June 2020 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Mon Jun 1 00:26:32 CEST 2020
Ending: Tue Jun 30 23:35:07 CEST 2020
Messages: 3841

[v2 1/3] Watchdog: introduce ARM SBSA watchdog driver Biwen Li (OSS)
[PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board Priyanka Jain (OSS)
[PATCH 01/13] net: fsl_pq_mdio: Add the compatible "fsl, gianfar-mdio" support Priyanka Jain (OSS)
[PATCHv4 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a) Priyanka Jain (OSS)
[PATCHv2 3/3] net: tsec: Access TBI PHY through the corresponding MII Priyanka Jain (OSS)
[PATCH] drivers: net: e1000: with DM_ETH needs DM_PCI too Priyanka Jain (OSS)
[PATCH] powerpc/mpc85xx: Fix compiling error with DM_GPIO Priyanka Jain (OSS)
[PATCH] powerpc: mpc85xx: fix unused variable warning Priyanka Jain (OSS)
[PATCH] drivers: net: qe: deselect QE when DM_ETH is enabled Priyanka Jain (OSS)
[PATCHv2 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH Priyanka Jain (OSS)
rockchip: correctly set vop0 or vop1 Arnaud Patard (Rtp)
rockchip: correctly set vop0 or vop1 Arnaud Patard (Rtp)
[PATCH] sunxi: Add support for using UART4 as console on A64 Nazım Gediz AYDINDOĞMUŞ
[PATCH 2/7] mmc: zynq_sdhci: Define timing macro's Faiz Abbas
Video support question Yusuf Altıparmak
[PATCH] riscv: sbi: Add newline to error message Sean Anderson
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Sean Anderson
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Sean Anderson
[PATCH v2 00/10] riscv: Add FPIOA and GPIO support for Kendryte K210 Sean Anderson
[PATCH v2 01/10] pinctrl: Add pinmux property support to pinctrl-generic Sean Anderson
[PATCH v2 02/10] test: pinmux: Add test for pin muxing Sean Anderson
[PATCH v2 03/10] pinctrl: Add support for Kendryte K210 FPIOA Sean Anderson
[PATCH v2 04/10] gpio: sifive: Use generic reg read function Sean Anderson
[PATCH v2 05/10] gpio: dw: Fix warnings about casting int to pointer Sean Anderson
[PATCH v2 06/10] gpio: dw: Add a trailing underscore to generated name Sean Anderson
[PATCH v2 07/10] gpio: dw: Return output value when direction is out Sean Anderson
[PATCH v2 08/10] led: gpio: Default to using node name if label is absent Sean Anderson
[PATCH v2 09/10] riscv: Add pinmux and gpio bindings for Kendryte K210 Sean Anderson
[PATCH v2 10/10] riscv: Add FPIOA and GPIO support for Kendryte K210 Sean Anderson
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Sean Anderson
[PATCH v2 07/10] gpio: dw: Return output value when direction is out Sean Anderson
[PATCH v3 00/10] riscv: Add FPIOA and GPIO support for Kendryte K210 Sean Anderson
[PATCH v3 01/10] pinctrl: Add pinmux property support to pinctrl-generic Sean Anderson
[PATCH v3 02/10] test: pinmux: Add test for pin muxing Sean Anderson
[PATCH v3 03/10] pinctrl: Add support for Kendryte K210 FPIOA Sean Anderson
[PATCH v3 04/10] gpio: sifive: Use generic reg read function Sean Anderson
[PATCH v3 05/10] gpio: dw: Fix warnings about casting int to pointer Sean Anderson
[PATCH v3 06/10] gpio: dw: Add a trailing underscore to generated name Sean Anderson
[PATCH v3 07/10] gpio: dw: Return output value when direction is out Sean Anderson
[PATCH v3 08/10] led: gpio: Default to using node name if label is absent Sean Anderson
[PATCH v3 09/10] riscv: Add pinmux and gpio bindings for Kendryte K210 Sean Anderson
[PATCH v3 10/10] riscv: Add FPIOA and GPIO support for Kendryte K210 Sean Anderson
[PATCH v2 02/10] test: pinmux: Add test for pin muxing Sean Anderson
[PATCH v2 08/10] led: gpio: Default to using node name if label is absent Sean Anderson
[PATCH v2 01/10] pinctrl: Add pinmux property support to pinctrl-generic Sean Anderson
[U-Boot] Pull request: u-boot-riscv/master Sean Anderson
[PATCH 3/5] fu540: dtsi: add reset producer and consumer entries Sean Anderson
[PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's Sean Anderson
[PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's Sean Anderson
[PATCH v2 02/10] test: pinmux: Add test for pin muxing Sean Anderson
[PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210 Sean Anderson
[PATCH v4 01/12] pinctrl: Add pinmux property support to pinctrl-generic Sean Anderson
[PATCH v4 02/12] pinctrl: Reformat documentation in dm/pinctrl.h Sean Anderson
[PATCH v4 03/12] test: pinmux: Add test for pin muxing Sean Anderson
[PATCH v4 04/12] pinctrl: Add support for Kendryte K210 FPIOA Sean Anderson
[PATCH v4 05/12] gpio: sifive: Use generic reg read function Sean Anderson
[PATCH v4 06/12] gpio: dw: Fix warnings about casting int to pointer Sean Anderson
[PATCH v4 07/12] gpio: dw: Add a trailing underscore to generated name Sean Anderson
[PATCH v4 08/12] gpio: dw: Return output value when direction is out Sean Anderson
[PATCH v4 09/12] led: gpio: Default to using node name if label is absent Sean Anderson
[PATCH v4 10/12] test: dm: Test for default led naming Sean Anderson
[PATCH v4 11/12] riscv: Add pinmux and gpio bindings for Kendryte K210 Sean Anderson
[PATCH v4 12/12] riscv: Add FPIOA and GPIO support for Kendryte K210 Sean Anderson
[PATCH v14 00/20] riscv: Add Sipeed Maix support Sean Anderson
[PATCH v14 01/20] clk: Always use the supplied struct clk Sean Anderson
[PATCH v14 02/20] clk: Check that ops of composite clock components exist before calling Sean Anderson
[PATCH v14 03/20] clk: Fix clk_get_by_* handling of index Sean Anderson
[PATCH v14 04/20] clk: Add K210 pll support Sean Anderson
[PATCH v14 05/20] clk: Add a bypass clock for K210 Sean Anderson
[PATCH v14 06/20] clk: Add K210 clock support Sean Anderson
[PATCH v14 07/20] dm: Add support for simple-pm-bus Sean Anderson
[PATCH v14 08/20] dm: Fix error handling for dev_read_addr_ptr Sean Anderson
[PATCH v14 09/20] reset: Add generic reset driver Sean Anderson
[PATCH v14 10/20] lib: Always set errno in hcreate_r Sean Anderson
[PATCH v14 11/20] riscv: Add headers for asm/global_data.h Sean Anderson
[PATCH v14 12/20] riscv: Clear pending interrupts before enabling IPIs Sean Anderson
[PATCH v14 13/20] riscv: Clean up IPI initialization code Sean Anderson
[PATCH v14 14/20] riscv: Add option to support RISC-V privileged spec 1.9 Sean Anderson
[PATCH v14 15/20] riscv: Allow use of reset drivers Sean Anderson
[PATCH v14 16/20] riscv: Try to get cpu frequency from a "clocks" node if it exists Sean Anderson
[PATCH v14 17/20] riscv: Enable cpu clock if it is present Sean Anderson
[PATCH v14 18/20] riscv: Add device tree for K210 and Sipeed Maix BitM Sean Anderson
[PATCH v14 19/20] doc: riscv: Add documentation for Sipeed Maix Bit Sean Anderson
[PATCH v14 20/20] riscv: Add Sipeed Maix support Sean Anderson
[PATCH] clk: Unconditionally recursively en-/dis-able clocks Sean Anderson
[PATCH v2 02/10] test: pinmux: Add test for pin muxing Sean Anderson
[PATCH] clk: Add more information to debug messages Sean Anderson
[PATCH] common/board_f: Respect original FDT size while relocating Oleksandr Andrushchenko
[PATCH] common/board_f: Respect original FDT size while relocating Oleksandr Andrushchenko
