June 2020 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jun 1 00:26:32 CEST 2020
Ending: Tue Jun 30 23:35:07 CEST 2020
Messages: 3841

• [ANN] U-Boot v2020.07-rc3 released   Tom Rini
• [ANN] U-Boot v2020.07-rc4 released   Tom Rini
• [ANN] U-Boot v2020.07-rc4 released   Mark Kettenis
• [ANN] U-Boot v2020.07-rc4 released   Tom Rini
• [ANN] U-Boot v2020.07-rc5 released   Tom Rini
• [BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y   Heinrich Schuchardt
• [BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y   AKASHI Takahiro
• [BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y   Heinrich Schuchardt
• [BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y   AKASHI Takahiro
• [BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y   Heiko Stübner
• [BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y   Heinrich Schuchardt
• [BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y   Heiko Stübner
• [EXT] [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address   Ye Li
• [EXT] [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address   Sébastien Szymanski
• [EXT] [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address   Ye Li
• [EXT] [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Ye Li
• [EXT] [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Tom Rini
• [EXT] [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Tom Rini
• [EXT] [PATCH v2 1/1] imx: rom api: fix image offset computation   Ye Li
• [EXT] [PATCH v2 1/1] imx: rom api: fix image offset computation   Sébastien Szymanski
• [EXT] [PATCH v2 1/1] imx: rom api: fix image offset computation   Stefano Babic
• [EXT] Re: [PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Ye Li
• [EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Kuldeep Singh
• [EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Priyanka Jain
• [EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Tom Rini
• [EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Kuldeep Singh
• [EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Priyanka Jain
• [External] Re: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Brandon Maier
• [External] Re: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Michal Simek
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200609   Stefano Babic
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200609   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200623   Stefano Babic
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200623   Tom Rini
• [GIT PULL] rpi: second round for v2020.07   Matthias Brugger
• [GIT PULL] rpi: second round for v2020.07   Matthias Brugger
• [GIT PULL] rpi: second round for v2020.07   Matthias Brugger
• [GIT PULL] rpi: second round for v2020.07   Tom Rini
• [GIT PULL] TI changes for v2020.10 next   Lokesh Vutla
• [GIT PULL] TI changes for v2020.10 next   Tom Rini
• [GIT PULL] TI changes for v2020.10 next   Lokesh Vutla
• [GIT PULL] TI changes for v2020.10 next   Tom Rini
• [GIT PULL] TI changes for v2020.10 next   Tom Rini
• [GIT PULL] Uboot socfpga   Tan, Ley Foon
• [GIT PULL] Uboot socfpga   Tom Rini
• [GIT PULL] Xilinx patches for v2020.10   Michal Simek
• [GIT PULL] Xilinx patches for v2020.10   Tom Rini
• [linux-sunxi] Re: [RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40   Icenowy Zheng
• [linux-sunxi] Re: [RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40   André Przywara
• [PATCH 0/2] Add support for multiple required keys   Thirupathaiah Annapureddy
• [PATCH 0/2] arm: mvebu: a38x: USB2 serdes changes   Chris Packham
• [PATCH 0/2] board: amlogic: move boards doc into doc/board/amlogic   Neil Armstrong
• [PATCH 0/2] efi_loader: fix secure boot variables   Heinrich Schuchardt
• [PATCH 0/2] omap4: panda: convert to device model   Tero Kristo
• [PATCH 0/2] omap4: panda: convert to device model   Jonathan Gray
• [PATCH 0/2] omap4: panda: convert to device model   Lokesh Vutla
• [PATCH 0/2] omap4: panda: convert to device model   Tero Kristo
• [PATCH 0/2] omap4: panda: convert to device model   Vignesh Raghavendra
• [PATCH 0/2] omap4: panda: convert to device model   Tero Kristo
• [PATCH 0/2] omap4: panda: convert to device model   Tom Rini
• [PATCH 0/2] omap4: panda: convert to device model   Tero Kristo
• [PATCH 0/2] omap4: panda: convert to device model   Adam Ford
• [PATCH 0/2] omap4: panda: convert to device model   Tom Rini
• [PATCH 0/2] omap4: sdp: convert to device model   Peter Ujfalusi
• [PATCH 0/2] omap4: sdp: convert to device model   Peter Ujfalusi
• [PATCH 0/2] omap5 uevm: convert to device model   Tero Kristo
• [PATCH 0/2] u-boot support for ODROID-C4   Anand Moon
• [PATCH 0/2] u-boot support for ODROID-C4   Neil Armstrong
• [PATCH 0/2] u-boot support for ODROID-C4   Anand Moon
• [PATCH 0/2] v2: rr3188: change APP to 600MHz and enable bwadj for DPLL   Alexander Kochetkov
• [PATCH 0/3] AM654/J721e: Sync UDMA bindings   Vignesh Raghavendra
• [PATCH 0/3] AM654/J721e: Sync UDMA bindings   Grygorii Strashko
• [PATCH 0/3] Assorted fixes related to reserved memory   Atish Patra
• [PATCH 0/3] doc: rockchip: Improve documentation   Kever Yang
• [PATCH 0/3] rockchip: Add Radxa Rock Pi N8 support   Jagan Teki
• [PATCH 0/3] Support for specifying extra IOMMU mappings for PCI   laurentiu.tudor at nxp.com
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Rasmus Villemoes
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Stefan Roese
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Rasmus Villemoes
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Rasmus Villemoes
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Stefan Roese
• [PATCH 0/3] watchdog: K3: Add RTI watchdog support   Jan Kiszka
• [PATCH 0/4] arm: fix clang build errors   Heinrich Schuchardt
• [PATCH 0/4] arm: fix clang build errors   Tom Rini
• [PATCH 0/4] Convert LaCie boards to use DM drivers   Simon Guinot
• [PATCH 0/4] crypto/fsl: add RNG support   Michael Walle
• [PATCH 0/4] Move eSDHC adapter card code to board files   Yangbo Lu
• [PATCH 0/4] rockchip: rk3399pro: Add Add Rock Pi N10 support   Jagan Teki
• [PATCH 0/4] Some reserved memory hardenings   Tero Kristo
• [PATCH 0/5] Add Basic support for R8A774A1 (RZ/G2M)   Adam Ford
• [PATCH 0/5] add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH 0/5] Fixes for running U-boot under QEMU/KVM   Ard Biesheuvel
• [PATCH 0/5] fpga: zynqpl: Add support for AES engine   Michal Simek
• [PATCH 0/5] patman: Add tests for U-Boot-specific checkpatch checks   Simon Glass
• [PATCH 0/5] xilinx: DT/Kconfig changes   Michal Simek
• [PATCH 0/6] Add Qemu tests for MIPS Malta machine   Daniel Schwierzeck
• [PATCH 0/6] Add support MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH 0/6] mmc_spi: mmc erase resolve   Pragnesh Patel
• [PATCH 0/6] revive Theobroma-Systems puma board   Heiko Stuebner
• [PATCH 0/6] revive Theobroma-Systems puma board   Kever Yang
• [PATCH 0/7] Add support for CONFIG_API on RISC-V   Mitchell Horne
• [PATCH 0/7] arm: Juno board updates and PCIe/SATA enablement   Andre Przywara
• [PATCH 0/8] efi_loader: secure boot: support intermediate certificates in signature   AKASHI Takahiro
• [PATCH 0/8] Introduce UCLASS_SOC   Dave Gerlach
• [PATCH 00/15] rockchip: Support building ROM files automatically   Simon Glass
• [PATCH 00/16] spi: dm-conversion (part3)   Jagan Teki
• [PATCH 00/16] spi: dm-conversion (part3)   Tom Rini
• [PATCH 00/30] Finish some Kconfig migrations   Tom Rini
• [PATCH 01/10] dtoc: add support to scan drivers   Simon Glass
• [PATCH 01/10] dtoc: add support to scan drivers   Walter Lozano
• [PATCH 01/10] dtoc: add support to scan drivers   Walter Lozano
• [PATCH 01/10] dtoc: add support to scan drivers   Simon Glass
• [PATCH 01/10] dtoc: add support to scan drivers   Simon Glass
• [PATCH 01/10] dtoc: add support to scan drivers   Walter Lozano
• [PATCH 01/10] dtoc: add support to scan drivers   Simon Glass
• [PATCH 01/10] dtoc: add support to scan drivers   Walter Lozano
• [PATCH 01/10] dtoc: add support to scan drivers   Simon Glass
• [PATCH 01/10] dtoc: add support to scan drivers   Walter Lozano
• [PATCH 01/10] dtoc: add support to scan drivers   Simon Glass
• [PATCH 01/10] net: rtl8139: Factor out device name assignment   Tom Rini
• [PATCH 01/13] net: fsl_pq_mdio: Add the compatible "fsl, gianfar-mdio" support   Priyanka Jain (OSS)
• [PATCH 01/13] net: fsl_pq_mdio: Add the compatible "fsl, gianfar-mdio" support   Z.q. Hou
• [PATCH 01/15] dm: core Fix long line in device_bind_common()   Simon Glass
• [PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t   Daniel Schwierzeck
• [PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t   Marek Vasut
• [PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t   Daniel Schwierzeck
• [PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t   Marek Vasut
• [PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t   Daniel Schwierzeck
• [PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t   Marek Vasut
• [PATCH 01/16] cl-som-imx7: Switch to DM_SPI/DM_SPI_FLASH   Jagan Teki
• [PATCH 01/22] x86: mp_init: Switch to livetree   Wolfgang Wallner
• [PATCH 01/30] Convert CONFIG_AM335X_LCD to Kconfig   Tom Rini
• [PATCH 02/10] dtoc: add option to disable warnings   Simon Glass
• [PATCH 02/10] dtoc: add option to disable warnings   Walter Lozano
• [PATCH 02/10] net: rtl8139: Switch from malloc()+memset() to calloc()   Tom Rini
• [PATCH 02/13] efi_loader: image_loader: add a check against certificate type of authenticode   AKASHI Takahiro
• [PATCH 02/15] .gitignore: Ignore Python 3 cache directories   Simon Glass
• [PATCH 02/16] cm_fx6: Switch to full DM-aware   Jagan Teki
• [PATCH 02/22] x86: Move MP code into mp_init   Wolfgang Wallner
• [PATCH 02/30] Convert CONFIG_ARCH_MISC_INIT to Kconfig   Tom Rini
• [PATCH 03/10] dm: doc: update of-plat with the suppor for driver aliases   Simon Glass
• [PATCH 03/10] net: rtl8139: Use dev->iobase instead of custom ioaddr   Tom Rini
• [PATCH 03/15] binman: cbfs: Fix IFWI typo   Simon Glass
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Jagan Teki
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Ludwig Zenz
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Tom Rini
• AW: [PATCH 03/16] dh_imx6: Switch to full DM-aware   Ludwig Zenz
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Tom Rini
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Simon Glass
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Ludwig Zenz
• [PATCH 03/16] dh_imx6: Switch to full DM-aware   Tom Rini
• [PATCH 03/22] x86: mp_init: Avoid declarations in header files   Wolfgang Wallner
• [PATCH 03/30] Convert CONFIG_ARM_PL180_MMCI to Kconfig   Tom Rini
• [PATCH 04/10] core: drop const for struct driver_info   Simon Glass
• [PATCH 04/10] net: rtl8139: Clean up bus_to_phys()/phys_to_bus() macros   Tom Rini
• [PATCH 04/15] binman: Correct the search patch for pylibfdt   Simon Glass
• [PATCH 04/16] arm: Remove mx51evk board   Jagan Teki
• [PATCH 04/22] x86: mp_init: Switch parameter names in start_aps()   Wolfgang Wallner
• [PATCH 04/30] Convert CONFIG_ARMV7_PSCI et al to Kconfig   Tom Rini
• [PATCH 05/10] core: extend struct driver_info to point to device   Simon Glass
• [PATCH 05/10] core: extend struct driver_info to point to device   Walter Lozano
• [PATCH 05/10] net: rtl8139: Introduce device private data   Tom Rini
• [PATCH 05/13] efi_loader: signature: make efi_hash_regions more generic   AKASHI Takahiro
• [PATCH 05/15] binman: Add support for calling mkimage   Simon Glass
• [PATCH 05/16] arm: Remove ts4800 board   Jagan Teki
• [PATCH 05/22] x86: mp_init: Drop the num_cpus static variable   Wolfgang Wallner
• [PATCH 05/30] Convert CONFIG_AT91_GPIO to Kconfig   Tom Rini
• [PATCH 06/10] dtoc: extend dtoc to use struct driver_info when linking nodes   Simon Glass
• [PATCH 06/10] net: rtl8139: Pass private data into rtl8139_eeprom_delay()   Tom Rini
• [PATCH 06/13] efi_loader: image_loader: verification for all signatures should pass   AKASHI Takahiro
• [PATCH 06/15] binman: Fix a few typos in the entry docs   Simon Glass
• [PATCH 06/16] arm: Remove tqma6s_wru4_mmc_defconfig   Jagan Teki
• [PATCH 06/22] x86: mtrr: Fix 'ensable' typo   Wolfgang Wallner
• [PATCH 06/30] Convert CONFIG_ATMEL_HLCD to Kconfig   Tom Rini
• [PATCH 07/10] dm: doc: update of-plat with new phandle support   Simon Glass
• [PATCH 07/10] dm: doc: update of-plat with new phandle support   Walter Lozano
• [PATCH 07/10] net: rtl8139: Split out common and non-DM functions   Tom Rini
• [PATCH 07/13] efi_loader: image_loader: add digest-based verification for signed image   AKASHI Takahiro
• [PATCH 07/15] binman: Adjust pylibfdt for incremental build   Simon Glass
• [PATCH 07/16] arm: Remove pfla02 board   Jagan Teki
• [PATCH 07/22] x86: mp_init: Set up the CPU numbers at the start   Wolfgang Wallner
• [PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board   Priyanka Jain
• [PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board   Tom Rini
• [PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board   Priyanka Jain (OSS)
• [PATCH 07/30] Convert CONFIG_ATMEL_NAND_HW_PMECC et al to Kconfig   Tom Rini
• [PATCH 08/10] dtoc: update tests to match new platdata   Simon Glass
• [PATCH 08/10] net: rtl8139: Use PCI_DEVICE() to define PCI device compat list   Tom Rini
• [PATCH 08/13] test/py: efi_secboot: remove all "re.search"   AKASHI Takahiro
• [PATCH 08/13] test/py: efi_secboot: remove all "re.search"   Heinrich Schuchardt
• [PATCH 08/15] x86: rockchip: Change how selection of ROMs works   Simon Glass
• [PATCH 08/16] arm: Remove pcm058 board   Jagan Teki
• [PATCH 08/22] x86: mp_init: Adjust bsp_init() to return more information   Wolfgang Wallner
• [PATCH 08/30] Convert CONFIG_ATMEL_USART to Kconfig   Tom Rini
• [PATCH 09/10] dtoc: update dtb_platdata to support cd-gpios   Simon Glass
• [PATCH 09/10] dtoc: update dtb_platdata to support cd-gpios   Walter Lozano
• [PATCH 09/10] dtoc: update dtb_platdata to support cd-gpios   Simon Glass
• [PATCH 09/10] net: rtl8139: Read HW address from EEPROM only on probe   Tom Rini
• [PATCH 09/15] rockchip: Allow Bob to use SPI boot   Simon Glass
• [PATCH 09/16] arm: Remove riotboard board   Jagan Teki
• [PATCH 09/22] x86: cpu: Remove unnecessary #ifdefs   Wolfgang Wallner
• [PATCH 09/30] bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to Kconfig   Tom Rini
• [PATCH 1/1] ARM: mx6: make CAAM usable on the i.MX6 boards   Heinrich Schuchardt
• [PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Maxime Ripard
• [PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   André Przywara
• [PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH 1/1] arm: wandboard: move CONFIG_MXC_UART to defconfig   Heinrich Schuchardt
• [PATCH 1/1] arm: wandboard: move CONFIG_MXC_UART to defconfig   Fabio Estevam
• [PATCH 1/1] arm: wandboard: move CONFIG_MXC_UART to defconfig   sbabic at denx.de
• [PATCH 1/1] clk: ccf: mux: change the get_rate helper   Dario Binacchi
• [PATCH 1/1] cmd: fdt: remove CMD_FDT_MAX_DUMP   Heinrich Schuchardt
• [PATCH 1/1] cmd: fdt: remove CMD_FDT_MAX_DUMP   Simon Glass
• [PATCH 1/1] config: qemu: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH 1/1] config: qemu: increase SYS_MALLOC_F_LEN   Tom Rini
• [PATCH 1/1] config: remove CONFIG_ARMV8_SWITCH_TO_EL1 from whitelist.txt   Heinrich Schuchardt
• [PATCH 1/1] config: remove CONFIG_ARMV8_SWITCH_TO_EL1 from whitelist.txt   Tom Rini
• [PATCH 1/1] crypto/fsl: correct printf() statement.   Heinrich Schuchardt
• [PATCH 1/1] crypto/fsl: unused value in caam_hash_update()   Heinrich Schuchardt
• [PATCH 1/1] crypto/fsl: unused value in caam_hash_update()   Simon Glass
• [PATCH 1/1] doc: Coccinelle: move to HTML doc   Heinrich Schuchardt
• [PATCH 1/1] doc: driver-model: there is no UCLASS_SATA   sjg at google.com
• [PATCH 1/1] doc: move Clang documentation to HTML   Heinrich Schuchardt
• [PATCH 1/1] doc: move README.log to HTML documentation   sjg at google.com
• [PATCH 1/1] doc: random number generation   Heinrich Schuchardt
• [PATCH 1/1] doc: random number generation   Simon Glass
• [PATCH 1/1] doc: random number generation   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: add libguestfs-tools package   Tom Rini
• [PATCH 1/1] Dockerfile: add libguestfs-tools package   AKASHI Takahiro
• [PATCH 1/1] Dockerfile: add libguestfs-tools package   Tom Rini
• [PATCH 1/1] Dockerfile: add libguestfs-tools package   Tom Rini
• [PATCH 1/1] Dockerfile: add missing package efitools   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: add missing package efitools   Tom Rini
• [PATCH 1/1] efi_loader: comments EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix incorrect use of EFI_EXIT()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: incorrect check against FDT_ADDR_T_NONE   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: prepare for read only OP-TEE variables   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: prepare for read only OP-TEE variables   Ilias Apalodimas
• [PATCH 1/1] efi_loader: prepare for read only OP-TEE variables   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: printf code in efi_image_parse()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: rtc_mktime() called twice   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: validate load option   AKASHI Takahiro
• [PATCH 1/1] fastboot: add support for 'reboot fastboot' command   Roman Kovalivskyi
• [PATCH 1/1] fastboot: add support for 'reboot fastboot' command   Alex Kiernan
• [PATCH 1/1] fs: error handling in do_load()   Heinrich Schuchardt
• [PATCH 1/1] fs: error handling in do_load()   Simon Glass
• [PATCH 1/1] gitlab: show skipped Python tests   Heinrich Schuchardt
• [PATCH 1/1] gitlab: show skipped Python tests   Simon Glass
• [PATCH 1/1] gitlab: show skipped Python tests   Heinrich Schuchardt
• [PATCH 1/1] gitlab: show skipped Python tests   Simon Glass
• [PATCH 1/1] gitlab: show skipped Python tests   Tom Rini
• [PATCH 1/1] gitlab: show skipped Python tests   Stephen Warren
• [PATCH 1/1] gitlab: show skipped Python tests   Heinrich Schuchardt
• [PATCH 1/1] gitlab: show skipped Python tests   Tom Rini
• [PATCH 1/1] gitlab: show skipped Python tests   Simon Glass
• [PATCH 1/1] gitlab: show skipped Python tests   Heinrich Schuchardt
• [PATCH 1/1] gitlab: show skipped Python tests   Simon Glass
• [PATCH 1/1] gitlab: show skipped Python tests   Heinrich Schuchardt
• [PATCH 1/1] gitlab: show skipped Python tests   Tom Rini
• [PATCH 1/1] gitlab: show skipped Python tests   Simon Glass
• [PATCH 1/1] gitlab: show skipped Python tests   Tom Rini
• [PATCH 1/1] gitlab: show skipped Python tests   Simon Glass
• [PATCH 1/1] include/configs: ls1012a: Remove fdt_high env variable   udit.agarwal at nxp.com
• [PATCH 1/1] log: check argument of 'log level' command   sjg at google.com
• [PATCH 1/1] log: clean up Kconfig   sjg at google.com
• [PATCH 1/1] log: uclass_get_name() depends on CONFIG_SPL_DM   Heinrich Schuchardt
• [PATCH 1/1] log: uclass_get_name() depends on CONFIG_SPL_DM   Simon Glass
• [PATCH 1/1] ls1021a: Add DDR errata num 008109   jaiprakash.singh at nxp.com
• [PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq()   Heinrich Schuchardt
• [PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq()   Heinrich Schuchardt
• [PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq()   Stefan Roese
• [PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq()   Heinrich Schuchardt
• [PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq()   Stefan Roese
• [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address   Sébastien Szymanski
• [PATCH 1/1] riscv: Fix linking error when building u-boot-spl with no SMP support   Leo Yu-Chi Liang
• [PATCH 1/1] riscv: use log functions in fdt_fixup   Heinrich Schuchardt
• [PATCH 1/1] riscv: use log functions in fdt_fixup   Bin Meng
• [PATCH 1/1] riscv: use log functions in fdt_fixup   Rick Chen
• [PATCH 1/1] sandbox: handling out of memory   Heinrich Schuchardt
• [PATCH 1/1] sandbox: handling out of memory   Simon Glass
• [PATCH 1/1] sandbox: handling out of memory   Heinrich Schuchardt
• [PATCH 1/1] sandbox: handling out of memory   Heinrich Schuchardt
• [PATCH 1/1] sandbox: make RAM size configurable   Heinrich Schuchardt
• [PATCH 1/1] sandbox: make RAM size configurable   Simon Glass
• [PATCH 1/1] sandbox: spi: sandbox_sf_state_name() is required   Heinrich Schuchardt
• [PATCH 1/1] sandbox: spi: sandbox_sf_state_name() is required   Simon Glass
• [PATCH 1/1] smbios: empty strings in smbios_add_string()   Heinrich Schuchardt
• [PATCH 1/1] smbios: empty strings in smbios_add_string()   Simon Glass
• [PATCH 1/1] spl: fix ext4fs_mount return code handling   Heiko Thiery
• [PATCH 1/1] spl: fix ext4fs_mount return code handling   Heiko Thiery
• [PATCH 1/1] spl: fix ext4fs_mount return code handling   Tom Rini
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Tom Rini
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Heinrich Schuchardt
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Tom Rini
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   André Przywara
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Heinrich Schuchardt
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   André Przywara
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Heinrich Schuchardt
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Heinrich Schuchardt
• [PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties   Heinrich Schuchardt
• [PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties   André Przywara
• [PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties   Heinrich Schuchardt
• [PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties   Heinrich Schuchardt
• [PATCH 1/1] test/py: use actual core count for parallel builds   Tom Rini
• [PATCH 1/1] virtio: VIRTIO_RNG depends on DM_RNG   Bin Meng
• [PATCH 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default   Gregory CLEMENT
• [PATCH 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default   Eugen.Hristev at microchip.com
• [PATCH 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default   Gregory CLEMENT
• [PATCH 1/2] ARM: dts: sama5d4: fix gadget endpoint address warning   Eugen Hristev
• [PATCH 1/2] ARM: dts: sama5d4: fix gadget endpoint address warning   Eugen.Hristev at microchip.com
• [PATCH 1/2] ARM: imx: m53menlo: Do not fail boot on invalid splash screen   sbabic at denx.de
• [PATCH 1/2] arm: mvebu: a38x: Fix typo   Chris Packham
• [PATCH 1/2] arm: mvebu: a38x: Fix typo   Stefan Roese
• [PATCH 1/2] armv8: dts: fsl-lx2160a: add flash node under dspi to qds dts   Qiang Zhao
• [PATCH 1/2] armv8: dts: fsl-lx2160a: add flash node under dspi to qds dts   Qiang Zhao
• [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic   Neil Armstrong
• [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic   Heinrich Schuchardt
• [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic   Neil Armstrong
• [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic   Anand Moon
• [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic   Neil Armstrong
• [PATCH 1/2] board: stm32mp1: fix handling of DT OP-TEE reserved memory nodes   Patrick Delaunay
• [PATCH 1/2] board: stm32mp1: fix handling of DT OP-TEE reserved memory nodes   Patrice CHOTARD
• [PATCH 1/2] board: stm32mp1: fix handling of DT OP-TEE reserved memory nodes   Patrick DELAUNAY
• [PATCH 1/2] board: ti: am57xx: use GPIO_TO_PIN() to define GPIO number   Lokesh Vutla
• [PATCH 1/2] cmd: booti: Fix spelling of "environment".   Vagrant Cascadian
• [PATCH 1/2] cmd: booti: Fix spelling of "environment".   Simon Glass
• [PATCH 1/2] cmd: booti: Fix spelling of "environment".   Tom Rini
• [PATCH 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrick Delaunay
• [PATCH 1/2] efi_loader: type of efi_secure_mode   Heinrich Schuchardt
• [PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees   Jon Hunter
• [PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees   Peter Robinson
• [PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees   Jon Hunter
• [PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees   Tom Warren
• [PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees   Tom Rini
• [PATCH 1/2] gpio: mxc_gpio: change gpio index for i.MX8   Ye Li
• [PATCH 1/2] gpio: mxc_gpio: change gpio index for i.MX8   sbabic at denx.de
• [PATCH 1/2] mmc: fsl_esdhc_imx: fix the mask for tuning start point   haibo.chen at nxp.com
• [PATCH 1/2] mtd: nand: raw: denali: Assert reset before deassert   Ley Foon Tan
• [PATCH 1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support   Otavio Salvador
• [PATCH 1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support   Fabio Estevam
• [PATCH 1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support   sbabic at denx.de
• [PATCH 1/2] net: phy: mscc: make clock-output configurable on vsc85xx   Heiko Stuebner
• [PATCH 1/2] net: phy: mscc: make clock-output configurable on vsc85xx   Philipp Tomsich
• [PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot   Tom Rini
• [PATCH 1/2] omap4: Copy device tree from Linux 5.7.y   Tero Kristo
• [PATCH 1/2] omap4: Copy device tree from Linux 5.7.y for SDP4430   Peter Ujfalusi
• [PATCH 1/2] omap5: Copy device tree from linux 5.7.y   Tero Kristo
• [PATCH 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay   Tom Rini
• [PATCH 1/2] riscv: fu540: dts: Remove the unnecessary space in the cpu2_intc node   Bin Meng
• [PATCH 1/2] riscv: fu540: dts: Remove the unnecessary space in the cpu2_intc node   Pragnesh Patel
• [PATCH 1/2] riscv: sbi: Remove sbi_spec_version   Rick Chen
• [PATCH 1/2] riscv: sbi: Remove sbi_spec_version   Bin Meng
• [PATCH 1/2] riscv: sbi: Remove sbi_spec_version   Rick Chen
• [PATCH 1/2] riscv: sbi: Remove sbi_spec_version   Bin Meng
• [PATCH 1/2] riscv: sbi: Remove sbi_spec_version   Rick Chen
• [PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size   Atish Patra
• [PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size   Bin Meng
• [PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size   Atish Patra
• [PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size   Bin Meng
• [PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size   Atish Patra
• [PATCH 1/2] rock-pi-4: Enable USB Gadget   Jagan Teki
• [PATCH 1/2] rockchip: clk: rk3188: change APLL to safe 600MHz   Alexander Kochetkov
• [PATCH 1/2] rockchip: clk: rk3188: change APLL to safe 600MHz   Kever Yang
• [PATCH 1/2] rockchip: rockpro64: Store default env into SPI   Marcin Juszkiewicz
• [PATCH 1/2] rockchip: rockpro64: Store default env into SPI   Kever Yang
• [PATCH 1/2] spi: fsl_qspi: Add support for i.MX7ULP   Ye Li
• [PATCH 1/2] spi: make spi-mem driver usable without CONFIG_DM_SPI, drop NODM variant   Mikhail Kshevetskiy
• [PATCH 1/2] test/py: efi_secboot: apply autopep8   AKASHI Takahiro
• [PATCH 1/2] usb: ohci: Add header file for ARCH_DMA_MINALIGN   Tom Rini
• [PATCH 1/2] vboot: add support for multiple required keys   Thirupathaiah Annapureddy
• [PATCH 1/2] vboot: add support for multiple required keys   Simon Glass
• [PATCH 1/2] vboot: add support for multiple required keys   Simon Glass
• [PATCH 1/2] vboot: add support for multiple required keys   Rasmus Villemoes
• [PATCH 1/3] ARM: dts: rockchip: radxa-dalang: Update sdmmc properties   Jagan Teki
• [PATCH 1/3] ARM: dts: rockchip: radxa-dalang: Update sdmmc properties   Kever Yang
• [PATCH 1/3] dma: ti: Add static PSIL endpoint information   Vignesh Raghavendra
• [PATCH 1/3] kconfig: mark SPL/TPL options for DM_KEYBOARD   Tom Rini
• [PATCH 1/3] misc: scu_api: Add SCFW API to get the index of boot container set   Ye Li
• [PATCH 1/3] mx6slevk_spinor: Convert to DM_ETH   Fabio Estevam
• [PATCH 1/3] mx6slevk_spinor: Convert to DM_ETH   sbabic at denx.de
• [PATCH 1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support   Otavio Salvador
• [PATCH 1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support   Fabio Estevam
• [PATCH 1/3] net: sun8i_emac: Use consistent clock bitfield definitions   Jagan Teki
• [PATCH 1/3] pci: layerscape: move per-pci device fdt fixup in a function   laurentiu.tudor at nxp.com
• [PATCH 1/3] pinctrl: bcm283x: DM_FLAG_PRE_RELOC: Remove OF_CONTROL check   Ovidiu Panait
• [PATCH 1/3] riscv: Do not return error if reserved node already exists   Atish Patra
• [PATCH 1/3] riscv: Do not return error if reserved node already exists   Bin Meng
• [PATCH 1/3] riscv: Do not return error if reserved node already exists   Atish Patra
• [PATCH 1/3] riscv: Do not return error if reserved node already exists   Bin Meng
• [PATCH 1/3] riscv: Do not return error if reserved node already exists   Atish Patra
• [PATCH 1/3] rock-pi-4: Enable USB3 Host   Jagan Teki
• [PATCH 1/3] rockchip: Pinebook Pro: enable rng to provide an entropy source   Peter Robinson
• [PATCH 1/3] rockchip: Pinebook Pro: enable rng to provide an entropy source   Marcin Juszkiewicz
• [PATCH 1/3] rockchip: Pinebook Pro: enable rng to provide an entropy source   Kever Yang
• [PATCH 1/3] spi: atmel: Drop CONFIG_SYS_SPI_WRITE_TOUT   Jagan Teki
• [PATCH 1/3] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Jagan Teki
• [PATCH 1/3] treewide: convert bd_t to struct bd_info by coccinelle   Masahiro Yamada
• [PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer   Igor Opaniuk
• [PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer   Anatolij Gustschin
• [PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer   Anatolij Gustschin
• [PATCH 1/3] watchdog: Add support for K3 RTI watchdog   Jan Kiszka
• [PATCH 1/3] Watchdog: introduce ARM SBSA watchdog driver   Biwen Li
• [PATCH 1/3] x86: baytrail: acpi: Create buffers outside of the methods   Bin Meng
• [PATCH 1/3] x86: baytrail: acpi: Create buffers outside of the methods   Bin Meng
• [PATCH 1/4] am335x: Update list of defconfigs   Tom Rini
• [PATCH 1/4] am335x: Update list of defconfigs   Tom Rini
• [PATCH 1/4] arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi   Jagan Teki
• [PATCH 1/4] arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi   Kever Yang
• [PATCH 1/4] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Simon Guinot
• [PATCH 1/4] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Tom Rini
• [PATCH 1/4] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Simon Guinot
• [PATCH 1/4] crypto/fsl: make SEC%u status line consistent   Michael Walle
• [PATCH 1/4] crypto/fsl: make SEC%u status line consistent   Horia Geantă
• [PATCH 1/4] crypto/fsl: make SEC%u status line consistent   Heinrich Schuchardt
• [PATCH 1/4] Drop global data sdhc_adapter for powerpc   Yangbo Lu
• [PATCH 1/4] Drop global data sdhc_adapter for powerpc   Peng Fan
• [PATCH 1/4] lmb/bdinfo: dump lmb info via bdinfo   Tero Kristo
• [PATCH 1/4] mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers   Mikhail Kshevetskiy
• [PATCH 1/4] net: dc2114x: Use PCI_DEVICE() to define PCI device compat list   Marek Vasut
• [PATCH 1/4] phy: atheros: ar8035: Fix clock output calculation   Fabio Estevam
• [PATCH 1/4] phy: atheros: ar8035: Fix clock output calculation   Tom Rini
• [PATCH 1/4] ram: stm32mp1: protect minimum value in get_bufsize   Patrick Delaunay
• [PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK   Ard Biesheuvel
• [PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK   Heinrich Schuchardt
• [PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK   Ard Biesheuvel
• [PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK   Heinrich Schuchardt
• [PATCH 1/5] ARM: renesas: Add basic R8A774A1 Support   Adam Ford
• [PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value   Ovidiu Panait
• [PATCH 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Shrikant Kadam
• [PATCH 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Bin Meng
• [PATCH 1/5] imx8mm_evk: Select the watchdog driver   sbabic at denx.de
• [PATCH 1/5] patman: Rename test.py to test_checkpatch.py   Simon Glass
• [PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property   Bin Meng
• [PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property   Simon Glass
• [PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property   Pragnesh Patel
• [PATCH 1/6] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin   Heiko Stuebner
• [PATCH 1/6] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin   Philipp Tomsich
• [PATCH 1/6] checkpatch.pl: Update to v5.7-rc6   Tom Rini
• [PATCH 1/6] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
• [PATCH 1/6] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Marek Vasut
• [PATCH 1/6] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Tom Rini
• [PATCH 1/6] mmc: mmc_spi: correct the while condition   Pragnesh Patel
• [PATCH 1/6] patman: Fix 'warning' typo   sjg at google.com
• [PATCH 1/6] tools: add script for byte endianness swapping   Daniel Schwierzeck
• [PATCH 1/6] Update MEM_SUPPORT_64BIT_DATA to be always defined   Simon Glass
• [PATCH 1/6] Update MEM_SUPPORT_64BIT_DATA to be always defined   Stefan Roese
• [PATCH 1/7] arm: vexpress64: Fix counter frequency   Andre Przywara
• [PATCH 1/7] arm: vexpress64: Fix counter frequency   Linus Walleij
• [PATCH 1/7] Revert "mmc: zynq: parse dt when probing"   Michal Simek
• [PATCH 1/7] Revert "mmc: zynq: parse dt when probing"   Jaehoon Chung
• [PATCH 1/7] sdp: call board_usb_init at spl_sdp_load_image   Peng Fan
• [PATCH 1/7] usb: ehci-mx6: Add powerup_fixup implementation   Peng Fan
• [PATCH 1/7] usb: ehci-mx6: Add powerup_fixup implementation   Marek Vasut
• [PATCH 1/8] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching   Dave Gerlach
• [PATCH 1/8] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching   Tom Rini
• [PATCH 1/8] imx: convert embest boards to DM_VIDEO   Anatolij Gustschin
• [PATCH 1/8] lib: rsa: export rsa_verify_with_pkey()   AKASHI Takahiro
• [PATCH 1/8] pfla02: Rework excluding NAND from SPL   Tom Rini
• [PATCH 10/10] dtoc add test for cd-gpios   Simon Glass
• [PATCH 10/10] net: rtl8139: Add DM support   Tom Rini
• [PATCH 10/15] Allow building .rom files for non-x86 boards   Simon Glass
• [PATCH 10/16] arm: Remove zc5202/zc5601 board   Jagan Teki
• [PATCH 10/22] x86: mp: Support APs waiting for instructions   Wolfgang Wallner
• [PATCH 10/30] Convert CONFIG_BAUDRATE to Kconfig   Tom Rini
• [PATCH 11/15] rockchip: jerry: Add serial support   Simon Glass
• [PATCH 11/16] arm: Remove cgtqmx6eval board   Jagan Teki
• [PATCH 11/22] global_data: Add a generic global_data flag for SMP state   Wolfgang Wallner
