[PATCH 3/4] watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCs

Simon Glass sjg at chromium.org
Thu Jan 30 03:18:34 CET 2020


On Mon, 20 Jan 2020 at 02:53, Alex Nemirovsky
<Alex.Nemirovsky at cortina-access.com> wrote:
>
> From: Jason Li <jason.li at cortina-access.com>
>
> Add support for hardware watchdog timer on all Cortina Access
> CAxxxx family of SoCs.
>
> Signed-off-by: Jason Li <jason.li at cortina-access.com>
> Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com>
> ---
>
>  MAINTAINERS                    |   2 +
>  drivers/watchdog/Kconfig       |   8 +++
>  drivers/watchdog/Makefile      |   1 +
>  drivers/watchdog/cortina_wdt.c | 144 +++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 155 insertions(+)
>  create mode 100644 drivers/watchdog/cortina_wdt.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b7b3359..f9334f9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -180,6 +180,7 @@ F:  board/cortina/common/*
>  F:     board/cortina/common/Kconfig
>  F:     board/cortina/common/armv8/lowlevel_init.S
>  F:     drivers/gpio/cortina_gpio.c
> +F:     drivers/watchdog/cortina_wdt.c
>
>  ARM/CZ.NIC TURRIS MOX SUPPORT
>  M:     Marek Behun <marek.behun at nic.cz>
> @@ -662,6 +663,7 @@ F:  board/cortina/common/*
>  F:     board/cortina/common/Kconfig
>  F:     board/cortina/common/mips/*
>  F:     drivers/gpio/cortina_gpio.c
> +F:     drivers/watchdog/cortina_wdt.c
>
>  MIPS MSCC
>  M:     Gregory CLEMENT <gregory.clement at bootlin.com>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 8c16d69..2f7dedb 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -99,6 +99,14 @@ config WDT_CDNS
>            Select this to enable Cadence watchdog timer, which can be found on some
>            Xilinx Microzed Platform.
>
> +config WDT_CORTINA
> +       bool "Cortina Access CAxxxx watchdog timer support"
> +       depends on WDT
> +       help
> +         Cortina Access CAxxxx watchdog timer support.
> +         This driver support all CPU ISAs supported by Cortina
> +          Access CAxxxx SoCs.
> +
>  config WDT_MPC8xx
>         bool "MPC8xx watchdog timer support"
>         depends on WDT && MPC8xx
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 955caef..87f92a4 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
>  obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
>  obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
>  obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o
> +obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o
>  obj-$(CONFIG_WDT_ORION) += orion_wdt.o
>  obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
>  obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
> diff --git a/drivers/watchdog/cortina_wdt.c b/drivers/watchdog/cortina_wdt.c
> new file mode 100644
> index 0000000..61df802
> --- /dev/null
> +++ b/drivers/watchdog/cortina_wdt.c
> @@ -0,0 +1,144 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +/*
> + * Copyright (C) 2020 Cortina-Access
> + * Author: Jason Li <jason.li at cortina-access.com>
> + *
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <asm/io.h>
> +#include <wdt.h>
> +
> +#define CA_WDT_CTRL            0x00

Use stryct?

> +#define CA_WDT_PS              0x04
> +#define CA_WDT_DIV             0x08
> +#define CA_WDT_LD              0x0C
> +#define CA_WDT_LOADE           0x10
> +#define CA_WDT_CNT             0x14
> +#define CA_WDT_IE              0x18
> +#define CA_WDT_INT             0x1C
> +#define CA_WDT_STAT            0x20
> +
> +/* CA_WDT_CTRL */
> +#define CTL_WDT_EN             BIT(0)
> +#define CTL_WDT_RSTEN          BIT(1)
> +#define CTL_WDT_CLK_SEL                BIT(2)
> +/* CA_WDT_LOADE */
> +#define WDT_UPD                        BIT(0)
> +#define WDT_UPD_PS             BIT(1)
> +
> +/* Global config */
> +#define WDT_RESET_SUB          BIT(4)
> +#define WDT_RESET_ALL_BLOCK    BIT(6)
> +#define WDT_RESET_REMAP                BIT(7)
> +#define WDT_EXT_RESET          BIT(8)
> +#define WDT_RESET_DEFAULT      (WDT_EXT_RESET | WDT_RESET_REMAP |
> +                                WDT_RESET_ALL_BLOCK | WDT_RESET_SUB)
> +

