[PATCH] rockchip: enable USB OHCI host for RockPro64

[Kever Yang]

On 2020/5/29 下午6:01, Kever Yang wrote:
>
> On 2020/5/25 下午10:44, Marcin Juszkiewicz wrote:
>> U-Boot has video output enabled so time to get keyboard working.
>>
>> => usb reset;usb tree
>> resetting USB...
>> Bus usb at fe380000: USB EHCI 1.00
>> Bus usb at fe3a0000: USB OHCI 1.0
>> Bus usb at fe3c0000: USB EHCI 1.00
>> Bus usb at fe3e0000: USB OHCI 1.0
>> Bus dwc3: usb maximum-speed not found
>> Register 2000140 NbrPorts 2
>> Starting the controller
>> USB XHCI 1.10
>> scanning bus usb at fe380000 for devices... 1 USB Device(s) found
>> scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
>> scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
>> scanning bus usb at fe3e0000 for devices... 3 USB Device(s) found
>> scanning bus dwc3 for devices... cannot reset port 1!?
>> 2 USB Device(s) found
>>         scanning usb for storage devices... 2 Storage Device(s) found
>> USB device tree:
>>    1  Hub (480 Mb/s, 0mA)
>>       u-boot EHCI Host Controller
>>
>>    1  Hub (12 Mb/s, 0mA)
>>        U-Boot Root Hub
>>
>>    1  Hub (480 Mb/s, 0mA)
>>       u-boot EHCI Host Controller
>>
>>    1  Hub (12 Mb/s, 0mA)
>>    |   U-Boot Root Hub
>>    |
>>    +-2  Hub (12 Mb/s, 100mA)
>>      |  ALCOR Generic USB Hub
>>      |
>>      +-3  Mass Storage (12 Mb/s, 200mA)
>>           Kingston DT 101 G2 001478544887BB3157380157
>>
>>    1  Hub (5 Gb/s, 0mA)
>>    |  U-Boot XHCI Host Controller
>>    |
>>    +-2  Mass Storage (5 Gb/s, 76mA)
>>         ADATA ADATA USB Flash Drive 1520405012240002
>>
>> Signed-off-by: Marcin Juszkiewicz <marcin at juszkiewicz.com.pl>
>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Applied to u-boot-rockchip master.

Thanks,
- Kever