[PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets

Vignesh Raghavendra vigneshr at ti.com
Wed Aug 5 10:50:04 CEST 2020


Hi

On 27/07/20 3:15 pm, Lokesh Vutla wrote:
> j7200-evm has minor differences with j721e-evm based on the IPs
> available in the SoC. Introduce separate build targets for j7200-evm
> to incorporate the differences.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
> ---
>   board/ti/j721e/Kconfig | 53 ++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 53 insertions(+)
> 
> diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
> index e56dc53bfa..2cbe2b2481 100644
> --- a/board/ti/j721e/Kconfig
> +++ b/board/ti/j721e/Kconfig
> @@ -27,6 +27,26 @@ config TARGET_J721E_R5_EVM
>   	imply SYS_K3_SPL_ATF
>   	imply TI_I2C_BOARD_DETECT
>   
> +config TARGET_J7200_A72_EVM
> +	bool "TI K3 based J7200 EVM running on A72"
> +	select ARM64
> +	select SOC_K3_J721E
> +	select BOARD_LATE_INIT
> +	imply TI_I2C_BOARD_DETECT
> +	select SYS_DISABLE_DCACHE_OPS
> +

I don't see update to:

    include/configs/j721e_evm.h          23 #ifdef CONFIG_TARGET_J721E_A72_EVM
    include/configs/j721e_evm.h         130 #ifdef CONFIG_TARGET_J721E_A72_EVM

Don't we need to update j721e_evm.h with TARGET_J7200_A72_EVM?

Regards
Vignesh

> +config TARGET_J7200_R5_EVM
> +	bool "TI K3 based J7200 EVM running on R5"
> +	select CPU_V7R
> +	select SYS_THUMB_BUILD
> +	select SOC_K3_J721E
> +	select K3_LOAD_SYSFW
> +	select RAM
> +	select SPL_RAM
> +	select K3_J721E_DDRSS
> +	imply SYS_K3_SPL_ATF
> +	imply TI_I2C_BOARD_DETECT
> +
>   endchoice
>   
>   if TARGET_J721E_A72_EVM
> @@ -61,3 +81,36 @@ config SPL_LDSCRIPT
>   source "board/ti/common/Kconfig"
>   
>   endif
> +
> +if TARGET_J7200_A72_EVM
> +
> +config SYS_BOARD
> +       default "j721e"
> +
> +config SYS_VENDOR
> +       default "ti"
> +
> +config SYS_CONFIG_NAME
> +       default "j721e_evm"
> +
> +source "board/ti/common/Kconfig"
> +
> +endif
> +
> +if TARGET_J7200_R5_EVM
> +
> +config SYS_BOARD
> +       default "j721e"
> +
> +config SYS_VENDOR
> +       default "ti"
> +
> +config SYS_CONFIG_NAME
> +       default "j721e_evm"
> +
> +config SPL_LDSCRIPT
> +	default "arch/arm/mach-omap2/u-boot-spl.lds"
> +
> +source "board/ti/common/Kconfig"
> +
> +endif
> 


More information about the U-Boot mailing list