struct comment

> +struct ca_wdt_priv {
> +       void __iomem *base;
> +       void __iomem *global_config;
> +};
> +
> +static void cortina_wdt_set_timeout(struct udevice *dev, u64 timeout_ms)
> +{
> +       struct ca_wdt_priv *priv = dev_get_priv(dev);
> +
> +       /* Prescale using millisecond unit */
> +       writel(CORTINA_PER_IO_FREQ / 1000, priv->base + CA_WDT_PS);
> +
> +       /* Millisecond */
> +       writel(1, priv->base + CA_WDT_DIV);
> +
> +       writel(timeout_ms, priv->base + CA_WDT_LD);
> +       writel(WDT_UPD | WDT_UPD_PS, priv->base + CA_WDT_LOADE);
> +}
> +
> +static int cortina_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
> +{
> +       struct ca_wdt_priv *priv = dev_get_priv(dev);
> +       unsigned int reg_v;
> +
> +       cortina_wdt_set_timeout(dev, timeout);
> +
> +       /* WDT Reset option */
> +       reg_v = readl(priv->global_config);
> +       reg_v |= WDT_RESET_DEFAULT;
> +       writel(reg_v, priv->global_config);

setbits_le32(), and below

> +
> +       /* Enable WDT */
> +       reg_v = readl(priv->base);
> +       reg_v |= (CTL_WDT_EN | CTL_WDT_RSTEN | CTL_WDT_CLK_SEL);
> +       writel(reg_v, priv->base);
> +
> +       return 0;
> +}
> +
> +static int cortina_wdt_stop(struct udevice *dev)
> +{
> +       struct ca_wdt_priv *priv = dev_get_priv(dev);
> +
> +       /* Disable WDT */
> +       writel(0, priv->base);
> +
> +       return 0;
> +}
> +
> +static int cortina_wdt_reset(struct udevice *dev)
> +{
> +       struct ca_wdt_priv *priv = dev_get_priv(dev);
> +
> +       /* Reload WDT counter */
> +       writel(WDT_UPD, priv->base + CA_WDT_LOADE);
> +
> +       return 0;
> +}
> +
> +static int cortina_wdt_expire_now(struct udevice *dev, ulong flags)
> +{
> +       /* Set 1ms timeout to reset system */
> +       cortina_wdt_set_timeout(dev, 1);
> +       hang();

This hang() should be moved to the calling function, wdt_expire_now()
and drivers adjusted accordingly. This is a bit like the sysreset
case. This function should return -EINPROGRESS.

> +
> +       return 0;
> +}
> +
> +static int cortina_wdt_probe(struct udevice *dev)
> +{
> +       struct ca_wdt_priv *priv = dev_get_priv(dev);
> +
> +       priv->base = dev_remap_addr_index(dev, 0);
> +       if (!priv->base)
> +               return -ENOENT;

-EINVAL

> +
> +       priv->global_config = dev_remap_addr_index(dev, 1);
> +       if (!priv->global_config)
> +               return -ENOENT;

Same

BTW both of these should be in an ofdata_to_platadata() method.

> +
> +       /* Stop WDT */
> +       cortina_wdt_stop(dev);

Only this should be in the prove() method.

> +
> +       return 0;
> +}
> +
> +static const struct wdt_ops cortina_wdt_ops = {
> +       .start = cortina_wdt_start,
> +       .reset = cortina_wdt_reset,
> +       .stop = cortina_wdt_stop,
> +       .expire_now = cortina_wdt_expire_now,
> +};
> +
> +static const struct udevice_id cortina_wdt_ids[] = {
> +       {.compatible = "cortina,cortina-wdt"},
> +       {}
> +};
> +
> +U_BOOT_DRIVER(cortina_wdt) = {
> +       .name = "cortina_wdt",
> +       .id = UCLASS_WDT,
> +       .probe = cortina_wdt_probe,
> +       .of_match = cortina_wdt_ids,
> +       .ops = &cortina_wdt_ops,
> +};
> --
> 2.7.4
>

Regards,
Simon


More information about the U-Boot mailing list