• [PATCH 11/30] Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig   Tom Rini
• [PATCH 12/15] rockchip: bob: Support SPI-flash booting   Simon Glass
• [PATCH 12/16] arm: Remove ot1200 board   Jagan Teki
• [PATCH 12/22] x86: Set the SMP flag when MP init is complete   Wolfgang Wallner
• [PATCH 12/30] Convert CONFIG_BOOTARGS to Kconfig   Tom Rini
• [PATCH 13/15] rockchip: Allow including rockchip dtsi on 32-bit machines   Simon Glass
• [PATCH 13/16] arm: Remove dms-ba16 board   Jagan Teki
• [PATCH 13/22] x86: mp: Allow running functions on multiple CPUs   Wolfgang Wallner
• [PATCH 13/30] Convert CONFIG_BCH to Kconfig   Tom Rini
• [PATCH 14/15] rockchip: Enable building a SPI ROM image on jerry   Simon Glass
• [PATCH 14/16] arm: Remove configs/mx35pdk_defconfig board   Jagan Teki
• [PATCH 14/22] x86: mp: Park CPUs before running the OS   Wolfgang Wallner
• [PATCH 14/30] Convert CONFIG_BOARD_TYPES to Kconfig   Tom Rini
• [PATCH 15/15] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• [PATCH 15/16] arm: Remove flea3_defconfig board   Jagan Teki
• [PATCH 15/22] x86: mp: Add iterators for CPUs   Wolfgang Wallner
• [PATCH 15/30] arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to Kconfig   Tom Rini
• [PATCH 16/16] arm: Remove mx31pdk_defconfig board   Jagan Teki
• [PATCH 16/22] x86: mtrr: Use MP calls to list the MTRRs   Wolfgang Wallner
• [PATCH 16/30] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig   Tom Rini
• [PATCH 16/30] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig   Holger Brunck
• [PATCH 17/22] x86: mtrr: Update MTRRs on all CPUs   Wolfgang Wallner
• [PATCH 17/30] Convert CONFIG_BOOTP_DNS2 to Kconfig   Tom Rini
• [PATCH 18/22] x86: mtrr: Add support for writing to MTRRs on any CPU   Wolfgang Wallner
• [PATCH 18/30] Convert CONFIG_BOUNCE_BUFFER to Kconfig   Tom Rini
• [PATCH 19/22] x86: mtrr: Update the command to use the new mtrr calls   Wolfgang Wallner
• [PATCH 19/30] Convert CONFIG_BUILD_TARGET to Kconfig   Tom Rini
• [PATCH 2/2] [RFC] clk: stm32mp1: Handle SoC speed grade configs   Marek Vasut
• [PATCH 2/2] arm: dts: imx: fsl-imx8qm.dtsi: fix gpio aliases   Ye Li
• [PATCH 2/2] arm: dts: imx: fsl-imx8qm.dtsi: fix gpio aliases   sbabic at denx.de
• [PATCH 2/2] ARM: dts: imx: m53menlo: Convert to DM_ETH   sbabic at denx.de
• [PATCH 2/2] ARM: dts: sama5d3: fix gadget endpoint address warning   Eugen Hristev
• [PATCH 2/2] arm: mvebu: a38x: Adjust UTMI PHY parameters   Chris Packham
• [PATCH 2/2] arm: mvebu: a38x: Adjust UTMI PHY parameters   Stefan Roese
• [PATCH 2/2] ARM: tegra: Enable PSCI support for Tegra210 and Tegra186   Jon Hunter
• [PATCH 2/2] ARM: tegra: Enable PSCI support for Tegra210 and Tegra186   Peter Robinson
• [PATCH 2/2] ARM: tegra: Enable PSCI support for Tegra210 and Tegra186   Stephen Warren
• [PATCH 2/2] board: amlogic: add board doc files to MAINTAINERS   Neil Armstrong
• [PATCH 2/2] config: lx2160/2a: enable dspi   Qiang Zhao
• [PATCH 2/2] dma-mapping: Add header file for ARCH_DMA_MINALIGN   Tom Rini
• [PATCH 2/2] doc: sifive: Fix spelling of "environment".   Vagrant Cascadian
• [PATCH 2/2] doc: sifive: Fix spelling of "environment".   Tom Rini
• [PATCH 2/2] dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSI   Patrick Delaunay
• [PATCH 2/2] dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSI   Patrick DELAUNAY
• [PATCH 2/2] efi_loader: size of secure boot variables   Heinrich Schuchardt
• [PATCH 2/2] hack to boot with 2020.01   Oliver Graute
• [PATCH 2/2] hack to boot with 2020.01   Tom Rini
• [PATCH 2/2] mmc: fsl_esdhc_imx: disable the CMD CRC check for standard tuning   haibo.chen at nxp.com
• [PATCH 2/2] mtd: make spinand driver usable without CONFIG_DM   Mikhail Kshevetskiy
• [PATCH 2/2] mtd: nand: raw: denali: Wait for reset completion status   Ley Foon Tan
• [PATCH 2/2] mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper   Otavio Salvador
• [PATCH 2/2] mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper   Fabio Estevam
• [PATCH 2/2] mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper   sbabic at denx.de
• [PATCH 2/2] net: phy: mscc: sync rx/tx delay settings with Linux on vsc85xx   Heiko Stuebner
• [PATCH 2/2] net: phy: mscc: sync rx/tx delay settings with Linux on vsc85xx   Philipp Tomsich
• [PATCH 2/2] omap4: panda: convert to device model   Tero Kristo
• [PATCH 2/2] omap4: panda: convert to device model   Jagan Teki
• [PATCH 2/2] omap4: sdp: convert to device model   Peter Ujfalusi
• [PATCH 2/2] omap4: sdp: convert to device model   Tom Rini
• [PATCH 2/2] omap4: sdp: convert to device model   Tero Kristo
• [PATCH 2/2] omap4: sdp: convert to device model   Tom Rini
• [PATCH 2/2] omap4: sdp: convert to device model   Peter Ujfalusi
• [PATCH 2/2] omap4: sdp: convert to device model   Tom Rini
• [PATCH 2/2] omap4: sdp: convert to device model   Peter Ujfalusi
• [PATCH 2/2] omap5: uevm: convert to device model   Tero Kristo
• [PATCH 2/2] riscv: Do not return error if reserved node already exists   Atish Patra
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Atish Patra
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Atish Patra
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: fu540: dts: Correct reg size of otp and dmc nodes   Bin Meng
• [PATCH 2/2] riscv: fu540: dts: Correct reg size of otp and dmc nodes   Pragnesh Patel
• [PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01   Rick Chen
• [PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01   Rick Chen
• [PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01   Bin Meng
• [PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01   Atish Patra
• [PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01   Rick Chen
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Bin Meng
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Rick Chen
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Pragnesh Patel
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Rick Chen
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Pragnesh Patel
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Bin Meng
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Rick Chen
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Bin Meng
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Pragnesh Patel
• [PATCH 2/2] rock-pi-4: Enable HDMI output   Jagan Teki
• [PATCH 2/2] rockchip: clk: rk3188: enable bwadj for rk3188 DPLL   Alexander Kochetkov
• [PATCH 2/2] rockchip: clk: rk3188: enable bwadj for rk3188 DPLL   Kever Yang
• [PATCH 2/2] rockchip: clk: rk3188: enable bwadj for rk3188 DPLL   Alexander Kochetkov
• [PATCH 2/2] rockchip: rockpro64: add SPI boot   Marcin Juszkiewicz
• [PATCH 2/2] rockchip: rockpro64: add SPI boot   Kever Yang
• [PATCH 2/2] spi: fsl_qspi: Support to use full AHB space on i.MX   Ye Li
• [PATCH 2/2] stm32mp1: use the command env info in env_check   Patrick Delaunay
• [PATCH 2/2] sun8i-emac: Added sun8i-v3s-emac example to sun8i-v3s.dtsi   Jagan Teki
• [PATCH 2/2] sun8i-emac: Added sun8i-v3s-emac example to sun8i-v3s.dtsi   Benedikt-Alexander Mokroß
• [PATCH 2/2] test/py: efi_secboot: more fixes against pylint   AKASHI Takahiro
• [PATCH 2/2] test: vboot: add a test for multiple required keys   Thirupathaiah Annapureddy
• [PATCH 2/3] arm64: lx2160a: dts: Add watchdog node   Biwen Li
• [PATCH 2/3] ARM: dts: rockchip: Add VMARC RK3288 SOM initial support   Jagan Teki
• [PATCH 2/3] ARM: dts: rockchip: Add VMARC RK3288 SOM initial support   Kever Yang
• [PATCH 2/3] dma: ti: k3-udma: Update driver to use static endpoint Data   Vignesh Raghavendra
• [PATCH 2/3] kconfig: fix some typos   Tom Rini
• [PATCH 2/3] mx6slevk_spl: Convert to DM_ETH   Fabio Estevam
• [PATCH 2/3] mx6slevk_spl: Convert to DM_ETH   sbabic at denx.de
• [PATCH 2/3] mx6ul_14x14_evk: Enable eMMC boot support   Otavio Salvador
• [PATCH 2/3] mx6ul_14x14_evk: Enable eMMC boot support   Fabio Estevam
• [PATCH 2/3] pci: layerscape: move pci node search in a common function   laurentiu.tudor at nxp.com
• [PATCH 2/3] pinctrl: bcm283x: Read address from DT in ofdata_to_platdata   Ovidiu Panait
• [PATCH 2/3] ram: rk3328: add support ddr4 init   Da Xue
• [PATCH 2/3] riscv: Use optimized version of fdtdec_get_addr_size_no_parent   Atish Patra
• [PATCH 2/3] riscv: Use optimized version of fdtdec_get_addr_size_no_parent   Bin Meng
• [PATCH 2/3] rock-pi-4: Enable PCI/NVME   Jagan Teki
• [PATCH 2/3] rockchip: Pinebook Pro: Fix USB and the USB attached keyboard   Peter Robinson
• [PATCH 2/3] rockchip: Pinebook Pro: Fix USB and the USB attached keyboard   Kever Yang
• [PATCH 2/3] spi: atmel: Remove nondm code   Jagan Teki
• [PATCH 2/3] spl: mmc: Move the eMMC boot part index to weak function   Ye Li
• [PATCH 2/3] treewide: convert bd_t to struct bd_info manually   Masahiro Yamada
• [PATCH 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH 2/3] x86: baytrail: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Bin Meng
• [PATCH 2/3] x86: baytrail: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Bin Meng
• [PATCH 2/4] arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM   Jagan Teki
• [PATCH 2/4] arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM   Kever Yang
• [PATCH 2/4] arm: kirkwood: switch LaCie boards to sata_mv driver   Simon Guinot
• [PATCH 2/4] crypto/fsl: export caam_get_era()   Michael Walle
• [PATCH 2/4] crypto/fsl: export caam_get_era()   Horia Geantă
• [PATCH 2/4] crypto/fsl: export caam_get_era()   Heinrich Schuchardt
• [PATCH 2/4] image: fdt: bail out with error if no boot time FDT image found   Tero Kristo
• [PATCH 2/4] Move eSDHC adapter card identification to board files   Yangbo Lu
• [PATCH 2/4] mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB   Mikhail Kshevetskiy
• [PATCH 2/4] net: dc2114x: Support all DC2114x   Marek Vasut
• [PATCH 2/4] net: fec: Allow the PHY node to be retrieved   Fabio Estevam
• [PATCH 2/4] net: fec: Allow the PHY node to be retrieved   Tom Rini
• [PATCH 2/4] omap3_beagle: Disable USB support   Tom Rini
• [PATCH 2/4] omap3_beagle: Disable USB support   Adam Ford
• [PATCH 2/4] omap3_beagle: Disable USB support   Tom Rini
• [PATCH 2/4] omap3_beagle: Disable USB support   Adam Ford
• [PATCH 2/4] omap3_beagle: Disable USB support   Tom Rini
• [PATCH 2/4] omap3_beagle: Disable USB support   Tom Rini
• [PATCH 2/4] ram: stm32mp1: add parameter addr in test FrequencySelectivePattern   Patrick Delaunay
• [PATCH 2/5] ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1   Adam Ford
• [PATCH 2/5] arm: qemu: enable LPAE on 32-bit   Ard Biesheuvel
• [PATCH 2/5] arm: qemu: enable LPAE on 32-bit   Heinrich Schuchardt
• [PATCH 2/5] arm: qemu: enable LPAE on 32-bit   Heinrich Schuchardt
• [PATCH 2/5] arm: qemu: enable LPAE on 32-bit   Ard Biesheuvel
• [PATCH 2/5] arm: qemu: enable LPAE on 32-bit   Heinrich Schuchardt
• [PATCH 2/5] arm: qemu: enable LPAE on 32-bit   Ard Biesheuvel
• [PATCH 2/5] fu540: prci: use common reset indexes defined in binding header   Sagar Shrikant Kadam
• [PATCH 2/5] fu540: prci: use common reset indexes defined in binding header   Bin Meng
• [PATCH 2/5] fu540: prci: use common reset indexes defined in binding header   Bin Meng
• [PATCH 2/5] fu540: prci: use common reset indexes defined in binding header   Sagar Kadam
• [PATCH 2/5] imx8mn_ddr4_evk: Select the watchdog driver   sbabic at denx.de
• [PATCH 2/5] patman: Add a test for the 'possible new uclass' check   Simon Glass
• [PATCH 2/5] sysreset: syscon: Support value property   Bin Meng
• [PATCH 2/5] sysreset: syscon: Support value property   Simon Glass
• [PATCH 2/5] sysreset: syscon: Support value property   Pragnesh Patel
• [PATCH 2/6] board: puma: fix indentation for -u-boot.dtsi   Heiko Stuebner
• [PATCH 2/6] board: puma: fix indentation for -u-boot.dtsi   Philipp Tomsich
• [PATCH 2/6] checkpatch.pl: Add a U-Boot option   Tom Rini
• [PATCH 2/6] cmd: mem: Use a macro to avoid #ifdef in help   Simon Glass
• [PATCH 2/6] cmd: mem: Use a macro to avoid #ifdef in help   Stefan Roese
• [PATCH 2/6] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
• [PATCH 2/6] env: Add H_DEFAULT flag   Marek Vasut
• [PATCH 2/6] env: Add H_DEFAULT flag   Tom Rini
• [PATCH 2/6] Makefile: add rule to generate u-boot-swap.bin   Daniel Schwierzeck
• [PATCH 2/6] mmc: mmc_spi: generate R1 response for different mmc SPI commands   Pragnesh Patel
• [PATCH 2/6] patman: Support emacs mode with checkpatch   sjg at google.com
• [PATCH 2/7] f_sdp: Add high speed endpoint descriptor   Peng Fan
• [PATCH 2/7] mmc: zynq_sdhci: Define timing macro's   Ashok Reddy Soma
• [PATCH 2/7] mmc: zynq_sdhci: Define timing macro's   Faiz Abbas
• [PATCH 2/7] mmc: zynq_sdhci: Define timing macro's   Jaehoon Chung
• [PATCH 2/7] mmc: zynq_sdhci: Define timing macro's   Ashok Reddy Soma
• [PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address   Andre Przywara
• [PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address   Ramon Fried
• [PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address   Linus Walleij
• [PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support   Peng Fan
• [PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support   Marek Vasut
• [PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support   Peng Fan
• [PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support   Marek Vasut
• [PATCH 2/8] imx: convert pico-imx6 to DM_VIDEO   Anatolij Gustschin
• [PATCH 2/8] lib: crypto: add public_key_verify_signature()   AKASHI Takahiro
• [PATCH 2/8] lib: crypto: add public_key_verify_signature()   Heinrich Schuchardt
• [PATCH 2/8] mx6memcal: Finish migration to defconfig options   Eric Nelson
• [PATCH 2/8] mx6memcal: Finish migration to defconfig options   Tom Rini
• [PATCH 2/8] regmap: zero out the regmap on allocation   Pratyush Yadav
• [PATCH 2/8] test: Add tests for SOC uclass   Dave Gerlach
• [PATCH 20/22] x86: mtrr: Restructure so command execution is in one place   Wolfgang Wallner
• [PATCH 20/30] Convert CONFIG_CMDLINE_EDITING to Kconfig   Tom Rini
• [PATCH 21/22] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU   Wolfgang Wallner
• [PATCH 21/30] Convert CONFIG_CONS_INDEX to Kconfig   Tom Rini
• [PATCH 22/22] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Wolfgang Wallner
• [PATCH 22/30] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig   Tom Rini
• [PATCH 22/30] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig   Igor Opaniuk
• [PATCH 23/30] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig   Tom Rini
• [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Tom Rini
• [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Ye Li
• [PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Tom Rini
• [PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Vladimir Oltean
• [PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Tom Rini
• [PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Vladimir Oltean
• [PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Tom Rini
• [PATCH 26/30] Convert CONFIG_BOOTM_NETBSD to Kconfig   Tom Rini
• [PATCH 27/30] Kconfig: Remove CONFIG_CLOCKS_IN_MHZ   Tom Rini
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Tom Rini
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Marek Vasut
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Tom Rini
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Tom Rini
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Marek Vasut
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Tom Rini
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Patrick DELAUNAY
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Adam Ford
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Tom Rini
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Adam Ford
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Adam Ford
• [PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support   Luca Ceresoli
• [PATCH 29/30] spi: Update build guard for DM objects to cover SPL/TPL   Tom Rini
• [PATCH 3/3] arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT   Vignesh Raghavendra
• [PATCH 3/3] arm: dts: k3: Add RTI watchdogs   Jan Kiszka
• [PATCH 3/3] ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support   Jagan Teki
• [PATCH 3/3] ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support   Kever Yang
• [PATCH 3/3] asm/u-boot.h: remove bd_t definitions   Masahiro Yamada
• [PATCH 3/3] cmd: bootefi: Honor the address & size cells properties correctly   Atish Patra
• [PATCH 3/3] cmd: bootefi: Honor the address & size cells properties correctly   Heinrich Schuchardt
• [PATCH 3/3] cmd: bootefi: Honor the address & size cells properties correctly   Atish Patra
• [PATCH 3/3] configs: lx2160a: Enable Watchdog support   Biwen Li
• [PATCH 3/3] imx8: spl: Support booting from secondary container set   Ye Li
• [PATCH 3/3] kconfig: fix typo for OHCI host and add to DM list   Tom Rini
• [PATCH 3/3] mx6ul_14x14_evk: Change environment offset to overlap with U-Boot   Otavio Salvador
• [PATCH 3/3] mx6ul_14x14_evk: Change environment offset to overlap with U-Boot   Fabio Estevam
• [PATCH 3/3] mx6ull_14x14_evk_plugin: Convert to DM_ETH   Fabio Estevam
• [PATCH 3/3] mx6ull_14x14_evk_plugin: Convert to DM_ETH   sbabic at denx.de
• [PATCH 3/3] pci: layerscape: add a way of specifying additional iommu mappings   laurentiu.tudor at nxp.com
• [PATCH 3/3] pinctrl: bcm283x: Store the return value of dev_read_u32_default to int   Ovidiu Panait
• [PATCH 3/3] roc-rk3399-pc: Enable USB Gadget   Jagan Teki
• [PATCH 3/3] rockchip: Pinebook Pro: Fix SPI flash and store env on it   Peter Robinson
• [PATCH 3/3] rockchip: Pinebook Pro: Fix SPI flash and store env on it   Kever Yang
• [PATCH 3/3] spi: atmel: Drop atmel_spi.h   Jagan Teki
• [PATCH 3/3] x86: quark: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Bin Meng
• [PATCH 3/3] x86: quark: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Andy Shevchenko
• [PATCH 3/3] x86: quark: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Bin Meng
• [PATCH 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1   Fabio Estevam
• [PATCH 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1   Tom Rini
• [PATCH 3/4] ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier   Jagan Teki
• [PATCH 3/4] ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier   Kever Yang
• [PATCH 3/4] arm: kirkwood: enable DM_USB for LaCie board   Simon Guinot
• [PATCH 3/4] board: fsl: lx2160aqds: identify SDHC adapter during board init   Yangbo Lu
• [PATCH 3/4] common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image   Tero Kristo
• [PATCH 3/4] crypto/fsl: support newer SEC modules   Michael Walle
• [PATCH 3/4] crypto/fsl: support newer SEC modules   Horia Geantă
• [PATCH 3/4] mtd: spinand: Do not erase the block before writing a bad block marker   Mikhail Kshevetskiy
• [PATCH 3/4] net: dc2114x: Add Kconfig entries   Marek Vasut
• [PATCH 3/4] ram: stm32mp1: use the DDR size by default in the test addressBus   Patrick Delaunay
• [PATCH 3/4] ti816x_evm: Enable DM_MMC   Tom Rini
• [PATCH 3/4] ti816x_evm: Enable DM_MMC   Tom Rini
• [PATCH 3/5] arm: qemu: implement enable_caches()   Ard Biesheuvel
• [PATCH 3/5] arm: qemu: implement enable_caches()   Heinrich Schuchardt
• [PATCH 3/5] arm: qemu: implement enable_caches()   Tom Rini
• [PATCH 3/5] clk: renesas: Add R8A774A1 clock tables   Adam Ford
• [PATCH 3/5] fu540: dtsi: add reset producer and consumer entries   Sagar Shrikant Kadam
• [PATCH 3/5] fu540: dtsi: add reset producer and consumer entries   Bin Meng
• [PATCH 3/5] fu540: dtsi: add reset producer and consumer entries   Sean Anderson
• [PATCH 3/5] fu540: dtsi: add reset producer and consumer entries   Bin Meng
• [PATCH 3/5] imx8mm_beacon: Select the watchdog driver   sbabic at denx.de
• [PATCH 3/5] patman: Decode output from the '--show-types' option   Simon Glass
• [PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on   Bin Meng
• [PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on   Sagar Kadam
• [PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on   Bin Meng
• [PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on   Sagar Kadam
• [PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on   Pragnesh Patel
• [PATCH 3/6] board: puma: reorganize devicetrees to actually work and match upstream   Heiko Stuebner
• [PATCH 3/6] board: puma: reorganize devicetrees to actually work and match upstream   Philipp Tomsich
• [PATCH 3/6] checkpatch.pl: Add a check for tests needed for uclasses   Tom Rini
• [PATCH 3/6] cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Simon Glass
• [PATCH 3/6] cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Stefan Roese
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH 3/6] env: Fix invalid env handling in env_init()   Tom Rini
• [PATCH 3/6] mips: malta: build u-boot-swap.bin   Daniel Schwierzeck
• [PATCH 3/6] mmc: read ssr for SD spi   Pragnesh Patel
• [PATCH 3/6] patman: Don't try to process checkpatch lines twice   sjg at google.com
• [PATCH 3/6] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
• [PATCH 3/7] f_sdp: Fix wrong usb request size   Peng Fan
• [PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address   Andre Przywara
• [PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address   Ramon Fried
• [PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address   Linus Walleij
• [PATCH 3/7] usb: ehci-mx6: Turn on the power domain of USB PHY   Peng Fan
• [PATCH 3/7] usb: ehci-mx6: Turn on the power domain of USB PHY   Marek Vasut
• [PATCH 3/8] bcmstb: Migrate CONFIG_CMD_EXT[24]   Tom Rini
• [PATCH 3/8] dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCs   Dave Gerlach
• [PATCH 3/8] imx: convert dms-ba16 boards to DM_VIDEO   Anatolij Gustschin
• [PATCH 3/8] lib: crypto: enable x509_check_for_self_signed()   AKASHI Takahiro
• [PATCH 3/8] regmap: Allow specifying read/write width   Pratyush Yadav
• [PATCH 30/30] Convert CONFIG_CADENCE_QSPI to Kconfig   Tom Rini
• [PATCH 4/4] arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support   Jagan Teki
• [PATCH 4/4] arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support   Kever Yang
• [PATCH 4/4] arm: kirkwood: enable DM_ETH for LaCie board   Simon Guinot
• [PATCH 4/4] cmd: booti: convert the debug print about image move to printf   Tero Kristo
• [PATCH 4/4] configs: lx2160aqds: enable CONFIG_BOARD_EARLY_INIT_R   Yangbo Lu
• [PATCH 4/4] crypto/fsl: add RNG support   Michael Walle
• [PATCH 4/4] crypto/fsl: add RNG support   Horia Geantă
• [PATCH 4/4] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH 4/4] crypto/fsl: add RNG support   Michael Walle
• [PATCH 4/4] crypto/fsl: add RNG support   Horia Geantă
• [PATCH 4/4] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH 4/4] crypto/fsl: add RNG support   Horia Geantă
• [PATCH 4/4] crypto/fsl: add RNG support   Michael Walle
• [PATCH 4/4] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH 4/4] crypto/fsl: add RNG support   Michael Walle
• [PATCH 4/4] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH 4/4] crypto/fsl: add RNG support   Michael Walle
• [PATCH 4/4] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH 4/4] crypto/fsl: add RNG support   Michael Walle
• [PATCH 4/4] mtd: spinand: enable erasing of bad mtd blocks   Mikhail Kshevetskiy
• [PATCH 4/4] mx6cuboxi: Convert to DM_ETH   Fabio Estevam
• [PATCH 4/4] mx6cuboxi: Convert to DM_ETH   Baruch Siach
• [PATCH 4/4] mx6cuboxi: Convert to DM_ETH   Tom Rini
• [PATCH 4/4] mx6cuboxi: Convert to DM_ETH   Vladimir Oltean
• [PATCH 4/4] net: dc2114x: Drop update_srom()   Marek Vasut
• [PATCH 4/4] ram: stm32mp1: add size and addr parameter to test all   Patrick Delaunay
• [PATCH 4/4] ti814x: Remove platform   Tom Rini
• [PATCH 4/4] ti814x: Remove platform   Tom Rini
• [PATCH 4/5] arm: qemu: disable the EFI workaround for older GRUB   Ard Biesheuvel
• [PATCH 4/5] arm: qemu: disable the EFI workaround for older GRUB   Heinrich Schuchardt
• [PATCH 4/5] imx8mp_evk: Select the watchdog driver   sbabic at denx.de
• [PATCH 4/5] patman: Add tests for the rest of the checkpatch checks   Simon Glass
• [PATCH 4/5] pinctrl: renesas: Add R8A774A1 PFC tables   Adam Ford
• [PATCH 4/5] pinctrl: renesas: Add R8A774A1 PFC tables   Marek Vasut
• [PATCH 4/5] pinctrl: renesas: Add R8A774A1 PFC tables   Adam Ford
• [PATCH 4/5] riscv: qemu: Add syscon reboot and poweroff support   Bin Meng
• [PATCH 4/5] riscv: qemu: Add syscon reboot and poweroff support   Pragnesh Patel
• [PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sean Anderson
• [PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Bin Meng
• [PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sean Anderson
• [PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Bin Meng
• [PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sagar Kadam
• [PATCH 4/6] .gitlab-ci.yml: add Qemu tests for MIPS Malta board   Daniel Schwierzeck
• [PATCH 4/6] board: puma: fix indentation of misc_init_r   Heiko Stuebner
• [PATCH 4/6] board: puma: fix indentation of misc_init_r   Philipp Tomsich
• [PATCH 4/6] checkpatch.pl: Warn if the flattree API is used   Tom Rini
• [PATCH 4/6] display_options: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Simon Glass
• [PATCH 4/6] env: nowhere: Implement .load callback   Marek Vasut
• [PATCH 4/6] env: nowhere: Implement .load callback   Tom Rini
• [PATCH 4/6] mmc: mmc_spi: Read R2 response for send status command - CMD13   Pragnesh Patel
• [PATCH 4/6] patman: Handle checkpatch output with notes and code   sjg at google.com
• [PATCH 4/6] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
• [PATCH 4/7] arm: juno: Enable DM_ETH   Andre Przywara
• [PATCH 4/7] arm: juno: Enable DM_ETH   Linus Walleij
• [PATCH 4/7] f_sdp: Support searching and loading FIT or container image   Peng Fan
• [PATCH 4/7] usb: ehci-mx6: Update driver to support i.MX8MM   Peng Fan
• [PATCH 4/7] usb: ehci-mx6: Update driver to support i.MX8MM   Marek Vasut
• [PATCH 4/8] arm: dts: k3-am65-wakeup: Introduce chipid node   Dave Gerlach
• [PATCH 4/8] ARM: rmobile: blanche: Disable CONFIG_CMD_SF / CONFIG_CMD_SPI   Tom Rini
• [PATCH 4/8] imx: convert cgtqmx6eval board to DM_VIDEO   Anatolij Gustschin
• [PATCH 4/8] lib: crypto: import pkcs7_verify.c from linux   AKASHI Takahiro
• [PATCH 4/9] ks2_evm: Switch to DM_SPL, SPL_OF_CONTROL   Jagan Teki
• [PATCH 5/5] arm: qemu: override flash accessors to use virtualizable instructions   Ard Biesheuvel
• [PATCH 5/5] arm: qemu: override flash accessors to use virtualizable instructions   Heinrich Schuchardt
• [PATCH 5/5] arm: qemu: override flash accessors to use virtualizable instructions   Ard Biesheuvel
• [PATCH 5/5] checkpatch: Don't warn about PREFER_IF in headers/DT files   Simon Glass
• [PATCH 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC   Sagar Shrikant Kadam
• [PATCH 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC   Bin Meng
• [PATCH 5/5] mmc: renesas-sdhi: Enable support for R8A774A1   Adam Ford
• [PATCH 5/5] riscv: sifive: fu540: Add gpio-restart support   Bin Meng
• [PATCH 5/5] riscv: sifive: fu540: Add gpio-restart support   Sagar Kadam
• [PATCH 5/5] riscv: sifive: fu540: Add gpio-restart support   Pragnesh Patel
• [PATCH 5/5] verdin-imx8mm: Select the watchdog driver   sbabic at denx.de
• [PATCH 5/6] .travis.yml: add Qemu tests for MIPS Malta board   Daniel Schwierzeck
• [PATCH 5/6] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
• [PATCH 5/6] board: puma: allow building with TPL as well   Heiko Stuebner
• [PATCH 5/6] board: puma: allow building with TPL as well   Philipp Tomsich
• [PATCH 5/6] checkpatch.pl: Request a test when a new command is added   Tom Rini
• [PATCH 5/6] command: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Simon Glass
• [PATCH 5/6] env: Add option to only ever append environment   Marek Vasut
• [PATCH 5/6] env: Add option to only ever append environment   Tom Rini
• [PATCH 5/6] mmc: mmc_spi: Generate R1 response for erase block start and end address   Pragnesh Patel
• [PATCH 5/6] patman: Support warnings in the patch subject   sjg at google.com
• [PATCH 5/7] sata_sil: Enable DM_PCI operation   Andre Przywara
• [PATCH 5/7] sata_sil: Enable DM_PCI operation   Linus Walleij
• [PATCH 5/7] spl: add g_dnl_get_board_bcd_device_number   Peng Fan
• [PATCH 5/7] usb: ehci-mx6: fix controller index for imx8m and imx8   Peng Fan
• [PATCH 5/7] usb: ehci-mx6: fix controller index for imx8m and imx8   Marek Vasut
• [PATCH 5/8] arm: dts: k3-j721e-mcu-wakeup: Introduce chipid node   Dave Gerlach
• [PATCH 5/8] imx: convert mx6cuboxi board to DM_VIDEO   Anatolij Gustschin
• [PATCH 5/8] lib: crypto: add pkcs7_digest()   AKASHI Takahiro
• [PATCH 5/8] topic_miami: Disable GPIO   Tom Rini
• [PATCH 5/9] spi: davinci: Drop non-dm code   Jagan Teki
• [PATCH 6/6] .azure-pipelines.yml: add Qemu tests for MIPS Malta board   Daniel Schwierzeck
• [PATCH 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit   Adam Ford
• [PATCH 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit   Marek Vasut
• [PATCH 6/6] board: puma: remove separate fit generator   Heiko Stuebner
• [PATCH 6/6] board: puma: remove separate fit generator   Philipp Tomsich
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   Tom Rini
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   AKASHI Takahiro
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   Simon Glass
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   Tom Rini
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   AKASHI Takahiro
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   Tom Rini
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   Simon Glass
• [PATCH 6/6] cmd: Add a memory-search command   Simon Glass
• [PATCH 6/6] cmd: Add a memory-search command   Stefan Roese
• [PATCH 6/6] cmd: Add a memory-search command   Michal Simek
• [PATCH 6/6] cmd: Add a memory-search command   Simon Glass
• [PATCH 6/6] cmd: Add a memory-search command   Michal Simek
• [PATCH 6/6] cmd: Add a memory-search command   Simon Glass
• [PATCH 6/6] cmd: Add a memory-search command   Michal Simek
• [PATCH 6/6] cmd: Add a memory-search command   Simon Glass
• [PATCH 6/6] cmd: Add a memory-search command   Michal Simek
• [PATCH 6/6] cmd: Add a memory-search command   Simon Glass
• [PATCH 6/6] configs: mt8512: enable fastboot   Chunfeng Yun
• [PATCH 6/6] env: Add support for explicit write access list   Marek Vasut
• [PATCH 6/6] env: Add support for explicit write access list   Tom Rini
• [PATCH 6/6] env: Add support for explicit write access list   Marek Vasut
• [PATCH 6/6] env: Add support for explicit write access list   Harald Seiler
• [PATCH 6/6] env: Add support for explicit write access list   Tom Rini
• [PATCH 6/6] mmc_spi: generate R1b response for erase and stop transmission command   Pragnesh Patel
• [PATCH 6/6] patman: Complain if a checkpatch line is not understood   sjg at google.com
• [PATCH 6/6] x86: fsp: Support a warning message when DRAM init is slow   Wolfgang Wallner
• [PATCH 6/7] arm: juno: Enable PCI   Andre Przywara
• [PATCH 6/7] arm: juno: Enable PCI   Linus Walleij
• [PATCH 6/7] f_sdp: Add EP1_OUT as default data receive pipe in sdp   Peng Fan
• [PATCH 6/7] usb: ehci-mx6: Enable iMX EHCI driver for iMX8M Nano   Peng Fan
• [PATCH 6/8] configs: am65x_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3   Dave Gerlach
• [PATCH 6/8] Convert CONFIG_BZIP2 et al to Kconfig   Tom Rini
• [PATCH 6/8] imx: convert gwventana board to DM_VIDEO   Anatolij Gustschin
• [PATCH 6/8] lib: crypto: export and enhance pkcs7_verify_one()   AKASHI Takahiro
• [PATCH 6/8] lib: crypto: export and enhance pkcs7_verify_one()   Heinrich Schuchardt
• [PATCH 6/8] lib: crypto: export and enhance pkcs7_verify_one()   AKASHI Takahiro
• [PATCH 6/9] spi: mxs: Drop nondm code   Jagan Teki
• [PATCH 7/7] arm: juno: Enable SATA controller   Andre Przywara
• [PATCH 7/7] arm: juno: Enable SATA controller   Linus Walleij
• [PATCH 7/7] f_sdp: Change bInterval of interrupt endpoint to 3   Peng Fan
• [PATCH 7/7] usb: ehci-mx6: configure usb out of suspend state   Peng Fan
• [PATCH 7/8] configs: j721e_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3   Dave Gerlach
• [PATCH 7/8] Convert CONFIG_CMD_ASKENV et al to Kconfig   Tom Rini
• [PATCH 7/8] efi_loader: signature: rework for intermediate certificates support   AKASHI Takahiro
• [PATCH 7/8] efi_loader: signature: rework for intermediate certificates support   Heinrich Schuchardt
• [PATCH 7/8] imx: convert mx51evk board to DM_VIDEO   Anatolij Gustschin
• [PATCH 7/8] regmap: Add support for regmap fields   Pratyush Yadav
• [PATCH 7/8] regmap: Add support for regmap fields   Simon Glass
• [PATCH 7/9] spi: mxs: Code cleanup   Jagan Teki
• [PATCH 8/8] arm: mach-k3: Use SOC driver for device identification   Dave Gerlach
• [PATCH 8/8] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Tom Rini
• [PATCH 8/8] imx: convert mx53loco board to DM_VIDEO   Anatolij Gustschin
• [PATCH 8/8] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH 8/8] test/py: efi_secboot: add test for intermediate certificates   Heinrich Schuchardt
• [PATCH 8/9] spi: Zap SOFT_SPI (non-dm)   Jagan Teki
• [PATCH]: cmd: part: add part block command   razvan.becheriu at gmail.com
• [PATCH]: cmd: part: add part block command   Tom Rini
• [PATCH]: cmd: part: add part block command   razvan becheriu
• [PATCH]: cmd: part: add part block command   Tom Rini
• [PATCH]: cmd: part: add part block command   razvan becheriu
• [PATCH]: cmd: part: add part block command   Tom Rini
• [PATCH]: cmd: part: add part block command   razvan becheriu
• [PATCH]: cmd: part: add part block command   Tom Rini
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Tom Rini
• [PATCH] [RFC] tools: fitmount: fuse mount fit images   Selva Muthukumar
• [PATCH] [RFC] tools: fitmount: fuse mount fit images   selvamuthukumar v
• [PATCH] [RFC] tools: fitmount: fuse mount fit images   Tom Rini
• [PATCH] [RFC] tools: fitmount: fuse mount fit images   selvamuthukumar v
• [PATCH] [RFC] tools: fitmount: fuse mount fit images   Rasmus Villemoes
• [PATCH] [RFC] tools: fitmount: fuse mount fit images   Selva Muthukumar
• [PATCH] [RFC] tools: fitmount: fuse mount fit images   Tom Rini
• [PATCH] Add support for SHA384 and SHA512   Tom Rini
• [PATCH] Add support for SHA384 and SHA512   Tom Rini
• [PATCH] arm64: issue ISB after updating system registers   Volodymyr Babchuk
• [PATCH] arm64: ls1043a: Remove the workaround of erratum A-009929   Zhiqiang Hou
• [PATCH] arm64: Remove CONFIG_SYS_FULL_VA macro   Michal Simek
