[PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Stefan Roese
sr at denx.de
Mon Aug 31 15:05:22 CEST 2020
On 19.08.20 16:24, Pali Rohár wrote:
> Due to different partition layouts in different U-Boot versions, DTS for
> Espressobin in Linux does not contain any definition of MTD partitions.
> See commit https://git.kernel.org/stable/c/00954566464a4 for more details.
>
> This patch via ft_board_setup() hook fills current partition layout used by
> U-Boot, so booted kernel would see correct MTD partitions layout.
>
> U-Boot env partition is calculated from CONFIG_ENV_OFFSET option.
>
> First partition contains secure firmware, ARM trusted firmware and U-Boot
> with checksums. So it is not possible to replace just one image (e.g.
> U-Boot) without updating other parts where is stored checksum of U-Boot.
> Therefore there is no extra partition defined for U-Boot and first
> partition is called just 'firmware'.
>
> Signed-off-by: Pali Rohár <pali at kernel.org>
Applied to u-boot-marvell/master
Thanks,
Stefan
> ---
> board/Marvell/mvebu_armada-37xx/board.c | 100 ++++++++++++++++++++
> configs/mvebu_espressobin-88f3720_defconfig | 1 +
> 2 files changed, 101 insertions(+)
>
> diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
> index 031de318c6..7b9c3223ed 100644
> --- a/board/Marvell/mvebu_armada-37xx/board.c
> +++ b/board/Marvell/mvebu_armada-37xx/board.c
> @@ -243,3 +243,103 @@ int board_network_enable(struct mii_dev *bus)
>
> return 0;
> }
> +
> +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
> +int ft_board_setup(void *blob, struct bd_info *bd)
> +{
> + int ret;
> + int spi_off;
> + int parts_off;
> + int part_off;
> +
> + /* Fill SPI MTD partitions for Linux kernel on Espressobin */
> + if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + return 0;
> +
> + spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
> + if (spi_off < 0)
> + return 0;
> +
> + /* Do not touch partitions if they are already defined */
> + if (fdt_subnode_offset(blob, spi_off, "partitions") >= 0)
> + return 0;
> +
> + parts_off = fdt_add_subnode(blob, spi_off, "partitions");
> + if (parts_off < 0) {
> + printf("Can't add partitions node: %s\n", fdt_strerror(parts_off));
> + return 0;
> + }
> +
> + ret = fdt_setprop_string(blob, parts_off, "compatible", "fixed-partitions");
> + if (ret < 0) {
> + printf("Can't set compatible property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + ret = fdt_setprop_u32(blob, parts_off, "#address-cells", 1);
> + if (ret < 0) {
> + printf("Can't set #address-cells property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + ret = fdt_setprop_u32(blob, parts_off, "#size-cells", 1);
> + if (ret < 0) {
> + printf("Can't set #size-cells property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + /* Add u-boot-env partition */
> +
> + part_off = fdt_add_subnode(blob, parts_off, "partition at u-boot-env");
> + if (part_off < 0) {
> + printf("Can't add partition at u-boot-env node: %s\n", fdt_strerror(part_off));
> + return 0;
> + }
> +
> + ret = fdt_setprop_u32(blob, part_off, "reg", CONFIG_ENV_OFFSET);
> + if (ret < 0) {
> + printf("Can't set partition at u-boot-env reg property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + ret = fdt_appendprop_u32(blob, part_off, "reg", CONFIG_ENV_SIZE);
> + if (ret < 0) {
> + printf("Can't set partition at u-boot-env reg property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + ret = fdt_setprop_string(blob, part_off, "label", "u-boot-env");
> + if (ret < 0) {
> + printf("Can't set partition at u-boot-env label property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + /* Add firmware partition */
> +
> + part_off = fdt_add_subnode(blob, parts_off, "partition at firmware");
> + if (part_off < 0) {
> + printf("Can't add partition at firmware node: %s\n", fdt_strerror(part_off));
> + return 0;
> + }
> +
> + ret = fdt_setprop_u32(blob, part_off, "reg", 0);
> + if (ret < 0) {
> + printf("Can't set partition at firmware reg property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + ret = fdt_appendprop_u32(blob, part_off, "reg", CONFIG_ENV_OFFSET);
> + if (ret < 0) {
> + printf("Can't set partition at firmware reg property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + ret = fdt_setprop_string(blob, part_off, "label", "firmware");
> + if (ret < 0) {
> + printf("Can't set partition at firmware label property: %s\n", fdt_strerror(ret));
> + return 0;
> + }
> +
> + return 0;
> +}
> +#endif
> diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
> index afcdd947c1..0c1c92d4ff 100644
> --- a/configs/mvebu_espressobin-88f3720_defconfig
> +++ b/configs/mvebu_espressobin-88f3720_defconfig
> @@ -82,3 +82,4 @@ CONFIG_SHA1=y
> CONFIG_SHA256=y
> CONFIG_MVNETA=y
> CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_OF_BOARD_SETUP=y
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list