[PATCH] common/board_f: Respect original FDT size while relocating Oleksandr Andrushchenko
[PATCH 0/2] Add support for multiple required keys Thirupathaiah Annapureddy
[PATCH 1/2] vboot: add support for multiple required keys Thirupathaiah Annapureddy
[PATCH 2/2] test: vboot: add a test for multiple required keys Thirupathaiah Annapureddy
[PATCH 1/1] efi_loader: prepare for read only OP-TEE variables Ilias Apalodimas
[PATCH 0/2] board: amlogic: move boards doc into doc/board/amlogic Neil Armstrong
[PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic Neil Armstrong
[PATCH 2/2] board: amlogic: add board doc files to MAINTAINERS Neil Armstrong
[PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic Neil Armstrong
[PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic Neil Armstrong
[PULL u-boot] Please pull u-boot-amlogic-20200618 Neil Armstrong
[PATCH] board: amlogic: Add Odroid-N2 board support Neil Armstrong
[PATCH] board: amlogic: Add Odroid-N2 board support Neil Armstrong
[PATCH 0/2] u-boot support for ODROID-C4 Neil Armstrong
[PATCH] board: amlogic: Add Odroid-N2 board support Neil Armstrong
[PATCH] sunxi: Add support for using UART4 as console on A64 Nazım Gediz Aydındoğmuş
[tools] FIT tools rework Alexandre BESNARD
[PATCH] arm64: issue ISB after updating system registers Volodymyr Babchuk
[PATCH v2] arm64: issue ISB after updating system registers Volodymyr Babchuk
[PATCH v3 1/5] imx8mp_evk: spl: drop useless code Stefano Babic
[EXT] [PATCH v2 1/1] imx: rom api: fix image offset computation Stefano Babic
[GIT PULL] Pull request: u-boot-imx u-boot-imx-20200609 Stefano Babic
[PATCHv2 24/31] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Stefano Babic
[PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Stefano Babic
[PATCH v2 4/4] mx6cuboxi: Convert to DM_ETH Stefano Babic
[GIT PULL] Pull request: u-boot-imx u-boot-imx-20200623 Stefano Babic
[PATCH] ARM: imx: soc: Add reset for non-DM case Stefano Babic
[PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression Stefano Babic
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Nico Becker
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Nico Becker
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Nico Becker
[PATCH] arm: socfpga: add board support for ic-automation moritz III Nico Becker
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Nico Becker
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Nico Becker
[PATCH v2] arm: socfpga: add board support for ic-automation moritz III Nico Becker
[PATCH v3] arm: socfpga: add board support for ic-automation moritz III Nico Becker
[PATCH U-BOOT v2 00/30] fs: btrfs: Re-implement btrfs support using the more widely used extent buffer base code Marek Behún
[PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs Marek Behún
[PATCH U-BOOT v3 01/30] fs: btrfs: Sync btrfs_btree.h from kernel Marek Behún
[PATCH U-BOOT v3 02/30] fs: btrfs: Add more checksum algorithms Marek Behún
[PATCH U-BOOT v3 03/30] fs: btrfs: Crossport btrfs_read_dev_super() from btrfs-progs Marek Behún
[PATCH U-BOOT v3 04/30] fs: btrfs: Crossport rbtree-utils from btrfs-progs Marek Behún
[PATCH U-BOOT v3 05/30] fs: btrfs: Crossport extent-cache.[ch] from btrfs-progs Marek Behún
[PATCH U-BOOT v3 06/30] fs: btrfs: Crossport extent-io.[ch] from btrfs-progs Marek Behún
[PATCH U-BOOT v3 07/30] fs: btrfs: Crossport structure accessor into ctree.h Marek Behún
[PATCH U-BOOT v3 08/30] fs: btrfs: Crossport volumes.[ch] from btrfs-progs Marek Behún
[PATCH U-BOOT v3 09/30] fs: btrfs: Crossport read_tree_block() from btrfs-progs Marek Behún
[PATCH U-BOOT v3 10/30] fs: btrfs: Rename struct btrfs_path to struct __btrfs_path Marek Behún
[PATCH U-BOOT v3 11/30] fs: btrfs: Rename btrfs_root to __btrfs_root Marek Behún
[PATCH U-BOOT v3 12/30] fs: btrfs: Crossport struct btrfs_root to ctree.h Marek Behún
[PATCH U-BOOT v3 13/30] fs: btrfs: Crossport btrfs_search_slot() from btrfs-progs Marek Behún
[PATCH U-BOOT v3 14/30] fs: btrfs: Crossport btrfs_read_sys_array() and btrfs_read_chunk_tree() Marek Behún
[PATCH U-BOOT v3 15/30] fs: btrfs: Crossport open_ctree_fs_info() from btrfs-progs Marek Behún
[PATCH U-BOOT v3 16/30] fs: btrfs: Rename path resolve related functions to avoid name conflicts Marek Behún
[PATCH U-BOOT v3 17/30] fs: btrfs: Use btrfs_readlink() to implement __btrfs_readlink() Marek Behún
[PATCH U-BOOT v3 18/30] fs: btrfs: inode: Allow next_length() to return value > BTRFS_NAME_LEN Marek Behún
[PATCH U-BOOT v3 19/30] fs: btrfs: Implement btrfs_lookup_path() Marek Behún
[PATCH U-BOOT v3 20/30] fs: btrfs: Use btrfs_iter_dir() to replace btrfs_readdir() Marek Behún
[PATCH U-BOOT v3 21/30] fs: btrfs: Use btrfs_lookup_path() to implement btrfs_exists() and btrfs_size() Marek Behún
[PATCH U-BOOT v3 22/30] fs: btrfs: Rename btrfs_file_read() and its callees to avoid name conflicts Marek Behún
[PATCH U-BOOT v3 23/30] fs: btrfs: Introduce btrfs_read_extent_inline() and btrfs_read_extent_reg() Marek Behún
[PATCH U-BOOT v3 24/30] fs: btrfs: Introduce lookup_data_extent() for later use Marek Behún
[PATCH U-BOOT v3 25/30] fs: btrfs: Implement btrfs_file_read() Marek Behún
[PATCH U-BOOT v3 26/30] fs: btrfs: Introduce function to resolve path in one subvolume Marek Behún
[PATCH U-BOOT v3 27/30] fs: btrfs: Introduce function to resolve the path of one subvolume Marek Behún
[PATCH U-BOOT v3 28/30] fs: btrfs: Imeplement btrfs_list_subvols() using new infrastructure Marek Behún
[PATCH U-BOOT v3 29/30] fs: btrfs: Cleanup the old implementation Marek Behún
[PATCH U-BOOT v3 30/30] MAINTAINERS: Add btrfs mailing list and myself as reviewer Marek Behún
[PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs Marek Behún
[PATCH 0/5] Fixes for running U-boot under QEMU/KVM Ard Biesheuvel
[PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK Ard Biesheuvel
[PATCH 2/5] arm: qemu: enable LPAE on 32-bit Ard Biesheuvel
[PATCH 3/5] arm: qemu: implement enable_caches() Ard Biesheuvel
[PATCH 4/5] arm: qemu: disable the EFI workaround for older GRUB Ard Biesheuvel
[PATCH 5/5] arm: qemu: override flash accessors to use virtualizable instructions Ard Biesheuvel
[PATCH 5/5] arm: qemu: override flash accessors to use virtualizable instructions Ard Biesheuvel
[PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK Ard Biesheuvel
[PATCH 2/5] arm: qemu: enable LPAE on 32-bit Ard Biesheuvel
[PATCH 2/5] arm: qemu: enable LPAE on 32-bit Ard Biesheuvel
[PATCH v2 0/5] Fixes for running U-boot under QEMU/KVM Ard Biesheuvel
[PATCH v2 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK/_WRITETHROUGH Ard Biesheuvel
[PATCH v2 2/5] arm: qemu: enable LPAE on 32-bit Ard Biesheuvel
[PATCH v2 3/5] arm: qemu: implement enable_caches() Ard Biesheuvel
[PATCH v2 4/5] arm: qemu: disable the EFI workaround for older GRUB Ard Biesheuvel
[PATCH v2 5/5] arm: qemu: override flash accessors to use virtualizable instructions Ard Biesheuvel
[PATCH v2 5/5] arm: qemu: override flash accessors to use virtualizable instructions Ard Biesheuvel