• [PATCH] arm64: versal: Let U-Boot to update memory node by default   Michal Simek
• [PATCH] arm64: xilinx: Print fpga error value in hex   Michal Simek
• [PATCH] arm64: zynqmp: Define eeprom fixed partitions in DT   Michal Simek
• [PATCH] arm64: zynqmp: Fix set_fdtfile() not to break u-boots DTB   Michal Simek
• [PATCH] arm64: zynqmp: Fix set_fdtfile() not to break u-boots DTB   Michal Simek
• [PATCH] arm64: zynqmp: Print multiboot reg in decimal   Michal Simek
• [PATCH] arm64: zynqmp: Print multiboot reg in decimal   Michal Simek
• [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Brandon Maier
• [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Luca Ceresoli
• [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Michal Simek
• [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Luca Ceresoli
• [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Luca Ceresoli
• [PATCH] ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCI   Tom Rini
• [PATCH] ARM: da850-evm: Remove SPI from SPL when booting from NAND   Adam Ford
• [PATCH] ARM: da850-evm: Unify config options with Kconfig   Adam Ford
• [PATCH] ARM: dts: imx6q-tbs2910: Fix Ethernet regression   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabreauto: Fix AR8031 phy-mode   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabreauto: Fix AR8031 phy-mode   sbabic at denx.de
• [PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode   Tom Rini
• [PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode   sbabic at denx.de
• [PATCH] ARM: dts: imxrt1050: indent lcdif node correctly   sbabic at denx.de
• [PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns   Ley Foon Tan
• [PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns   Marek Vasut
• [PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns   Tan, Ley Foon
• [PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns   Marek Vasut
• [PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns   Tan, Ley Foon
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Nico Becker
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Marek Vasut
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Nico Becker
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Marek Vasut
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Dinh Nguyen
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Tan, Ley Foon
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Nico Becker
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Nico Becker
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Nico Becker
• [PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot   Dinh Nguyen
• [PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x   Patrick Delaunay
• [PATCH] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Marek Vasut
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Marek Vasut
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on ST boards   Patrick Delaunay
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on ST boards   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Reinstate card detect behavior on ST boards   Patrick DELAUNAY
• [PATCH] ARM: imx6: Fetch MAC address in board_init_late() on DH iMX6 PDK2   sbabic at denx.de
• [PATCH] ARM: imx: ddr: Add missing PHY reset   sbabic at denx.de
• [PATCH] ARM: imx: ddr: Fill in missing DDRC ZQCTLx on i.MX7   sbabic at denx.de
• [PATCH] ARM: imx: soc: Add reset for non-DM case   Stefano Babic
• [PATCH] ARM: imx: soc: Add reset for non-DM case   Peng Fan
• [PATCH] ARM: imx: soc: Select default TEXT_BASE for MX7   sbabic at denx.de
• [PATCH] ARM: imx: soc: Switch BOARD_EARLY_INIT_F to imply on MX7   sbabic at denx.de
• [PATCH] arm: k3: Consolidate and silence k3_fit_atf.sh call   Jan Kiszka
• [PATCH] arm: k3: Consolidate and silence k3_fit_atf.sh call   Lokesh Vutla
• [PATCH] arm: k3: Consolidate and silence k3_fit_atf.sh call   Lokesh Vutla
• [PATCH] ARM: rmobile: Increase PHY auto-negotiation timeout to 20s   Marek Vasut
• [PATCH] arm: socfpga: add board support for ic-automation moritz III   Nico Becker
• [PATCH] arm: socfpga: add board support for ic-automation moritz III   Marek Vasut
• [PATCH] arm: socfpga: gen5: Enable cache driver in SPL   Ley Foon Tan
• [PATCH] arm: socfpga: gen5: Enable cache driver in SPL   Marek Vasut
• [PATCH] arm: socfpga: gen5: Enable cache driver in SPL   Simon Goldschmidt
• [PATCH] arm: socfpga: gen5: Enable cache driver in SPL   Tan, Ley Foon
• [PATCH] arm: socfpga: misc_s10: Fix EMAC register address calculation   Ley Foon Tan
• [PATCH] arm: stm32mp: protect DBGMCU_IDC access with BSEC   Patrick Delaunay
• [PATCH] arm: stm32mp: stm32prog: add "Device Name" in iproduct during DFU USB enumeration   Patrick Delaunay
• [PATCH] arm: versal: Fix xspi0 boot mode   Michal Simek
• [PATCH] armv8: layerscape: don't remove crypto node on LS1028A   Michael Walle
• [PATCH] armv8: layerscape: don't remove crypto node on LS1028A   Michael Walle
• [PATCH] armv8: layerscape: don't remove crypto node on LS1028A   Horia Geantă
• [PATCH] armv8: ls1012a: RGMII ports require internal delay   Chaitanya Sakinam
• [PATCH] armv8: ls1028ardb: add xspi parameter to qixis command   andy.tang at nxp.com
• [PATCH] armv8: MMU: Mark code memory Executable, any other Non-Executable   marek.bykowski at gmail.com
• [PATCH] Azure/GitLab: Move to latest Docker image   Tom Rini
• [PATCH] Azure/GitLab: Move to latest Docker image   Tom Rini
• [PATCH] azure: gitlab: travis: Update OpenSBI used for RISC-V testing   Bin Meng
• [PATCH] board: amlogic: Add Odroid-N2 board support   Neil Armstrong
• [PATCH] board: amlogic: Add Odroid-N2 board support   Anand Moon
• [PATCH] board: amlogic: Add Odroid-N2 board support   Neil Armstrong
• [PATCH] board: amlogic: Add Odroid-N2 board support   Anand Moon
• [PATCH] board: amlogic: Add Odroid-N2 board support   Neil Armstrong
• [PATCH] board: st: move type-c stusb1600 controller code in a driver   Patrick Delaunay
• [PATCH] board: st: stm32mp1: increase teed partition   Patrick Delaunay
• [PATCH] board: ti: am335x_evm: Remove duplicate setting of bd_ram_ofs member   Tom Rini
• [PATCH] board: ti: am335x_evm: Remove duplicate setting of bd_ram_ofs member   Grygorii Strashko
• [PATCH] board: ti: am654: Disable SA2UL node for HS devices   Andrew F. Davis
• [PATCH] board: ti: am654: Disable SA2UL node for HS devices   Lokesh Vutla
• [PATCH] board: ti: common: Fix pointer-bool-conversion warnings   Tom Rini
• [PATCH] board: ti: common: Fix pointer-bool-conversion warnings   Lokesh Vutla
• [PATCH] board: ti: common: Fix pointer-bool-conversion warnings   Lokesh Vutla
• [PATCH] board: topic-miami: Set FCLK1 to 150MHz   Michal Simek
• [PATCH] board: topic-miami: Set FCLK1 to 150MHz   Michal Simek
• [PATCH] board: zynqmp: Fix for wrong AMS setting by ROM   Michal Simek
• [PATCH] board: zynqmp: Fix for wrong AMS setting by ROM   Michal Simek
• [PATCH] bootcount_ext: Add Ext4 build dependency   Tom Rini
• [PATCH] buildman: Remove _of_#_ from results directory paths   Simon Glass
• [PATCH] buildman: Remove _of_#_ from results directory paths   sjg at google.com
• [PATCH] checkpatch.pl: Fully re-sync with v5.7   Tom Rini
• [PATCH] checkpatch: fix a false check against wchar/utf-16 string   AKASHI Takahiro
• [PATCH] checkpatch: fix a false check against wchar/utf-16 string   Tom Rini
• [PATCH] clk: Add more information to debug messages   Sean Anderson
• [PATCH] clk: renesas: Synchronize Gen2 MSTP teardown tables   Marek Vasut
• [PATCH] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH] clk: versal: Remove alt_ref_clk from clock sources   Michal Simek
• [PATCH] cm_fx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH] cmd: add a panic command   Heiko Stuebner
• [PATCH] cmd: add a panic command   Simon Glass
• [PATCH] cmd: add clone command   John Chau
• [PATCH] cmd: add clone command   Tom Rini
• [PATCH] cmd: bootefi: Fix fdt_size variable type in efi_carve_out_dt_rsv()   Bin Meng
• [PATCH] cmd: bootefi: Fix fdt_size variable type in efi_carve_out_dt_rsv()   Heinrich Schuchardt
• [PATCH] cmd: Correct the 'md.q' command   Simon Glass
• [PATCH] cmd: Correct the 'md.q' command   Tom Rini
• [PATCH] cmd: fitupd: move config check to Kconfig   Tom Rini
• [PATCH] cmd: mmc: Add mmc reg read command for reading card registers   Marek Vasut
• [PATCH] cmd: mmc: Add mmc reg read command for reading card registers   Michael Nazzareno Trimarchi
• [PATCH] cmd: mmc: Add mmc reg read command for reading card registers   Michael Nazzareno Trimarchi
• [PATCH] cmd: mmc: Add mmc reg read command for reading card registers   Peng Fan
• [PATCH] cmd: mmc: Add mmc reg read command for reading card registers   Marek Vasut
• [PATCH] cmd: mmc: Add mmc reg read command for reading card registers   Peng Fan
• [PATCH] cmd: mmc: Cache-align extcsd read target   Marek Vasut
• [PATCH] cmd: mmc: Cache-align extcsd read target   Michael Nazzareno Trimarchi
• [PATCH] cmd: part: Add 'block' sub-command   razvan.becheriu at gmail.com
• [PATCH] cmd: part: Add 'block' sub-command   Tom Rini
• [PATCH] common/board_f: Respect original FDT size while relocating   Oleksandr Andrushchenko
• [PATCH] common/board_f: Respect original FDT size while relocating   Tom Rini
• [PATCH] common/board_f: Respect original FDT size while relocating   Oleksandr Andrushchenko
• [PATCH] common/board_f: Respect original FDT size while relocating   Tom Rini
• [PATCH] common/board_f: Respect original FDT size while relocating   Oleksandr Andrushchenko
• [PATCH] common/board_f: Respect original FDT size while relocating   Simon Glass
• [PATCH] common: hash: Remove a debug printf statement   Harald Seiler
• [PATCH] common: hash: Remove a debug printf statement   Tom Rini
• [PATCH] configs: cei-tk1-som: remove CONFIG_ARMV7_PSCI in include file   Patrick Delaunay
• [PATCH] configs: ls1012a/ls1046a: Define CONFIG_ENV_OVERWRITE   Kuldeep Singh
• [PATCH] configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN value   Kuldeep Singh
• [PATCH] configs: ls1043aqds: Configure QSPI related configs   Kuldeep Singh
• [PATCH] configs: ls1046aqds: Configure QSPI related configs   Kuldeep Singh
• [PATCH] configs: powerpc: add usb (host) mass storage support   Ran Wang
• [PATCH] configs: powerpc: add usb (host) mass storage support   Tom Rini
• [PATCH] configs: stm32mp1: activate WATCHDOG   Patrick Delaunay
• [PATCH] configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp   Patrick Delaunay
• [PATCH] Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig   Patrick Delaunay
• [PATCH] Convert CONFIG_MXC_UART to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_MXC_UART to Kconfig   Peng Fan
• [PATCH] Correct sun8i-v3s SRAM size   Jagan Teki
• [PATCH] Correct sun8i-v3s SRAM size   Benedikt-Alexander Mokroß
• [PATCH] Correct sun8i-v3s SRAM size   Maxime Ripard
• [PATCH] Correct sun8i-v3s SRAM size   Jagan Teki
• [PATCH] crypto/fsl: fix unaligned access   Michael Walle
• [PATCH] dm: core: Correct comment on uclass_id_foreach_dev()   Simon Glass
• [PATCH] dm: core: Correct comment on uclass_id_foreach_dev()   Michael Nazzareno Trimarchi
• [PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card   Johannes Krottmayer
• [PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card   Michal Simek
• [PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card   Johannes Krottmayer
• [PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card   Michal Simek
• [PATCH] doc: driver-model: fix typo in design.rst   Dario Binacchi
• [PATCH] doc: driver-model: fix typo in design.rst   Simon Glass
• [PATCH] doc: driver-model: Update SPI migration status   Jagan Teki
• [PATCH] doc: qemu-riscv: Update QEMU run command   Bin Meng
• [PATCH] doc: qemu-riscv: Update QEMU run command   Atish Patra
• [PATCH] drivers: net: e1000: with DM_ETH needs DM_PCI too   Priyanka Jain (OSS)
• [PATCH] drivers: net: qe: deselect QE when DM_ETH is enabled   Priyanka Jain (OSS)
• [PATCH] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH] env/fat.c: allow loading from a FAT partition on the MMC boot device   David Woodhouse
• [PATCH] env: add failing trace in env_save   Patrick Delaunay
• [PATCH] env: Add option to only ever append environment   Rasmus Villemoes
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add option to only ever append environment   Rasmus Villemoes
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add option to only ever append environment   Tom Rini
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add option to only ever append environment   Tom Rini
• [PATCH] env: Add option to only ever append environment   Tom Rini
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add option to only ever append environment   Tom Rini
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add option to only ever append environment   Tom Rini
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add option to only ever append environment   Tom Rini
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: correct overflow check of env_has_init size   Patrick Delaunay
• [PATCH] env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR   Patrick Delaunay
• [PATCH] env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR   Tom Rini
• [PATCH] env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR   Tom Rini
• [PATCH] fastboot: getvar: fix partition-size return value   Gary Bisson
• [PATCH] fastboot: Support defining raw partitions without a partition table   Filip Brozovic
• [PATCH] firmware: zynqmp: Change panic logic in zynqmp_pmufw_load_config_object()   Michal Simek
• [PATCH] Fix MMC access on Sabrelite   Jonathan Gray
• [PATCH] Fix MMC access on Sabrelite   Jaehoon Chung
• [PATCH] Fix MMC access on Sabrelite   Martyn Welch
• [PATCH] fs/fat.c: Do not perform zero block reads if there are no blocks left   Jason Wessel
• [PATCH] fs/fat.c: Do not perform zero block reads if there are no blocks left   Jason Wessel
• [PATCH] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left   Jason Wessel
• [PATCH] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left   Tom Rini
• [PATCH] fs: fat: fix fat iteration   Christian Gmeiner
• [PATCH] fs: fat: fix fat iteration   Heinrich Schuchardt
• [PATCH] fs: fat: fix fat iteration   Christian Gmeiner
• [PATCH] fs: fat: fix fat iteration   Heinrich Schuchardt
• [PATCH] gitlab: add pycrypto for arm64   Kever Yang
• [PATCH] gitlab: add pycrypto for arm64   Tom Rini
• [PATCH] gitlab: add pycrypto for arm64   Kever Yang
• [PATCH] gitlab: add pycrypto for arm64   Tom Rini
• [PATCH] gpio: mxc_gpio: Improve to use ofdata_to_platdata   Ye Li
• [PATCH] gpio: omap_gpio: Fix unused function warning in non-DM case   Tom Rini
• [PATCH] gpio: omap_gpio: Fix unused function warning in non-DM case   Lokesh Vutla
• [PATCH] gpio: omap_gpio: Fix unused function warning in non-DM case   Lokesh Vutla
• [PATCH] i2c: eeprom: Use reg property instead of offset and size   Michal Simek
• [PATCH] i2c: eeprom: Use reg property instead of offset and size   Simon Glass
• [PATCH] i2c: imx_lpi2c: Improve the codes to use private data   Ye Li
• [PATCH] image: Add support for ZSTD decompression   Robert Marko
• [PATCH] image: Add support for ZSTD decompression   Rasmus Villemoes
• [PATCH] image: Add support for ZSTD decompression   Tom Rini
• [PATCH] image: android: fix abootimg support   Tom Rini
• [PATCH] imx8mp_evk: Add a README file   sbabic at denx.de
• [PATCH] imx: Kconfig: enable IMX_BOOTAUX for i.MX8M   sbabic at denx.de
• [PATCH] imx: Update MTD partitions layout for display5 (i.MX6Q) board   sbabic at denx.de
• [PATCH] lib: zlib: Remove offset pointer optimization in inftrees.c   Ley Foon Tan
• [PATCH] lib: zlib: Use post-increment only in inffast.c   Ley Foon Tan
• [PATCH] libfdt: Remove superfluous NUL character from overlay symbols   sjg at google.com
• [PATCH] lz4: fix decompressor on big-endian powerpc   Rasmus Villemoes
• [PATCH] lz4: fix decompressor on big-endian powerpc   Julius Werner
• [PATCH] lz4: fix decompressor on big-endian powerpc   Rasmus Villemoes
• [PATCH] Makefile: Silence relocate-rela call   Jan Kiszka
• [PATCH] mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage   Stefan Roese
• [PATCH] mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage   Daniel Schwierzeck
• [PATCH] mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage   Stefan Roese
• [PATCH] misc: scu: Remove child dev bind   Ye Li
• [PATCH] mkimage: Default to adding a crc32 hash with '-f auto'   Tom Rini
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Lokesh Vutla
• [PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg()   Tom Rini
• [PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg()   Peng Fan
• [PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg()   Lokesh Vutla
• [PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg()   Tom Rini
• [PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg()   Lokesh Vutla
• [PATCH] mmc: Parse new binding for eMMC fixed driver type   Shunsuke Tokumoto
• [PATCH] mmc: zynq_sdhci: Remove global pointer   Michal Simek
• [PATCH] mtd: spi-nor: Enable QE bit for ISSI flash in case of SFDP   Pragnesh Patel
• [PATCH] musb-new: Use predefined configuration data for SUN50I_H6   Roman Stratiienko
• [PATCH] net: cpsw: Add __maybe_unused to generated inlines   Tom Rini
• [PATCH] net: cpsw: Add __maybe_unused to generated inlines   Grygorii Strashko
• [PATCH] net: cpsw: Add __maybe_unused to generated inlines   Lokesh Vutla
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Patrick Delaunay
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Patrick DELAUNAY
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Marek Vasut
• [PATCH] net: eth-uclass: Fix message if mac is coming from DT or ROM   Tom Rini
• [PATCH] net: eth-uclass: Fix message if mac is coming from DT or ROM   Michal Simek
• [PATCH] net: eth-uclass: Fix message if mac is coming from DT or ROM   Tom Rini
• [PATCH] net: Fix error if some network features are disabled   Tom Rini
• [PATCH] net: gem: Disable PCS autonegotiation in case of fixed-link   Michal Simek
• [PATCH] net: move random_port() to dns   Tom Rini
• [PATCH] net: phy: add phyid search in vendor specific space   Tom Rini
• [PATCH] net: phy: micrel: ksz8061 implement errata 80000688A fix   Tom Rini
• [PATCH] net: ping: reset stored IP once the command finishes   Tom Rini
• [PATCH] net: ping: reset stored IP once the command finishes   Marek Szyprowski
• [PATCH] net: tftp: fix option validation as per RFCs   Tom Rini
• [PATCH] net: tftp: fix progress marker for file transfer   Tom Rini
• [PATCH] net: xilinx: axi_emac: Fix endless loop when no PHYs are connected   Michal Simek
• [PATCH] net: xilinx: axi_emac: Fix endless loop when no PHYs are connected   Michal Simek
• [PATCH] nitrogen6x: update video console name   Anatolij Gustschin
• [PATCH] Nokia RX-51: Add link for u-boot-gen-combined script to README file   Pali Rohár
• [PATCH] Nokia RX-51: Add link for u-boot-gen-combined script to README file   Lokesh Vutla
• [PATCH] Nokia RX-51: Fix checking if serial console was enabled   Pali Rohár
• [PATCH] Nokia RX-51: Fix checking if serial console was enabled   Lokesh Vutla
• [PATCH] nvme: Invalidate dcache before submitting admin cmd   Jagan Teki
• [PATCH] nvme: Invalidate dcache before submitting admin cmd   Bin Meng
• [PATCH] nvme: Invalidate dcache before submitting admin cmd   André Przywara
• [PATCH] nvme: Invalidate dcache before submitting admin cmd   Michael Nazzareno Trimarchi
• [PATCH] nvme: Invalidate dcache before submitting admin cmd   Bin Meng
• [PATCH] nvme: Invalidate dcache before submitting admin cmd   Michael Nazzareno Trimarchi
• [PATCH] nvme: Invalidate dcache before submitting admin cmd   André Przywara
• [PATCH] omap3_beagle: Finish current outstanding DM migrations   Tom Rini
• [PATCH] omap3_beagle: Finish current outstanding DM migrations   Adam Ford
• [PATCH] omap3_beagle: Finish current outstanding DM migrations   Tom Rini
• [PATCH] optee: copy FDT OP-TEE related nodes before generic FDT changes   Patrick Delaunay
• [PATCH] optee: fix copy of optee reserved-memory node   Patrick Delaunay
• [PATCH] optee: fix copy of optee reserved-memory node   Patrick DELAUNAY
• [PATCH] optee: fix copy of optee reserved-memory node   Tom Rini
• [PATCH] patman: use new --u-boot option with checkpath.pl   Daniel Schwierzeck
• [PATCH] patman: use new --u-boot option with checkpath.pl   Simon Glass
• [PATCH] patman: use new --u-boot option with checkpath.pl   Simon Glass
• [PATCH] patman: use new --u-boot option with checkpath.pl   Daniel Schwierzeck
• [PATCH] patman: use new --u-boot option with checkpath.pl   Simon Glass
• [PATCH] pci: Make Rockchip PCIe voltage regulators optional   Kever Yang
• [PATCH] phy: atheros: ar8035: Fix clock output calculation   Fabio Estevam
• [PATCH] phy: atheros: ar8035: Fix clock output calculation   Michael Walle
• [PATCH] phy: atheros: ar8035: Fix clock output calculation   Tom Rini
• [PATCH] phy: atheros: ar8035: Fix clock output calculation   Fabio Estevam
• [PATCH] phy: atheros: Fix the "qca,clk-out-frequency" example   Fabio Estevam
• [PATCH] phy: atheros: Fix the "qca,clk-out-frequency" example   Michael Walle
• [PATCH] phy: atheros: Fix the "qca,clk-out-frequency" example   Tom Rini
• [PATCH] phy: sun4i-usb: Align H6 initialization logic with the kernel   Jagan Teki
• [PATCH] pico-imx6ul: Fix Quick Start Guide URL   Fabio Estevam
• [PATCH] pinctrl: mediatek: add PUPD/R0/R1 support for MT7623   David Woodhouse
• Aw: [PATCH] pinctrl: mediatek: add PUPD/R0/R1 support for MT7623   Frank Wunderlich
• [PATCH] power: axp209: Limit inrush current for A20-OLinuXino_MICRO   Cédric Félizard
• [PATCH] power: pmic: Add SPL Kconfig entry for PFUZE100   Jaehoon Chung
• [PATCH] power: pmic: Add SPL Kconfig entry for PFUZE100   sbabic at denx.de
• [PATCH] power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling   Patrick Delaunay
• [PATCH] powerpc/mpc85xx: Fix compiling error with DM_GPIO   Priyanka Jain (OSS)
• [PATCH] powerpc: mpc85xx: fix unused variable warning   Priyanka Jain (OSS)
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Rasmus Villemoes
• [PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache   Stefan Roese
• [PATCH] psci: add 'static inline' to invoke_psci_fn() stub   Tom Rini
• [PATCH] README: davinci: Clarify when SPL is used and the target devices.   Adam Ford
• [PATCH] regmap: Check for out-of-range offsets before mapping them   Simon Glass
• [PATCH] regmap: Check for out-of-range offsets before mapping them   Pratyush Yadav
• [PATCH] regmap: Check for out-of-range offsets before mapping them   sjg at google.com
• [PATCH] regmap: Check for out-of-range offsets before mapping them   Pratyush Yadav
• [PATCH] regmap: Check for out-of-range offsets before mapping them   Simon Glass
• [PATCH] regulator: fix: enable gpio when requested   Tom Rini
• [PATCH] regulator: fix: enable gpio when requested   Mark Kettenis
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Sean Anderson
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Heinrich Schuchardt
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Sean Anderson
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Michal Simek
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Sean Anderson
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Simon Glass
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Tom Rini
• [PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"   Tom Rini
• [PATCH] RFC: dtoc: add POC for dtb shrink   Walter Lozano
• [PATCH] RFC: dtoc: add POC for dtb shrink   Walter Lozano
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Tom Rini
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Tom Rini
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Tom Rini
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCH] riscv: sbi: Add newline to error message   Sean Anderson
• [PATCH] riscv: sbi: Add newline to error message   Atish Patra
• [PATCH] riscv: sbi: Add newline to error message   Bin Meng
• [PATCH] rk3399: Add BOOTENV_SF command   Jagan Teki
• [PATCH] rk3399: Add BOOTENV_SF command   Jagan Teki
• [PATCH] rk3399: Add BOOTENV_SF command   Tom Rini
• [PATCH] rk3399: Add BOOTENV_SF command   Kever Yang
• [PATCH] rk3399: Add BOOTENV_SF command   Kever Yang
• [PATCH] rk3399: Add BOOTENV_SF command   Kever Yang
• [PATCH] roc-rk3399-pc: Update ENV offset, size   Jagan Teki
• [PATCH] rockchip: Add delay after link-training   Kurt Miller
• [PATCH] rockchip: Add delay after link-training   Jagan Teki
• [PATCH] rockchip: Add delay after link-training   Kurt Miller
• [PATCH] rockchip: Add delay after link-training   Kever Yang
• [PATCH] rockchip: Add delay after link-training   Shawn Lin
• [PATCH] rockchip: Add delay after link-training   Kurt Miller
• [PATCH] rockchip: Add delay after link-training   Peter Geis
• [PATCH] rockchip: Add delay after link-training   Kever Yang
• [PATCH] rockchip: Add delay after link-training   Kurt Miller
• [PATCH] rockchip: enable USB OHCI host for RockPro64   Kever Yang
• [PATCH] rockchip: i2c: fix switch to new implementation for rk3188   Alexander Kochetkov
• [PATCH] rockchip: i2c: fix switch to new implementation for rk3188   Kever Yang
• [PATCH] rockchip: i2c: fix switch to new implementation for rk3188   Alexander Kochetkov
• [PATCH] rockchip: i2c: fix switch to new implementation for rk3188   David Wu
• [PATCH] rockchip: i2c: fix switch to new implementation for rk3188   Heiko Schocher
• [PATCH] rockchip: rk3188: Fix back to BROM boot   Alexander Kochetkov
• [PATCH] rockchip: rk3188: Fix back to BROM boot   Kever Yang
• [PATCH] rockchip: rk3188: Fix back to BROM boot   Kever Yang
• [PATCH] rockchip: rk3399-evb: add stdout-path for the board   Kever Yang
• [PATCH] rockchip: rk3399: allow deselecting SPL_ATF_NO_PLATFORM_PARAM   Hugh Cole-Baker
• [PATCH] rockchip: rk3399: allow deselecting SPL_ATF_NO_PLATFORM_PARAM   Kever Yang
• [PATCH] rockchip: rk3399: allow deselecting SPL_ATF_NO_PLATFORM_PARAM   Walter Lozano
• [PATCH] rockchip: rockpro64: enable DM_KEYBOARD   Kever Yang
• [PATCH] rockchip: rockpro64: initialize USB in preboot   Marcin Juszkiewicz
• [PATCH] rockchip: rockpro64: initialize USB in preboot   Kever Yang
• Re: [PATCH] rockchip: rockpro64: initialize USB in preboot【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [PATCH] rockchip: rockpro64: Set cooling levels for pwm-fan   Kurt Miller
• [PATCH] sata_sil: make it buildable with DM_PCI   Marcin Juszkiewicz
• [PATCH] serial: Add missing Kconfig dependencies for debug consoles   Tom Rini
• [PATCH] serial: Convert ARM_DCC to Kconfig   Tom Rini
• [PATCH] serial: Convert ARM_DCC to Kconfig   Luca Ceresoli
• [PATCH] serial: Convert ARM_DCC to Kconfig   Tom Rini
• [PATCH] spi: zynq_[q]spi: Convert config's to macro's   Michal Simek
• [PATCH] splash: Fix build warning on 64 bits CPU   Ye Li
• [PATCH] splash: Fix build warning on 64 bits CPU   Jagan Teki
• [PATCH] splash: Fix build warning on 64 bits CPU   Anatolij Gustschin
• [PATCH] stm32mp1: configs: activate CMD_ERASEENV   Patrick Delaunay
• [PATCH] stm32mp1: use the command env info -q in env_check   Patrick Delaunay
• [PATCH] sunxi: Add support for using UART4 as console on A64   Nazım Gediz Aydındoğmuş
• [PATCH] sunxi: Add support for using UART4 as console on A64   Maxime Ripard
• [PATCH] sunxi: Add support for using UART4 as console on A64   Nazım Gediz AYDINDOĞMUŞ
• [PATCH] sunxi: Silence warning about non-static inline function   Jagan Teki
• [PATCH] sync helios4 config to clearfog and dts to kernel   dgilmore at redhat.com
• [PATCH] sync helios4 config to clearfog and dts to kernel   Stefan Roese
• [PATCH] test/py: test_efi_fit: Update #size-cells to 1   Bin Meng
• [PATCH] test/py: test_efi_fit: Update #size-cells to 1   Heinrich Schuchardt
• [PATCH] test/py: test_efi_fit: Update #size-cells to 1   Bin Meng
• [PATCH] test: add dependency for UT_LOG   Kever Yang
• [PATCH] test: add dependency for UT_LOG   Heinrich Schuchardt
• [PATCH] test: add dependency for UT_LOG   Kever Yang
• [PATCH] test: add dependency for UT_LOG   Heinrich Schuchardt
• [PATCH] test_sleep.py: make sleep time and margin configurable   Heiko Schocher
• [PATCH] test_sleep.py: make sleep time and margin configurable   Simon Glass
• [PATCH] test_sleep.py: make sleep time and margin configurable   Stephen Warren
• [PATCH] test_sleep.py: make sleep time and margin configurable   Stephen Warren
• [PATCH] test_sleep.py: make sleep time and margin configurable   Simon Glass
• [PATCH] test_sleep.py: make sleep time and margin configurable   Stephen Warren
• [PATCH] test_sleep.py: make sleep time and margin configurable   Simon Glass
• [PATCH] test_sleep.py: make sleep time and margin configurable   Stephen Warren
• [PATCH] tools: fw_env: Fix warning when reading too little   Tom Rini
• [PATCH] topic: zynqmp: Add support for zynqmp-xilinx-xdp platform   Michal Simek
• [PATCH] topic: zynqmp: Add support for zynqmp-xilinx-xdp platform   Michal Simek
• [PATCH] tpm2: tis_spi: add linux compatible fallback string   Bruno Thomsen
• [PATCH] tpm2: tis_spi: add linux compatible fallback string   Tom Rini
• [PATCH] tpm: add TPM2_GetRandom command support   Dhananjay Phadke
• [PATCH] tpm: add TPM2_GetRandom command support   Simon Glass
• [PATCH] travis-ci: Update QEMU RISC-V run command   Bin Meng
• [PATCH] travis-ci: Update QEMU RISC-V run command   Tom Rini
• [PATCH] travis-ci: Update QEMU RISC-V run command   Bin Meng
• [PATCH] travis-ci: Update QEMU RISC-V run command   Stephen Warren
• [PATCH] travis-ci: Update QEMU RISC-V run command   Stephen Warren
• [PATCH] trivial: Fix booot occurences   Michal Simek
• [PATCH] trivial: Fix booot occurences   Jaehoon Chung
• [PATCH] trivial: Fix booot occurences   Tom Rini
• [PATCH] usb: ci_udc: Add function to remove usb device   Peng Fan
• [PATCH] usb: eth: lan78xx: Fix logic in lan78xx_read_otp() to avoid a warning   Tom Rini
• [PATCH] usb: eth: lan78xx: Fix logic in lan78xx_read_otp() to avoid a warning   Marek Vasut
• [PATCH] usb: gadget: ether: Fix warnings about unused code   Tom Rini
• [PATCH] usb: gadget: Fix controller index in UMS   Peng Fan
• [PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Patrice Chotard
• [PATCH] usb: musb-new: Fix unused function warnings from clang   Tom Rini
• [PATCH] usb: musb-new: Fix unused function warnings from clang   Marek Vasut
• [PATCH] usb: xhci-dwc3: Fix usage of bulk PHY API   Chunfeng Yun
• [PATCH] video: bmp: Support 8bits BMP to 24/32 bits display   Ye Li
• [PATCH] video: bmp: Support 8bits BMP to 24/32 bits display   Jagan Teki
• [PATCH] video: bmp: Support 8bits BMP to 24/32 bits display   Fabio Estevam
• [PATCH] video: bmp: Support 8bits BMP to 24/32 bits display   Anatolij Gustschin
• [PATCH] video: check hardware version of DSI   Yannick Fertre
• [PATCH] video: check hardware version of DSI   Patrick DELAUNAY
• [PATCH] video: check hardware version of DSI   Philippe CORNU
• [PATCH] video: check hardware version of DSI   Anatolij Gustschin
• [PATCH] video: extend stdout video console work-around for 'vga'   Anatolij Gustschin
• [PATCH] video: ipuv3: fix building with disabled panel driver   Anatolij Gustschin
• [PATCH] video: ipuv3: remove some useless code to reduce binary size   Anatolij Gustschin
• [PATCH] video: make backlight and panel drivers optional   Anatolij Gustschin
• [PATCH] video: make vidconsole commands optional   Anatolij Gustschin
• [PATCH] video: rk_vop: Fix wrong bpix for frame buffer   Jagan Teki
• [PATCH] video: rk_vop: Fix wrong bpix for frame buffer   Jagan Teki
• [PATCH] video: rk_vop: Fix wrong bpix for frame buffer   Anatolij Gustschin
• [PATCH] video: rk_vop: Fix wrong bpix for frame buffer   Anatolij Gustschin
• [PATCH] video: rockchip: fix HDMI 4K resolution   Anatolij Gustschin
• [PATCH] video: rockchip: fix HDMI 4K resolution   Jagan Teki
• [PATCH] video: rockchip: fix HDMI 4K resolution   Anatolij Gustschin
• [PATCH] video: sunxi_display: Convert to DM_VIDEO   Jagan Teki
• [PATCH] video: vidconsole: avoid multiple lines overwrite logo   Ye Li
• [PATCH] video: vidconsole: avoid multiple lines overwrite logo   Jagan Teki
• [PATCH] video: vidconsole: avoid multiple lines overwrite logo   Anatolij Gustschin
• [PATCH] x86: Don't build some unused objects in TPL   Tom Rini
• [PATCH] x86: Don't build some unused objects in TPL   Bin Meng
• [PATCH] x86: Don't build some unused objects in TPL   Simon Glass
• [PATCH] xilinx: versal: Add new versal loadpdi command   Michal Simek
• [PATCH] xilinx: versal: Add new versal loadpdi command   Michal Simek
• [PATCH] xilinx: zynqmp: Enable pmufw config reloading   Michal Simek
• [PATCH] xilinx: zynqmp: Enable pmufw config reloading   Michal Simek
• [PATCH] zfs: fix missing include for disk_partition definition   Joel Johnson
• [PATCH] zfs: fix missing include for disk_partition definition   Tom Rini
• [PATCH for v2020.10 1/1] cmd: drop fitupd command   Heinrich Schuchardt
• [PATCH for v2020.10 1/1] cmd: drop fitupd command   Lukasz Majewski
• [PATCH RESEND v2 1/1] log: don't show function by default   Heinrich Schuchardt
• [PATCH RESEND v2 1/1] log: don't show function by default   Simon Glass
• [PATCH u-boot 0/4] r8152: support more chips   Hayes Wang
• [PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx   Hayes Wang
• [PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx   Marek Vasut
• [PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx   Hayes Wang
• [PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx   Marek Vasut
• [PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx   Hayes Wang
• [PATCH u-boot 2/4] eth/r8152: reset PHY after setting it   Hayes Wang
• [PATCH u-boot 2/4] eth/r8152: reset PHY after setting it   Marek Vasut
• [PATCH u-boot 2/4] eth/r8152: reset PHY after setting it   Hayes Wang
• [PATCH u-boot 2/4] eth/r8152: reset PHY after setting it   Marek Vasut
• [PATCH u-boot 3/4] eth/r8152: modify rtl_clear_bp function   Hayes Wang
• [PATCH u-boot 3/4] eth/r8152: modify rtl_clear_bp function   Marek Vasut
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Hayes Wang
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Marek Vasut
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Hayes Wang
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Marek Vasut
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Hayes Wang
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Marek Vasut
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Hayes Wang
