[PATCH 1/5] imx8mm_evk: Select the watchdog driver

sbabic at denx.de sbabic at denx.de
Mon Jun 8 19:23:33 CEST 2020


> Currently the watchdog driver is not selected, which causes the following
> warnings in both SPL and U-Boot proper:
> U-Boot SPL 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300)
> Normal Boot
> WDT:   Started without servicing (60s timeout)
> Trying to boot from MMC1
> U-Boot 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300)
> CPU:   Freescale i.MX8MMQ rev1.0 at 1200 MHz
> Reset cause: POR
> Model: FSL i.MX8MM EVK board
> DRAM:  2 GiB
> WDT:   Started without servicing (60s timeout)
> ....
> System reboots after staying 60s in the U-Boot prompt.
> Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be 
> properly serviced.
> Suggested-by: Marek Vasut <marex at denx.de>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list