[PATCH] doc: driver-model: fix typo in design.rst Dario Binacchi
[PATCH 1/1] clk: ccf: mux: change the get_rate helper Dario Binacchi
[PATCH v2] doc: driver-model: fix typo in design.rst Dario Binacchi
[PATCH] fastboot: getvar: fix partition-size return value Gary Bisson
[PATCH v3 00/14] arm: add support for SoC S5P4418 Stefan Bosch
[PATCH v3 01/14] arm: add mach-nexell (header files) Stefan Bosch
[PATCH v3 02/14] arm: add mach-nexell (all files except header files) Stefan Bosch
[PATCH v3 03/14] gpio: add nexell driver Stefan Bosch
[PATCH v3 04/14] i2c: add nexell driver Stefan Bosch
[PATCH v3 05/14] mmc: add nexell driver Stefan Bosch
[PATCH v3 06/14] pinctrl: add nexell driver Stefan Bosch
[PATCH v3 07/14] pwm: add driver for nexell Stefan Bosch
[PATCH v3 08/14] video: add nexell video driver (soc: displaytop) Stefan Bosch
[PATCH v3 09/14] video: add nexell video driver (soc: mlc, mipi) Stefan Bosch
[PATCH v3 10/14] video: add nexell video driver (soc: lvds, hdmi) Stefan Bosch
[PATCH v3 11/14] video: add nexell video driver (soc: dpc, makefile) Stefan Bosch
[PATCH v3 12/14] video: add nexell video driver (display/video driver) Stefan Bosch
[PATCH v3 13/14] arm: add support for SoC s5p4418 (cpu) / nanopi2 board Stefan Bosch
[PATCH v3 14/14] arm: add (default) config for nanopi2 board Stefan Bosch
Out of bounds access in arch/arm/cpu/armv7/iproc-common/armpll.c Scott Branden
[RESEND PATCH] usb: max3420: add the gadget driver Jassi Brar
[RESEND PATCH] usb: max3420: add the gadget driver Jassi Brar
[RESEND PATCH] usb: max3420: add the gadget driver Jassi Brar
[RESEND PATCH] usb: max3420: add the gadget driver Jassi Brar
Pass disk context to GRUB Garrett Brown
[PATCH] fastboot: Support defining raw partitions without a partition table Filip Brozovic
[GIT PULL] rpi: second round for v2020.07 Matthias Brugger
[GIT PULL] rpi: second round for v2020.07 Matthias Brugger
[GIT PULL] rpi: second round for v2020.07 Matthias Brugger
[PATCH v4 0/9] USB host support for Raspberry Pi 4 board (64-bit) Matthias Brugger
[PATCH v5 0/6] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support Matthias Brugger
[RFC PATCH 3/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address" Matthias Brugger
[RFC PATCH 1/3] xhci: Add polling support for USB keyboards Matthias Brugger
[PATCH 16/30] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig Holger Brunck
[PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable Marek Bykowski
[PATCH 1/2] board: stm32mp1: fix handling of DT OP-TEE reserved memory nodes Patrice CHOTARD
[Uboot-stm32] [PATCH 2/2] dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSI Patrice CHOTARD
[PATCH] ARM: dts: stm32: Reinstate card detect behavior on ST boards Patrice CHOTARD
[PATCH 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default Gregory CLEMENT
[PATCH v2 0/2] ARM: at91: Allow running SPL with DTB append Gregory CLEMENT
[PATCH v2 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default Gregory CLEMENT
[PATCH v2 2/2] configs: atmel: cleanup CONFIG_SPL_SEPARATE_BSS Gregory CLEMENT
[PATCH 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default Gregory CLEMENT
[PATCH] video: check hardware version of DSI Philippe CORNU
[PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions Denis 'GNUtoo' Carikli
[PATCHv5][ 7/7] board: tbs2910: add documentation Denis 'GNUtoo' Carikli
[PATCH 1/2] cmd: booti: Fix spelling of "environment". Vagrant Cascadian
[PATCH 2/2] doc: sifive: Fix spelling of "environment". Vagrant Cascadian
[PATCH] serial: Convert ARM_DCC to Kconfig Luca Ceresoli
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Luca Ceresoli
[PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support Luca Ceresoli
[PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Luca Ceresoli
[PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Luca Ceresoli
[PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Luca Ceresoli
[PATCH] cmd: add clone command John Chau
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Rick Chen
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Rick Chen
[PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01 Rick Chen
[PATCH 1/2] riscv: sbi: Remove sbi_spec_version Rick Chen
[PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01 Rick Chen
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Rick Chen
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Rick Chen
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Rick Chen
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Rick Chen
[PATCH 1/2] riscv: sbi: Remove sbi_spec_version Rick Chen
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Rick Chen
[PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01 Rick Chen
[PATCH 1/2] riscv: sbi: Remove sbi_spec_version Rick Chen
[PATCH v13 00/19] RISC-V SiFive FU540 support SPL Rick Chen
[PATCH v3 0/4] update clock handler and proper cpu features Rick Chen
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Rick Chen
[U-Boot] Pull request: u-boot-riscv/master Rick Chen
[U-Boot] Pull request: u-boot-riscv/master Rick Chen
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Rick Chen
[U-Boot] Pull request: u-boot-riscv/master Rick Chen
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Rick Chen
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Rick Chen
[U-Boot] Pull request: u-boot-riscv/master Rick Chen
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Rick Chen
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Rick Chen
[PATCH v3 2/6] sifive: fu540: Add Booting from SPI Rick Chen
[PATCH v4 2/3] riscv: Expand the DT size before copy reserved memory node Rick Chen
[PATCH v4 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE Rick Chen
[PATCH 1/1] riscv: use log functions in fdt_fixup Rick Chen
[PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter Patrice Chotard
[PATCH] power: pmic: Add SPL Kconfig entry for PFUZE100 Jaehoon Chung
[PATCH 1/7] Revert "mmc: zynq: parse dt when probing" Jaehoon Chung
[PATCH] trivial: Fix booot occurences Jaehoon Chung
[PATCH v2] mmc: sdhci: Fix HISPD bit handling Jaehoon Chung
[PATCH 2/7] mmc: zynq_sdhci: Define timing macro's Jaehoon Chung
[PATCH v3] mmc: sdhci: Fix HISPD bit handling Jaehoon Chung
[PATCH] Fix MMC access on Sabrelite Jaehoon Chung
[PATCH v2] Fix MMC access on Sabrelite Jaehoon Chung
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Jaehoon Chung
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Jaehoon Chung
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Jaehoon Chung
[PATCH v2 1/1] travis-ci: Fix "ResourceWarning: unclosed file" Cristian Ciocaltea
[PATCH] rockchip: rk3399: allow deselecting SPL_ATF_NO_PLATFORM_PARAM Hugh Cole-Baker
[RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional Patrick DELAUNAY
[RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional Patrick DELAUNAY
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Patrick DELAUNAY