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Marek Vasut
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Hayes Wang
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Marek Vasut
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Hayes Wang
• [PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B   Marek Vasut
• [PATCH u-boot] eth/r8152: update the firmware   Hayes Wang
• [PATCH u-boot] eth/r8152: update the firmware   Marek Vasut
• [PATCH u-boot] eth/r8152: update the firmware   Hayes Wang
• [PATCH u-boot] eth/r8152: update the firmware   Marek Vasut
• [PATCH u-boot] eth/r8152: update the firmware   Hayes Wang
• [PATCH u-boot] eth/r8152: update the firmware   Marek Vasut
• [PATCH u-boot] eth/r8152: update the firmware   Hayes Wang
• [PATCH u-boot] eth/r8152: update the firmware   Marek Vasut
• [PATCH u-boot v2 0/4] r8152: support more chips   Hayes Wang
• [PATCH U-BOOT v2 00/30] fs: btrfs: Re-implement btrfs support using the more widely used extent buffer base code   Qu Wenruo
• [PATCH U-BOOT v2 00/30] fs: btrfs: Re-implement btrfs support using the more widely used extent buffer base code   Marek Behún
• [PATCH u-boot v2 1/4] eth/r8152: reset bmu after disabling Tx/Rx   Hayes Wang
• [PATCH u-boot v2 1/4] eth/r8152: reset bmu after disabling Tx/Rx   Marek Vasut
• [PATCH u-boot v2 2/4] eth/r8152: reset PHY after setting it   Hayes Wang
• [PATCH u-boot v2 3/4] eth/r8152: modify rtl_clear_bp function   Hayes Wang
• [PATCH u-boot v2 4/4] eth/r8152: support RTL8153B/RTL8154B   Hayes Wang
• [PATCH u-boot v2] eth/r8152: update the firmware   Hayes Wang
• [PATCH u-boot v2] eth/r8152: update the firmware   Marek Vasut
• [PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs   Simon Glass
• [PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs   Tom Rini
• [PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs   Simon Glass
• [PATCH U-BOOT v3 01/30] fs: btrfs: Sync btrfs_btree.h from kernel   Marek Behún
• [PATCH U-BOOT v3 02/30] fs: btrfs: Add more checksum algorithms   Marek Behún
• [PATCH U-BOOT v3 03/30] fs: btrfs: Crossport btrfs_read_dev_super() from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 04/30] fs: btrfs: Crossport rbtree-utils from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 05/30] fs: btrfs: Crossport extent-cache.[ch] from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 06/30] fs: btrfs: Crossport extent-io.[ch] from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 07/30] fs: btrfs: Crossport structure accessor into ctree.h   Marek Behún
• [PATCH U-BOOT v3 08/30] fs: btrfs: Crossport volumes.[ch] from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 09/30] fs: btrfs: Crossport read_tree_block() from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 10/30] fs: btrfs: Rename struct btrfs_path to struct __btrfs_path   Marek Behún
• [PATCH U-BOOT v3 11/30] fs: btrfs: Rename btrfs_root to __btrfs_root   Marek Behún
• [PATCH U-BOOT v3 12/30] fs: btrfs: Crossport struct btrfs_root to ctree.h   Marek Behún
• [PATCH U-BOOT v3 13/30] fs: btrfs: Crossport btrfs_search_slot() from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 14/30] fs: btrfs: Crossport btrfs_read_sys_array() and btrfs_read_chunk_tree()   Marek Behún
• [PATCH U-BOOT v3 15/30] fs: btrfs: Crossport open_ctree_fs_info() from btrfs-progs   Marek Behún
• [PATCH U-BOOT v3 16/30] fs: btrfs: Rename path resolve related functions to avoid name conflicts   Marek Behún
• [PATCH U-BOOT v3 17/30] fs: btrfs: Use btrfs_readlink() to implement __btrfs_readlink()   Marek Behún
• [PATCH U-BOOT v3 18/30] fs: btrfs: inode: Allow next_length() to return value > BTRFS_NAME_LEN   Marek Behún
• [PATCH U-BOOT v3 19/30] fs: btrfs: Implement btrfs_lookup_path()   Marek Behún
• [PATCH U-BOOT v3 20/30] fs: btrfs: Use btrfs_iter_dir() to replace btrfs_readdir()   Marek Behún
• [PATCH U-BOOT v3 21/30] fs: btrfs: Use btrfs_lookup_path() to implement btrfs_exists() and btrfs_size()   Marek Behún
• [PATCH U-BOOT v3 22/30] fs: btrfs: Rename btrfs_file_read() and its callees to avoid name conflicts   Marek Behún
• [PATCH U-BOOT v3 23/30] fs: btrfs: Introduce btrfs_read_extent_inline() and btrfs_read_extent_reg()   Marek Behún
• [PATCH U-BOOT v3 24/30] fs: btrfs: Introduce lookup_data_extent() for later use   Marek Behún
• [PATCH U-BOOT v3 25/30] fs: btrfs: Implement btrfs_file_read()   Marek Behún
• [PATCH U-BOOT v3 26/30] fs: btrfs: Introduce function to resolve path in one subvolume   Marek Behún
• [PATCH U-BOOT v3 27/30] fs: btrfs: Introduce function to resolve the path of one subvolume   Marek Behún
• [PATCH U-BOOT v3 28/30] fs: btrfs: Imeplement btrfs_list_subvols() using new infrastructure   Marek Behún
• [PATCH U-BOOT v3 29/30] fs: btrfs: Cleanup the old implementation   Marek Behún
• [PATCH U-BOOT v3 30/30] MAINTAINERS: Add btrfs mailing list and myself as reviewer   Marek Behún
• [PATCH v1 0/1] Fix mkimage error message   Mylène Josserand
• [PATCH v1 0/4] rework DSI characteristics   Yannick Fertre
• [PATCH v1 0/4] rework DSI characteristics   Anatolij Gustschin
• [PATCH v1 0/4] rework DSI characteristics   Patrick DELAUNAY
• [PATCH v1 0/5] mips: Improve initial Octeon MIPS64 support   Stefan Roese
• [PATCH v1 0/7] Toradex: EEPROM storage support for Config Block   Igor Opaniuk
• [PATCH v1 0/9] mips: Add Octeon DDR4 init code   Stefan Roese
• [PATCH v1 00/13] This patch-series includes updates for Toradex modules:   Igor Opaniuk
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Simon Glass
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Tom Rini
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Soeren Moch
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Tom Rini
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Walter Lozano
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Tom Rini
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Walter Lozano
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   dphadke
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Simon Glass
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 00/43] x86: Programmatic generation of ACPI tables (Part C)   Simon Glass
• [PATCH v1 01/13] apalis-imx8: enable of_system_setup   Igor Opaniuk
• [PATCH v1 01/13] apalis-imx8: enable of_system_setup   sbabic at denx.de
• [PATCH v1 01/43] binman: Allow setting the ROM offset   Simon Glass
• [PATCH v1 02/13] apalis/colibri-imx8: re-enable CONFIG_IMX_SCU_THERMAL   Igor Opaniuk
• [PATCH v1 02/13] apalis/colibri-imx8: re-enable CONFIG_IMX_SCU_THERMAL   sbabic at denx.de
• [PATCH v1 02/43] binman: Refactor binman_entry_find() to allow other nodes   Simon Glass
• [PATCH v1 02/43] binman: Refactor binman_entry_find() to allow other nodes   Bin Meng
• [PATCH v1 03/13] colibri-imx8x: declare consoleargs   Igor Opaniuk
• [PATCH v1 03/13] colibri-imx8x: declare consoleargs   sbabic at denx.de
• [PATCH v1 03/43] binman: Add way to locate an entry in memory   Simon Glass
• [PATCH v1 04/13] colibri_imx7: add addresses required for distro boot   Igor Opaniuk
• [PATCH v1 04/13] colibri_imx7: add addresses required for distro boot   sbabic at denx.de
• [PATCH v1 04/15] arm: dts: ns3: add gpio node   Rayagonda Kokatanur
• [PATCH v1 04/43] acpi: Allow creating the GNVS to fail   Simon Glass
• [PATCH v1 04/43] acpi: Allow creating the GNVS to fail   Wolfgang Wallner
• [PATCH v1 04/43] acpi: Allow creating the GNVS to fail   Bin Meng
• [PATCH v1 05/13] colibri-imx6ull/imx7: define bootubipart for distro boot   Igor Opaniuk
• [PATCH v1 05/13] colibri-imx6ull/imx7: define bootubipart for distro boot   sbabic at denx.de
• [PATCH v1 05/43] dtoc: Support ACPI paths in of-platdata   Simon Glass
• [PATCH v1 06/13] colibri_vf_defconfig: enable part cmd   Igor Opaniuk
• [PATCH v1 06/13] colibri_vf_defconfig: enable part cmd   sbabic at denx.de
• [PATCH v1 06/43] dm: core: Add a way of overriding the ACPI device path   Simon Glass
• [PATCH v1 06/43] dm: core: Add a way of overriding the ACPI device path   Wolfgang Wallner
• [PATCH v1 06/43] dm: core: Add a way of overriding the ACPI device path   Bin Meng
• [PATCH v1 07/13] configs/colibri_vf.h: drop sdboot in favour of distro_bootcmd   Igor Opaniuk
• [PATCH v1 07/13] configs/colibri_vf.h: drop sdboot in favour of distro_bootcmd   sbabic at denx.de
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Simon Glass
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Wolfgang Wallner
• [PATCH v1 07/43] dm: acpi: Add support for the NHLT table   Bin Meng
• [PATCH v1 08/13] apalis-tk1: enable distroboot   Igor Opaniuk
• [PATCH v1 08/13] apalis-tk1: enable distroboot   sbabic at denx.de
• [PATCH v1 08/43] acpi: Export functions to write sized values   Simon Glass
• [PATCH v1 08/43] acpi: Export functions to write sized values   Wolfgang Wallner
• [PATCH v1 08/43] acpi: Export functions to write sized values   Bin Meng
• [PATCH v1 09/13] apalis-tk1: fix setting fdtfile value   Igor Opaniuk
• [PATCH v1 09/13] apalis-tk1: fix setting fdtfile value   sbabic at denx.de
• [PATCH v1 09/43] acpi: Support generation of a scope   Simon Glass
• [PATCH v1 09/43] acpi: Support generation of a scope   Wolfgang Wallner
• [PATCH v1 1/1] mkimage: Fix error message if write less data then expected   Mylène Josserand
• [PATCH v1 1/1] mkimage: Fix error message if write less data then expected   Walter Lozano
• [PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v1 1/4] video: mipi update panel platform data   Yannick Fertre
• [PATCH v1 1/4] video: mipi update panel platform data   Patrick DELAUNAY
• [PATCH v1 1/4] video: mipi update panel platform data   Anatolij Gustschin
• [PATCH v1 1/5] mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code   Stefan Roese
• [PATCH v1 1/5] mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code   Daniel Schwierzeck
• [PATCH v1 1/6] ARM: dts: imx6ull-colibri: move u-boot specific node   Igor Opaniuk
• [PATCH v1 1/7] toradex: tdx-cfg-block: add EEPROM read/store wrappers   Igor Opaniuk
• [PATCH v1 1/9] mips: octeon: dts: mrvl, cn73xx.dtsi: Add memory controller DT node   Stefan Roese
• [PATCH v1 10/13] toradex: imx: enable BOOTCOUNT feature   Igor Opaniuk
• [PATCH v1 10/13] toradex: imx: enable BOOTCOUNT feature   sbabic at denx.de
• [PATCH v1 10/43] acpi: Support generation of a generic register   Simon Glass
• [PATCH v1 10/43] acpi: Support generation of a generic register   Wolfgang Wallner
• [PATCH v1 10/43] acpi: Support generation of a generic register   Bin Meng
• [PATCH v1 11/13] apalis_imx6: boot env configuration updates   Igor Opaniuk
• [PATCH v1 11/13] apalis_imx6: boot env configuration updates   sbabic at denx.de
• [PATCH v1 11/43] acpi: mmc: Generate ACPI info for the PCI SD Card   Simon Glass
• [PATCH v1 11/43] acpi: mmc: Generate ACPI info for the PCI SD Card   Wolfgang Wallner
• [PATCH v1 11/43] acpi: mmc: Generate ACPI info for the PCI SD Card   Bin Meng
• [PATCH v1 12/13] colibri_imx7: boot env configuration updates   Igor Opaniuk
• [PATCH v1 12/13] colibri_imx7: boot env configuration updates   sbabic at denx.de
• [PATCH v1 12/43] x86: Add bindings for NHLT   Simon Glass
• [PATCH v1 12/43] x86: Add bindings for NHLT   Wolfgang Wallner
• [PATCH v1 12/43] x86: Add bindings for NHLT   Bin Meng
• [PATCH v1 13/13] colibri_imx6: boot env configuration updates   Igor Opaniuk
• [PATCH v1 13/13] colibri_imx6: boot env configuration updates   sbabic at denx.de
• [PATCH v1 13/43] acpi: Support generation of a device   Simon Glass
• [PATCH v1 13/43] acpi: Support generation of a device   Wolfgang Wallner
• [PATCH v1 13/43] acpi: Support generation of a device   Bin Meng
• [PATCH v1 14/43] acpi: Support writing named values   Simon Glass
• [PATCH v1 14/43] acpi: Support writing named values   Wolfgang Wallner
• [PATCH v1 14/43] acpi: Support writing named values   Bin Meng
• [PATCH v1 15/43] sound: Add an ACPI driver for Dialog Semicondutor da7219   Simon Glass
• [PATCH v1 15/43] sound: Add an ACPI driver for Dialog Semicondutor da7219   Bin Meng
• [PATCH v1 16/43] sound: Add an ACPI driver for Maxim MAX98357ac   Simon Glass
• [PATCH v1 17/43] x86: pinctrl: Add a way to get the pinctrl reg address   Simon Glass
• [PATCH v1 17/43] x86: pinctrl: Add a way to get the pinctrl reg address   Wolfgang Wallner
• [PATCH v1 17/43] x86: pinctrl: Add a way to get the pinctrl reg address   Bin Meng
• [PATCH v1 18/43] x86: pinctrl: Update comment for intel_pinctrl_get_pad()   Simon Glass
• [PATCH v1 18/43] x86: pinctrl: Update comment for intel_pinctrl_get_pad()   Bin Meng
• [PATCH v1 19/43] x86: pinctrl: Add multi-ACPI control   Simon Glass
• [PATCH v1 19/43] x86: pinctrl: Add multi-ACPI control   Bin Meng
• [PATCH v1 2/2] board: presidio-asic: Add CAxxxx Ethernet support   Alex Nemirovsky
• [PATCH v1 2/4] video: stm32: stm32_dsi: copy DSI fields   Yannick Fertre
• [PATCH v1 2/4] video: stm32: stm32_dsi: copy DSI fields   Patrick DELAUNAY
• [PATCH v1 2/4] video: stm32: stm32_dsi: copy DSI fields   Anatolij Gustschin
• [PATCH v1 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache   Stefan Roese
• [PATCH v1 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache   Daniel Schwierzeck
• [PATCH v1 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache   Stefan Roese
• [PATCH v1 2/6] toradex: common: show boot logo   Igor Opaniuk
• [PATCH v1 2/7] toradex: tdx-cfg-block: add carrier boards and display adapters   Igor Opaniuk
• [PATCH v1 2/9] mips: octeon: Add octeon-model.h header   Stefan Roese
• [PATCH v1 20/43] x86: pinctrl: Set up itss in the probe() method   Simon Glass
• [PATCH v1 20/43] x86: pinctrl: Set up itss in the probe() method   Bin Meng
• [PATCH v1 21/43] x86: pinctrl: Drop the acpi_name member   Simon Glass
• [PATCH v1 21/43] x86: pinctrl: Drop the acpi_name member   Wolfgang Wallner
• [PATCH v1 22/43] x86: Add support for building up an NHLT structure   Simon Glass
• [PATCH v1 23/43] x86: Add error checking for csrt table generation   Simon Glass
• [PATCH v1 23/43] x86: Add error checking for csrt table generation   Bin Meng
• [PATCH v1 24/43] x86: apl: Use memory-mapped access for VBT   Simon Glass
• [PATCH v1 24/43] x86: apl: Use memory-mapped access for VBT   Bin Meng
• [PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO   Simon Glass
• [PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO   Bin Meng
• [PATCH v1 26/43] i2c: designware_i2c: Add a little more debugging   Simon Glass
• [PATCH v1 26/43] i2c: designware_i2c: Add a little more debugging   Wolfgang Wallner
• [PATCH v1 26/43] i2c: designware_i2c: Add a little more debugging   Bin Meng
• [PATCH v1 27/43] i2c: Add log_ret() on error   Simon Glass
• [PATCH v1 27/43] i2c: Add log_ret() on error   Wolfgang Wallner
• [PATCH v1 27/43] i2c: Add log_ret() on error   Bin Meng
• [PATCH v1 28/43] i2c: designware_i2c: Support ACPI table generation   Simon Glass
• [PATCH v1 28/43] i2c: designware_i2c: Support ACPI table generation   Wolfgang Wallner
• [PATCH v1 29/43] p2sb: Add a method to hide the bus   Simon Glass
• [PATCH v1 29/43] p2sb: Add a method to hide the bus   Wolfgang Wallner
• [PATCH v1 29/43] p2sb: Add a method to hide the bus   Bin Meng
• [PATCH v1 3/4] video: raydium_rm68200: fill characteristics of DSI data link   Yannick Fertre
• [PATCH v1 3/4] video: raydium_rm68200: fill characteristics of DSI data link   Patrick DELAUNAY
• [PATCH v1 3/4] video: raydium_rm68200: fill characteristics of DSI data link   Anatolij Gustschin
• [PATCH v1 3/5] mips: octeon: octeon_ebb7304: Change TEXT_BASE to L2 cache   Stefan Roese
• [PATCH v1 3/6] ARM: dts: imx7-colibri: multiple node updates   Igor Opaniuk
• [PATCH v1 3/7] toradex: tdx-cfg-block: add support for EEPROM   Igor Opaniuk
• [PATCH v1 3/9] mips: octeon Add cvmx/cvmx-lmcx-defs.h header   Stefan Roese
• [PATCH v1 30/43] x86: apl: Support set_hide() in p2sb driver   Simon Glass
• [PATCH v1 30/43] x86: apl: Support set_hide() in p2sb driver   Wolfgang Wallner
• [PATCH v1 30/43] x86: apl: Support set_hide() in p2sb driver   Bin Meng
• [PATCH v13 00/19] RISC-V SiFive FU540 support SPL   Jagan Teki
• [PATCH v13 00/19] RISC-V SiFive FU540 support SPL   Rick Chen
• [PATCH v1 31/43] x86: apl: Hide the p2sb on exit from U-Boot   Simon Glass
• [PATCH v1 31/43] x86: apl: Hide the p2sb on exit from U-Boot   Wolfgang Wallner
• [PATCH v1 31/43] x86: apl: Hide the p2sb on exit from U-Boot   Bin Meng
• [PATCH v1 32/43] pmc: Move common registers to the header file   Simon Glass
• [PATCH v1 32/43] pmc: Move common registers to the header file   Wolfgang Wallner
• [PATCH v1 32/43] pmc: Move common registers to the header file   Bin Meng
• [PATCH v1 33/43] x86: irq: Support flags for acpi_gpe   Simon Glass
• [PATCH v1 33/43] x86: irq: Support flags for acpi_gpe   Bin Meng
• [PATCH v1 34/43] x86: apl: Fix save/restore of ITSS priorities   Simon Glass
• [PATCH v1 34/43] x86: apl: Fix save/restore of ITSS priorities   Bin Meng
• [PATCH v1 35/43] x86: Add debugging to table writing   Simon Glass
• [PATCH v1 35/43] x86: Add debugging to table writing   Wolfgang Wallner
• [PATCH v1 35/43] x86: Add debugging to table writing   Bin Meng
• [PATCH v1 36/43] x86: apl: Adjust FSP-M code to avoid hard-coded address   Simon Glass
• [PATCH v1 36/43] x86: apl: Adjust FSP-M code to avoid hard-coded address   Wolfgang Wallner
• [PATCH v1 37/43] x86: Store the coreboot table address in global_data   Simon Glass
• [PATCH v1 37/43] x86: Store the coreboot table address in global_data   Bin Meng
• [PATCH v1 38/43] x86: mp: Allow use of mp_run_on_cpus() without MP   Simon Glass
• [PATCH v1 38/43] x86: mp: Allow use of mp_run_on_cpus() without MP   Bin Meng
• [PATCH v1 39/43] x86: Update the comment about booting for FSP2   Simon Glass
• [PATCH v1 39/43] x86: Update the comment about booting for FSP2   Wolfgang Wallner
• [PATCH v1 39/43] x86: Update the comment about booting for FSP2   Bin Meng
• [PATCH v1 4/4] video: orisetech_otm8009a: fill characteristics of DSI data link   Yannick Fertre
• [PATCH v1 4/4] video: orisetech_otm8009a: fill characteristics of DSI data link   Patrick DELAUNAY
• [PATCH v1 4/4] video: orisetech_otm8009a: fill characteristics of DSI data link   Anatolij Gustschin
• [PATCH v1 4/5] mips: cache: Make invalidate_dcache_range() weak to enable overwrite   Stefan Roese
• [PATCH v1 4/6] colibri-imx6ull: show boot logo   Igor Opaniuk
• [PATCH v1 4/7] toradex: tdx-cfg-clock: add migration routine from PID8   Igor Opaniuk
• [PATCH v1 4/9] mips: octeon: Add octeon_ddr.h header   Stefan Roese
• [PATCH v1 40/43] x86: Drop setup_pcat_compatibility()   Simon Glass
• [PATCH v1 40/43] x86: Drop setup_pcat_compatibility()   Bin Meng
• [PATCH v14 00/20] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v14 01/20] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v14 02/20] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v14 03/20] clk: Fix clk_get_by_* handling of index   Sean Anderson
• [PATCH v14 04/20] clk: Add K210 pll support   Sean Anderson
• [PATCH v14 05/20] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v14 06/20] clk: Add K210 clock support   Sean Anderson
• [PATCH v14 07/20] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v14 08/20] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v14 09/20] reset: Add generic reset driver   Sean Anderson
• [PATCH v1 41/43] x86: acpi: Correct the version of the MADT   Simon Glass
• [PATCH v1 41/43] x86: acpi: Correct the version of the MADT   Bin Meng
• [PATCH v14 10/20] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v14 11/20] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v14 12/20] riscv: Clear pending interrupts before enabling IPIs   Sean Anderson
• [PATCH v14 13/20] riscv: Clean up IPI initialization code   Sean Anderson
• [PATCH v14 14/20] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v14 15/20] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v14 16/20] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v14 17/20] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v14 18/20] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v14 19/20] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v1 42/43] x86: Rename board_final_cleanup() to board_final_init()   Simon Glass
• [PATCH v1 42/43] x86: Rename board_final_cleanup() to board_final_init()   Wolfgang Wallner
• [PATCH v1 42/43] x86: Rename board_final_cleanup() to board_final_init()   Bin Meng
• [PATCH v14 20/20] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v1 43/43] acpi: Enable ACPI table generation by default on x86   Simon Glass
• [PATCH v1 43/43] acpi: Enable ACPI table generation by default on x86   Bin Meng
• [PATCH v1 5/5] mips: octeon: Add empty invalidate_dcache_range()   Stefan Roese
• [PATCH v1 5/6] colibri-imx6ull: fix splash screen logo drawing   Igor Opaniuk
• [PATCH v1 5/7] toradex: tdx-cfg-block: add carrier board info printing   Igor Opaniuk
• [PATCH v1 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)   Stefan Roese
• [PATCH v1 6/6] colibri-imx7: fix splash logo drawing   Igor Opaniuk
• [PATCH v1 6/7] ARM: dts: imx8mm-verdin: eeprom nodes adjustments   Igor Opaniuk
• [PATCH v1 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)   Stefan Roese
• [PATCH v1 7/7] verdin-imx8mm: add EEPROM support for carrier board   Igor Opaniuk
• [PATCH v1 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)   Stefan Roese
• [PATCH v1 8/9] mips: octeon: dram.c: Add RAM driver support   Stefan Roese
• [PATCH v1 9/9] mips: octeon: octeon_ebb7304: Add DDR4 support   Stefan Roese
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Rayagonda Kokatanur
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Stefan Roese
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Rayagonda Kokatanur
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Stefan Roese
• [PATCH v1] imx: mx7: fix DDRC size in A7-M4 mapping table   Igor Opaniuk
• [PATCH v2 0/2] Add support for booting into userspace fastboot   Roman Kovalivskyi
• [PATCH v2 0/2] ARM: at91: Allow running SPL with DTB append   Gregory CLEMENT
• [PATCH v2 0/2] ARM: at91: Allow running SPL with DTB append   Eugen.Hristev at microchip.com
• [PATCH v2 0/2] gpio: Add a managed API   Pratyush Yadav
• [PATCH v2 0/2] gpio: Add a managed API   Simon Glass
• [PATCH v2 0/2] gpio: Add a managed API   Pratyush Yadav
• [PATCH v2 0/2] gpio: Add a managed API   Simon Glass
• [PATCHv2 0/2] omap4: convert panda board to DM   Tero Kristo
• [PATCH v2 0/2] reset: Add a managed API   Pratyush Yadav
• [PATCH v2 0/3] add FIT image support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v2 0/3] stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC   Patrick Delaunay
• [PATCH v2 0/3] Sync UDMA bindings from kernel   Vignesh Raghavendra
• [PATCH v2 0/3] video: sunxi: Convert DM_VIDEO   Jagan Teki
• [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Jan Kiszka
• [PATCH v2 0/4] rockchip: rk3399: Add SPI boot   Jagan Teki
• [PATCH V2 0/5] Add Basic support for R8A774A1 (RZ/G2M)   Adam Ford
• [PATCH v2 0/5] add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v2 0/5] Convert LaCie boards to use DM drivers   Simon Guinot
• [PATCH v2 0/5] Fixes for running U-boot under QEMU/KVM   Ard Biesheuvel
• [PATCH v2 0/5] mips: Improve initial Octeon MIPS64 support   Stefan Roese
• [PATCH v2 0/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v2 0/8] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v2 0/8] efi_loader: secure boot: support intermediate certificates in signature   AKASHI Takahiro
• [PATCH v2 0/8] efi_loader: secure boot: support intermediate certificates in signature   AKASHI Takahiro
• [PATCH v2 0/8] regmap: Add managed API, regmap fields, regmap config   Pratyush Yadav
• [PATCH v2 0/8] revive Theobroma-Systems puma board   Heiko Stuebner
• [PATCH v2 0/9] env: ext4: corrections and add test for env in ext4   Patrick Delaunay
• [PATCH v2 00/10] cmd: Fix 'md' and add a memory-search command   Simon Glass
• [PATCH v2 00/10] new rtc methods, rtc command, and tests   Rasmus Villemoes
• [PATCH v2 00/10] new rtc methods, rtc command, and tests   Simon Glass
• [PATCH v2 00/10] new rtc methods, rtc command, and tests   Rasmus Villemoes
• [PATCH v2 00/10] new rtc methods, rtc command, and tests   Simon Glass
• [PATCH v2 00/10] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v2 00/10] spi: dm-conversion (part2)   Jagan Teki
• [PATCH v2 00/10] spi: dm-conversion (part2)   Jagan Teki
• [PATCH v2 00/11] stm32mp1: activate gpio hog support and add new pinctrl ops   Patrick Delaunay
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Daniel Schwierzeck
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Daniel Schwierzeck
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v2 00/13] armv8: layerscape: spin table relocation fixes and cleanups   Michael Walle
• [PATCHv2 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Zhiqiang Hou
• [PATCHv2 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Priyanka Jain (OSS)
• [PATCH v2 00/14] improve OF_PLATDATA support   Walter Lozano
• [PATCH v2 00/14] improve OF_PLATDATA support   Simon Glass
• [PATCH v2 00/14] improve OF_PLATDATA support   Walter Lozano
• [PATCH v2 00/17] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v2 00/17] efi_loader: rework/improve UEFI secure boot code   AKASHI Takahiro
• [PATCH v2 00/25] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Wolfgang Wallner
• [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Simon Glass
• [PATCHv2 00/36] spi: fsl-espi: Convert eSPI driver to DM   Zhiqiang Hou
• [PATCH v2 00/39] Tidy up the 'bd' command.   Tom Rini
• [PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman   Simon Glass
• [PATCH v2 01/10] pinctrl: Add pinmux property support to pinctrl-generic   Sean Anderson
• [PATCH v2 01/10] pinctrl: Add pinmux property support to pinctrl-generic   Simon Glass
• [PATCH v2 01/10] pinctrl: Add pinmux property support to pinctrl-generic   Sean Anderson
• [PATCH v2 01/10] powerpc: Remove configs/B4420QDS_NAND_defconfig board   Jagan Teki
• [PATCH v2 01/10] Update MEM_SUPPORT_64BIT_DATA to be always defined   Simon Glass
• [PATCH v2 01/11] configs: stm32mp1: activate CONFIG_GPIO_HOG   Patrick Delaunay
• [PATCH v2 01/12] drivers: Descend to drivers/soc unconditionally   Simon Glass
• [PATCH v2 01/13] armv8: layerscape: fix spin-table support   Michael Walle
• [PATCHv2 01/13] net: fsl_pq_mdio: Add the compatible "fsl, gianfar-mdio" support   Zhiqiang Hou
• [PATCH v2 01/14] drivers: rename drivers to match compatible string   Walter Lozano
• [PATCH v2 01/14] drivers: rename drivers to match compatible string   Simon Glass
• [PATCH v2 01/17] common: update_tftp: remove unnecessary build check   AKASHI Takahiro
• [PATCH v2 01/17] efi_loader: change efi objects initialization order   AKASHI Takahiro
• [PATCH v2 01/23] configs: igep00x0: Enable DM_SPI   Enric Balletbo i Serra
• [PATCH v2 01/23] configs: igep00x0: Enable DM_SPI   Jagan Teki
• [PATCH v2 01/25] x86: mp_init: Switch to livetree   Simon Glass
• [PATCH v2 01/25] x86: mp_init: Switch to livetree   Bin Meng
• [PATCHv2 01/31] Convert CONFIG_AM335X_LCD to Kconfig   Tom Rini
• [PATCHv2 01/31] Convert CONFIG_AM335X_LCD to Kconfig   Tom Rini
• [PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Zhiqiang Hou
• [PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Jagan Teki
• [PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Z.q. Hou
• [PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Jagan Teki
• [PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Z.q. Hou
• [PATCH v2 01/49] dm: core Fix long line in device_bind_common()   Simon Glass
• [PATCH v2 01/49] dm: core Fix long line in device_bind_common()   Bin Meng
• [PATCH v2 02/10] cmd: mem: Use a macro to avoid #ifdef in help   Simon Glass
• [PATCH v2 02/10] powerpc: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board   Jagan Teki
• [PATCH v2 02/10] test: pinmux: Add test for pin muxing   Sean Anderson
• [PATCH v2 02/10] test: pinmux: Add test for pin muxing   Simon Glass
• [PATCH v2 02/10] test: pinmux: Add test for pin muxing   Sean Anderson
• [PATCH v2 02/10] test: pinmux: Add test for pin muxing   Simon Glass
• [PATCH v2 02/10] test: pinmux: Add test for pin muxing   Sean Anderson
• [PATCH v2 02/10] test: pinmux: Add test for pin muxing   Simon Glass
• [PATCH v2 02/10] test: pinmux: Add test for pin muxing   Sean Anderson
• [PATCH v2 02/11] board: stm32mp1: update the gpio hog support   Patrick Delaunay
• [PATCH v2 02/13] armv8: layerscape: pretty print info about SMP cores   Michael Walle
• [PATCHv2 02/13] net: tsec: Add the compatible string "gianfar" support   Zhiqiang Hou
• [PATCH v2 02/14] dtoc: add missing code comments   Walter Lozano
• [PATCH v2 02/14] dtoc: add missing code comments   Simon Glass
• [PATCH v2 02/17] dfu: add a hidden reverse-dependency on UPDATE_TFTP   AKASHI Takahiro
• [PATCH v2 02/17] Revert "test: stabilize test_efi_secboot"   AKASHI Takahiro
• [PATCH v2 02/23] am335x: sl50: Enable DM_SPI   Enric Balletbo i Serra
• [PATCH v2 02/23] am335x: sl50: Enable DM_SPI   Jagan Teki
• [PATCH v2 02/25] x86: Move MP code into mp_init   Simon Glass
• [PATCH v2 02/25] x86: Move MP code into mp_init   Bin Meng
• [PATCHv2 02/31] Convert CONFIG_ARCH_MISC_INIT to Kconfig   Tom Rini
• [PATCHv2 02/31] Convert CONFIG_ARCH_MISC_INIT to Kconfig   Tom Rini
• [PATCHv2 02/36] powerpc: dts: t2080: add espi controller node support   Zhiqiang Hou
• [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories   Simon Glass
• [PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories   Bin Meng
• [PATCH v2 03/10] cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Simon Glass
• [PATCH v2 03/10] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
• [PATCH v2 03/10] powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board   Jagan Teki
• [PATCH v2 03/11] gpio: stm32: add ops set_dir_flags   Patrick Delaunay
• [PATCH v2 03/12] mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM   Daniel Schwierzeck
• [PATCH v2 03/13] armv8: layerscape: properly use CPU_RELEASE_ADDR   Michael Walle
• [PATCHv2 03/13] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCH v2 03/14] dtoc: add support to scan drivers   Walter Lozano
• [PATCH v2 03/14] dtoc: add support to scan drivers   Simon Glass
• [PATCH v2 03/14] dtoc: add support to scan drivers   Walter Lozano
• [PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Sughosh Ganu
• [PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Lukasz Majewski
• [PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
• [PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   Lukasz Majewski
• [PATCH v2 03/17] efi_loader: signature: replace debug to EFI_PRINT   AKASHI Takahiro
• [PATCH v2 03/23] am335x: baltos: Enable DM_SPI   Jagan Teki
• [PATCH v2 03/23] am335x: baltos: Enable DM_SPI   Yegor Yefremov
• [PATCH v2 03/23] am335x: baltos: Enable DM_SPI   Jagan Teki
• [PATCH v2 03/25] x86: mp_init: Avoid declarations in header files   Simon Glass
• [PATCH v2 03/25] x86: mp_init: Avoid declarations in header files   Bin Meng
• [PATCHv2 03/31] Convert CONFIG_ARM_PL180_MMCI to Kconfig   Tom Rini
• [PATCHv2 03/31] Convert CONFIG_ARM_PL180_MMCI to Kconfig   Tom Rini
• [PATCHv2 03/36] powerpc: dts: t2080qds: add espi slave nodes support   Zhiqiang Hou
• [PATCH v2 03/49] binman: Output errors to stderr   Simon Glass
• [PATCH v2 03/49] binman: Output errors to stderr   Bin Meng
• [PATCH v2 04/10] display_options: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Simon Glass
• [PATCH v2 04/10] gpio: sifive: Use generic reg read function   Sean Anderson
• [PATCH v2 04/10] powerpc: Remove configs/C29XPCIE_NAND_defconfig board   Jagan Teki
• [PATCH v2 04/11] gpio: stm32: add ops get_dir_flags   Patrick Delaunay
• [PATCH v2 04/12] mips: cache: Make flush_cache() weak to enable overwrite   Daniel Schwierzeck
• [PATCH v2 04/13] armv8: layerscape: move spin table into own module   Michael Walle
• [PATCHv2 04/13] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Zhiqiang Hou
• [PATCH v2 04/14] dtoc: add option to disable warnings   Walter Lozano
• [PATCH v2 04/14] dtoc: add option to disable warnings   Simon Glass
• [PATCH v2 04/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
• [PATCH v2 04/17] efi_loader: variable: replace debug to EFI_PRINT   AKASHI Takahiro
• [PATCH v2 04/23] am335x: igep003x: Enable DM_SPI   Jagan Teki
• [PATCH v2 04/25] x86: mp_init: Switch parameter names in start_aps()   Simon Glass
• [PATCH v2 04/25] x86: mp_init: Switch parameter names in start_aps()   Wolfgang Wallner
• [PATCH v2 04/25] x86: mp_init: Switch parameter names in start_aps()   Bin Meng
• [PATCHv2 04/31] Convert CONFIG_ARMV7_PSCI et al to Kconfig   Tom Rini
• [PATCHv2 04/31] Convert CONFIG_ARMV7_PSCI et al to Kconfig   Tom Warren
• [PATCHv2 04/36] configs: enable espi device module in T2080QDS   Zhiqiang Hou
• [PATCH v2 04/49] binman: cbfs: Fix IFWI typo   Simon Glass
• [PATCH v2 04/49] binman: cbfs: Fix IFWI typo   Bin Meng
• [PATCH v2 05/10] command: Drop #ifdef for MEM_SUPPORT_64BIT_DATA   Simon Glass
• [PATCH v2 05/10] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
• [PATCH v2 05/10] gpio: dw: Fix warnings about casting int to pointer   Tan, Ley Foon
• [PATCH v2 05/10] gpio: dw: Fix warnings about casting int to pointer   Simon Glass
• [PATCH v2 05/10] powerpc: Remove configs/MPC8536DS_36BIT_defconfig board   Jagan Teki
• [PATCH v2 05/11] gpio: stmfx: move function to prepare new ops introduction   Patrick Delaunay
• [PATCH v2 05/12] mips: time: Only compile the weak get_tbclk() when needed   Daniel Schwierzeck
• [PATCH v2 05/13] armv8: layerscape: load function pointer using ADR   Michael Walle
• [PATCHv2 05/13] configs: p1_p2_rdb: Add the default address of vsc7385 firmware   Zhiqiang Hou
• [PATCH v2 05/14] dm: doc: update of-plat with the support for driver aliases   Walter Lozano
• [PATCH v2 05/14] dm: doc: update of-plat with the support for driver aliases   Simon Glass
• [PATCH v2 05/17] dfu: export dfu_list   AKASHI Takahiro
• [PATCH v2 05/17] efi_loader: image_loader: replace debug to EFI_PRINT   AKASHI Takahiro
• [PATCH v2 05/23] siemens: draco: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 05/25] x86: mp_init: Drop the num_cpus static variable   Simon Glass
• [PATCH v2 05/25] x86: mp_init: Drop the num_cpus static variable   Bin Meng
• [PATCHv2 05/31] Convert CONFIG_AT91_GPIO to Kconfig   Tom Rini
• [PATCHv2 05/31] Convert CONFIG_AT91_GPIO to Kconfig   Tom Rini
• [PATCH v2 05/35] acpi: Support generation of ACPI code   Simon Glass
