[PATCH] spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2

Stefan Roese sr at denx.de
Wed Aug 26 12:03:28 CEST 2020


Hi Jagan,

On 05.08.20 15:07, Stefan Roese wrote:
> Octeon TX2 sets the TB100_EN bit in the config register. We need to use
> a fixed 100MHz clock for this as well to work properly.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Aaron Williams <awilliams at marvell.com>
> Cc: Suneel Garapati <sgarapati at marvell.com>
> Cc: Chandrakala Chavva <cchavva at marvell.com>
> Cc: Jagan Teki <jagan at amarulasolutions.com>
> ---
>   drivers/spi/octeon_spi.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/octeon_spi.c b/drivers/spi/octeon_spi.c
> index 83fe6330a1..7e88e5580f 100644
> --- a/drivers/spi/octeon_spi.c
> +++ b/drivers/spi/octeon_spi.c
> @@ -519,7 +519,10 @@ static int octeon_spi_set_speed(struct udevice *bus, uint max_hz)
>   	if (max_hz > OCTEON_SPI_MAX_CLOCK_HZ)
>   		max_hz = OCTEON_SPI_MAX_CLOCK_HZ;
>   
> -	clk_rate = clk_get_rate(&priv->clk);
> +	if (device_is_compatible(bus, "cavium,thunderx-spi"))
> +		clk_rate = 100000000;
> +	else
> +		clk_rate = clk_get_rate(&priv->clk);
>   	if (IS_ERR_VALUE(clk_rate))
>   		return -EINVAL;
>   

Any updates on this? Are you okay with this patch and plan to push
it upstream soon? Or should I pull it with your Acked-by?

Thanks,
Stefan


More information about the U-Boot mailing list