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Patrick DELAUNAY
[PATCH] optee: fix copy of optee reserved-memory node Patrick DELAUNAY
[PATCH v4 4/4] test: env: add test for env info sub-command Patrick DELAUNAY
[PATCH 1/2] board: stm32mp1: fix handling of DT OP-TEE reserved memory nodes Patrick DELAUNAY
[PATCH 2/2] dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSI Patrick DELAUNAY
[PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200616 Patrick DELAUNAY
[PATCH v4 4/4] test: env: add test for env info sub-command Patrick DELAUNAY
[PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM Patrick DELAUNAY
[PATCH] ARM: dts: stm32: Reinstate card detect behavior on ST boards Patrick DELAUNAY
[PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM Patrick DELAUNAY
[PATCH v2 3/9] env: correctly handle result in env_init Patrick DELAUNAY
[PATCH v2 5/9] sandbox: support the change of env location Patrick DELAUNAY
[PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200619 Patrick DELAUNAY
[PATCH v2 3/9] env: correctly handle result in env_init Patrick DELAUNAY
[RESEND PATCH v5 4/4] test: env: add test for env info sub-command Patrick DELAUNAY
[PATCH v2 6/9] test: environment in ext4 Patrick DELAUNAY
[RESEND PATCH v5 4/4] test: env: add test for env info sub-command Patrick DELAUNAY
[PATCH v2 3/9] env: correctly handle result in env_init Patrick DELAUNAY
[PATCH] video: check hardware version of DSI Patrick DELAUNAY
[PATCH v1 1/4] video: mipi update panel platform data Patrick DELAUNAY
[PATCH v1 2/4] video: stm32: stm32_dsi: copy DSI fields Patrick DELAUNAY
[PATCH v1 3/4] video: raydium_rm68200: fill characteristics of DSI data link Patrick DELAUNAY
[PATCH v1 4/4] video: orisetech_otm8009a: fill characteristics of DSI data link Patrick DELAUNAY
[PATCH v1 0/4] rework DSI characteristics Patrick DELAUNAY
[PATCH v3 08/14] cmd: env: add env select command Patrick DELAUNAY
[PATCH] board: ti: am654: Disable SA2UL node for HS devices Andrew F. Davis
[PATCH v2 00/11] stm32mp1: activate gpio hog support and add new pinctrl ops Patrick Delaunay
[PATCH v2 01/11] configs: stm32mp1: activate CONFIG_GPIO_HOG Patrick Delaunay
[PATCH v2 02/11] board: stm32mp1: update the gpio hog support Patrick Delaunay
[PATCH v2 03/11] gpio: stm32: add ops set_dir_flags Patrick Delaunay
[PATCH v2 04/11] gpio: stm32: add ops get_dir_flags Patrick Delaunay
[PATCH v2 05/11] gpio: stmfx: move function to prepare new ops introduction Patrick Delaunay
[PATCH v2 06/11] gpio: stmfx: rename function used to change pin configuration Patrick Delaunay
[PATCH v2 07/11] gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg Patrick Delaunay
[PATCH v2 08/11] gpio: stmfx: add ops set_dir_flag Patrick Delaunay
[PATCH v2 09/11] gpio: stmfx: add ops get_dir_flags Patrick Delaunay
[PATCH v2 10/11] pinctrl: stmfx: add information on pin configuration Patrick Delaunay
[PATCH v2 11/11] pinctrl: stm32: add information on pin configuration Patrick Delaunay
[PATCH] optee: fix copy of optee reserved-memory node Patrick Delaunay
[PATCH] optee: copy FDT OP-TEE related nodes before generic FDT changes Patrick Delaunay
[PATCH 1/2] board: stm32mp1: fix handling of DT OP-TEE reserved memory nodes Patrick Delaunay
[PATCH 2/2] dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSI Patrick Delaunay
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Patrick Delaunay
[PATCH] env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR Patrick Delaunay
[PATCH] configs: stm32mp1: activate WATCHDOG Patrick Delaunay
[PATCH 1/4] ram: stm32mp1: protect minimum value in get_bufsize Patrick Delaunay
[PATCH 2/4] ram: stm32mp1: add parameter addr in test FrequencySelectivePattern Patrick Delaunay
[PATCH 3/4] ram: stm32mp1: use the DDR size by default in the test addressBus Patrick Delaunay
[PATCH 4/4] ram: stm32mp1: add size and addr parameter to test all Patrick Delaunay
[PATCH] power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling Patrick Delaunay
[RESEND PATCH 0/3] env: mmc: allow support of mmc_get_env_dev with OF_CONTROL Patrick Delaunay
[RESEND PATCH 1/3] env: mmc: allow support of mmc_get_env_dev with OF_CONTROL Patrick Delaunay
[RESEND PATCH 2/3] env: mmc: correct the offset returned by mmc_offset_try_partition Patrick Delaunay
[RESEND PATCH 3/3] env: mmc: add redundancy support in mmc_offset_try_partition Patrick Delaunay
[PATCH v2 0/3] stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC Patrick Delaunay
[PATCH v2 1/3] stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC Patrick Delaunay
[PATCH v2 2/3] stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent Patrick Delaunay
[PATCH v2 3/3] configs:stm32mp1: activate env config in SPL Patrick Delaunay
[PATCH] stm32mp1: configs: activate CMD_ERASEENV Patrick Delaunay
[PATCH 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info Patrick Delaunay
[PATCH 2/2] stm32mp1: use the command env info in env_check Patrick Delaunay
[PATCH v4 0/4] cmd: env: add option for quiet output on env info Patrick Delaunay
[PATCH v4 1/4] cmd: env: add option for quiet output on env info Patrick Delaunay
[PATCH v4 2/4] cmd: env: check real location for env info command Patrick Delaunay
[PATCH v4 3/4] configs: sandbox: Enable sub command 'env info' Patrick Delaunay
[PATCH v4 4/4] test: env: add test for env info sub-command Patrick Delaunay
[PATCH] stm32mp1: use the command env info -q in env_check Patrick Delaunay
[RESEND PATCH] env: add prototypes for weak function Patrick Delaunay
[PATCH v2 0/9] env: ext4: corrections and add test for env in ext4 Patrick Delaunay
[PATCH v2 1/9] env: add absolute path at CONFIG_ENV_EXT4_FILE Patrick Delaunay
[PATCH v2 2/9] env: ext4: set gd->env_valid Patrick Delaunay
[PATCH v2 3/9] env: correctly handle result in env_init Patrick Delaunay
[PATCH v2 4/9] sandbox: activate env in ext4 support Patrick Delaunay
[PATCH v2 5/9] sandbox: support the change of env location Patrick Delaunay
[PATCH v2 6/9] test: environment in ext4 Patrick Delaunay
[PATCH v2 7/9] env: ext4: introduce new function env_ext4_save_buffer Patrick Delaunay
[PATCH v2 8/9] env: ext4: add support of command env erase Patrick Delaunay
[PATCH v2 9/9] test: sandbox: add test for erase command Patrick Delaunay
[PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x Patrick Delaunay
[PATCH] board: st: stm32mp1: increase teed partition Patrick Delaunay
[PATCH] arm: stm32mp: stm32prog: add "Device Name" in iproduct during DFU USB enumeration Patrick Delaunay
[PATCH] arm: stm32mp: protect DBGMCU_IDC access with BSEC Patrick Delaunay
[PATCH] configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp Patrick Delaunay
[PATCH] Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig Patrick Delaunay
[PATCH] configs: cei-tk1-som: remove CONFIG_ARMV7_PSCI in include file Patrick Delaunay
[PATCH] ARM: dts: stm32: Reinstate card detect behavior on ST boards Patrick Delaunay
[PATCH v5 0/5] cmd: env: add option for quiet output on env info Patrick Delaunay