• [PATCH v2 05/35] acpi: Support generation of ACPI code   Wolfgang Wallner
• [PATCH v2 05/35] acpi: Support generation of ACPI code   Wolfgang Wallner
• [PATCHv2 05/36] dts: P1020: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 05/49] binman: Correct the search patch for pylibfdt   Simon Glass
• [PATCH v2 05/49] binman: Correct the search patch for pylibfdt   Bin Meng
• [PATCH v2 06/10] gpio: dw: Add a trailing underscore to generated name   Sean Anderson
• [PATCH v2 06/10] powerpc: Remove P1022DS_36BIT_NAND_defconfig board   Jagan Teki
• [PATCH v2 06/10] rtc: add rtc command   Rasmus Villemoes
• [PATCH v2 06/10] rtc: add rtc command   Simon Glass
• [PATCH v2 06/10] rtc: add rtc command   Rasmus Villemoes
• [PATCH v2 06/10] rtc: add rtc command   Simon Glass
• [PATCH v2 06/10] test: Add a way to check part of a console line or skip it   Simon Glass
• [PATCH v2 06/11] gpio: stmfx: rename function used to change pin configuration   Patrick Delaunay
• [PATCH v2 06/12] mips: traps: Set WG bit in EBase register on Octeon   Daniel Schwierzeck
• [PATCH v2 06/13] armv8: layerscape: fix alignment for spin table   Michael Walle
• [PATCHv2 06/13] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH v2 06/14] core: drop const for struct driver_info   Walter Lozano
• [PATCH v2 06/14] core: drop const for struct driver_info   Simon Glass
• [PATCH v2 06/17] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [PATCH v2 06/17] efi_loader: image_loader: add a check against certificate type of authenticode   AKASHI Takahiro
• [PATCH v2 06/23] siemens: pxm2: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 06/25] x86: mtrr: Fix 'ensable' typo   Simon Glass
• [PATCH v2 06/25] x86: mtrr: Fix 'ensable' typo   Bin Meng
• [PATCHv2 06/31] Convert CONFIG_ATMEL_HLCD to Kconfig   Tom Rini
• [PATCHv2 06/31] Convert CONFIG_ATMEL_HLCD to Kconfig   Tom Rini
• [PATCH v2 06/35] acpi: Support generation of interrupt descriptor   Wolfgang Wallner
• [PATCHv2 06/36] dts: P1020RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 06/49] binman: Specify the toolpath when running test coverage   Simon Glass
• [PATCH v2 07/10] dm: test: Rename test flags to be generic   Simon Glass
• [PATCH v2 07/10] gpio: dw: Return output value when direction is out   Sean Anderson
• [PATCH v2 07/10] gpio: dw: Return output value when direction is out   Tan, Ley Foon
• [PATCH v2 07/10] gpio: dw: Return output value when direction is out   Sean Anderson
• [PATCH v2 07/10] powerpc: Remove T1024QDS_DDR4_SECURE_BOOT_defconfig board   Jagan Teki
• [PATCH v2 07/11] gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg   Patrick Delaunay
• [PATCH v2 07/13] armv8: layerscape: remove determine_mp_bootpg()   Michael Walle
• [PATCHv2 07/13] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCH v2 07/14] core: extend struct driver_info to point to device   Walter Lozano
• [PATCH v2 07/14] core: extend struct driver_info to point to device   Simon Glass
• [PATCH v2 07/17] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [PATCH v2 07/17] efi_loader: image_loader: retrieve authenticode only if it exists   AKASHI Takahiro
• [PATCH v2 07/23] siemens: rut: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 07/25] x86: mp_init: Set up the CPU numbers at the start   Simon Glass
• [PATCH v2 07/25] x86: mp_init: Set up the CPU numbers at the start   Bin Meng
• [PATCHv2 07/31] Convert CONFIG_ATMEL_NAND_HW_PMECC et al to Kconfig   Tom Rini
• [PATCHv2 07/31] Convert CONFIG_ATMEL_NAND_HW_PMECC et al to Kconfig   Tom Rini
• [PATCHv2 07/36] configs: P1020RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 07/49] binman: Add support for calling mkimage   Simon Glass
• [PATCH v2 08/10] console: Always define the console-recording functions   Simon Glass
• [PATCH v2 08/10] led: gpio: Default to using node name if label is absent   Sean Anderson
• [PATCH v2 08/10] led: gpio: Default to using node name if label is absent   Simon Glass
• [PATCH v2 08/10] led: gpio: Default to using node name if label is absent   Sean Anderson
• [PATCH v2 08/10] led: gpio: Default to using node name if label is absent   Simon Glass
• [PATCH v2 08/10] powerpc: Remove T1040QDS_DDR4_defconfig board   Jagan Teki
• [PATCH v2 08/11] gpio: stmfx: add ops set_dir_flag   Patrick Delaunay
• [PATCH v2 08/13] armv8: layerscape: simplify get_spin_tbl_addr() calls   Michael Walle
• [PATCHv2 08/13] configs: P1020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH v2 08/14] dtoc: extend dtoc to use struct driver_info when linking nodes   Walter Lozano
• [PATCH v2 08/14] dtoc: extend dtoc to use struct driver_info when linking nodes   Simon Glass
• [PATCH v2 08/14] dtoc: extend dtoc to use struct driver_info when linking nodes   Walter Lozano
• [PATCH v2 08/17] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH v2 08/17] efi_loader: signature: fix a size check against revocation list   AKASHI Takahiro
• [PATCH v2 08/23] compulab: Drop cm_t54   Jagan Teki
• [PATCH v2 08/25] x86: mp_init: Adjust bsp_init() to return more information   Simon Glass
• [PATCH v2 08/25] x86: mp_init: Adjust bsp_init() to return more information   Bin Meng
• [PATCHv2 08/31] Convert CONFIG_ATMEL_USART to Kconfig   Tom Rini
• [PATCHv2 08/31] Convert CONFIG_ATMEL_USART to Kconfig   Tom Rini
• [PATCHv2 08/36] dts: P2020: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 08/49] binman: Fix a few typos in the entry docs   Simon Glass
• [PATCH v2 08/49] binman: Fix a few typos in the entry docs   Bin Meng
• [PATCH v2 09/10] powerpc: Remove T4160QDS_NAND_defconfig board   Jagan Teki
• [PATCH v2 09/10] riscv: Add pinmux and gpio bindings for Kendryte K210   Sean Anderson
• [PATCH v2 09/10] test: Add a flag for tests that need console recording   Simon Glass
• [PATCH v2 09/11] gpio: stmfx: add ops get_dir_flags   Patrick Delaunay
• [PATCH v2 09/13] armv8: layerscape: make wake_secondary_core_n() static   Michael Walle
• [PATCHv2 09/13] dts: powerpc: p1010rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH v2 09/14] dm: doc: update of-plat with new phandle support   Walter Lozano
• [PATCH v2 09/14] dm: doc: update of-plat with new phandle support   Simon Glass
• [PATCH v2 09/17] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [PATCH v2 09/17] efi_loader: signature: make efi_hash_regions more generic   AKASHI Takahiro
• [PATCH v2 09/23] compulab: Drop cm_t35   Jagan Teki
• [PATCH v2 09/25] x86: cpu: Remove unnecessary #ifdefs   Simon Glass
• [PATCH v2 09/25] x86: cpu: Remove unnecessary #ifdefs   Bin Meng
• [PATCHv2 09/31] bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to Kconfig   Tom Rini
• [PATCHv2 09/31] bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to Kconfig   Tom Rini
• [PATCHv2 09/36] dts: P2020RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build   Simon Glass
• [PATCH v2 09/49] binman: Adjust pylibfdt for incremental build   Bin Meng
• [PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Jagan Teki
• [PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Jagan Teki
• [PATCH v2 1/1] cmd: bootefi: Honor the address & size cells properties correctly   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables   AKASHI Takahiro
• [PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables   AKASHI Takahiro
• [PATCH v2 1/1] fs: error handling in do_load()   Heinrich Schuchardt
• [PATCH v2 1/1] imx: rom api: fix image offset computation   sbabic at denx.de
• [PATCH v2 1/1] power: pmic_pca9450: fix PCA9450A I2C address   Sébastien Szymanski
• [PATCH v2 1/1] power: pmic_pca9450: fix PCA9450A I2C address   Fabio Estevam
• [PATCH v2 1/1] riscv: use log functions in fdt_fixup   Heinrich Schuchardt
• [PATCH v2 1/1] riscv: use log functions in fdt_fixup   Bin Meng
• [PATCH v2 1/1] riscv: use log functions in fdt_fixup   Atish Patra
• [PATCH v2 1/1] spl: fix ext4fs_mount return code handling   Heiko Thiery
• [PATCH v2 1/1] travis-ci: Fix "ResourceWarning: unclosed file"   Stephen Warren
• [PATCH v2 1/1] travis-ci: Fix "ResourceWarning: unclosed file"   Cristian Ciocaltea
• [PATCH v2 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default   Gregory CLEMENT
• [PATCH v2 1/2] arm: dts: bcm283x: Allow UARTs to work before relocation   Simon Glass
• [PATCH V2 1/2] clk: imx8mm: fix clk set parent   Peng Fan
• [PATCH v2 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Simon Glass
• [PATCH v2 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Pratyush Yadav
• [PATCH v2 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Simon Glass
• [PATCH v2 1/2] drivers: reset: Add a managed API to get reset controllers from the DT   Pratyush Yadav
• [PATCH v2 1/2] fastboot: add support for 'reboot fastboot' command   Roman Kovalivskyi
• [PATCH v2 1/2] fastboot: add support for 'reboot fastboot' command   Roman Stratiienko
• [PATCH v2 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v2 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCHv2 1/2] omap4: Copy device tree from Linux 5.7.y   Tero Kristo
• [PATCH v2 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Kever Yang
• [PATCH v2 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Kever Yang
• [PATCH v2 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Mark Kettenis
• [PATCH v2 1/2] tools: k3_gen_x509_cert: Allow selecting early JTAG debug value   Lokesh Vutla
• [PATCH v2 1/3] configs: ns3: enable FIT config   Rayagonda Kokatanur
• [PATCH v2 1/3] dma: ti: Add static PSIL endpoint information   Vignesh Raghavendra
• [PATCH v2 1/3] logos: Add sunxi logo   Jagan Teki
• [PATCH v2 1/3] logos: Add sunxi logo   Maxime Ripard
• [PATCH v2 1/3] logos: Add sunxi logo   Tom Rini
• [PATCH v2 1/3] stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC   Patrick Delaunay
• [PATCH v2 1/3] watchdog: Add support for K3 RTI watchdog   Jan Kiszka
• [PATCH v2 1/3] watchdog: Add support for K3 RTI watchdog   Lokesh Vutla
• [PATCH v2 1/3] watchdog: Add support for K3 RTI watchdog   Jan Kiszka
• [PATCH v2 1/4] Makefile: Drop to handle rkspi image type   Jagan Teki
• [PATCH v2 1/4] Makefile: Drop to handle rkspi image type   Kever Yang
• [PATCH v2 1/4] phy: atheros: ar8035: Fix clock output calculation   Fabio Estevam
• [PATCH v2 1/4] x86: tangier: acpi: Create buffers outside of the methods   Bin Meng
• [PATCH v2 1/4] x86: tangier: acpi: Create buffers outside of the methods   Bin Meng
• [PATCH v2 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK/_WRITETHROUGH   Ard Biesheuvel
• [PATCH v2 1/5] arm: kirkwood: add DT spi0 alias to LaCie boards   Simon Guinot
• [PATCH v2 1/5] arm: kirkwood: add DT spi0 alias to LaCie boards   Tom Rini
• [PATCH v2 1/5] arm: kirkwood: add DT spi0 alias to LaCie boards   Stefan Roese
• [PATCH V2 1/5] ARM: renesas: Add basic R8A774A1 Support   Adam Ford
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Shrikant Kadam
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Jagan Teki
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Kadam
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Jagan Teki
• [PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci   Sagar Kadam
• [PATCH v2 1/5] fdtdec: Fix the types of addr and size in fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v2 1/5] mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code   Stefan Roese
• [PATCH v2 1/6] crypto/fsl: make SEC%u status line consistent   Michael Walle
• [PATCH v2 1/6] crypto/fsl: make SEC%u status line consistent   Horia Geantă
• [PATCH v2 1/6] rock-pi-4: Enable USB3 Host   Jagan Teki
• Re: [PATCH v2 1/6] rock-pi-4: Enable USB3 Host【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 1/8] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin   Heiko Stuebner
• [PATCH v2 1/8] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin   Kever Yang
• [PATCH v2 1/8] configs: ns3: enable pinctrl driver   Rayagonda Kokatanur
• [PATCH v2 1/8] lib: rsa: export rsa_verify_with_pkey()   AKASHI Takahiro
• [PATCH v2 1/8] regmap: Add devm_regmap_init()   Pratyush Yadav
• [PATCH v2 1/9] env: add absolute path at CONFIG_ENV_EXT4_FILE   Patrick Delaunay
• [PATCH v2 1/9] env: add absolute path at CONFIG_ENV_EXT4_FILE   Tom Rini
• [PATCH v2 10/10] cmd: Add a memory-search command   Simon Glass
• [PATCH v2 10/10] powerpc: Remove TWR-P1025_defconfig board   Jagan Teki
• [PATCH v2 10/10] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v2 10/10] test: dm: rtc: add tests of rtc shell command   Rasmus Villemoes
• [PATCH v2 10/11] pinctrl: stmfx: add information on pin configuration   Patrick Delaunay
• [PATCH v2 10/12] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Daniel Schwierzeck
• [PATCH v2 10/12] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH v2 10/13] armv8: layerscape: drop first .ltorg directive in spintable.S   Michael Walle
• [PATCHv2 10/13] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Zhiqiang Hou
• [PATCH v2 10/14] dtoc: update tests to match new platdata   Walter Lozano
• [PATCH v2 10/14] dtoc: update tests to match new platdata   Simon Glass
• [PATCH v2 10/17] efi_loader: capsule: support firmware update   AKASHI Takahiro
• [PATCH v2 10/17] efi_loader: image_loader: verification for all signatures should pass   AKASHI Takahiro
• [PATCH v2 10/17] efi_loader: image_loader: verification for all signatures should pass   Heinrich Schuchardt
• [PATCH v2 10/23] overo: Drop omap3 overo   Jagan Teki
• [PATCH v2 10/25] x86: mp: Support APs waiting for instructions   Simon Glass
• [PATCH v2 10/25] x86: mp: Support APs waiting for instructions   Wolfgang Wallner
• [PATCH v2 10/25] x86: mp: Support APs waiting for instructions   Bin Meng
• [PATCHv2 10/31] Convert CONFIG_BAUDRATE to Kconfig   Tom Rini
• [PATCHv2 10/31] Convert CONFIG_BAUDRATE to Kconfig   Tom Rini
• [PATCHv2 10/36] configs: P2020RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 10/49] binman: Re-enable concurrent tests   Simon Glass
• [PATCH v2 11/11] pinctrl: stm32: add information on pin configuration   Patrick Delaunay
• [PATCH v2 11/13] armv8: layerscape: clean exported symbols in spintable.S   Michael Walle
• [PATCHv2 11/13] configs: P1010RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH v2 11/14] sandbox: Move section u_boot_list to make it RW   Walter Lozano
• [PATCH v2 11/14] sandbox: Move section u_boot_list to make it RW   Simon Glass
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   Sughosh Ganu
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   Sughosh Ganu
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   Sughosh Ganu
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image   Sughosh Ganu
• [PATCH v2 11/17] efi_loader: image_loader: add digest-based verification for signed image   AKASHI Takahiro
• [PATCH v2 11/25] global_data: Add a generic global_data flag for SMP state   Simon Glass
• [PATCH v2 11/25] global_data: Add a generic global_data flag for SMP state   Bin Meng
• [PATCHv2 11/31] Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig   Tom Rini
• [PATCHv2 11/31] Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig   Tom Rini
• [PATCH v2 11/35] acpi: Support generation of I2C descriptor   Simon Glass
• [PATCHv2 11/36] dts: P2041: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 11/49] binman: Use super() instead of specifying parent type   Simon Glass
• [PATCH v2 11/49] binman: Use super() instead of specifying parent type   Bin Meng
• [PATCH v2 12/12] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Daniel Schwierzeck
• [PATCH v2 12/12] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Stefan Roese
• [PATCH v2 12/13] armv8: layerscape: relocate spin table if EFI_LOADER is enabled   Michael Walle
• [PATCH v2 12/13] armv8: layerscape: relocate spin table if EFI_LOADER is enabled   Heinrich Schuchardt
• [PATCH v2 12/13] armv8: layerscape: relocate spin table if EFI_LOADER is enabled   Michael Walle
• [PATCHv2 12/13] dts: powerpc: p2020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH v2 12/14] arm: dts: include gpio nodes for card detect   Walter Lozano
• [PATCH v2 12/14] arm: dts: include gpio nodes for card detect   Simon Glass
• [PATCH v2 12/14] arm: dts: include gpio nodes for card detect   Walter Lozano
• [PATCH v2 12/17] dfu: add dfu_write_by_alt()   AKASHI Takahiro
• [PATCH v2 12/17] test/py: efi_secboot: remove all "re.search"   AKASHI Takahiro
• [PATCH v2 12/23] logicpd: Drop omap3 zoom1   Jagan Teki
• [PATCH v2 12/23] logicpd: Drop omap3 zoom1   Nishanth Menon
• [PATCH v2 12/25] x86: Set the SMP flag when MP init is complete   Simon Glass
• [PATCH v2 12/25] x86: Set the SMP flag when MP init is complete   Bin Meng
• [PATCHv2 12/31] Convert CONFIG_BOOTARGS to Kconfig   Tom Rini
• [PATCHv2 12/31] Convert CONFIG_BOOTARGS to Kconfig   Tom Rini
• [PATCH v2 12/35] acpi: Support generation of SPI descriptor   Wolfgang Wallner
• [PATCHv2 12/36] dts: P2041RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 12/49] binman: Add an etype for external binary blobs   Simon Glass
• [PATCH v2 12/49] binman: Add an etype for external binary blobs   Bin Meng
• [PATCH v2 13/13] armv8: layerscape: rework spin table   Michael Walle
• [PATCHv2 13/13] configs: P2020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH v2 13/14] dtoc: update dtb_platdata to support cd-gpios   Walter Lozano
• [PATCH v2 13/14] dtoc: update dtb_platdata to support cd-gpios   Simon Glass
• [PATCH v2 13/17] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
• [PATCH v2 13/17] efi_loader: add firmware management protocol for raw image   Sughosh Ganu
• [PATCH v2 13/17] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
• [PATCH v2 13/17] efi_loader: add firmware management protocol for raw image   Sughosh Ganu
• [PATCH v2 13/17] test/py: efi_secboot: fix test case 1g of test_authvar   AKASHI Takahiro
• [PATCH v2 13/23] quipos: Drop omap3 cairo   Jagan Teki
• [PATCH v2 13/25] x86: mp: Allow running functions on multiple CPUs   Simon Glass
• [PATCH v2 13/25] x86: mp: Allow running functions on multiple CPUs   Wolfgang Wallner
• [PATCH v2 13/25] x86: mp: Allow running functions on multiple CPUs   Bin Meng
• [PATCHv2 13/31] Convert CONFIG_BCH to Kconfig   Tom Rini
• [PATCHv2 13/31] Convert CONFIG_BCH to Kconfig   Tom Rini
• [PATCHv2 13/36] configs: P2041RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext   Simon Glass
• [PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext   Bin Meng
• [PATCH v2 14/14] dtoc add test for cd-gpios   Walter Lozano
• [PATCH v2 14/14] dtoc add test for cd-gpios   Simon Glass
• [PATCH v2 14/17] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [PATCH v2 14/17] test/py: efi_secboot: split "signed image" test case-1 into two cases   AKASHI Takahiro
• [PATCH v2 14/23] gumstix: Drop duovero   Jagan Teki
• [PATCH v2 14/25] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH v2 14/25] x86: mp: Park CPUs before running the OS   Bin Meng
• [PATCHv2 14/31] Convert CONFIG_BOARD_TYPES to Kconfig   Tom Rini
• [PATCHv2 14/31] Convert CONFIG_BOARD_TYPES to Kconfig   Tom Rini
• [PATCHv2 14/36] dts: P3041: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 14/49] binman: Allow external binaries to be missing   Simon Glass
• [PATCH v2 14/49] binman: Allow external binaries to be missing   Bin Meng
• [PATCH v2 15/17] test/py: efi_secboot: add a test against certificate revocation   AKASHI Takahiro
• [PATCH v2 15/17] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
• [PATCH v2 15/23] ti: Drop panda board   Lokesh Vutla
• [PATCH v2 15/23] ti: Drop panda board   Jagan Teki
• [PATCH v2 15/23] ti: Drop panda board   Peter Robinson
• [PATCH v2 15/23] ti: Drop panda board   Jagan Teki
• [PATCH v2 15/23] ti: Drop panda board   Tom Rini
• [PATCH v2 15/23] ti: Drop panda board   Jagan Teki
• [PATCH v2 15/23] ti: Drop panda board   Peter Robinson
• [PATCH v2 15/23] ti: Drop panda board   Tom Rini
• [PATCH v2 15/25] x86: mp: Add iterators for CPUs   Simon Glass
• [PATCH v2 15/25] x86: mp: Add iterators for CPUs   Bin Meng
• [PATCHv2 15/31] arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to Kconfig   Tom Rini
• [PATCHv2 15/31] arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to Kconfig   Tom Rini
• [PATCHv2 15/36] dts: P3041DS: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 15/49] patman: Update errors and warnings to use stderr   Simon Glass
• [PATCH v2 15/49] patman: Update errors and warnings to use stderr   Bin Meng
• [PATCH v2 16/17] test/py: add a test for efi firmware update capsule of FIT image   AKASHI Takahiro
• [PATCH v2 16/17] test/py: efi_secboot: add a test for multiple signatures   AKASHI Takahiro
• [PATCH v2 16/23] ti: Drop sdp4430 board   Jagan Teki
• [PATCH v2 16/25] x86: mtrr: Use MP calls to list the MTRRs   Simon Glass
• [PATCH v2 16/25] x86: mtrr: Use MP calls to list the MTRRs   Bin Meng
• [PATCHv2 16/31] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig   Tom Rini
• [PATCHv2 16/31] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig   Tom Rini
• [PATCHv2 16/36] configs: P3041DS: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 16/49] binman: Detect when valid images are not produced   Simon Glass
• [PATCH v2 16/49] binman: Detect when valid images are not produced   Bin Meng
• [PATCH v2 17/17] test/py: add a test for uefi firmware update capsule of raw image   AKASHI Takahiro
• [PATCH v2 17/17] test/py: efi_secboot: add a test for verifying with digest of signed image   AKASHI Takahiro
• [PATCH v2 17/23] ti: Drop omap5 uevm   Lokesh Vutla
• [PATCH v2 17/23] ti: Drop omap5 uevm   Jagan Teki
• [PATCH v2 17/25] x86: Don't enable SMP in SPL   Simon Glass
• [PATCH v2 17/25] x86: Don't enable SMP in SPL   Wolfgang Wallner
• [PATCH v2 17/25] x86: Don't enable SMP in SPL   Bin Meng
• [PATCHv2 17/31] Convert CONFIG_BOOTP_DNS2 to Kconfig   Tom Rini
• [PATCHv2 17/31] Convert CONFIG_BOOTP_DNS2 to Kconfig   Tom Rini
• [PATCHv2 17/36] dts: P4080: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 17/49] binman: Allow missing Intel blobs   Simon Glass
• [PATCH v2 17/49] binman: Allow missing Intel blobs   Bin Meng
• [PATCH v2 18/23] birdland: Drop bav335x   Jagan Teki
• [PATCH v2 18/25] x86: coral: Update the memory map   Simon Glass
• [PATCH v2 18/25] x86: coral: Update the memory map   Wolfgang Wallner
• [PATCH v2 18/25] x86: coral: Update the memory map   Bin Meng
• [PATCHv2 18/31] Convert CONFIG_BOUNCE_BUFFER to Kconfig   Tom Rini
• [PATCHv2 18/31] Convert CONFIG_BOUNCE_BUFFER to Kconfig   Tom Rini
• [PATCHv2 18/36] dts: P4080DS: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 18/49] binman: Allow zero-length entries to overlap   Simon Glass
• [PATCH v2 18/49] binman: Allow zero-length entries to overlap   Bin Meng
• [PATCH v2 19/23] gumstix: Drop pepper   Jagan Teki
• [PATCH v2 19/25] x86: mtrr: Update MTRRs on all CPUs   Simon Glass
• [PATCH v2 19/25] x86: mtrr: Update MTRRs on all CPUs   Bin Meng
• [PATCHv2 19/31] Convert CONFIG_BUILD_TARGET to Kconfig   Tom Rini
• [PATCHv2 19/31] Convert CONFIG_BUILD_TARGET to Kconfig   Tom Rini
• [PATCHv2 19/36] configs: P4080DS: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp   Simon Glass
• [PATCH v2 19/49] mkimage: Allow updating the FIT timestamp   Bin Meng
• [PATCH v2 2/2] board: presidio-asic: Add CAxxxx Ethernet support   Alex Nemirovsky
• [PATCH v2 2/2] board: presidio-asic: Add RAW Parallel NAND support   Alex Nemirovsky
• [PATCH V2 2/2] clk: imx8mm: Add qspi clock   Peng Fan
• [PATCH v2 2/2] configs: atmel: cleanup CONFIG_SPL_SEPARATE_BSS   Gregory CLEMENT
• [PATCH v2 2/2] fastboot: add default fastboot_set_reboot_flag implementation   Roman Kovalivskyi
• [PATCH v2 2/2] fastboot: add default fastboot_set_reboot_flag implementation   Roman Stratiienko
• [PATCHv2 2/2] omap4: panda: convert to device model   Tero Kristo
• [PATCH v2 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Kever Yang
• [PATCH v2 2/2] test: gpio: Add tests for the managed API   Simon Glass
• [PATCH v2 2/2] test: reset: Add tests for the managed API   Pratyush Yadav
• [PATCH v2 2/2] test: reset: Add tests for the managed API   Simon Glass
• [PATCH v2 2/3] board: ns3: add FIT image its file   Rayagonda Kokatanur
• [PATCH v2 2/3] dma: ti: k3-udma: Update driver to use static endpoint Data   Vignesh Raghavendra
• [PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node   Atish Patra
• [PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node   Bin Meng
• [PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node   Atish Patra
• [PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node   Bin Meng
• [PATCH v2 2/3] stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent   Patrick Delaunay
• [PATCH v2 2/3] sunxi: Enable splash screen support   Jagan Teki
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Lokesh Vutla
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Lokesh Vutla
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Lokesh Vutla
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Tom Rini
• [PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 2/4] net: fec: Allow the PHY node to be retrieved   Fabio Estevam
• [PATCH v2 2/4] roc-rk3399-pc: Mark default env from SPI   Jagan Teki
• [PATCH v2 2/4] roc-rk3399-pc: Mark default env from SPI   Kever Yang
• [PATCH v2 2/4] x86: tangier: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Bin Meng
• [PATCH v2 2/4] x86: tangier: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Bin Meng
• [PATCH V2 2/5] ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1   Adam Ford
• [PATCH v2 2/5] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Simon Guinot
• [PATCH v2 2/5] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH   Stefan Roese
• [PATCH v2 2/5] arm: qemu: enable LPAE on 32-bit   Ard Biesheuvel
• [PATCH v2 2/5] fdtdec: Honor #address-cells and #size-cells in fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v2 2/5] fu540: prci: use common reset indexes defined in binding header   Sagar Shrikant Kadam
• [PATCH v2 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache   Stefan Roese
• [PATCH v2 2/6] crypto/fsl: export caam_get_era()   Michael Walle
• [PATCH v2 2/6] rock-pi-4: Enable PCI/NVME   Jagan Teki
• [PATCH v2 2/6] rock-pi-4: Enable PCI/NVME   Kever Yang
• [PATCH v2 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator   Heiko Stuebner
• [PATCH v2 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator   Kever Yang
• [PATCH v2 2/8] dt-bindings: pinctrl: add ns3 pads definition   Rayagonda Kokatanur
• [PATCHv2 2/8] imx: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 2/8] lib: crypto: add public_key_verify_signature()   AKASHI Takahiro
• [PATCH v2 2/8] regmap: zero out the regmap on allocation   Pratyush Yadav
• [PATCH v2 2/9] env: ext4: set gd->env_valid   Patrick Delaunay
• [PATCH v2 2/9] env: ext4: set gd->env_valid   Tom Rini
• [PATCH v2 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU   Simon Glass
• [PATCH v2 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU   Wolfgang Wallner
• [PATCH v2 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU   Bin Meng
• [PATCHv2 20/31] Convert CONFIG_CMDLINE_EDITING to Kconfig   Tom Rini
• [PATCHv2 20/31] Convert CONFIG_CMDLINE_EDITING to Kconfig   Tom Rini
• [PATCHv2 20/36] dts: P5040: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 20/49] dtoc: Allow adding variable-sized data to a dtb   Simon Glass
• [PATCH v2 21/23] silica: Drop pengwyn   Jagan Teki
• [PATCH v2 21/25] x86: mtrr: Update the command to use the new mtrr calls   Simon Glass
• [PATCH v2 21/25] x86: mtrr: Update the command to use the new mtrr calls   Bin Meng
• [PATCHv2 21/31] Convert CONFIG_CONS_INDEX to Kconfig   Tom Rini
• [PATCHv2 21/31] Convert CONFIG_CONS_INDEX to Kconfig   Tom Rini
• [PATCH v2 21/35] acpi: Support copying properties from device tree to ACPI   Wolfgang Wallner
• [PATCHv2 21/36] dts: P5040DS: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 21/49] binman: Add support for generating a FIT   Simon Glass
• [PATCH v2 22/25] x86: mtrr: Restructure so command execution is in one place   Simon Glass
• [PATCH v2 22/25] x86: mtrr: Restructure so command execution is in one place   Bin Meng
• [PATCHv2 22/31] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig   Tom Rini
• [PATCHv2 22/31] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig   Igor Opaniuk
• [PATCHv2 22/31] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig   Tom Rini
• [PATCH v2 22/35] acpi: Add support for various misc ACPI opcodes   Wolfgang Wallner
• [PATCHv2 22/36] configs: P5040DS: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works   Simon Glass
• [PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works   Bin Meng
• [PATCH v2 23/25] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU   Simon Glass
• [PATCH v2 23/25] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU   Bin Meng
• [PATCHv2 23/31] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig   Tom Rini
• [PATCHv2 23/31] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig   Tom Rini
• [PATCHv2 23/36] dts: T102x: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 23/49] rockchip: Allow Bob to use SPI boot   Simon Glass
• [PATCH v2 24/25] x86: mp: Add more comments to the module   Simon Glass
• [PATCH v2 24/25] x86: mp: Add more comments to the module   Wolfgang Wallner
• [PATCH v2 24/25] x86: mp: Add more comments to the module   Bin Meng
• [PATCHv2 24/31] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Tom Rini
• [PATCHv2 24/31] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Stefano Babic
• [PATCHv2 24/31] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB   Tom Rini
• [PATCH v2 24/35] acpi: Add support for writing a GPIO power sequence   Wolfgang Wallner
• [PATCHv2 24/36] dts: T1024RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards   Simon Glass
• [PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards   Bin Meng
• [PATCH v2 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Simon Glass
• [PATCHv2 25/31] nxp: Finish switch to CONFIG_NXP_ESBC   Tom Rini
• [PATCHv2 25/31] nxp: Finish switch to CONFIG_NXP_ESBC   Tom Rini
• [PATCH v2 25/35] acpi: Add support for a generic power sequence   Wolfgang Wallner
• [PATCHv2 25/36] configs: T1024RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 25/49] rockchip: jerry: Add serial support   Simon Glass
• [PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Tom Rini
• [PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Stefano Babic
• [PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig   Tom Rini
• [PATCHv2 26/36] dts: T104x: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 26/49] rockchip: bob: Support SPI-flash booting   Simon Glass
• [PATCHv2 27/31] Convert CONFIG_BOOTM_NETBSD to Kconfig   Tom Rini
• [PATCHv2 27/31] Convert CONFIG_BOOTM_NETBSD to Kconfig   Tom Rini
• [PATCH v2 27/35] x86: acpi: Move MADT down a bit   Wolfgang Wallner
• [PATCHv2 27/36] dts: T1042D4RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 27/49] rockchip: Enable building a SPI ROM image on jerry   Simon Glass
• [PATCHv2 28/31] Kconfig: Remove CONFIG_CLOCKS_IN_MHZ   Tom Rini
• [PATCHv2 28/31] Kconfig: Remove CONFIG_CLOCKS_IN_MHZ   Tom Rini
• [PATCH v2 28/35] acpi: Record the items added to SSDT   Wolfgang Wallner
• [PATCHv2 28/36] configs: T1042D4RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 28/49] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• [PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support   Tom Rini
• [PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support   Simon Glass
• [PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support   Luca Ceresoli
• [PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support   Tom Rini
• [PATCH v2 29/35] acpi: Support ordering SSDT data by device   Wolfgang Wallner
• [PATCHv2 29/36] dts: T2080RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 29/49] tegra: Drop the unused non-binman code   Simon Glass
• [PATCH v2 29/49] tegra: Drop the unused non-binman code   Stephen Warren
• [PATCH v2 29/49] tegra: Drop the unused non-binman code   Simon Glass
• [PATCH v2 29/49] tegra: Drop the unused non-binman code   Stephen Warren
• [PATCH v2 3/3] arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT   Vignesh Raghavendra
• [PATCH v2 3/3] arm: dts: k3: Add RTI watchdogs   Jan Kiszka
• [PATCH v2 3/3] board: ns3: add development keys used in FIT   Rayagonda Kokatanur
• [PATCH v2 3/3] configs:stm32mp1: activate env config in SPL   Patrick Delaunay
• [PATCHv2 3/3] net: tsec: Access TBI PHY through the corresponding MII   Priyanka Jain (OSS)
• [PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO   Jagan Teki
• [PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO   Maxime Ripard
• [PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO   Jagan Teki
• [PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO   Michael Nazzareno Trimarchi
• [PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO   Maxime Ripard
• [PATCH v2 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1   Fabio Estevam
• [PATCH v2 3/4] roc-rk3399-pc: Add SPI boot   Jagan Teki
• [PATCH v2 3/4] roc-rk3399-pc: Add SPI boot   Kever Yang
• [PATCH v2 3/4] x86: tangier: acpi: Drop _ADR() where _HID() is present   Bin Meng
• [PATCH v2 3/4] x86: tangier: acpi: Drop _ADR() where _HID() is present   Bin Meng
• [PATCH v2 3/5] arm: kirkwood: switch LaCie boards to sata_mv driver   Simon Guinot
• [PATCH v2 3/5] arm: kirkwood: switch LaCie boards to sata_mv driver   Stefan Roese
• [PATCH v2 3/5] arm: qemu: implement enable_caches()   Ard Biesheuvel
• [PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables   Adam Ford
• [PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables   Marek Vasut
• [PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables   Adam Ford
• [PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables   Marek Vasut
• [PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables   Adam Ford
• [PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables   Marek Vasut
• [PATCH v2 3/5] fu540: dtsi: add reset producer and consumer entries   Sagar Shrikant Kadam
• [PATCH v2 3/5] mips: octeon: octeon_ebb7304: Change TEXT_BASE to L2 cache   Stefan Roese
• [PATCH v2 3/5] test/dm: fdtdec: Add the missing gd declaration   Bin Meng
• [PATCH v2 3/6] crypto/fsl: support newer SEC modules   Michael Walle
• [PATCH v2 3/6] rock-pi-4: Enable USB Gadget   Jagan Teki
• [PATCH v2 3/6] rock-pi-4: Enable USB Gadget   Kever Yang
• [PATCH v2 3/8] configs: ns3: enable BCM IPROC mmc driver   Rayagonda Kokatanur
