register, 0xd0074814, it is done in
> +	 * PCI-E driver
>  	 */
> -	reg_set(PCIE_REF_CLK_ADDR, 0x1342, 0xFFFFFFFF);
>  
>  	/*
>  	 * 8. Check crystal jumper setting and program the Power and PLL
> diff --git a/drivers/phy/marvell/comphy_a3700.h b/drivers/phy/marvell/comphy_a3700.h
> index b0941ffb37..db69393c1b 100644
> --- a/drivers/phy/marvell/comphy_a3700.h
> +++ b/drivers/phy/marvell/comphy_a3700.h
> @@ -45,9 +45,6 @@
>  /*
>   * PCIe/USB/SGMII definitions
>   */
> -#define PCIE_BASE			MVEBU_REG(0x070000)
> -#define PCIETOP_BASE			MVEBU_REG(0x080000)
> -#define PCIE_RAMBASE			MVEBU_REG(0x08C000)
>  #define PCIEPHY_BASE			MVEBU_REG(0x01F000)
>  #define PCIEPHY_SHFT			2
>  
> @@ -166,8 +163,6 @@ static inline void __iomem *phy_addr(enum phy_unit unit, u32 addr)
>  
>  #define PWR_MGM_TIM1			0x1d0
>  
> -#define PCIE_REF_CLK_ADDR		(PCIE_BASE + 0x4814)
> -
>  #define USB3_CTRPUL_VAL_REG		(0x20 + USB32_BASE)
>  #define USB3H_CTRPUL_VAL_REG		(0x3454 + USB32H_BASE)
>  #define rb_usb3_ctr_100ns		0xff000000
> -- 
> 2.28.0
>