[PATCH v5 1/5] stm32mp1: use the command env info in env_check Patrick Delaunay
[PATCH v5 2/5] cmd: env: add option for quiet output on env info Patrick Delaunay
[PATCH v5 3/5] cmd: env: check real location for env info command Patrick Delaunay
[PATCH v5 4/5] configs: sandbox: Enable sub command 'env info' Patrick Delaunay
[PATCH v5 5/5] test: env: add test for env info sub-command Patrick Delaunay
[RESEND PATCH v5 0/4] cmd: env: add option for quiet output on env info Patrick Delaunay
[RESEND PATCH v5 1/4] cmd: env: add option for quiet output on env info Patrick Delaunay
[RESEND PATCH v5 2/4] cmd: env: check real location for env info command Patrick Delaunay
[RESEND PATCH v5 3/4] configs: sandbox: Enable sub command 'env info' Patrick Delaunay
[RESEND PATCH v5 4/4] test: env: add test for env info sub-command Patrick Delaunay
[PATCH] env: correct overflow check of env_has_init size Patrick Delaunay
[PATCH] env: add failing trace in env_save Patrick Delaunay
[PATCH v3 00/14] env: ext4: corrections and add test for env in ext4 Patrick Delaunay
[PATCH v3 01/14] env: add absolute path at CONFIG_ENV_EXT4_FILE Patrick Delaunay
[PATCH v3 02/14] env: ext4: set gd->env_valid Patrick Delaunay
[PATCH v3 03/14] env: sf: avoid space in backend name Patrick Delaunay
[PATCH v3 04/14] env: correctly handle env_load_prio Patrick Delaunay
[PATCH v3 05/14] env: nowhere: add .load ops Patrick Delaunay
[PATCH v3 06/14] env: the ops driver load becomes mandatory in struct env_driver Patrick Delaunay
[PATCH v3 07/14] cmd: env: add env load command Patrick Delaunay
[PATCH v3 08/14] cmd: env: add env select command Patrick Delaunay
[PATCH v3 09/14] configs: sandbox: activate env in ext4 support Patrick Delaunay
[PATCH v3 10/14] configs: sandbox: activate command env select and env load Patrick Delaunay
[PATCH v3 11/14] test: environment in ext4 Patrick Delaunay
[PATCH v3 12/14] env: ext4: introduce new function env_ext4_save_buffer Patrick Delaunay
[PATCH v3 13/14] env: ext4: add support of command env erase Patrick Delaunay
[PATCH v3 14/14] test: sandbox: add test for erase command Patrick Delaunay
[PATCH] board: st: move type-c stusb1600 controller code in a driver Patrick Delaunay
[PATCH v3 1/5] imx8mp_evk: spl: drop useless code Fabio Estevam
[PATCH 1/1] arm: wandboard: move CONFIG_MXC_UART to defconfig Fabio Estevam
[PATCH 1/3] mx6slevk_spinor: Convert to DM_ETH Fabio Estevam
[PATCH 2/3] mx6slevk_spl: Convert to DM_ETH Fabio Estevam
[PATCH 3/3] mx6ull_14x14_evk_plugin: Convert to DM_ETH Fabio Estevam
[PATCH 1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support Fabio Estevam
[PATCH 3/3] mx6ul_14x14_evk: Change environment offset to overlap with U-Boot Fabio Estevam
[PATCH 2/3] mx6ul_14x14_evk: Enable eMMC boot support Fabio Estevam
[PATCH 1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support Fabio Estevam
[PATCH 2/2] mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper Fabio Estevam
[PATCH v2] Fix MMC access on Sabrelite Fabio Estevam
[PATCHv5][ 7/7] board: tbs2910: add documentation Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
[PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode Fabio Estevam
[PATCH] phy: atheros: Fix the "qca,clk-out-frequency" example Fabio Estevam
mx6sabresd: Trying to use qca,clk-out-frequency Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
mx6sabresd: Trying to use qca,clk-out-frequency Fabio Estevam
mx6sabresd: Trying to use qca,clk-out-frequency Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
[PATCH] phy: atheros: ar8035: Fix clock output calculation Fabio Estevam
[PATCH] phy: atheros: ar8035: Fix clock output calculation Fabio Estevam
[PATCH 1/4] phy: atheros: ar8035: Fix clock output calculation Fabio Estevam
[PATCH 2/4] net: fec: Allow the PHY node to be retrieved Fabio Estevam
[PATCH 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1 Fabio Estevam
[PATCH 4/4] mx6cuboxi: Convert to DM_ETH Fabio Estevam
[PATCH] video: bmp: Support 8bits BMP to 24/32 bits display Fabio Estevam
[PATCH v2 1/4] phy: atheros: ar8035: Fix clock output calculation Fabio Estevam
[PATCH v2 2/4] net: fec: Allow the PHY node to be retrieved Fabio Estevam
[PATCH v2 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1 Fabio Estevam
[PATCH v2 4/4] mx6cuboxi: Convert to DM_ETH Fabio Estevam
[PATCH v2 4/4] mx6cuboxi: Convert to DM_ETH Fabio Estevam
[PATCH v3 1/4] phy: atheros: ar8035: Fix clock output calculation Fabio Estevam
[PATCH v3 2/4] net: fec: Allow the PHY node to be retrieved Fabio Estevam
[PATCH v3 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1 Fabio Estevam
[PATCH v3 4/4] mx6cuboxi: Convert to DM_ETH Fabio Estevam
[PATCH] ARM: dts: imx6qdl-sabreauto: Fix AR8031 phy-mode Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
[PATCH] pico-imx6ul: Fix Quick Start Guide URL Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
U-Boot atheros PHY support and cubox ethernet Fabio Estevam
[PATCH] ARM: dts: imx6q-tbs2910: Fix Ethernet regression Fabio Estevam
[PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression Fabio Estevam
[PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression Fabio Estevam
U-Boot Logo showing incorrect colors with eLCDIF Fabio Estevam
[PATCH v2 1/1] power: pmic_pca9450: fix PCA9450A I2C address Fabio Estevam
[PATCH v3] spl: allow board_spl_fit_post_load() to fail Peng Fan
[PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg() Peng Fan
[PATCH] Convert CONFIG_MXC_UART to Kconfig Peng Fan
Update of dts files for U-Boot for i.MX Peng Fan
[Pull u-boot-mmc] Please pull mmc-2020-6-15 Peng Fan
[PATCH v2] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready Peng Fan
[PATCH 1/4] Drop global data sdhc_adapter for powerpc Peng Fan
[PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver Peng Fan
Usb on imx8mm Peng Fan
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Peng Fan
[PATCH] ARM: imx: soc: Add reset for non-DM case Peng Fan
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Peng Fan
[PATCH] cmd: mmc: Add mmc reg read command for reading card registers Peng Fan
[PATCH] cmd: mmc: Add mmc reg read command for reading card registers Peng Fan
[PULL] please pull u-boot-mmc mmc-2020-6-24 Peng Fan
[PATCH V2 1/2] clk: imx8mm: fix clk set parent Peng Fan
[PATCH V2 2/2] clk: imx8mm: Add qspi clock Peng Fan
[PATCH] usb: gadget: Fix controller index in UMS Peng Fan
[PATCH] usb: ci_udc: Add function to remove usb device Peng Fan
[PATCH 1/7] usb: ehci-mx6: Add powerup_fixup implementation Peng Fan
[PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support Peng Fan
[PATCH 3/7] usb: ehci-mx6: Turn on the power domain of USB PHY Peng Fan
[PATCH 4/7] usb: ehci-mx6: Update driver to support i.MX8MM Peng Fan
[PATCH 5/7] usb: ehci-mx6: fix controller index for imx8m and imx8 Peng Fan
[PATCH 6/7] usb: ehci-mx6: Enable iMX EHCI driver for iMX8M Nano Peng Fan
[PATCH 7/7] usb: ehci-mx6: configure usb out of suspend state Peng Fan
[PATCH 1/7] sdp: call board_usb_init at spl_sdp_load_image Peng Fan