• [PATCH v2 3/8] lib: crypto: enable x509_check_for_self_signed()   AKASHI Takahiro
• [PATCHv2 3/8] powerpc: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 3/8] regmap: Allow specifying read/write width   Pratyush Yadav
• [PATCH v2 3/8] rockchip: puma: fix indentation for -u-boot.dtsi   Heiko Stuebner
• [PATCH v2 3/8] rockchip: puma: fix indentation for -u-boot.dtsi   Kever Yang
• [PATCH v2 3/9] env: correctly handle result in env_init   Patrick Delaunay
• [PATCH v2 3/9] env: correctly handle result in env_init   Tom Rini
• [PATCH v2 3/9] env: correctly handle result in env_init   Patrick DELAUNAY
• [PATCH v2 3/9] env: correctly handle result in env_init   Tom Rini
• [PATCH v2 3/9] env: correctly handle result in env_init   Patrick DELAUNAY
• [PATCH v2 3/9] env: correctly handle result in env_init   Tom Rini
• [PATCH v2 3/9] env: correctly handle result in env_init   Patrick DELAUNAY
• [PATCH v2 3/9] env: correctly handle result in env_init   Tom Rini
• [PATCHv2 30/31] spi: Update build guard for DM objects to cover SPL/TPL   Tom Rini
• [PATCH v2 30/35] x86: Allow devices to write an SSDT   Wolfgang Wallner
• [PATCHv2 30/36] configs: T2080RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 30/49] tegra: Don't enable binman on ARMv8 SoCs   Simon Glass
• [PATCHv2 31/31] Convert CONFIG_CADENCE_QSPI to Kconfig   Tom Rini
• [PATCHv2 31/31] Convert CONFIG_CADENCE_QSPI to Kconfig   Tom Rini
• [PATCH v2 31/35] acpi: Add support for DSDT generation   Wolfgang Wallner
• [PATCHv2 31/36] dts: T4240: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y   Simon Glass
• [PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y   Bin Meng
• [PATCH v2 32/35] x86: Allow devices to write to DSDT   Wolfgang Wallner
• [PATCHv2 32/36] dts: T4240RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed   Simon Glass
• [PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed   Bin Meng
• [PATCH v2 33/35] pci: Avoid a crash in device_is_on_pci_bus()   Wolfgang Wallner
• [PATCHv2 33/36] configs: T4240RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman   Bin Meng
• [PATCH v2 34/35] dm: acpi: Enhance acpi_get_name()   Wolfgang Wallner
• [PATCHv2 34/36] dts: P1010: Add eSPI controller DT node   Zhiqiang Hou
• [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM   Simon Glass
• [PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM   Bin Meng
• [PATCH v2 35/35] acpi: Add an acpi split command   Wolfgang Wallner
• [PATCHv2 35/36] dts: P1010RDB: Add eSPI slave DT nodes   Zhiqiang Hou
• [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman   Bin Meng
• [PATCHv2 36/36] configs: P1010RDB: Enable eSPI controller and SPI flash DM driver   Zhiqiang Hou
• [PATCH v2 36/49] tegra: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v2 36/49] tegra: Makefile: Drop explicit targets built by binman   Bin Meng
• [PATCH v2 37/49] mediatek: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v2 37/49] mediatek: Makefile: Drop explicit targets built by binman   Bin Meng
• [PATCH v2 38/49] rockchip: Makefile: Drop explicit targets built by binman   Simon Glass
• [PATCH v2 38/49] rockchip: Makefile: Drop explicit targets built by binman   Bin Meng
• [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later   Simon Glass
• [PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later   Bin Meng
• [PATCH v2 4/4] doc: rockchip: Document SPI flash program steps   Jagan Teki
• [PATCH v2 4/4] doc: rockchip: Document SPI flash program steps   Kever Yang
• [PATCH v2 4/4] mx6cuboxi: Convert to DM_ETH   Fabio Estevam
• [PATCH v2 4/4] mx6cuboxi: Convert to DM_ETH   Fabio Estevam
• [PATCH v2 4/4] mx6cuboxi: Convert to DM_ETH   Stefano Babic
• [PATCH v2 4/4] x86: tangier: acpi: Drop _HID() where enumerated by _ADR()   Bin Meng
• [PATCH v2 4/4] x86: tangier: acpi: Drop _HID() where enumerated by _ADR()   Bin Meng
• [PATCH v2 4/5] arm: kirkwood: enable DM_USB for LaCie board   Simon Guinot
• [PATCH v2 4/5] arm: kirkwood: enable DM_USB for LaCie board   Stefan Roese
• [PATCH v2 4/5] arm: qemu: disable the EFI workaround for older GRUB   Ard Biesheuvel
• [PATCH v2 4/5] mips: cache: Make invalidate_dcache_range() weak to enable overwrite   Stefan Roese
• [PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables   Adam Ford
• [PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables   Marek Vasut
• [PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables   Adam Ford
• [PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables   Marek Vasut
• [PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables   Adam Ford
• [PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables   Marek Vasut
• [PATCH v2 4/5] sifive: reset: add DM based reset driver for SiFive SoC's   Sagar Shrikant Kadam
• [PATCH v2 4/5] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout()   Bin Meng
• [PATCH v2 4/6] crypto/fsl: don't regenerate secure keys   Michael Walle
• [PATCH v2 4/6] crypto/fsl: don't regenerate secure keys   Horia Geantă
• [PATCH v2 4/6] crypto/fsl: don't regenerate secure keys   Michael Walle
• [PATCH v2 4/6] rock-pi-4: Enable HDMI output   Jagan Teki
• [PATCH v2 4/6] rock-pi-4: Enable HDMI output   Kever Yang
• [PATCH v2 4/8] configs: ns3: enable mmc commands   Rayagonda Kokatanur
• [PATCH v2 4/8] lib: crypto: import pkcs7_verify.c from linux   AKASHI Takahiro
• [PATCH v2 4/8] regmap: Allow left shifting register offset before access   Pratyush Yadav
• [PATCH v2 4/8] rockchip: puma: fix indentation of misc_init_r   Heiko Stuebner
• [PATCH v2 4/8] rockchip: puma: fix indentation of misc_init_r   Kever Yang
• [PATCHv2 4/8] rockchip: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 4/9] sandbox: activate env in ext4 support   Patrick Delaunay
• [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage   Simon Glass
• [PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage   Bin Meng
• [PATCH v2 41/49] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty   Simon Glass
• [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
• [PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Bin Meng
• [PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman   Simon Glass
• [PATCH v2 44/49] rockchip: Convert evb-rk3229 over to use binman   Simon Glass
• [PATCH v2 44/49] rockchip: Convert evb-rk3229 over to use binman   Bin Meng
• [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script   Simon Glass
• [PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script   Bin Meng
• [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs   Simon Glass
• [PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs   Bin Meng
• [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout   Simon Glass
• [PATCH v2 47/49] x86: chromebook_link64: Correct the image layout   Bin Meng
• [PATCH v2 48/49] x86: chromebook_panther: Correct the image layout   Simon Glass
• [PATCH v2 48/49] x86: chromebook_panther: Correct the image layout   Bin Meng
• [PATCH v2 49/49] x86: chromebook_samus_tpl: Correct the image layout   Simon Glass
• [PATCH v2 49/49] x86: chromebook_samus_tpl: Correct the image layout   Bin Meng
• [PATCH v2 5/5] arm: kirkwood: enable DM_ETH for LaCie board   Simon Guinot
• [PATCH v2 5/5] arm: kirkwood: enable DM_ETH for LaCie board   Stefan Roese
• [PATCH v2 5/5] arm: qemu: override flash accessors to use virtualizable instructions   Ard Biesheuvel
• [PATCH v2 5/5] arm: qemu: override flash accessors to use virtualizable instructions   Ard Biesheuvel
• [PATCH v2 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC   Sagar Shrikant Kadam
• [PATCH v2 5/5] mips: octeon: Add empty invalidate_dcache_range()   Stefan Roese
• [PATCH V2 5/5] mmc: renesas-sdhi: Enable support for R8A774A1   Adam Ford
• [PATCH V2 5/5] mmc: renesas-sdhi: Enable support for R8A774A1   Marek Vasut
• [PATCH v2 5/5] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Michael Walle
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Michael Walle
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Horia Geantă
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Michael Walle
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Horia Geantă
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Horia Geantă
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Michael Walle
• [PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Horia Geantă
• [PATCH v2 5/6] roc-rk3399-pc: Enable USB Gadget   Jagan Teki
• [PATCH v2 5/6] roc-rk3399-pc: Enable USB Gadget   Kever Yang
• [PATCHv2 5/8] arm: ti: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 5/8] configs: ns3: enable gpt commands   Rayagonda Kokatanur
• [PATCH v2 5/8] lib: crypto: add pkcs7_digest()   AKASHI Takahiro
• [PATCH v2 5/8] regmap: Add regmap_init_mem_range()   Pratyush Yadav
• [PATCH v2 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream   Heiko Stuebner
• [PATCH v2 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream   Kever Yang
• [PATCH v2 5/9] sandbox: support the change of env location   Patrick Delaunay
• [PATCH v2 5/9] sandbox: support the change of env location   Simon Glass
• [PATCH v2 5/9] sandbox: support the change of env location   Tom Rini
• [PATCH v2 5/9] sandbox: support the change of env location   Patrick DELAUNAY
• [PATCH v2 5/9] sandbox: support the change of env location   Tom Rini
• [PATCH v2 6/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v2 6/6] crypto/fsl: add RNG support   Horia Geantă
• [PATCH v2 6/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v2 6/6] roc-rk3399-pc: Update ENV offset, size   Jagan Teki
• [PATCH v2 6/6] roc-rk3399-pc: Update ENV offset, size   Kever Yang
• [PATCH v2 6/8] configs: ns3: enable EXT4 and FAT fs support   Rayagonda Kokatanur
• [PATCH v2 6/8] lib: crypto: export and enhance pkcs7_verify_one()   AKASHI Takahiro
• [PATCHv2 6/8] m68k: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 6/8] regmap: Allow devices to specify regmap range start and size in config   Pratyush Yadav
• [PATCH v2 6/8] rockchip: puma: remove separate fit generator   Heiko Stuebner
• [PATCH v2 6/8] rockchip: puma: remove separate fit generator   Kever Yang
• [PATCH v2 6/9] test: environment in ext4   Patrick Delaunay
• [PATCH v2 6/9] test: environment in ext4   Stephen Warren
• [PATCH v2 6/9] test: environment in ext4   Patrick DELAUNAY
• [PATCH v2 7/8] configs: ns3: enable sp805 watchdog driver   Rayagonda Kokatanur
• [PATCH v2 7/8] efi_loader: signature: rework for intermediate certificates support   AKASHI Takahiro
• [PATCHv2 7/8] fu540: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 7/8] regmap: Add support for regmap fields   Pratyush Yadav
• [PATCH v2 7/8] rockchip: puma: drop special handling of usb host regulator   Heiko Stuebner
• [PATCH v2 7/8] rockchip: puma: drop special handling of usb host regulator   Kever Yang
• [PATCH v2 7/9] env: ext4: introduce new function env_ext4_save_buffer   Patrick Delaunay
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Rayagonda Kokatanur
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Stefan Roese
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Rayagonda Kokatanur
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Stefan Roese
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Rayagonda Kokatanur
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Stefan Roese
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Rayagonda Kokatanur
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Stefan Roese
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Rayagonda Kokatanur
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Stefan Roese
• [PATCH v2 8/8] board: ns3: start sp805 watchdog service   Rayagonda Kokatanur
• [PATCHv2 8/8] cubieboard7: Remove ARCH= references from documentation   Tom Rini
• [PATCH v2 8/8] rockchip: puma: enable new usb config options   Heiko Stuebner
• [PATCH v2 8/8] rockchip: puma: enable new usb config options   Philipp Tomsich
• [PATCH v2 8/8] rockchip: puma: enable new usb config options   Kever Yang
• [PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates   AKASHI Takahiro
• [PATCH v2 8/8] test: dm: Add tests for regmap managed API and regmap fields   Pratyush Yadav
• [PATCH v2 8/9] env: ext4: add support of command env erase   Patrick Delaunay
• [PATCH v2 9/9] test: sandbox: add test for erase command   Patrick Delaunay
• [PATCH v2 9/9] test: sandbox: add test for erase command   Simon Glass
• [PATCH v2 9/9] test: sandbox: add test for erase command   Stephen Warren
• [PATCH v2] apalis_imx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH v2] arm64: issue ISB after updating system registers   Volodymyr Babchuk
• [PATCH v2] arm64: issue ISB after updating system registers   Julien Grall
• [PATCH v2] arm64: issue ISB after updating system registers   Bertrand Marquis
• [PATCH v2] arm64: issue ISB after updating system registers   André Przywara
• [PATCH v2] arm64: issue ISB after updating system registers   Masahiro Yamada
• [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression   Fabio Estevam
• [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression   Soeren Moch
• [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression   Fabio Estevam
• [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression   Stefano Babic
• [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression   Tom Rini
• [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression   Tom Rini
• [PATCH v2] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns   Ley Foon Tan
• [PATCH v2] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns   Marek Vasut
• [PATCH v2] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
• [PATCH V2] ARM: omap3_logic boards: Convert to DM_ETH   Lokesh Vutla
• [PATCH v2] arm: socfpga: add board support for ic-automation moritz III   Nico Becker
• [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable   marek.bykowski at gmail.com
• [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable   Marek Bykowski
• [PATCHv2] checkpatch.pl: Add check for defining CONFIG_CMD_xxx via config files   Tom Rini
• [PATCH v2] cmd: add a panic command   Heiko Stuebner
• [PATCH v2] cmd: add a panic command   Tom Rini
• [PATCH v2] colibri_imx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH v2] common: fdt: Remove additional 4k space for fdt allocation   Michal Simek
• [PATCH v2] common: fdt: Remove additional 4k space for fdt allocation   Marek Vasut
• [PATCH v2] common: fdt: Remove additional 4k space for fdt allocation   Michal Simek
• [PATCH v2] common: fdt: Remove additional 4k space for fdt allocation   Stephen Warren
• [PATCH v2] common: fdt: Remove additional 4k space for fdt allocation   Stephen Warren
• [PATCH v2] common: fdt: Remove additional 4k space for fdt allocation   Heinrich Schuchardt
• [PATCH v2] common: fdt: Remove additional 4k space for fdt allocation   Stephen Warren
• [PATCH v2] doc: board: xilinx: zynq.rst: add description how to flash a SD card   Johannes Krottmayer
• [PATCH v2] doc: board: xilinx: zynq.rst: add description how to flash a SD card   Michal Simek
• [PATCH v2] doc: driver-model: fix typo in design.rst   Dario Binacchi
• [PATCH v2] doc: driver-model: fix typo in design.rst   sjg at google.com
• [PATCH v2] doc: log: correct option name CONFIG_LOG_MAX_LEVEL   sjg at google.com
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Jan Kiszka
• [PATCH v2] env: sf: Free the old env_flash   Jagan Teki
• [PATCH v2] env: sf: Free the old env_flash   Pratyush Yadav
• [PATCH v2] Fix MMC access on Sabrelite   Martyn Welch
• [PATCH v2] Fix MMC access on Sabrelite   Jaehoon Chung
• [PATCH v2] Fix MMC access on Sabrelite   Fabio Estevam
• [PATCH v2] Fix MMC access on Sabrelite   Troy Kisky
• [PATCH v2] Fix MMC access on Sabrelite   Martyn Welch
• [PATCH v2] Fix MMC access on Sabrelite   sbabic at denx.de
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Michal Simek
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Simon Glass
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Michal Simek
• [PATCH v2] i2c: eeprom: Use reg property instead of offset and size   Simon Glass
• [PATCH v2] i2c: octeon_i2c: Add I2C controller driver for Octeon   Heiko Schocher
• [PATCH v2] i2c: octeon_i2c: Add I2C controller driver for Octeon   Rayagonda Kokatanur
• [PATCH v2] imx: imx8qm_rom7720_a1: update README   sbabic at denx.de
• [PATCH v2] lz4: fix decompressor on big-endian powerpc   Rasmus Villemoes
• [PATCH v2] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready   haibo.chen at nxp.com
• [PATCH v2] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready   Peng Fan
• [PATCH v2] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH v2] mmc: sdhci: Fix HISPD bit handling   Robin Murphy
• [PATCH v2] mmc: sdhci: Fix HISPD bit handling   Jaehoon Chung
• [PATCH v2] mmc: sdhci: Fix HISPD bit handling   Marc Zyngier
• [PATCH v2] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH v2] net: ping: reset stored IP address   Marek Szyprowski
• [PATCH V2] nvme: Invalidate dcache before submitting admin cmd   Michael Trimarchi
• [PATCH V2] nvme: Invalidate dcache before submitting admin cmd   Bin Meng
• [PATCH V2] nvme: Invalidate dcache before submitting admin cmd   Tom Rini
• [PATCH v2] test/py: test_efi_fit: Update #size-cells to 1   Bin Meng
• [PATCH v2] test/py: test_efi_fit: Update #size-cells to 1   Heinrich Schuchardt
• [PATCH v2] test/py: test_efi_fit: Update #size-cells to 1   Bin Meng
• [PATCH v2] tpm2: tis_spi: add linux compatible fallback string   Bruno Thomsen
• [PATCH v2] tpm2: tis_spi: add linux compatible fallback string   Tom Rini
• [PATCHv2] usb: max3420: add the gadget driver   jassisinghbrar at gmail.com
• [PATCH v2] video: bmp: support 8bits BMP drawing on 24/32 bpp framebuffer   Anatolij Gustschin
• [PATCH v2] video: bmp: support 8bits BMP drawing on 24/32 bpp framebuffer   Anatolij Gustschin
• [PATCH v2] xilinx: versal: Add new versal loadpdi command   Michal Simek
• [PATCH v3 0/2] add optee support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v3 0/2] Assorted fixes related to reserved memory   Atish Patra
• [PATCH v3 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v3 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v3 0/2] imx: support for conga-QMX8 board   Oliver Graute
• [PATCH v3 0/2] log: don't show function by default   Heinrich Schuchardt
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Marek Vasut
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Marek Vasut
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Marek Vasut
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Marek Vasut
• [PATCH v3 0/3] Add support for booting into userspace fastboot   Roman Kovalivskyi
• [PATCH v3 0/4] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v3 0/4] rockchip: rk3399: Add SPI boot   Jagan Teki
• [PATCH v3 0/4] spi: kirkwood: dm-conversion (part4)   Jagan Teki
• [PATCH v3 0/4] spi: kirkwood: dm-conversion (part4)   Chris Packham
• [PATCH v3 0/4] spi: kirkwood: dm-conversion (part4)   Chris Packham
• [PATCH v3 0/4] update clock handler and proper cpu features   Sagar Shrikant Kadam
• [PATCH v3 0/4] update clock handler and proper cpu features   Rick Chen
• [PATCH v3 0/4] update clock handler and proper cpu features   Sagar Kadam
• [PATCH v3 0/5] roc-rk3399-pc: Custom SPL init   Jagan Teki
• [PATCH v3 0/5] rockchip: make it possible to sign the u-boot.itb   Heiko Stuebner
• [PATCH v3 0/5] rockchip: make it possible to sign the u-boot.itb   Simon Glass
• [PATCH V3 0/6] Add Basic support for R8A774A1 (RZ/G2M)   Adam Ford
• [PATCH v3 0/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v3 0/6] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH v3 0/6] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH v3 0/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v3 0/6] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH v3 0/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v3 0/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v3 0/6] drivers: Add a framework for MUX drivers   Pratyush Yadav
• [PATCHv3 0/6] omap4/omap5: convert to DM model   Tero Kristo
• [PATCHv3 0/6] omap4/omap5: convert to DM model   Lokesh Vutla
• [PATCH v3 0/6] riscv: sifive/fu540: SPI boot   Jagan Teki
• [PATCH v3 0/6] riscv: sifive/fu540: SPI boot   Jagan Teki
• [PATCH v3 0/7] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v3 0/8] revive Theobroma-Systems puma board   Heiko Stuebner
• [PATCH v3 00/10] new rtc methods, rtc command, and tests   Rasmus Villemoes
• [PATCH v3 00/10] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCHv3 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH   Zhiqiang Hou
• [PATCH v3 00/14] arm: add support for SoC S5P4418   Stefan Bosch
• [PATCH v3 00/14] env: ext4: corrections and add test for env in ext4   Patrick Delaunay
• [PATCH v3 00/14] improve OF_PLATDATA support   Walter Lozano
• [PATCH v3 00/15] add initial support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v3 00/35] dm: Add programmatic generation of ACPI tables (part B)   Simon Glass
• [PATCHv3 00/36] spi: fsl-espi: Convert eSPI driver to DM   Zhiqiang Hou
• [PATCHv3 00/36] spi: fsl-espi: Convert eSPI driver to DM   Jagan Teki
• [PATCH v3 01/10] pinctrl: Add pinmux property support to pinctrl-generic   Sean Anderson
• [PATCH v3 01/10] rtc: add dm_rtc_read helper and ->read method   Rasmus Villemoes
• [PATCH v3 01/10] rtc: add dm_rtc_read helper and ->read method   Heiko Schocher
• [PATCH v3 01/14] arm: add mach-nexell (header files)   Stefan Bosch
• [PATCH v3 01/14] drivers: rename drivers to match compatible string   Walter Lozano
• [PATCH v3 01/14] env: add absolute path at CONFIG_ENV_EXT4_FILE   Patrick Delaunay
• [PATCH v3 01/15] board: ns3: add support for Broadcom Northstar 3   Rayagonda Kokatanur
• [PATCH v3 01/15] board: ns3: add support for Broadcom Northstar 3   Simon Glass
• [PATCHv3 01/15] net: fsl_mdio: Change to use virtual address   Zhiqiang Hou
• [PATCHv3 01/15] net: fsl_mdio: Change to use virtual address   Vladimir Oltean
• [PATCHv3 01/15] net: fsl_mdio: Change to use virtual address   Z.q. Hou
• [PATCH v3 01/35] dm: core: Add an ACPI name for the root node   Simon Glass
• [PATCHv3 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Zhiqiang Hou
• [PATCHv3 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Jagan Teki
• [PATCHv3 01/36] dm: spi: Convert Freescale ESPI driver to driver model   Z.q. Hou
• [PATCH v3 02/10] rtc: add dm_rtc_write() helper   Rasmus Villemoes
• [PATCH v3 02/10] rtc: add dm_rtc_write() helper   Heiko Schocher
• [PATCH v3 02/10] test: pinmux: Add test for pin muxing   Sean Anderson
• [PATCH v3 02/14] arm: add mach-nexell (all files except header files)   Stefan Bosch
• [PATCH v3 02/14] dtoc: add missing code comments   Walter Lozano
• [PATCH v3 02/14] env: ext4: set gd->env_valid   Patrick Delaunay
• [PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support   Rayagonda Kokatanur
• [PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support   Simon Glass
• [PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support   Rayagonda Kokatanur
• [PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support   Simon Glass
• [PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support   Rayagonda Kokatanur
• [PATCHv3 02/15] net: fsl_mdio: Correct the MII management register block address   Zhiqiang Hou
• [PATCH v3 02/35] acpi: Add a function to get a device path and scope   Simon Glass
• [PATCHv3 02/36] powerpc: dts: t2080: add espi controller node support   Zhiqiang Hou
• [PATCH v3 03/10] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
• [PATCH v3 03/10] rtc: fall back to ->{read, write} if ->{read, write}8 are not provided   Rasmus Villemoes
• [PATCH v3 03/10] rtc: fall back to ->{read,write} if ->{read,write}8 are not provided   Heiko Schocher
• [PATCH v3 03/14] core: add support for U_BOOT_DRIVER_ALIAS   Walter Lozano
• [PATCH v3 03/14] env: sf: avoid space in backend name   Patrick Delaunay
• [PATCH v3 03/14] env: sf: avoid space in backend name   Tom Rini
• [PATCH v3 03/14] gpio: add nexell driver   Stefan Bosch
• [PATCH v3 03/15] configs: ns3: enable clock subsystem   Rayagonda Kokatanur
• [PATCH v3 03/15] configs: ns3: enable clock subsystem   Simon Glass
• [PATCH v3 03/15] configs: ns3: enable clock subsystem   Rayagonda Kokatanur
• [PATCHv3 03/15] net: tsec: convert to use DM_MDIO when DM_ETH enabled   Zhiqiang Hou
• [PATCHv3 03/15] net: tsec: convert to use DM_MDIO when DM_ETH enabled   Vladimir Oltean
• [PATCHv3 03/15] net: tsec: convert to use DM_MDIO when DM_ETH enabled   Z.q. Hou
• [PATCH v3 03/35] acpi: Add a way to check device status   Simon Glass
• [PATCH v3 03/35] acpi: Add a way to check device status   Bin Meng
• [PATCHv3 03/36] powerpc: dts: t2080qds: add espi slave nodes support   Zhiqiang Hou
• [PATCH v3 04/10] gpio: sifive: Use generic reg read function   Sean Anderson
• [PATCH v3 04/10] rtc: pcf2127: provide ->read method   Rasmus Villemoes
• [PATCH v3 04/10] rtc: pcf2127: provide ->read method   Heiko Schocher
• [PATCH v3 04/14] dtoc: add support to scan drivers   Walter Lozano
• [PATCH v3 04/14] env: correctly handle env_load_prio   Patrick Delaunay
• [PATCH v3 04/14] env: correctly handle env_load_prio   Tom Rini
• [PATCH v3 04/14] i2c: add nexell driver   Stefan Bosch
• [PATCH v3 04/15] dt-bindings: memory: ns3: add memory definitions   Rayagonda Kokatanur
• [PATCH v3 04/15] dt-bindings: memory: ns3: add memory definitions   Simon Glass
• [PATCHv3 04/15] net: tsec: Add the compatible string "gianfar" support   Zhiqiang Hou
• [PATCHv3 04/15] net: tsec: Add the compatible string "gianfar" support   Vladimir Oltean
• [PATCHv3 04/15] net: tsec: Add the compatible string "gianfar" support   Z.q. Hou
• [PATCH v3 04/35] irq: Add a method to convert an interrupt to ACPI   Simon Glass
• [PATCH v3 04/35] irq: Add a method to convert an interrupt to ACPI   Bin Meng
• [PATCHv3 04/36] configs: enable espi device module in T2080QDS   Zhiqiang Hou
• [PATCH v3 05/10] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
• [PATCH v3 05/10] rtc: pcf2127: provide ->write method   Rasmus Villemoes
• [PATCH v3 05/10] rtc: pcf2127: provide ->write method   Heiko Schocher
• [PATCH v3 05/14] dtoc: add option to disable warnings   Walter Lozano
• [PATCH v3 05/14] env: nowhere: add .load ops   Patrick Delaunay
• [PATCH v3 05/14] env: nowhere: add .load ops   Tom Rini
• [PATCH v3 05/14] mmc: add nexell driver   Stefan Bosch
• [PATCH v3 05/15] board: ns3: add api to save boot parameters passed from BL31   Rayagonda Kokatanur
• [PATCH v3 05/15] board: ns3: add api to save boot parameters passed from BL31   Simon Glass
• [PATCH v3 05/15] board: ns3: add api to save boot parameters passed from BL31   Rayagonda Kokatanur
• [PATCHv3 05/15] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCH v3 05/35] acpi: Support generation of ACPI code   Simon Glass
• [PATCH v3 05/35] acpi: Support generation of ACPI code   Wolfgang Wallner
• [PATCH v3 05/35] acpi: Support generation of ACPI code   Bin Meng
• [PATCHv3 05/36] dts: P1020: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 06/10] gpio: dw: Add a trailing underscore to generated name   Sean Anderson
• [PATCH v3 06/10] rtc: add rtc command   Rasmus Villemoes
• [PATCH v3 06/10] rtc: add rtc command   Heiko Schocher
• [PATCH v3 06/10] rtc: add rtc command   Simon Glass
• [PATCH v3 06/14] dm: doc: update of-plat with the support for driver aliases   Walter Lozano
• [PATCH v3 06/14] env: the ops driver load becomes mandatory in struct env_driver   Patrick Delaunay
• [PATCH v3 06/14] env: the ops driver load becomes mandatory in struct env_driver   Tom Rini
• [PATCH v3 06/14] pinctrl: add nexell driver   Stefan Bosch
• [PATCH v3 06/15] board: ns3: default reset type to L3   Rayagonda Kokatanur
• [PATCH v3 06/15] board: ns3: default reset type to L3   Simon Glass
• [PATCH v3 06/15] board: ns3: default reset type to L3   Rayagonda Kokatanur
• [PATCHv3 06/15] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Zhiqiang Hou
• [PATCHv3 06/15] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Vladimir Oltean
• [PATCHv3 06/15] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Z.q. Hou
• [PATCH v3 06/35] acpi: Support generation of interrupt descriptor   Simon Glass
• [PATCH v3 06/35] acpi: Support generation of interrupt descriptor   Bin Meng
• [PATCHv3 06/36] dts: P1020RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 07/10] gpio: dw: Return output value when direction is out   Sean Anderson
• [PATCH v3 07/10] rtc: sandbox-rtc: fix set method   Rasmus Villemoes
• [PATCH v3 07/10] rtc: sandbox-rtc: fix set method   Heiko Schocher
• [PATCH v3 07/14] cmd: env: add env load command   Patrick Delaunay
• [PATCH v3 07/14] cmd: env: add env load command   Tom Rini
• [PATCH v3 07/14] core: drop const for struct driver_info   Walter Lozano
• [PATCH v3 07/14] pwm: add driver for nexell   Stefan Bosch
• [PATCHv3 07/15] configs: p1_p2_rdb: Add the default address of vsc7385 firmware   Zhiqiang Hou
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Rayagonda Kokatanur
• [PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address   Simon Glass
• [PATCH v3 07/35] gpio: Add a method to convert a GPIO to ACPI   Simon Glass
• [PATCH v3 07/35] gpio: Add a method to convert a GPIO to ACPI   Bin Meng
• [PATCHv3 07/36] configs: P1020RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 08/10] led: gpio: Default to using node name if label is absent   Sean Anderson
• [PATCH v3 08/10] rtc: i2c_rtc_emul: catch any write to the "reset" register   Rasmus Villemoes
• [PATCH v3 08/10] rtc: i2c_rtc_emul: catch any write to the "reset" register   Heiko Schocher
• [PATCH v3 08/14] cmd: env: add env select command   Patrick Delaunay
• [PATCH v3 08/14] cmd: env: add env select command   Tom Rini
• [PATCH v3 08/14] cmd: env: add env select command   Patrick DELAUNAY
• [PATCH v3 08/14] core: extend struct driver_info to point to device   Walter Lozano
• [PATCH v3 08/14] video: add nexell video driver (soc: displaytop)   Stefan Bosch
• [PATCH v3 08/15] board: ns3: program GIC LPI tables   Rayagonda Kokatanur
• [PATCH v3 08/15] board: ns3: program GIC LPI tables   Simon Glass
• [PATCHv3 08/15] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCHv3 08/15] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Vladimir Oltean
• [PATCHv3 08/15] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Z.q. Hou
• [PATCH v3 08/35] acpi: Support string output   Simon Glass
• [PATCH v3 08/35] acpi: Support string output   Bin Meng
• [PATCHv3 08/36] dts: P2020: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 09/10] riscv: Add pinmux and gpio bindings for Kendryte K210   Sean Anderson
• [PATCH v3 09/10] test: dm: rtc: add test of dm_rtc_read, dm_rtc_write   Rasmus Villemoes
• [PATCH v3 09/10] test: dm: rtc: add test of dm_rtc_read, dm_rtc_write   Heiko Schocher
• [PATCH v3 09/14] configs: sandbox: activate env in ext4 support   Patrick Delaunay
• [PATCH v3 09/14] sandbox: Move section u_boot_list to make it RW   Walter Lozano
• [PATCH v3 09/14] video: add nexell video driver (soc: mlc, mipi)   Stefan Bosch
• [PATCH v3 09/15] configs: ns3: enable GIC ITS LPI table programing   Rayagonda Kokatanur
• [PATCH v3 09/15] configs: ns3: enable GIC ITS LPI table programing   Simon Glass
• [PATCHv3 09/15] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCH v3 09/35] acpi: Support generation of GPIO descriptor   Simon Glass
• [PATCH v3 09/35] acpi: Support generation of GPIO descriptor   Bin Meng
• [PATCHv3 09/36] dts: P2020RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 1/1] phy: add support for stingray PAXB PHY controller   Rayagonda Kokatanur
• [PATCH v3 1/1] phy: add support for stingray PAXB PHY controller   Tom Rini
• [PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Simon Glass
• [PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver   Simon Glass
• [PATCH v3 1/2] log: don't show function by default   Heinrich Schuchardt
• [PATCH v3 1/2] log: don't show function by default   Simon Glass
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Miquel Raynal
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Tom Rini
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Jason Li
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Miquel Raynal
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Miquel Raynal
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Miquel Raynal
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Simon Glass
• [PATCH v3 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v3 1/2] riscv: Do not return error if reserved node already exists   Atish Patra
• [PATCH v3 1/2] riscv: Do not return error if reserved node already exists   Bin Meng
• [PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Mark Kettenis
• [PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Kever Yang
• [PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Mark Kettenis
• Re: [PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399【请注意，邮件由mark.kettenis at sibelius.xs4all.nl代发】   Kever Yang
• [PATCH v3 1/3] fastboot: Extend fastboot_set_reboot_flag with reboot reason   Roman Kovalivskyi
• [PATCH v3 1/3] riscv: Avoid the reserved memory fixup if src and dst point to the same place   Bin Meng
• [PATCH v3 1/3] riscv: Avoid the reserved memory fixup if src and dst point to the same place   Atish Patra
• [PATCH v3 1/4] fu540: prci: add request and free clock handlers   Sagar Shrikant Kadam
• [PATCH v3 1/4] Makefile: Drop to handle rkspi image type   Jagan Teki
• [PATCH v3 1/4] Makefile: Drop to handle rkspi image type   Philipp Tomsich
• [PATCH v3 1/4] Makefile: Drop to handle rkspi image type   Jagan Teki
• [PATCH v3 1/4] mx6cuboxi: enable MMC and eMMC in DT for SPL   sbabic at denx.de
• [PATCH v3 1/4] phy: atheros: ar8035: Fix clock output calculation   Fabio Estevam
• [PATCH v3 1/4] phy: atheros: ar8035: Fix clock output calculation   sbabic at denx.de
• [PATCH v3 1/4] spi: kirkwood: Drop nondm code   Jagan Teki
• [PATCH v3 1/4] sysreset: Add Octeon sysreset driver   Stefan Roese
• [PATCH v3 1/4] sysreset: Add Octeon sysreset driver   Daniel Schwierzeck
• [PATCH v3 1/5] fdtdec: Fix the types of addr and size in fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v3 1/5] imx8mp_evk: spl: drop useless code   Fabio Estevam
• [PATCH v3 1/5] imx8mp_evk: spl: drop useless code   Stefano Babic
• [PATCH v3 1/5] imx8mp_evk: spl: drop useless code   sbabic at denx.de
• [PATCH v3 1/5] rk3399: spl: Add rk_spl_board_init as __weak   Jagan Teki