[PATCH 2/7] f_sdp: Add high speed endpoint descriptor Peng Fan
[PATCH 3/7] f_sdp: Fix wrong usb request size Peng Fan
[PATCH 4/7] f_sdp: Support searching and loading FIT or container image Peng Fan
[PATCH 5/7] spl: add g_dnl_get_board_bcd_device_number Peng Fan
[PATCH 6/7] f_sdp: Add EP1_OUT as default data receive pipe in sdp Peng Fan
[PATCH 7/7] f_sdp: Change bInterval of interrupt endpoint to 3 Peng Fan
[PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support Peng Fan
[PATCH] video: check hardware version of DSI Yannick Fertre
[PATCH v1 0/4] rework DSI characteristics Yannick Fertre
[PATCH v1 1/4] video: mipi update panel platform data Yannick Fertre
[PATCH v1 2/4] video: stm32: stm32_dsi: copy DSI fields Yannick Fertre
[PATCH v1 3/4] video: raydium_rm68200: fill characteristics of DSI data link Yannick Fertre
[PATCH v1 4/4] video: orisetech_otm8009a: fill characteristics of DSI data link Yannick Fertre
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Adam Ford
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Adam Ford
[PATCH] ARM: da850-evm: Remove SPI from SPL when booting from NAND Adam Ford
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Adam Ford
How to fix: partition (SPL) size alignment incorrect Adam Ford
[PATCH 0/2] omap4: panda: convert to device model Adam Ford
GPIO request failures for Renesas rcar-gen3 Adam Ford
[PATCH 0/5] Add Basic support for R8A774A1 (RZ/G2M) Adam Ford
[PATCH 1/5] ARM: renesas: Add basic R8A774A1 Support Adam Ford
[PATCH 2/5] ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1 Adam Ford
[PATCH 3/5] clk: renesas: Add R8A774A1 clock tables Adam Ford
[PATCH 4/5] pinctrl: renesas: Add R8A774A1 PFC tables Adam Ford
[PATCH 5/5] mmc: renesas-sdhi: Enable support for R8A774A1 Adam Ford
GPIO request failures for Renesas rcar-gen3 Adam Ford
GPIO request failures for Renesas rcar-gen3 Adam Ford
GPIO request failures for Renesas rcar-gen3 Adam Ford
[PATCH 4/5] pinctrl: renesas: Add R8A774A1 PFC tables Adam Ford
[PATCH V2 0/5] Add Basic support for R8A774A1 (RZ/G2M) Adam Ford
[PATCH V2 1/5] ARM: renesas: Add basic R8A774A1 Support Adam Ford
[PATCH V2 2/5] ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1 Adam Ford
[PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables Adam Ford
[PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables Adam Ford
[PATCH V2 5/5] mmc: renesas-sdhi: Enable support for R8A774A1 Adam Ford
[PATCH 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit Adam Ford
[PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables Adam Ford
[PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables Adam Ford
[PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables Adam Ford
[PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables Adam Ford
[PATCH v4 12/14] arm: dts: include gpio nodes for card detect Adam Ford
[PATCH v4 12/14] arm: dts: include gpio nodes for card detect Adam Ford
[PATCH] README: davinci: Clarify when SPL is used and the target devices. Adam Ford
[PATCH] ARM: da850-evm: Unify config options with Kconfig Adam Ford
[PATCH V3 0/6] Add Basic support for R8A774A1 (RZ/G2M) Adam Ford
[PATCH V3 1/6] ARM: renesas: Add basic R8A774A1 Support Adam Ford
[PATCH V3 2/6] ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1 Adam Ford
[PATCH V3 3/6] clk: renesas: Add R8A774A1 clock tables Adam Ford
[PATCH V3 4/6] pinctrl: renesas: Enable R8A774A1 PFC tables Adam Ford
[PATCH V3 5/6] mmc: renesas-sdhi: Enable support for R8A774A1 Adam Ford
[PATCH V3 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit Adam Ford
[PATCH 2/4] omap3_beagle: Disable USB support Adam Ford
[PATCH 2/4] omap3_beagle: Disable USB support Adam Ford
[PATCH] omap3_beagle: Finish current outstanding DM migrations Adam Ford
[PATCH v4] net: tftp: Add client support for RFC 7440 Ramon Fried
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Ramon Fried
[PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address Ramon Fried
[PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address Ramon Fried
repurposing dhcp command Ramon Fried
[PATCH] power: axp209: Limit inrush current for A20-OLinuXino_MICRO Cédric Félizard
[PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name() Sughosh Ganu
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image Sughosh Ganu
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image Sughosh Ganu
[PATCH v2 13/17] efi_loader: add firmware management protocol for raw image Sughosh Ganu
[PATCH v2 13/17] efi_loader: add firmware management protocol for raw image Sughosh Ganu
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image Sughosh Ganu
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image Sughosh Ganu
[PATCH 4/4] crypto/fsl: add RNG support Horia Geantă
[PATCH 1/4] crypto/fsl: make SEC%u status line consistent Horia Geantă
[PATCH 2/4] crypto/fsl: export caam_get_era() Horia Geantă
[PATCH 3/4] crypto/fsl: support newer SEC modules Horia Geantă
[PATCH 4/4] crypto/fsl: add RNG support Horia Geantă
[PATCH 4/4] crypto/fsl: add RNG support Horia Geantă
[PATCH] armv8: layerscape: don't remove crypto node on LS1028A Horia Geantă
[PATCH v2 1/6] crypto/fsl: make SEC%u status line consistent Horia Geantă
[PATCH v2 4/6] crypto/fsl: don't regenerate secure keys Horia Geantă
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Horia Geantă
[PATCH v2 6/6] crypto/fsl: add RNG support Horia Geantă
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Horia Geantă
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Horia Geantă
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Horia Geantă
[PATCH] rockchip: Add delay after link-training Peter Geis
[PATCH 0/8] Introduce UCLASS_SOC Dave Gerlach
[PATCH 1/8] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching Dave Gerlach
[PATCH 2/8] test: Add tests for SOC uclass Dave Gerlach
[PATCH 3/8] dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCs Dave Gerlach
[PATCH 4/8] arm: dts: k3-am65-wakeup: Introduce chipid node Dave Gerlach
[PATCH 5/8] arm: dts: k3-j721e-mcu-wakeup: Introduce chipid node Dave Gerlach
[PATCH 6/8] configs: am65x_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 Dave Gerlach
[PATCH 7/8] configs: j721e_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 Dave Gerlach
[PATCH 8/8] arm: mach-k3: Use SOC driver for device identification Dave Gerlach
[PATCH v2 0/2] gpio: Add a managed API Simon Glass
[RFC PATCH 1/1] gpio: Handle NULL pointers gracefully Simon Glass
[PATCH v2 06/10] rtc: add rtc command Simon Glass
[PATCH v2 01/12] drivers: Descend to drivers/soc unconditionally Simon Glass
[PATCH v2 1/2] arm: dts: bcm283x: Allow UARTs to work before relocation Simon Glass
[PATCH v2 06/10] rtc: add rtc command Simon Glass
[PATCH v2 00/10] new rtc methods, rtc command, and tests Simon Glass
[PATCH v2 00/10] new rtc methods, rtc command, and tests Simon Glass
[PATCH 1/6] Update MEM_SUPPORT_64BIT_DATA to be always defined Simon Glass
[PATCH 2/6] cmd: mem: Use a macro to avoid #ifdef in help Simon Glass