• [PATCH V3 1/6] ARM: renesas: Add basic R8A774A1 Support   Adam Ford
• [PATCH v3 1/6] crypto/fsl: make SEC%u status line consistent   Michael Walle
• [PATCH v3 1/6] drivers: Add a new framework for multiplexer devices   Pratyush Yadav
• [PATCH v3 1/6] drivers: Add a new framework for multiplexer devices   Simon Glass
• [PATCHv3 1/6] omap4: Copy device tree from Linux 5.7.y   Tero Kristo
• [PATCH v3 1/6] sifive: fu540: Add runtime boot mode detection   Jagan Teki
• [PATCH v3 1/6] sifive: fu540: Add runtime boot mode detection   Bin Meng
• [PATCH v3 1/7] configs: ns3: enable pinctrl driver   Rayagonda Kokatanur
• [PATCH v3 1/8] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin   Heiko Stuebner
• [PATCH v3 10/10] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v3 10/10] test: dm: rtc: add tests of rtc shell command   Rasmus Villemoes
• [PATCH v3 10/10] test: dm: rtc: add tests of rtc shell command   Heiko Schocher
• [PATCH v3 10/14] configs: sandbox: activate command env select and env load   Patrick Delaunay
• [PATCH v3 10/14] dtoc: extend dtoc to use struct driver_info when linking nodes   Walter Lozano
• [PATCH v3 10/14] video: add nexell video driver (soc: lvds, hdmi)   Stefan Bosch
• [PATCHv3 10/15] configs: P1020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH v3 10/15] dt-bindings: memory: ns3: add ddr memory definition   Rayagonda Kokatanur
• [PATCH v3 10/15] dt-bindings: memory: ns3: add ddr memory definition   Simon Glass
• [PATCH v3 10/35] acpi: Support generation of a GPIO/irq for a device   Simon Glass
• [PATCH v3 10/35] acpi: Support generation of a GPIO/irq for a device   Bin Meng
• [PATCHv3 10/36] configs: P2020RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 11/14] dm: doc: update of-plat with new phandle support   Walter Lozano
• [PATCH v3 11/14] test: environment in ext4   Patrick Delaunay
• [PATCH v3 11/14] video: add nexell video driver (soc: dpc, makefile)   Stefan Bosch
• [PATCH v3 11/15] board: ns3: define ddr memory layout   Rayagonda Kokatanur
• [PATCH v3 11/15] board: ns3: define ddr memory layout   Simon Glass
• [PATCHv3 11/15] dts: powerpc: p1010rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH v3 11/35] acpi: Support generation of I2C descriptor   Simon Glass
• [PATCH v3 11/35] acpi: Support generation of I2C descriptor   Bin Meng
• [PATCHv3 11/36] dts: P2041: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 12/14] arm: dts: include gpio nodes for card detect   Walter Lozano
• [PATCH v3 12/14] env: ext4: introduce new function env_ext4_save_buffer   Patrick Delaunay
• [PATCH v3 12/14] video: add nexell video driver (display/video driver)   Stefan Bosch
• [PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory   Rayagonda Kokatanur
• [PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory   Simon Glass
• [PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory   Rayagonda Kokatanur
• [PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory   Simon Glass
• [PATCHv3 12/15] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Zhiqiang Hou
• [PATCHv3 12/15] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Vladimir Oltean
• [PATCHv3 12/15] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Z.q. Hou
• [PATCH v3 12/35] acpi: Support generation of SPI descriptor   Simon Glass
• [PATCH v3 12/35] acpi: Support generation of SPI descriptor   Wolfgang Wallner
• [PATCH v3 12/35] acpi: Support generation of SPI descriptor   Bin Meng
• [PATCHv3 12/36] dts: P2041RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 13/14] arm: add support for SoC s5p4418 (cpu) / nanopi2 board   Stefan Bosch
• [PATCH v3 13/14] dtoc: update dtb_platdata to support cd-gpios   Walter Lozano
• [PATCH v3 13/14] env: ext4: add support of command env erase   Patrick Delaunay
• [PATCHv3 13/15] configs: P1010RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv3 13/15] configs: P1010RDB: Enable DM_ETH config   Vladimir Oltean
• [PATCHv3 13/15] configs: P1010RDB: Enable DM_ETH config   Z.q. Hou
• [PATCH v3 13/15] include/configs: ns3: add env variables for Linux boot   Rayagonda Kokatanur
• [PATCH v3 13/15] include/configs: ns3: add env variables for Linux boot   Simon Glass
• [PATCH v3 13/15] include/configs: ns3: add env variables for Linux boot   Rayagonda Kokatanur
• [PATCH v3 13/35] acpigen: Support writing a length   Simon Glass
• [PATCH v3 13/35] acpigen: Support writing a length   Bin Meng
• [PATCHv3 13/36] configs: P2041RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 14/14] arm: add (default) config for nanopi2 board   Stefan Bosch
• [PATCH v3 14/14] dtoc: add test for cd-gpios   Walter Lozano
• [PATCH v3 14/14] test: sandbox: add test for erase command   Patrick Delaunay
• [PATCHv3 14/15] dts: powerpc: p2020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH v3 14/15] include/configs: ns3: add support for flashing images   Rayagonda Kokatanur
• [PATCH v3 14/15] include/configs: ns3: add support for flashing images   Simon Glass
• [PATCH v3 14/35] acpigen: Support writing a package   Simon Glass
• [PATCH v3 14/35] acpigen: Support writing a package   Bin Meng
• [PATCHv3 14/36] dts: P3041: Add ESPI DT nodes   Zhiqiang Hou
• [PATCHv3 15/15] configs: P2020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCHv3 15/15] configs: P2020RDB: Enable DM_ETH config   Vladimir Oltean
• [PATCHv3 15/15] configs: P2020RDB: Enable DM_ETH config   Z.q. Hou
• [PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform   Rayagonda Kokatanur
• [PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform   Simon Glass
• [PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform   Peter Tyser
• [PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform   Rayagonda Kokatanur
• [PATCH v3 15/35] acpi: Support writing an integer   Simon Glass
• [PATCH v3 15/35] acpi: Support writing an integer   Bin Meng
• [PATCHv3 15/36] dts: P3041DS: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 16/35] acpi: Support writing a string   Simon Glass
• [PATCH v3 16/35] acpi: Support writing a string   Bin Meng
• [PATCHv3 16/36] configs: P3041DS: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 17/35] acpi: Support writing a name   Simon Glass
• [PATCH v3 17/35] acpi: Support writing a name   Bin Meng
• [PATCHv3 17/36] dts: P4080: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 18/35] acpi: Support writing a UUID   Simon Glass
• [PATCH v3 18/35] acpi: Support writing a UUID   Bin Meng
• [PATCHv3 18/36] dts: P4080DS: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 19/35] acpi: Support writing Device Properties objects via _DSD   Simon Glass
• [PATCH v3 19/35] acpi: Support writing Device Properties objects via _DSD   Bin Meng
• [PATCHv3 19/36] configs: P4080DS: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 2/2] board: presidio-asic: Add CAxxxx Ethernet support   Alex Nemirovsky
• [PATCH v3 2/2] board: presidio-asic: Add RAW Parallel NAND support   Alex Nemirovsky
• [PATCH v3 2/2] configs: ns3: enable tee and optee driver   Rayagonda Kokatanur
• [PATCH v3 2/2] log: use BIT() instead of 1 <<   Heinrich Schuchardt
• [PATCH v3 2/2] log: use BIT() instead of 1 <<   Simon Glass
• [PATCH v3 2/2] riscv: Use optimized version of fdtdec_get_addr_size_no_parent   Atish Patra
• [PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Mark Kettenis
• [PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Peter Robinson
• [PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Peter Robinson
• [PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Patrick Wildt
• [PATCH v3 2/3] fastboot: Add support for 'reboot fastboot' command   Roman Kovalivskyi
• [PATCH v3 2/3] riscv: Expand the DT size before copy reserved memory node   Bin Meng
• [PATCH v3 2/3] riscv: Expand the DT size before copy reserved memory node   Atish Patra
• [PATCH v3 2/4] arm: Remove d2net_v2 board   Jagan Teki
• [PATCH v3 2/4] arm: Remove d2net_v2 board   Simon Guinot
• [PATCH v3 2/4] arm: Remove d2net_v2 board   Tom Rini
• [PATCH v3 2/4] arm: Remove d2net_v2 board   Simon Guinot
• [PATCH v3 2/4] arm: Remove d2net_v2 board   Tom Rini
• [PATCH v3 2/4] arm: Remove d2net_v2 board   Simon Guinot
• [PATCH v3 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH v3 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Daniel Schwierzeck
• [PATCH v3 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH v3 2/4] mx6cuboxi: customize board_boot_order to access eMMC   sbabic at denx.de
• [PATCH v3 2/4] net: fec: Allow the PHY node to be retrieved   Fabio Estevam
• [PATCH v3 2/4] net: fec: Allow the PHY node to be retrieved   sbabic at denx.de
• [PATCH v3 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Sagar Shrikant Kadam
• [PATCH v3 2/4] roc-rk3399-pc: Mark default env from SPI   Jagan Teki
• [PATCH v3 2/5] fdtdec: Honor #address-cells and #size-cells in fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v3 2/5] imx8mp_evk: spl: drop timer_init   sbabic at denx.de
• [PATCH v3 2/5] mkimage: fit_image: handle multiple errors when writing signatures   Heiko Stuebner
• [PATCH v3 2/5] rk3399: spl: Print SPL banner after relocation   Jagan Teki
• [PATCH V3 2/6] ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1   Adam Ford
• [PATCH v3 2/6] crypto/fsl: export caam_get_era()   Michael Walle
• [PATCH v3 2/6] dm: board: complete the initialization of the muxes in initr_dm()   Pratyush Yadav
• [PATCH v3 2/6] dm: board: complete the initialization of the muxes in initr_dm()   Simon Glass
• [PATCHv3 2/6] omap4: panda: convert to device model   Tero Kristo
• [PATCH v3 2/6] sifive: fu540: Add Booting from SPI   Jagan Teki
• [PATCH v3 2/6] sifive: fu540: Add Booting from SPI   Bin Meng
• [PATCH v3 2/6] sifive: fu540: Add Booting from SPI   Rick Chen
• [PATCH v3 2/7] dt-bindings: pinctrl: add ns3 pads definition   Rayagonda Kokatanur
• [PATCH v3 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator   Heiko Stuebner
• [PATCH v3 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator   Philipp Tomsich
• [PATCH v3 20/35] acpi: Support writing a GPIO   Simon Glass
• [PATCH v3 20/35] acpi: Support writing a GPIO   Wolfgang Wallner
• [PATCH v3 20/35] acpi: Support writing a GPIO   Bin Meng
• [PATCHv3 20/36] dts: P5040: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 21/35] acpi: Support copying properties from device tree to ACPI   Simon Glass
• [PATCH v3 21/35] acpi: Support copying properties from device tree to ACPI   Wolfgang Wallner
• [PATCH v3 21/35] acpi: Support copying properties from device tree to ACPI   Bin Meng
• [PATCHv3 21/36] dts: P5040DS: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 22/35] acpi: Add support for various misc ACPI opcodes   Simon Glass
• [PATCH v3 22/35] acpi: Add support for various misc ACPI opcodes   Bin Meng
• [PATCHv3 22/36] configs: P5040DS: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 23/35] acpi: Add support for writing a Power Resource   Simon Glass
• [PATCH v3 23/35] acpi: Add support for writing a Power Resource   Bin Meng
• [PATCHv3 23/36] dts: T102x: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 24/35] acpi: Add support for writing a GPIO power sequence   Simon Glass
• [PATCH v3 24/35] acpi: Add support for writing a GPIO power sequence   Bin Meng
• [PATCHv3 24/36] dts: T1024RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 25/35] acpi: Add support for a generic power sequence   Simon Glass
• [PATCHv3 25/36] configs: T1024RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 26/35] acpi: Add support for SSDT generation   Simon Glass
• [PATCH v3 26/35] acpi: Add support for SSDT generation   Bin Meng
• [PATCHv3 26/36] dts: T104x: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 27/35] x86: acpi: Move MADT down a bit   Simon Glass
• [PATCH v3 27/35] x86: acpi: Move MADT down a bit   Bin Meng
• [PATCHv3 27/36] dts: T1042D4RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 28/35] acpi: Record the items added to SSDT   Simon Glass
• [PATCH v3 28/35] acpi: Record the items added to SSDT   Bin Meng
• [PATCHv3 28/36] configs: T1042D4RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 29/35] acpi: Support ordering SSDT data by device   Simon Glass
• [PATCH v3 29/35] acpi: Support ordering SSDT data by device   Wolfgang Wallner
• [PATCH v3 29/35] acpi: Support ordering SSDT data by device   Bin Meng
• [PATCHv3 29/36] dts: T2080RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 3/3] fastboot: Add default fastboot_set_reboot_flag implementation   Roman Kovalivskyi
• [PATCH v3 3/3] fastboot: Add default fastboot_set_reboot_flag implementation   Roman Stratiienko
• [PATCH v3 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE   Bin Meng
• [PATCH v3 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE   Atish Patra
• [PATCH v3 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1   Fabio Estevam
• [PATCH v3 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1   sbabic at denx.de
• [PATCH v3 3/4] db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASH   Jagan Teki
• [PATCH v3 3/4] mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file   Stefan Roese
• [PATCH v3 3/4] mx6cuboxi: enable OF_CONTROL and DM in SPL   sbabic at denx.de
• [PATCH v3 3/4] riscv: cpu: fixes to display proper CPU features   Sagar Shrikant Kadam
• [PATCH v3 3/4] roc-rk3399-pc: Add SPI boot   Jagan Teki
• [PATCH v3 3/4] spl: fit: nand: fix fit loading in case of bad blocks   Michael Nazzareno Trimarchi
• [PATCH v3 3/5] imx8mp_evk: spl: use spl_early_init   sbabic at denx.de
• [PATCH v3 3/5] roc-rk3399-pc: Move leds setup in SPL   Jagan Teki
• [PATCH v3 3/5] test/dm: fdtdec: Add the missing gd declaration   Bin Meng
• [PATCH v3 3/5] test/dm: fdtdec: Add the missing gd declaration   Simon Glass
• [PATCH V3 3/6] clk: renesas: Add R8A774A1 clock tables   Adam Ford
• [PATCH v3 3/6] crypto/fsl: support newer SEC modules   Michael Walle
• [PATCH v3 3/6] drivers: mux: mmio-based syscon mux controller   Pratyush Yadav
• [PATCH v3 3/6] drivers: mux: mmio-based syscon mux controller   Simon Glass
• [PATCH v3 3/6] env: Enable SPI flash env for SiFive FU540   Jagan Teki
• [PATCH v3 3/6] env: Enable SPI flash env for SiFive FU540   Bin Meng
• [PATCH v3 3/6] env: Enable SPI flash env for SiFive FU540   Bin Meng
• [PATCHv3 3/6] omap4: Copy device tree from Linux 5.7.y for SDP4430   Tero Kristo
• [PATCH v3 3/7] configs: ns3: enable BCM IPROC mmc driver   Rayagonda Kokatanur
• [PATCH v3 3/8] rockchip: puma: fix indentation for -u-boot.dtsi   Heiko Stuebner
• [PATCH v3 30/35] x86: Allow devices to write an SSDT   Simon Glass
• [PATCH v3 30/35] x86: Allow devices to write an SSDT   Wolfgang Wallner
• [PATCH v3 30/35] x86: Allow devices to write an SSDT   Bin Meng
• [PATCHv3 30/36] configs: T2080RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 31/35] acpi: Add support for DSDT generation   Simon Glass
• [PATCH v3 31/35] acpi: Add support for DSDT generation   Bin Meng
• [PATCHv3 31/36] dts: T4240: Add ESPI DT nodes   Zhiqiang Hou
• [PATCH v3 32/35] x86: Allow devices to write to DSDT   Simon Glass
• [PATCH v3 32/35] x86: Allow devices to write to DSDT   Wolfgang Wallner
• [PATCH v3 32/35] x86: Allow devices to write to DSDT   Bin Meng
• [PATCHv3 32/36] dts: T4240RDB: Add ESPI slave device node   Zhiqiang Hou
• [PATCH v3 33/35] pci: Avoid a crash in device_is_on_pci_bus()   Simon Glass
• [PATCH v3 33/35] pci: Avoid a crash in device_is_on_pci_bus()   Bin Meng
• [PATCHv3 33/36] configs: T4240RDB: Enable ESPI driver   Zhiqiang Hou
• [PATCH v3 34/35] dm: acpi: Enhance acpi_get_name()   Simon Glass
• [PATCH v3 34/35] dm: acpi: Enhance acpi_get_name()   Bin Meng
• [PATCHv3 34/36] dts: P1010: Add eSPI controller DT node   Zhiqiang Hou
• [PATCH v3 35/35] acpi: Add an acpi command to list/dump generated ACPI items   Simon Glass
• [PATCH v3 35/35] acpi: Add an acpi command to list/dump generated ACPI items   Bin Meng
• [PATCHv3 35/36] dts: P1010RDB: Add eSPI slave DT nodes   Zhiqiang Hou
• [PATCHv3 36/36] configs: P1010RDB: Enable eSPI controller and SPI flash DM driver   Zhiqiang Hou
• [PATCH v3 4/4] arm: Remove netspace_v2 board   Jagan Teki
• [PATCH v3 4/4] arm: Remove netspace_v2 board   Simon Guinot
• [PATCH v3 4/4] doc: rockchip: Document SPI flash program steps   Jagan Teki
• [PATCH v3 4/4] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Stefan Roese
• [PATCH v3 4/4] mx6cuboxi: Convert to DM_ETH   Fabio Estevam
• [PATCH v3 4/4] mx6cuboxi: Convert to DM_ETH   sbabic at denx.de
• [PATCH v3 4/4] mx6cuboxi: remove unused code   sbabic at denx.de
• [PATCH v3 4/4] riscv: cpu: check and append L1 cache to cpu features   Sagar Shrikant Kadam
• [PATCH v3 4/5] imx8mp_evk: spl: no need the code since spl framework could do that   sbabic at denx.de
• [PATCH v3 4/5] rockchip: Separate the reset cause from display cpuinfo   Jagan Teki
• [PATCH v3 4/5] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout()   Bin Meng
• [PATCH v3 4/5] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout()   Simon Glass
• [PATCH v3 4/6] cmd: Add a mux command   Pratyush Yadav
• [PATCH v3 4/6] cmd: Add a mux command   Simon Glass
• [PATCH v3 4/6] crypto/fsl: don't regenerate secure keys   Michael Walle
• [PATCHv3 4/6] omap4: sdp: convert to device model   Tero Kristo
• [PATCH V3 4/6] pinctrl: renesas: Enable R8A774A1 PFC tables   Adam Ford
• [PATCH v3 4/6] sifive: fu540: Mark the default env as SPI flash   Jagan Teki
• [PATCH v3 4/6] sifive: fu540: Mark the default env as SPI flash   Bin Meng
• [PATCH v3 4/7] configs: ns3: enable mmc commands   Rayagonda Kokatanur
• [PATCH v3 4/8] rockchip: puma: fix indentation of misc_init_r   Heiko Stuebner
• [PATCH v3 5/5] imx: imx8mp_evk: fix boot issue   sbabic at denx.de
• [PATCH v3 5/5] roc-rk3399-pc: Set LED only during POR and pwr_key=y   Jagan Teki
• [PATCH v3 5/5] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v3 5/5] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory()   Simon Glass
• [PATCH v3 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Michael Walle
• [PATCH v3 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Heinrich Schuchardt
• [PATCH V3 5/6] mmc: renesas-sdhi: Enable support for R8A774A1   Adam Ford
• [PATCHv3 5/6] omap5: Copy device tree from linux 5.7.y   Tero Kristo
• [PATCH v3 5/6] sandbox: Enable memio operations in board_init   Pratyush Yadav
• [PATCH v3 5/6] sandbox: Enable memio operations in board_init   Simon Glass
• [PATCH v3 5/6] sifive: fu540: Add boot flash script offset, size   Jagan Teki
• [PATCH v3 5/6] sifive: fu540: Add boot flash script offset, size   Bin Meng
• [PATCH v3 5/7] configs: ns3: enable gpt commands   Rayagonda Kokatanur
• [PATCH v3 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream   Heiko Stuebner
• [PATCH v3 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream   Kever Yang
• [PATCH V3 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit   Adam Ford
• [PATCH v3 6/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v3 6/6] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH v3 6/6] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCHv3 6/6] omap5: uevm: convert to device model   Tero Kristo
• [PATCH v3 6/6] sifive: fu540: Enable SF distro bootcmd   Jagan Teki
• [PATCH v3 6/6] sifive: fu540: Enable SF distro bootcmd   Bin Meng
• [PATCH v3 6/6] test: Add tests for the multiplexer framework   Pratyush Yadav
• [PATCH v3 6/7] configs: ns3: enable EXT4 and FAT fs support   Rayagonda Kokatanur
• [PATCH v3 6/8] rockchip: puma: remove separate fit generator   Heiko Stuebner
• [PATCH v3 7/7] configs: ns3: enable sp805 watchdog driver   Rayagonda Kokatanur
• [PATCH v3 7/7] configs: ns3: enable sp805 watchdog driver   Stefan Roese
• [PATCH v3 7/8] rockchip: puma: drop special handling of usb host regulator   Heiko Stuebner
• [PATCH v3 7/8] rockchip: puma: drop special handling of usb host regulator   Philipp Tomsich
• [PATCH v3 8/8] rockchip: puma: enable new usb config options   Heiko Stuebner
• [PATCH v3] arm: socfpga: add board support for ic-automation moritz III   Nico Becker
• [PATCH v3] common: fdt: Remove additional 4k space for fdt allocation   Michal Simek
• [PATCH v3] common: fdt: Remove additional 4k space for fdt allocation   Heinrich Schuchardt
• [PATCH v3] common: fdt: Remove additional 4k space for fdt allocation   Michal Simek
• [PATCH v3] common: fdt: Remove additional 4k space for fdt allocation   Stephen Warren
• [PATCH v3] common: fdt: Remove additional 4k space for fdt allocation   Michal Simek
• [PATCH v3] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left   Jason Wessel
• [PATCH v3] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left   Tom Rini
• [PATCH v3] imx: support for conga-QMX8 board   Oliver Graute
• [PATCH v3] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH v3] mmc: sdhci: Fix HISPD bit handling   Jaehoon Chung
• [PATCH v3] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH v3] spl: allow board_spl_fit_post_load() to fail   Peng Fan
• [PATCH v3] spl: allow board_spl_fit_post_load() to fail   Marek Vasut
• [PATCH v3] spl: allow board_spl_fit_post_load() to fail   Tom Rini
• [PATCH v4 0/2] Calculate SDRAM size for Actions OWL SoCs   Amit Tomer
• [PATCH v4 0/2] Calculate SDRAM size for Actions OWL SoCs   Tom Rini
• [PATCH v4 0/2] log: don't show function by default   Heinrich Schuchardt
• [PATCH v4 0/3] Add support for booting into userspace fastboot   Roman Kovalivskyi
• [PATCHv4 0/3] spi: Split CONFIG_DM_SPI* to CONFIG_{SPL_TPL}DM_SPI*   Zhiqiang Hou
• [PATCH v4 0/4] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [PATCH v4 0/4] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v4 0/4] rockchip: rk3399: Add SPI boot   Jagan Teki
• [PATCH v4 0/4] update clock handler and proper cpu features   Sagar Shrikant Kadam
• [PATCH v4 0/4] update clock handler and proper cpu features   Bin Meng
• [PATCH v4 0/4] update clock handler and proper cpu features   Sagar Kadam
• [PATCH v4 0/4] update clock handler and proper cpu features   Bin Meng
• [PATCH v4 0/5] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Marek Szyprowski
• [PATCH v4 0/5] roc-rk3399-pc: Custom SPL init   Jagan Teki
• [PATCH v4 0/5] TI Ethernet PHY changes   Dan Murphy
• [PATCH v4 0/5] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v4 0/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v4 0/6] patman: Support old Python 3 versions   Simon Glass
• [PATCH v4 0/6] rockchip: make it possible to sign the u-boot.itb   Heiko Stuebner
• [PATCH v4 0/9] USB host support for Raspberry Pi 4 board (64-bit)   Matthias Brugger
• [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v4 00/14] improve OF_PLATDATA support   Walter Lozano
• [PATCH v4 01/12] pinctrl: Add pinmux property support to pinctrl-generic   Sean Anderson
• [PATCH v4 01/14] drivers: rename drivers to match compatible string   Walter Lozano
• [PATCH v4 01/14] drivers: rename drivers to match compatible string   Simon Glass
• [PATCH v4 02/12] pinctrl: Reformat documentation in dm/pinctrl.h   Sean Anderson
• [PATCH v4 02/14] dtoc: add missing code comments   Walter Lozano
• [PATCH v4 02/14] dtoc: add missing code comments   Simon Glass
• [PATCH v4 02/14] dtoc: add missing code comments   Walter Lozano
• [PATCH v4 02/14] dtoc: add missing code comments   Simon Glass
• [PATCH v4 03/12] test: pinmux: Add test for pin muxing   Sean Anderson
• [PATCH v4 03/14] core: add support for U_BOOT_DRIVER_ALIAS   Walter Lozano
• [PATCH v4 03/14] core: add support for U_BOOT_DRIVER_ALIAS   Simon Glass
• [PATCH v4 04/12] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
• [PATCH v4 04/14] dtoc: add support to scan drivers   Walter Lozano
• [PATCH v4 04/14] dtoc: add support to scan drivers   Simon Glass
• [PATCH v4 05/12] gpio: sifive: Use generic reg read function   Sean Anderson
• [PATCH v4 05/14] dtoc: add option to disable warnings   Walter Lozano
• [PATCH v4 05/14] dtoc: add option to disable warnings   Simon Glass
• [PATCH v4 06/12] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
• [PATCH v4 06/14] dm: doc: update of-plat with the support for driver aliases   Walter Lozano
• [PATCH v4 06/14] dm: doc: update of-plat with the support for driver aliases   Simon Glass
• [PATCH v4 07/12] gpio: dw: Add a trailing underscore to generated name   Sean Anderson
• [PATCH v4 07/14] core: drop const for struct driver_info   Walter Lozano
• [PATCH v4 07/14] core: drop const for struct driver_info   Simon Glass
• [PATCH v4 08/12] gpio: dw: Return output value when direction is out   Sean Anderson
• [PATCH v4 08/14] core: extend struct driver_info to point to device   Walter Lozano
• [PATCH v4 08/14] core: extend struct driver_info to point to device   Simon Glass
• [PATCH v4 09/12] led: gpio: Default to using node name if label is absent   Sean Anderson
• [PATCH v4 09/14] sandbox: Move section u_boot_list to make it RW   Walter Lozano
• [PATCH v4 09/14] sandbox: Move section u_boot_list to make it RW   Simon Glass
• [PATCH v4 1/2] log: don't show function by default   Heinrich Schuchardt
• [PATCH v4 1/2] log: don't show function by default   Simon Glass
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Alex Nemirovsky
• [PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs   Ramon Fried
• [PATCH v4 1/3] fastboot: Extend fastboot_set_reboot_flag with reboot reason   Roman Kovalivskyi
• [PATCH v4 1/3] riscv: Avoid the reserved memory fixup if src and dst point to the same place   Bin Meng
• [PATCHv4 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)   Zhiqiang Hou
• [PATCHv4 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)   Priyanka Jain (OSS)
• [PATCHv4 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)   Z.q. Hou
• [PATCH v4 1/3] test/dm: fdtdec: Add the missing gd declaration   Bin Meng
• [PATCH v4 1/4] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Sagar Shrikant Kadam
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Rick Chen
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Sagar Kadam
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Bin Meng
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Rick Chen
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Bin Meng
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Rick Chen
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Sagar Kadam
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Sagar Kadam
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Bin Meng
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Sagar Kadam
• [PATCH v4 1/4] fu540: prci: add request and free clock handlers   Sagar Kadam
• [PATCH v4 1/4] Makefile: Drop to handle rkspi image type   Jagan Teki
• [PATCH v4 1/4] sysreset: Add Octeon sysreset driver   Stefan Roese
• [PATCH v4 1/5] arm: rpi: Add function to trigger VL805's firmware load   Nicolas Saenz Julienne
• [PATCH v4 1/5] net: phy: Add missing kernel doc to phy functions   Tom Rini
• [PATCH v4 1/5] powerpc: move ADDR_MAP to Kconfig   Marek Szyprowski
• [PATCH v4 1/5] powerpc: move ADDR_MAP to Kconfig   Tom Rini
• [PATCH v4 1/5] rockchip: spl: Add spl_board_init   Jagan Teki
• [PATCH v4 1/5] rockchip: spl: Add spl_board_init   Kever Yang
• [PATCH v4 1/6] crypto/fsl: make SEC%u status line consistent   Michael Walle
• [PATCH v4 1/6] imx: mkimage_fit_atf: Fix FIT image if BL31.bin missing   Heiko Stuebner
• [PATCH v4 1/6] patman: Drop unnecessary import in gitutil   Simon Glass
• [PATCH v4 10/12] test: dm: Test for default led naming   Sean Anderson
• [PATCH v4 10/14] dtoc: extend dtoc to use struct driver_info when linking nodes   Walter Lozano
• [PATCH v4 10/14] dtoc: extend dtoc to use struct driver_info when linking nodes   Simon Glass
• [PATCH v4 11/12] riscv: Add pinmux and gpio bindings for Kendryte K210   Sean Anderson
• [PATCH v4 11/14] dm: doc: update of-plat with new phandle support   Walter Lozano
• [PATCH v4 11/14] dm: doc: update of-plat with new phandle support   Simon Glass
• [PATCH v4 12/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v4 12/14] arm: dts: include gpio nodes for card detect   Walter Lozano
• [PATCH v4 12/14] arm: dts: include gpio nodes for card detect   Simon Glass
• [PATCH v4 12/14] arm: dts: include gpio nodes for card detect   Adam Ford
• [PATCH v4 12/14] arm: dts: include gpio nodes for card detect   Adam Ford
• [PATCH v4 12/14] arm: dts: include gpio nodes for card detect   Walter Lozano
• [PATCH v4 13/14] dtoc: update dtb_platdata to support cd-gpios   Walter Lozano
• [PATCH v4 13/14] dtoc: update dtb_platdata to support cd-gpios   Simon Glass
• [PATCH v4 14/14] dtoc: add test for cd-gpios   Walter Lozano
• [PATCH v4 14/14] dtoc: add test for cd-gpios   Simon Glass
• [PATCH v4 2/2] board: presidio-asic: Add CAxxxx Ethernet support   Alex Nemirovsky
• [PATCH v4 2/2] log: use BIT() instead of 1 <<   Heinrich Schuchardt
• [PATCH v4 2/3] fastboot: Add support for 'reboot fastboot' command   Roman Kovalivskyi
• [PATCH v4 2/3] riscv: Expand the DT size before copy reserved memory node   Bin Meng
• [PATCH v4 2/3] riscv: Expand the DT size before copy reserved memory node   Rick Chen
• [PATCHv4 2/3] spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX)   Zhiqiang Hou
• [PATCH v4 2/3] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout()   Bin Meng
• [PATCH v4 2/4] cmd: env: check real location for env info command   Patrick Delaunay
• [PATCH v4 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH v4 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Sagar Shrikant Kadam
• [PATCH v4 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Bin Meng
• [PATCH v4 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Sagar Kadam
• [PATCH v4 2/4] roc-rk3399-pc: Mark default env from SPI   Jagan Teki
• [PATCH v4 2/5] arm: provide a function for boards init code to modify MMU virtual-physical map   Marek Szyprowski
• [PATCH v4 2/5] arm: provide a function for boards init code to modify MMU virtual-physical map   Tom Rini
• [PATCH v4 2/5] net: phy: Fix kernel doc issues in phy.h   Tom Rini
• [PATCH v4 2/5] reset: Add Raspberry Pi 4 firmware reset controller   Nicolas Saenz Julienne
• [PATCH v4 2/5] rk3399: spl: Print SPL banner after relocation   Jagan Teki
• [PATCH v4 2/5] rk3399: spl: Print SPL banner after relocation   Kever Yang
• [PATCH v4 2/6] crypto/fsl: export caam_get_era()   Michael Walle
• [PATCH v4 2/6] mkimage: fit_image: handle multiple errors when writing signatures   Heiko Stuebner
• [PATCH v4 2/6] patman: Avoid circular dependency between command and tools   Simon Glass
• [PATCH v4 3/3] fastboot: Add default fastboot_set_reboot_flag implementation   Roman Kovalivskyi
• [PATCH v4 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE   Bin Meng
• [PATCH v4 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE   Rick Chen
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Zhiqiang Hou
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Jagan Teki
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Tom Rini
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Jagan Teki
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Tom Rini
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Jagan Teki
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Z.q. Hou
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Jagan Teki
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Z.q. Hou
• [PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Lukasz Majewski
• [PATCH v4 3/3] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v4 3/4] configs: sandbox: Enable sub command 'env info'   Patrick Delaunay
• [PATCH v4 3/4] mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file   Stefan Roese
• [PATCH v4 3/4] riscv: cpu: fixes to display proper CPU features   Sagar Shrikant Kadam
• [PATCH v4 3/4] riscv: cpu: fixes to display proper CPU features   Bin Meng
• [PATCH v4 3/4] riscv: cpu: fixes to display proper CPU features   Simon Glass
• [PATCH v4 3/4] roc-rk3399-pc: Add SPI boot   Jagan Teki
• [PATCH v4 3/5] configs: Enable support for reset controllers on RPi4   Nicolas Saenz Julienne
• [PATCH v4 3/5] mmc: bcm283x: fix int to pointer cast   Marek Szyprowski
• [PATCH v4 3/5] net: phy: Add helper routines to set and clear bits   Tom Rini
• [PATCH v4 3/5] roc-rk3399-pc: Move leds setup in SPL   Jagan Teki
• [PATCH v4 3/5] roc-rk3399-pc: Move leds setup in SPL   Kever Yang
• [PATCH v4 3/6] crypto/fsl: support newer SEC modules   Michael Walle
• [PATCH v4 3/6] patman: Use a dict in gitutil to avoid importing series   Simon Glass
• [PATCH v4 3/6] spl: fit: dont set U_BOOT_ITS var if not build SPL_FIT support   Heiko Stuebner
• [PATCH v4 4/4] doc: rockchip: Document SPI flash program steps   Jagan Teki
• [PATCH v4 4/4] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Stefan Roese
• [PATCH v4 4/4] riscv: cpu: check and append L1 cache to cpu features   Sagar Shrikant Kadam
• [PATCH v4 4/4] riscv: cpu: check and append L1 cache to cpu features   Bin Meng
• [PATCH v4 4/4] riscv: cpu: check and append L1 cache to cpu features   Sagar Kadam
• [PATCH v4 4/4] test: env: add test for env info sub-command   Patrick Delaunay
• [PATCH v4 4/4] test: env: add test for env info sub-command   Stephen Warren
• [PATCH v4 4/4] test: env: add test for env info sub-command   Patrick DELAUNAY
• [PATCH v4 4/4] test: env: add test for env info sub-command   Stephen Warren
• [PATCH v4 4/4] test: env: add test for env info sub-command   Patrick DELAUNAY
• [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge   Nicolas Saenz Julienne
• [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge   Simon Glass
• [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge   Nicolas Saenz Julienne
• [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge   Simon Glass
• [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge   Nicolas Saenz Julienne
• [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge   Simon Glass
• [PATCH v4 4/5] net: phy: Add support for TI PHY init   Tom Rini
• [PATCH v4 4/5] rockchip: Separate the reset cause from display cpuinfo   Jagan Teki
• [PATCH v4 4/5] rockchip: Separate the reset cause from display cpuinfo   Kever Yang
• [PATCH v4 4/5] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [PATCH v4 4/6] crypto/fsl: don't regenerate secure keys   Michael Walle
• [PATCH v4 4/6] patman: Pass in maintainer dirs to avoid and import   Simon Glass
• [PATCH v4 4/6] spl: fit: enable signing a generated u-boot.itb   Heiko Stuebner
• [PATCH v4 5/5] config: Enable support for the XHCI controller on RPI4 board   Marek Szyprowski
• [PATCH v4 5/5] net: phy: Add DP8382x phy registration to TI PHY init   Tom Rini
• [PATCH v4 5/5] roc-rk3399-pc: Set LED only during POR and pwr_key=y   Jagan Teki
• [PATCH v4 5/5] usb: xhci-pci: Add reset controller support   Nicolas Saenz Julienne
• [PATCH v4 5/5] usb: xhci-pci: Add reset controller support   Marek Vasut
• [PATCH v4 5/5] usb: xhci-pci: Add reset controller support   Nicolas Saenz Julienne
• [PATCH v4 5/6] crypto/fsl: instantiate the RNG with prediciton resistance   Michael Walle
• [PATCH v4 5/6] patman: Avoid importing gitutil in settings   Simon Glass
• [PATCH v4 5/6] spl: fit: add Kconfig option to specify key-hint for fit_generator   Heiko Stuebner
• [PATCH v4 6/6] crypto/fsl: add RNG support   Michael Walle
• [PATCH v4 6/6] crypto/fsl: add RNG support   Heinrich Schuchardt
• [PATCH v4 6/6] patman: Drop import of test_util in test_util   Simon Glass
• [PATCH v4 6/6] rockchip: make_fit_atf: add signature handling   Heiko Stuebner
• [PATCH v4 6/6] rockchip: make_fit_atf: add signature handling   Simon Glass
• [PATCH v4 6/6] rockchip: make_fit_atf: add signature handling   Tom Rini
• [PATCH v4 6/6] rockchip: make_fit_atf: add signature handling   Heiko Stübner
• [PATCH v4 6/6] rockchip: make_fit_atf: add signature handling   Tom Rini
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Peng Fan
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Jaehoon Chung
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Jaehoon Chung
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Peng Fan
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Jaehoon Chung
• [PATCH v4] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH v4] net: tftp: Add client support for RFC 7440   Ravik Hasija
• [PATCH v4] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH v4] net: tftp: Add client support for RFC 7440   Ravik Hasija
• [PATCHv5 0/3] spi: Split CONFIG_DM_SPI* to CONFIG_{SPL_TPL}DM_SPI*   Zhiqiang Hou
• [PATCH v5 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v5 0/5] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [PATCH v5 0/6] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Marek Szyprowski
• [PATCH v5 0/6] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Matthias Brugger
• [PATCH v5 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v5 01/21] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v5 02/21] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v5 03/21] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v5 04/21] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection   Pratyush Yadav
• [PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection   Chris Packham
• [PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection   Pratyush Yadav
• [PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection   Tan, Ley Foon
• [PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection   Pratyush Yadav
• [PATCH v5 06/21] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v5 07/21] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v5 08/21] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v5 09/21] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCHv5 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)   Zhiqiang Hou
• [PATCHv5 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)   Tom Rini
• [PATCH v5 1/4] arm: rpi: Add function to trigger VL805's firmware load   Nicolas Saenz Julienne
• [PATCH v5 1/5] stm32mp1: use the command env info in env_check   Patrick Delaunay
• [PATCH v5 1/6] powerpc: move ADDR_MAP to Kconfig   Marek Szyprowski
• [PATCH v5 10/21] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v5 11/21] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D   Pratyush Yadav
• [PATCH v5 12/21] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v5 13/21] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v5 14/21] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode   Pratyush Yadav
• [PATCH v5 15/21] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v5 16/21] mtd: spi-nor-core: Do not make invalid quad enable fatal   Pratyush Yadav
• [PATCH v5 17/21] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT   Pratyush Yadav
• [PATCH v5 18/21] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v5 19/21] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCHv5 2/3] spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX)   Zhiqiang Hou
• [PATCHv5 2/3] spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX)   Tom Rini
• [PATCH v5 2/4] reset: Add Raspberry Pi 4 firmware reset controller   Nicolas Saenz Julienne
• [PATCH v5 2/5] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [PATCH v5 2/6] arm: update comments to the common style   Marek Szyprowski
• [PATCH v5 2/6] arm: update comments to the common style   Tom Rini
• [PATCH v5 20/21] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [PATCH v5 21/21] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Pratyush Yadav
• [PATCH v5 3/3] riscv: cpu: check and append L1 cache to cpu features   Bin Meng
• [PATCH v5 3/3] riscv: cpu: check and append L1 cache to cpu features   Sagar Kadam
• [PATCHv5 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Zhiqiang Hou
• [PATCHv5 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*   Tom Rini
• [PATCH v5 3/4] configs: Enable support for reset controllers on RPi4   Nicolas Saenz Julienne
• [PATCH v5 3/5] cmd: env: check real location for env info command   Patrick Delaunay
• [PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map   Marek Szyprowski
• [PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map   Tom Rini
• [PATCH v5 4/4] usb: xhci: Add reset controller support   Nicolas Saenz Julienne
• [PATCH v5 4/4] usb: xhci: Add reset controller support   Marek Vasut
• [PATCH v5 4/4] usb: xhci: Add reset controller support   Nicolas Saenz Julienne
• [PATCH v5 4/4] usb: xhci: Add reset controller support   Marek Vasut
• [PATCH v5 4/5] configs: sandbox: Enable sub command 'env info'   Patrick Delaunay
• [PATCH v5 4/6] mmc: bcm283x: fix int to pointer cast   Marek Szyprowski
• [PATCH v5 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Heinrich Schuchardt
• [PATCH v5 5/5] test: env: add test for env info sub-command   Patrick Delaunay
• [PATCH v5 5/6] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [PATCH v5 6/6] config: Enable support for the XHCI controller on RPI4 board   Marek Szyprowski
• [PATCHv5][1/2] rockchip: rk3328: add rock-pi-e dts file   Kever Yang
• [PATCHv5][ 1/7] board: tbs2910: disable loadb and loads commands   Tom Rini
• [PATCHv5][2/2] rockchip: rk3328: add rock-pi-e-rk3328_defconfig file   Kever Yang
• [PATCHv5][ 2/7] board: tbs2910: disable CONFIG_GZIP   Tom Rini
• [PATCHv5][ 3/7] board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig   Tom Rini
• [PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions   Denis 'GNUtoo' Carikli
• [PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions   Soeren Moch
• [PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions   Tom Rini
• [PATCHv5][ 6/7] board: tbs2910: Enable distro_boot support.   Tom Rini
• [PATCHv5][ 7/7] board: tbs2910: add documentation   Denis 'GNUtoo' Carikli
• [PATCHv5][ 7/7] board: tbs2910: add documentation   Soeren Moch
• [PATCHv5][ 7/7] board: tbs2910: add documentation   Tom Rini
• [PATCHv5][ 7/7] board: tbs2910: add documentation   Fabio Estevam
• [PATCH v6 0/4] update clock handler and proper cpu features   Sagar Shrikant Kadam
• [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v6 00/16] Add Rockchip RK3399 USB3.0 Host support   Kever Yang
• [PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v6 01/21] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v6 02/21] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v6 03/21] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v6 04/21] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v6 05/21] arm: mvebu: x530: Disable smart hwcaps selection   Pratyush Yadav
• [PATCH v6 06/21] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v6 07/21] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v6 08/21] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v6 09/21] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCH v6 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Walter Lozano
• [PATCH v6 1/4] arm: rpi: Add function to trigger VL805's firmware load   Nicolas Saenz Julienne
• [PATCH v6 1/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Sagar Shrikant Kadam
• [PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Heiko Stuebner
• [PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Simon Glass
• [PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Heiko Stübner
• [PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Heinrich Schuchardt
• [PATCH v6 10/21] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v6 11/21] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D   Pratyush Yadav
• [PATCH v6 12/21] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v6 13/21] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v6 14/21] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode   Pratyush Yadav
• [PATCH v6 15/21] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v6 16/21] mtd: spi-nor-core: Do not make invalid quad enable fatal   Pratyush Yadav
• [PATCH v6 17/21] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT   Pratyush Yadav
• [PATCH v6 18/21] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v6 19/21] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v6 2/4] reset: Add Raspberry Pi 4 firmware reset controller   Nicolas Saenz Julienne
• [PATCH v6 2/4] uclass: cpu: fix to display proper CPU features   Sagar Shrikant Kadam
• [PATCH v6 2/4] uclass: cpu: fix to display proper CPU features   Bin Meng
• [PATCH v6 2/4] uclass: cpu: fix to display proper CPU features   Sagar Kadam
• [PATCH v6 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Heiko Stuebner
• [PATCH v6 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Simon Glass
• [PATCH v6 20/21] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [PATCH v6 21/21] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Pratyush Yadav
• [PATCH v6 3/4] configs: Enable support for reset controllers on RPi4   Nicolas Saenz Julienne
• [PATCH v6 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit   Sagar Shrikant Kadam
• [PATCH v6 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit   Bin Meng
• [PATCH v6 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit   Sagar Kadam
• [PATCH v6 3/8] lib: rsa: bring exp_len in line when generating a key_prop   Heiko Stuebner
• [PATCH v6 3/8] lib: rsa: bring exp_len in line when generating a key_prop   Simon Glass
• [PATCH v6 4/4] riscv: cpu: check and append L1 cache to cpu features   Sagar Shrikant Kadam
• [PATCH v6 4/4] usb: xhci: Add reset controller support   Nicolas Saenz Julienne
• [PATCH v6 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Heiko Stuebner
• [PATCH v6 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Simon Glass
• [PATCH v6 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop()   Heiko Stuebner
• [PATCH v6 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop()   Simon Glass
• [PATCH v6 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations   Heiko Stuebner
• [PATCH v6 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations   Simon Glass
• [PATCH v6 7/8] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH v6 7/8] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE   Simon Glass
• [PATCH v6 8/8] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH v6 8/8] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE   Simon Glass
• [PATCH v7 0/2] dm: uclass: don't assign aliased seq numbers   Michael Walle
• [PATCH v7 0/4] update clock handler and proper cpu features   Sagar Shrikant Kadam
• [PATCH v7 1/3] usb: provide a device tree node to USB devices   Michael Walle
• [PATCH v7 1/3] usb: provide a device tree node to USB devices   sjg at google.com
• [PATCH v7 1/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Sagar Shrikant Kadam
• [PATCH v7 2/3] dm: core: fix dev_read_alias_highest_id() without libfdt   Michael Walle
• [PATCH v7 2/3] dm: core: fix dev_read_alias_highest_id() without libfdt   Simon Glass
• [PATCH v7 2/3] dm: core: fix dev_read_alias_highest_id() without libfdt   sjg at google.com
• [PATCH v7 2/4] uclass: cpu: fix to display proper CPU features   Sagar Shrikant Kadam
• [PATCH v7 3/3] dm: uclass: don't assign aliased seq numbers   Michael Walle
• [PATCH v7 3/3] dm: uclass: don't assign aliased seq numbers   sjg at google.com
• [PATCH v7 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit   Sagar Shrikant Kadam
• [PATCH v7 4/4] riscv: cpu: check and append L1 cache to cpu features   Sagar Shrikant Kadam
• [PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver   Alex Nemirovsky
• [PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver   Peng Fan
• [PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver   Alex Nemirovsky
• [PATCH v8 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Jagan Teki
• [PATCH v8 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v8 2/2] board: presidio-asic: Add SPI NOR support   Jagan Teki
• [PATCH v8 2/2] board: presidio-asic: Add SPI NOR support   Alex Nemirovsky
• [PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Heiko Schocher
• [PATCH v9 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v9 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v9 2/2] board: presidio-asic: Add I2C support   Alex Nemirovsky
• [PATCH v9 2/2] board: presidio-asic: Add SPI NOR support   Alex Nemirovsky
• [PULL] please pull u-boot-mmc mmc-2020-6-24   Peng Fan
• [PULL] please pull u-boot-mmc mmc-2020-6-24   Tom Rini
• [PULL] Pull request: u-boot-stm32 for v2020.07: u-boot-stm32-20200528   Tom Rini
• [PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200616   Patrick DELAUNAY
• [PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200616   Tom Rini
• [PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200619   Patrick DELAUNAY
• [PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200619   Tom Rini
• [PULL] u-boot-atmel-fixes-2020.07-a   Eugen.Hristev at microchip.com
• [PULL] u-boot-atmel-fixes-2020.07-a   Tom Rini
• [PULL] u-boot-atmel-fixes-2020.07-a   Eugen.Hristev at microchip.com
• [PULL] u-boot-atmel-fixes-2020.07-a   Tom Rini
• [PULL] u-boot-mips   Daniel Schwierzeck
• [PULL] u-boot-mips   Tom Rini
• [PULL] u-boot-mips   Tom Rini
• [PULL] u-boot-mips   Daniel Schwierzeck
• [PULL] u-boot-mips   Tom Rini
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-sh/net   Marek Vasut
• [PULL] u-boot-sh/net   Tom Rini
• [PULL] u-boot-socfpga/master   Marek Vasut
• [PULL] u-boot-socfpga/master   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-usb/master   Tom Rini
• [Pull u-boot-mmc] Please pull mmc-2020-6-15   Peng Fan
• [Pull u-boot-mmc] Please pull mmc-2020-6-15   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20200618   Neil Armstrong
• [PULL u-boot] Please pull u-boot-amlogic-20200618   Tom Rini
• [RESEND PATCH 0/3] env: mmc: allow support of mmc_get_env_dev with OF_CONTROL   Patrick Delaunay
• [RESEND PATCH 1/3] env: mmc: allow support of mmc_get_env_dev with OF_CONTROL   Patrick Delaunay
• [RESEND PATCH 2/3] env: mmc: correct the offset returned by mmc_offset_try_partition   Patrick Delaunay
• [RESEND PATCH 3/3] env: mmc: add redundancy support in mmc_offset_try_partition   Patrick Delaunay
• [RESEND PATCH] env: add prototypes for weak function   Patrick Delaunay
• [RESEND PATCH] usb: max3420: add the gadget driver   jassisinghbrar at gmail.com
• [RESEND PATCH] usb: max3420: add the gadget driver   Jassi Brar
• [RESEND PATCH] usb: max3420: add the gadget driver   Marek Vasut
• [RESEND PATCH] usb: max3420: add the gadget driver   Lukasz Majewski
• [RESEND PATCH] usb: max3420: add the gadget driver   Jassi Brar
• [RESEND PATCH] usb: max3420: add the gadget driver   Jassi Brar
• [RESEND PATCH] usb: max3420: add the gadget driver   Marek Vasut
• [RESEND PATCH] usb: max3420: add the gadget driver   Jassi Brar
• [RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   Tom Rini
• [RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps,reset-gpio" phy-rst gpio for stm32   David Wu
• [RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   David Wu
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Patrick DELAUNAY
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Marek Vasut
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Patrick DELAUNAY
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Marek Vasut
• [Resend PATCHv3 02/15] net: fsl_mdio: Correct the MII management register block address   Zhiqiang Hou
• [RESEND PATCH v5 0/4] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [RESEND PATCH v5 1/4] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [RESEND PATCH v5 1/4] cmd: env: add option for quiet output on env info   Tom Rini
• [RESEND PATCH v5 2/4] cmd: env: check real location for env info command   Patrick Delaunay
• [RESEND PATCH v5 2/4] cmd: env: check real location for env info command   Tom Rini
• [RESEND PATCH v5 3/4] configs: sandbox: Enable sub command 'env info'   Patrick Delaunay
• [RESEND PATCH v5 4/4] test: env: add test for env info sub-command   Patrick Delaunay
• [RESEND PATCH v5 4/4] test: env: add test for env info sub-command   Stephen Warren
• [RESEND PATCH v5 4/4] test: env: add test for env info sub-command   Patrick DELAUNAY
• [RESEND PATCH v5 4/4] test: env: add test for env info sub-command   Stephen Warren
• [RESEND PATCH v5 4/4] test: env: add test for env info sub-command   Patrick DELAUNAY
• [RESEND v2 1/1] log: don't show function by default   Heinrich Schuchardt
• [RESEND v2 1/1] log: don't show function by default   Heinrich Schuchardt
• [RESEND v2 1/1] log: don't show function by default   Simon Glass
• [RFC 0/4] drivers: footprint reduction proposal   Walter Lozano
• [RFC 0/4] drivers: footprint reduction proposal   Tom Rini
• [RFC 0/4] drivers: footprint reduction proposal   Walter Lozano
• [RFC 0/4] drivers: footprint reduction proposal   Tom Rini
• [RFC 0/4] drivers: footprint reduction proposal   Walter Lozano
• [RFC 0/4] drivers: footprint reduction proposal   Walter Lozano
• [RFC 1/4] dtoc: add POC for dtb shrink   Walter Lozano
• [RFC 2/4] dtoc: add initial support for deleting DTB nodes   Walter Lozano
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Walter Lozano
• [RFC 4/4] mmc: fsl_esdhc_imx: make use of dtoc to generate struct udevice_id   Walter Lozano
• [RFC PATCH 0/3] Improve USB Keyboard support for rpi3/rpi4   Jason Wessel
• [RFC PATCH 0/4] CONFIG_IS_ENABLED magic   Rasmus Villemoes
• [RFC PATCH 0/4] CONFIG_IS_ENABLED magic   Tom Rini
• [RFC PATCH 1/1] gpio: Handle NULL pointers gracefully   Simon Glass
• [RFC PATCH 1/1] gpio: Handle NULL pointers gracefully   Pratyush Yadav
• [RFC PATCH 1/1] gpio: Handle NULL pointers gracefully   Simon Glass
• [RFC PATCH 1/3] xhci: Add polling support for USB keyboards   Jason Wessel
• [RFC PATCH 1/3] xhci: Add polling support for USB keyboards   Matthias Brugger
• [RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC   Rasmus Villemoes
• [RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC   Simon Glass
• [RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC   Rasmus Villemoes
• [RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC   Tom Rini
• [RFC PATCH 2/3] usb_kbd: Do not fail the keyboard if it does not have an interrupt pending   Jason Wessel
• [RFC PATCH 2/4] linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }*   Rasmus Villemoes
• [RFC PATCH 2/4] linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }*   Simon Glass
• [RFC PATCH 3/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Jason Wessel
• [RFC PATCH 3/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Matthias Brugger
• [RFC PATCH 3/4] linux/kconfig.h: remove unused helper macros   Rasmus Villemoes
• [RFC PATCH 3/4] linux/kconfig.h: remove unused helper macros   Simon Glass
• [RFC PATCH 4/4] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED   Rasmus Villemoes
• [RFC PATCH 4/4] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED   Simon Glass
• [RFC PATCH] allow choosing -Os/-O2 separately for SPL and TPL   Rasmus Villemoes
• [RFC PATCH] allow choosing -Os/-O2 separately for SPL and TPL   Simon Glass
• [RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40   Icenowy Zheng
• [RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40   André Przywara
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Rasmus Villemoes
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Stefan Roese
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Rasmus Villemoes
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Stefan Roese
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Stefan Roese
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Rasmus Villemoes
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Stefan Roese
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Tom Rini
• [RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer()   Rasmus Villemoes
• [RFC PATCH v2 0/5] Improve USB Keyboard support for rpi3/rpi4   Jason Wessel
• [RFC PATCH v2 1/5] xhci: Add polling support for USB keyboards   Jason Wessel
• [RFC PATCH v2 2/5] usb_kbd: Do not fail the keyboard if it does not have an interrupt pending   Jason Wessel
• [RFC PATCH v2 3/5] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Jason Wessel
• [RFC PATCH v2 4/5] xhci-ring.c: Add the poll_pend state to properly abort transactions   Jason Wessel
• [RFC PATCH v2 5/5] xhci-ring: Fix crash when issuing "usb reset"   Jason Wessel
• [tools] FIT tools rework   Alexandre BESNARD
• [tools] FIT tools rework   Tom Rini
• [U-boot,1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver   Mark-MC.Lee
• [U-boot,V2,0/2] Enable mt7531 switch support for MT7629   MarkLee
• [U-boot, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver   MarkLee
• [U-boot, V2, 2/2] arm: dts: mediatek: enable sgmii mode and mt7531 switch for mt7629   MarkLee
• [U-Boot] [PATCH v1 01/10] mmc: add missing space before comment delimiter   Tom Rini
• [U-Boot] [PATCH v1 03/10] serial: pxa: clean-up platform data include file   Tom Rini
• [U-Boot] [PATCH v1 04/10] Makefile: allow dm_mmc without of_control   Tom Rini
• [U-Boot] [PATCH v1 05/10] dm: core: gracefully handle alias seq without of   Tom Rini
• [U-Boot] [PATCH v1 06/10] kconfig: mmc: move pxa_mmc_generic to kconfig   Tom Rini
• [U-Boot] [PATCH v1 07/10] arm: pxa: mmc: add driver model support   Tom Rini
• [U-Boot] [PATCH v1 08/10] colibri_pxa270_defconfig: enable cmd_dm   Tom Rini
• [U-Boot] [PATCH v1 09/10] colibri_pxa270: add mmc platform data   Tom Rini
• [U-Boot] [PATCH v1 10/10] colibri_pxa270_defconfig: enable dm_mmc   Tom Rini
• [U-Boot] [PATCH v2 04/16] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC   Heinrich Schuchardt
• [U-Boot] [PATCH v2 04/16] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC   Tan, Ley Foon
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
• [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master   Rick Chen
• [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master   Rick Chen
• [U-Boot] Pull request: u-boot-riscv/master   Rick Chen
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
• [U-Boot] Pull request: u-boot-riscv/master   Bin Meng
• [U-Boot] Pull request: u-boot-riscv/master   Rick Chen
• [U-Boot] Pull request: u-boot-riscv/master   Sean Anderson
• [u-boot PATCH] phy: omap-usb2-phy: disable phy charger detect   Roger Quadros
• [u-boot PATCH] phy: omap-usb2-phy: disable phy charger detect   Lokesh Vutla
• [Uboot-stm32] [PATCH 2/2] dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSI   Patrice CHOTARD
• [v2 1/3] Watchdog: introduce ARM SBSA watchdog driver   Biwen Li
• [v2 1/3] Watchdog: introduce ARM SBSA watchdog driver   Stefan Roese
• [v2 1/3] Watchdog: introduce ARM SBSA watchdog driver   Biwen Li (OSS)
• [v2 2/3] arm64: lx2160a: dts: Add watchdog node   Biwen Li
• [v2 3/3] configs: lx2160a: Enable Watchdog support   Biwen Li
• [v2] Azure: Add 'tools-only' build for macOS X hosts   Tom Rini
• [v2] I2C: ls1043a, ls1046a: enable SYS_I2C_MXC   Biwen Li
• [v3 1/3] Watchdog: introduce ARM SBSA watchdog driver   Biwen Li
• [v3 2/3] arm64: lx2160a: dts: Add watchdog node   Biwen Li
• [v3 3/3] configs: lx2160a: Enable Watchdog support   Biwen Li
• [v4 1/3] Watchdog: introduce ARM SBSA watchdog driver   Biwen Li
• [v4 2/3] arm64: lx2160a: dts: Add watchdog node   Biwen Li
• [v4 3/3] configs: lx2160a: Enable Watchdog support   Biwen Li
• Antwort: [PATCH v2 20/35] acpi: Support writing a GPIO   Wolfgang Wallner
• Antwort: [PATCH v2 23/35] acpi: Add support for writing a Power Resource   Wolfgang Wallner
• Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900)   Pali Rohár
• Can't access mmc #0 on mt7623 when booted from external SD   David Woodhouse
• Can't access mmc #0 on mt7623 when booted from external SD   Michael Nazzareno Trimarchi
• Can't access mmc #0 on mt7623 when booted from external SD   David Woodhouse
• Can't access mmc #0 on mt7623 when booted from external SD   Michael Nazzareno Trimarchi
• Can't access mmc #0 on mt7623 when booted from external SD   David Woodhouse
• Can't access mmc #0 on mt7623 when booted from external SD   Michael Nazzareno Trimarchi
• Can't access mmc #0 on mt7623 when booted from external SD   David Woodhouse
• Can't access mmc #0 on mt7623 when booted from external SD   David Woodhouse
• Can't access mmc #0 on mt7623 when booted from external SD   David Woodhouse
• Can't access mmc #0 on mt7623 when booted from external SD   Michael Nazzareno Trimarchi
• Can't access mmc #0 on mt7623 when booted from external SD   David Woodhouse
• Can't access mmc #0 on mt7623 when booted from external SD   Sean Wang
• Current Azure CI failures   Tom Rini
• Current Azure CI failures   Bin Meng
• Current Azure CI failures   Tom Rini
• ddr: Rework errata A008109, A008378, 009942 workaround   Priyanka Jain
• Fwd: [PATCH 1/1] riscv: use log functions in fdt_fixup   Heinrich Schuchardt
• Fwd: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Brandon Maier
• Fwd: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c   Brandon Maier
• Gitlab failure   Simon Glass
• Gitlab failure   Tom Rini
• Gitlab failure   Simon Glass
• Gitlab failure   Tom Rini
• Gitlab failure   Simon Glass
• GPIO request failures for Renesas rcar-gen3   Adam Ford
• GPIO request failures for Renesas rcar-gen3   Marek Vasut
• GPIO request failures for Renesas rcar-gen3   Adam Ford
• GPIO request failures for Renesas rcar-gen3   Adam Ford
• GPIO request failures for Renesas rcar-gen3   Marek Vasut
• GPIO request failures for Renesas rcar-gen3   Adam Ford
• GPIO request failures for Renesas rcar-gen3   Marek Vasut
• GRUB Multiboot specification equivalent implementation from U-Boot - reserved memory regions   Johannes Krottmayer
• How to fix: partition (SPL) size alignment incorrect   Adam Ford
• How to fix: partition (SPL) size alignment incorrect   Miquel Raynal
• imx: move ATF to the back of the FIT to fix loading over yModem   sbabic at denx.de
• Lost patch   Simon Glass
• Mainlining advice for new (MStar/SigmaStar) ARMv7 SoC family   Daniel Palmer
• Mainlining advice for new (MStar/SigmaStar) ARMv7 SoC family   Tom Rini
• Mainlining advice for new (MStar/SigmaStar) ARMv7 SoC family   Daniel Palmer
• microSD Breakout Port   Faruk Kılavuz
• microSD Breakout Port   Tom Rini
• Multi DTB selection in SPL FIT image   Vanessa Ayumi Maegima
• mx6sabresd: Trying to use qca,clk-out-frequency   Fabio Estevam
• mx6sabresd: Trying to use qca,clk-out-frequency   Vladimir Oltean
• mx6sabresd: Trying to use qca,clk-out-frequency   Vladimir Oltean
• mx6sabresd: Trying to use qca,clk-out-frequency   Tom Rini
• mx6sabresd: Trying to use qca,clk-out-frequency   Vladimir Oltean
• mx6sabresd: Trying to use qca,clk-out-frequency   Fabio Estevam
• mx6sabresd: Trying to use qca,clk-out-frequency   Michael Walle
• mx6sabresd: Trying to use qca,clk-out-frequency   Fabio Estevam
• mx6sabresd: Trying to use qca,clk-out-frequency   Michael Walle
• Out of bounds access in arch/arm/cpu/armv7/iproc-common/armpll.c   Heinrich Schuchardt
• Out of bounds access in arch/arm/cpu/armv7/iproc-common/armpll.c   Scott Branden
• Pass disk context to GRUB   Garrett Brown
• PINE64 Rock64 - How to get SPI driver working   Johannes Krottmayer
• Please pull u-boot-dm/next   Simon Glass
• Please pull u-boot-dm/next   Tom Rini
• Please pull u-boot-dm/next   Bin Meng
• Please pull u-boot-dm/next   Tom Rini
• Please pull u-boot-dm/next   Bin Meng
• Please pull u-boot-dm/next   Tom Rini
• Please pull u-boot-dm/next   Bin Meng
• Please pull u-boot-video   Anatolij Gustschin
• Please pull u-boot-video   Tom Rini
• Please pull u-boot-video   Anatolij Gustschin
• Please pull u-boot-video   Tom Rini
• Please pull u-boot-video   Anatolij Gustschin
• Please pull u-boot-video   Tom Rini
• Please pull u-boot-video/next   Anatolij Gustschin
• Please pull u-boot-video/next   Tom Rini
• Please pull u-boot-x86   Bin Meng
• Please pull u-boot-x86   Tom Rini
• Pull request (-next): u-boot-spi/master   Jagan Teki
• Pull request (-next): u-boot-spi/master   Tom Rini
• Pull request, u-boot-tegra/master   Tom Warren
• Pull request, u-boot-tegra/master   Tom Rini
• Pull request: u-boot-rockchip-20200531   Kever Yang
• Pull request: u-boot-rockchip-20200531   Tom Rini
• Pull request: u-boot-rockchip-20200607   Kever Yang
• Pull request: u-boot-rockchip-20200607   Tom Rini
• Pull request: u-boot-rockchip-20200628   Kever Yang
• Pull request: u-boot-rockchip-20200628   Tom Rini
• Pull request: u-boot-spi/master   Jagan Teki
• Pull request: u-boot-spi/master   Tom Rini
• Pull request: u-boot-spi/master   Jagan Teki
• Pull request: u-boot-spi/master   Tom Rini
• Pull request: u-boot-sunxi/master   Jagan Teki
• Pull request: u-boot-sunxi/master   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc4   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-07-rc4   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc4 (2)   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-07-rc4 (2)   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc5   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-07-rc5   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc5 (2)   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-07-rc5 (2)   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc6   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-07-rc6   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc6 (2)   Heinrich Schuchardt
• pull request of u-boot-mpc85xx for v2020.07   Priyanka Jain
• pull request of u-boot-mpc85xx for v2020.07   Tom Rini
• qemu-system-riscv32: warning: No -bios option specified   Heinrich Schuchardt
• qemu-system-riscv32: warning: No -bios option specified   Bin Meng
• Raspberry PI 4 and U-boot   Duncan Hare
• Raspberry PI 4 and U-boot   Simon Glass
• repurposing dhcp command   Ramon Fried
• repurposing dhcp command   Tom Rini
• rk3399: boot from compressed Image   Tian Yuanhao
• rockchip: correctly set vop0 or vop1   Patrick Wildt
• rockchip: correctly set vop0 or vop1   Arnaud Patard (Rtp)
• rockchip: correctly set vop0 or vop1   Patrick Wildt
• rockchip: correctly set vop0 or vop1   Arnaud Patard (Rtp)
• rockchip: correctly set vop0 or vop1   Patrick Wildt
• rockchip: correctly set vop0 or vop1   Kever Yang
• rockchip: correctly set vop0 or vop1   Kever Yang
• rockchip: correctly set vop0 or vop1   Andy Yan
• rockchip: enable PCIe and NVMe on Pinebook Pro   Patrick Wildt
• rockchip: enable PCIe and NVMe on Pinebook Pro   Kever Yang
• rockchip: enable PCIe and NVMe on Pinebook Pro   Peter Robinson
• Setting DEVICE_TREE for xilinx_zynq_virt_defconfig?   Florian Klink
• Setting DEVICE_TREE for xilinx_zynq_virt_defconfig?   Michal Simek
• Thoughts on code line length   Tom Rini
• Thoughts on code line length   Kever Yang
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Michael Walle
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Vladimir Oltean
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Michael Walle
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Tom Rini
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Soeren Moch
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Soeren Moch
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Sören Moch
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Soeren Moch
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-Boot atheros PHY support and cubox ethernet   Soeren Moch
• U-Boot atheros PHY support and cubox ethernet   Fabio Estevam
• U-BOOT build for t1024rdb   Uğur Şen
• U-Boot call on Monday?   Simon Glass
• U-Boot call on Monday?   Tom Rini
• U-boot Designware SPI driver issue   Yakov Shmulevich
• U-Boot Logo showing incorrect colors with eLCDIF   Anatolij Gustschin
• U-Boot Logo showing incorrect colors with eLCDIF   Fabio Estevam
• U-Boot mainline: Digilent Zybo-Z7 support   Johannes Krottmayer
• U-Boot mainline: Digilent Zybo-Z7 support   Milan Obuch
• U-Boot mainline: Digilent Zybo-Z7 support   Michal Simek
• U-Boot mainline: Digilent Zybo-Z7 support   Johannes Krottmayer
• U-Boot mainline: Digilent Zybo-Z7 support   Michal Simek
• U-Boot mainline: Digilent Zybo-Z7 support   Johannes Krottmayer
• U-Boot mainline: Digilent Zybo-Z7 support   Michal Simek
• UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE   Anastasiia Lukianenko
• UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE   Anastasiia Lukianenko
• UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE   Simon Glass
• UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE   Anastasiia Lukianenko
• UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE   Simon Glass
• Update of dts files for U-Boot for i.MX   Tom Rini
• Update of dts files for U-Boot for i.MX   Peng Fan
• Update of dts files for U-Boot for i.MX   Tom Rini
• Usb on imx8mm   Joris OFFOUGA
• Usb on imx8mm   Peng Fan
• Usb on imx8mm   Joris Offouga
• USB patch for rpi4   Stuart Yoder
• USB patch for rpi4   Stuart Yoder
• USB patch for rpi4   Peter Robinson
• USB patch for rpi4   Stuart Yoder
• USB patch for rpi4   Peter Robinson
• USB patch for rpi4   Sylwester Nawrocki
• USB patch for rpi4   Nicolas Saenz Julienne
• USB patch for rpi4   Stuart Yoder
• Video support question   Yusuf Altıparmak