[PATCH 3/6] cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATA Simon Glass
[PATCH 4/6] display_options: Drop #ifdef for MEM_SUPPORT_64BIT_DATA Simon Glass
[PATCH 5/6] command: Drop #ifdef for MEM_SUPPORT_64BIT_DATA Simon Glass
[PATCH 6/6] cmd: Add a memory-search command Simon Glass
[PATCH v3 06/10] rtc: add rtc command Simon Glass
[PATCH 6/6] cmd: Add a memory-search command Simon Glass
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Simon Glass
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Simon Glass
[PATCH] doc: driver-model: fix typo in design.rst Simon Glass
[PATCH 6/6] cmd: Add a memory-search command Simon Glass
UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE Simon Glass
[PATCH 6/6] cmd: Add a memory-search command Simon Glass
[PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B) Simon Glass
[PATCH 01/10] dtoc: add support to scan drivers Simon Glass
[PATCH 03/10] dm: doc: update of-plat with the suppor for driver aliases Simon Glass
[PATCH 02/10] dtoc: add option to disable warnings Simon Glass
[PATCH 04/10] core: drop const for struct driver_info Simon Glass
[PATCH 05/10] core: extend struct driver_info to point to device Simon Glass
[PATCH 06/10] dtoc: extend dtoc to use struct driver_info when linking nodes Simon Glass
[PATCH 07/10] dm: doc: update of-plat with new phandle support Simon Glass
[PATCH 08/10] dtoc: update tests to match new platdata Simon Glass
[PATCH 10/10] dtoc add test for cd-gpios Simon Glass
[PATCH 09/10] dtoc: update dtb_platdata to support cd-gpios Simon Glass
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Simon Glass
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Simon Glass
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Simon Glass
[PATCH 1/1] smbios: empty strings in smbios_add_string() Simon Glass
[PATCH v7 2/3] dm: core: fix dev_read_alias_highest_id() without libfdt Simon Glass
UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE Simon Glass
[PATCH 7/8] regmap: Add support for regmap fields Simon Glass
[PATCH] patman: use new --u-boot option with checkpath.pl Simon Glass
[PATCH] patman: use new --u-boot option with checkpath.pl Simon Glass
[PATCH v4 0/6] patman: Support old Python 3 versions Simon Glass
[PATCH v4 1/6] patman: Drop unnecessary import in gitutil Simon Glass
[PATCH v4 2/6] patman: Avoid circular dependency between command and tools Simon Glass
[PATCH v4 3/6] patman: Use a dict in gitutil to avoid importing series Simon Glass
[PATCH v4 4/6] patman: Pass in maintainer dirs to avoid and import Simon Glass
[PATCH v4 5/6] patman: Avoid importing gitutil in settings Simon Glass
[PATCH v4 6/6] patman: Drop import of test_util in test_util Simon Glass
[PATCH 1/1] sandbox: spi: sandbox_sf_state_name() is required Simon Glass
[PATCH 1/2] cmd: booti: Fix spelling of "environment". Simon Glass
[PATCH 1/1] sandbox: handling out of memory Simon Glass
[PATCH] test_sleep.py: make sleep time and margin configurable Simon Glass
[PATCH] tpm: add TPM2_GetRandom command support Simon Glass
Lost patch Simon Glass
[PATCH] patman: use new --u-boot option with checkpath.pl Simon Glass
[PATCH] cmd: Correct the 'md.q' command Simon Glass
[PATCH v2 00/10] cmd: Fix 'md' and add a memory-search command Simon Glass
[PATCH v2 01/10] Update MEM_SUPPORT_64BIT_DATA to be always defined Simon Glass
[PATCH v2 02/10] cmd: mem: Use a macro to avoid #ifdef in help Simon Glass
[PATCH v2 03/10] cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATA Simon Glass
[PATCH v2 04/10] display_options: Drop #ifdef for MEM_SUPPORT_64BIT_DATA Simon Glass
[PATCH v2 05/10] command: Drop #ifdef for MEM_SUPPORT_64BIT_DATA Simon Glass
[PATCH v2 06/10] test: Add a way to check part of a console line or skip it Simon Glass
[PATCH v2 07/10] dm: test: Rename test flags to be generic Simon Glass
[PATCH v2 08/10] console: Always define the console-recording functions Simon Glass
[PATCH v2 09/10] test: Add a flag for tests that need console recording Simon Glass
[PATCH v2 10/10] cmd: Add a memory-search command Simon Glass
[PATCH 6/6] cmd: Add a memory-search command Simon Glass
[PATCH] buildman: Remove _of_#_ from results directory paths Simon Glass
[PATCH] regmap: Check for out-of-range offsets before mapping them Simon Glass
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Simon Glass
[PATCH 1/1] log: uclass_get_name() depends on CONFIG_SPL_DM Simon Glass
[PATCH] test_sleep.py: make sleep time and margin configurable Simon Glass
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Simon Glass
[PATCH 00/15] rockchip: Support building ROM files automatically Simon Glass
[PATCH 01/15] dm: core Fix long line in device_bind_common() Simon Glass
[PATCH 02/15] .gitignore: Ignore Python 3 cache directories Simon Glass
[PATCH 03/15] binman: cbfs: Fix IFWI typo Simon Glass
[PATCH 04/15] binman: Correct the search patch for pylibfdt Simon Glass
[PATCH 05/15] binman: Add support for calling mkimage Simon Glass
[PATCH 06/15] binman: Fix a few typos in the entry docs Simon Glass
[PATCH 07/15] binman: Adjust pylibfdt for incremental build Simon Glass
[PATCH 08/15] x86: rockchip: Change how selection of ROMs works Simon Glass
[PATCH 09/15] rockchip: Allow Bob to use SPI boot Simon Glass
[PATCH 10/15] Allow building .rom files for non-x86 boards Simon Glass
[PATCH 11/15] rockchip: jerry: Add serial support Simon Glass
[PATCH 12/15] rockchip: bob: Support SPI-flash booting Simon Glass
[PATCH 13/15] rockchip: Allow including rockchip dtsi on 32-bit machines Simon Glass
[PATCH 14/15] rockchip: Enable building a SPI ROM image on jerry Simon Glass
[PATCH 15/15] rockchip: Enable building a SPI ROM image on bob Simon Glass
[PATCH v2 05/35] acpi: Support generation of ACPI code Simon Glass
[PATCH v2 11/35] acpi: Support generation of I2C descriptor Simon Glass
[PATCH 01/10] dtoc: add support to scan drivers Simon Glass
[PATCH 01/10] dtoc: add support to scan drivers Simon Glass
U-Boot call on Monday? Simon Glass
[PATCH 01/10] dtoc: add support to scan drivers Simon Glass
[PATCH 01/10] dtoc: add support to scan drivers Simon Glass
Gitlab failure Simon Glass
Gitlab failure Simon Glass
Gitlab failure Simon Glass
Please pull u-boot-dm/next Simon Glass
[PATCH 09/10] dtoc: update dtb_platdata to support cd-gpios Simon Glass
[PATCH v3 00/35] dm: Add programmatic generation of ACPI tables (part B) Simon Glass
[PATCH v3 01/35] dm: core: Add an ACPI name for the root node Simon Glass
[PATCH v3 02/35] acpi: Add a function to get a device path and scope Simon Glass
[PATCH v3 03/35] acpi: Add a way to check device status Simon Glass
[PATCH v3 04/35] irq: Add a method to convert an interrupt to ACPI Simon Glass
[PATCH v3 05/35] acpi: Support generation of ACPI code Simon Glass
[PATCH v3 06/35] acpi: Support generation of interrupt descriptor Simon Glass
[PATCH v3 07/35] gpio: Add a method to convert a GPIO to ACPI Simon Glass
[PATCH v3 08/35] acpi: Support string output Simon Glass
[PATCH v3 09/35] acpi: Support generation of GPIO descriptor Simon Glass
[PATCH v3 10/35] acpi: Support generation of a GPIO/irq for a device Simon Glass
[PATCH v3 11/35] acpi: Support generation of I2C descriptor Simon Glass
[PATCH v3 12/35] acpi: Support generation of SPI descriptor Simon Glass
[PATCH v3 13/35] acpigen: Support writing a length Simon Glass
[PATCH v3 14/35] acpigen: Support writing a package Simon Glass
[PATCH v3 15/35] acpi: Support writing an integer Simon Glass
[PATCH v3 16/35] acpi: Support writing a string Simon Glass
[PATCH v3 17/35] acpi: Support writing a name Simon Glass
[PATCH v3 18/35] acpi: Support writing a UUID Simon Glass
[PATCH v3 19/35] acpi: Support writing Device Properties objects via _DSD Simon Glass
[PATCH v3 20/35] acpi: Support writing a GPIO Simon Glass
[PATCH v3 21/35] acpi: Support copying properties from device tree to ACPI Simon Glass
[PATCH v3 22/35] acpi: Add support for various misc ACPI opcodes Simon Glass
[PATCH v3 23/35] acpi: Add support for writing a Power Resource Simon Glass
[PATCH v3 24/35] acpi: Add support for writing a GPIO power sequence Simon Glass
[PATCH v3 25/35] acpi: Add support for a generic power sequence Simon Glass
[PATCH v3 26/35] acpi: Add support for SSDT generation Simon Glass
[PATCH v3 27/35] x86: acpi: Move MADT down a bit Simon Glass
[PATCH v3 28/35] acpi: Record the items added to SSDT Simon Glass
[PATCH v3 29/35] acpi: Support ordering SSDT data by device Simon Glass
[PATCH v3 30/35] x86: Allow devices to write an SSDT Simon Glass
[PATCH v3 31/35] acpi: Add support for DSDT generation Simon Glass
[PATCH v3 32/35] x86: Allow devices to write to DSDT Simon Glass
[PATCH v3 33/35] pci: Avoid a crash in device_is_on_pci_bus() Simon Glass
[PATCH v3 34/35] dm: acpi: Enhance acpi_get_name() Simon Glass
[PATCH v3 35/35] acpi: Add an acpi command to list/dump generated ACPI items Simon Glass
[PATCH v2 00/49] rockchip: x86: Support building ROM files automatically with binman Simon Glass
[PATCH v2 01/49] dm: core Fix long line in device_bind_common() Simon Glass
[PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories Simon Glass
[PATCH v2 03/49] binman: Output errors to stderr Simon Glass
[PATCH v2 04/49] binman: cbfs: Fix IFWI typo Simon Glass
[PATCH v2 05/49] binman: Correct the search patch for pylibfdt Simon Glass
[PATCH v2 06/49] binman: Specify the toolpath when running test coverage Simon Glass
[PATCH v2 07/49] binman: Add support for calling mkimage Simon Glass
[PATCH v2 08/49] binman: Fix a few typos in the entry docs Simon Glass
[PATCH v2 09/49] binman: Adjust pylibfdt for incremental build Simon Glass
[PATCH v2 10/49] binman: Re-enable concurrent tests Simon Glass
[PATCH v2 11/49] binman: Use super() instead of specifying parent type Simon Glass
[PATCH v2 12/49] binman: Add an etype for external binary blobs Simon Glass
[PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext Simon Glass
[PATCH v2 14/49] binman: Allow external binaries to be missing Simon Glass
[PATCH v2 15/49] patman: Update errors and warnings to use stderr Simon Glass
[PATCH v2 16/49] binman: Detect when valid images are not produced Simon Glass
[PATCH v2 17/49] binman: Allow missing Intel blobs Simon Glass
[PATCH v2 18/49] binman: Allow zero-length entries to overlap Simon Glass
[PATCH v2 19/49] mkimage: Allow updating the FIT timestamp Simon Glass
[PATCH v2 20/49] dtoc: Allow adding variable-sized data to a dtb Simon Glass
[PATCH v2 21/49] binman: Add support for generating a FIT Simon Glass
[PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works Simon Glass
[PATCH v2 23/49] rockchip: Allow Bob to use SPI boot Simon Glass
[PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards Simon Glass
[PATCH v2 25/49] rockchip: jerry: Add serial support Simon Glass
[PATCH v2 26/49] rockchip: bob: Support SPI-flash booting Simon Glass
[PATCH v2 27/49] rockchip: Enable building a SPI ROM image on jerry Simon Glass
[PATCH v2 28/49] rockchip: Enable building a SPI ROM image on bob Simon Glass
[PATCH v2 29/49] tegra: Drop the unused non-binman code Simon Glass
[PATCH v2 30/49] tegra: Don't enable binman on ARMv8 SoCs Simon Glass
[PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y Simon Glass
[PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed Simon Glass
[PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman Simon Glass
[PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM Simon Glass
[PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman Simon Glass
[PATCH v2 36/49] tegra: Makefile: Drop explicit targets built by binman Simon Glass
[PATCH v2 37/49] mediatek: Makefile: Drop explicit targets built by binman Simon Glass
[PATCH v2 38/49] rockchip: Makefile: Drop explicit targets built by binman Simon Glass
[PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later Simon Glass
[PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage Simon Glass
[PATCH v2 41/49] Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be empty Simon Glass
[PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR Simon Glass
[PATCH v2 43/49] rockchip: Convert evb-rk3288 over to use binman Simon Glass
[PATCH v2 44/49] rockchip: Convert evb-rk3229 over to use binman Simon Glass
[PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script Simon Glass
[PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs Simon Glass
[PATCH v2 47/49] x86: chromebook_link64: Correct the image layout Simon Glass
[PATCH v2 48/49] x86: chromebook_panther: Correct the image layout Simon Glass
[PATCH v2 49/49] x86: chromebook_samus_tpl: Correct the image layout Simon Glass
[RESEND v2 1/1] log: don't show function by default Simon Glass
[PATCH] dm: core: Correct comment on uclass_id_foreach_dev() Simon Glass
[PATCH 0/5] patman: Add tests for U-Boot-specific checkpatch checks Simon Glass
[PATCH 1/5] patman: Rename test.py to test_checkpatch.py Simon Glass
[PATCH 2/5] patman: Add a test for the 'possible new uclass' check Simon Glass
[PATCH 3/5] patman: Decode output from the '--show-types' option Simon Glass
[PATCH 4/5] patman: Add tests for the rest of the checkpatch checks Simon Glass
[PATCH 5/5] checkpatch: Don't warn about PREFER_IF in headers/DT files Simon Glass
[PATCH v2 00/25] x86: Enhance MTRR functionality to support multiple CPUs Simon Glass
[PATCH v2 01/25] x86: mp_init: Switch to livetree Simon Glass
[PATCH v2 02/25] x86: Move MP code into mp_init Simon Glass
[PATCH v2 03/25] x86: mp_init: Avoid declarations in header files Simon Glass
[PATCH v2 04/25] x86: mp_init: Switch parameter names in start_aps() Simon Glass
[PATCH v2 05/25] x86: mp_init: Drop the num_cpus static variable Simon Glass
[PATCH v2 06/25] x86: mtrr: Fix 'ensable' typo Simon Glass
[PATCH v2 07/25] x86: mp_init: Set up the CPU numbers at the start Simon Glass
[PATCH v2 08/25] x86: mp_init: Adjust bsp_init() to return more information Simon Glass
[PATCH v2 09/25] x86: cpu: Remove unnecessary #ifdefs Simon Glass
[PATCH v2 10/25] x86: mp: Support APs waiting for instructions Simon Glass
[PATCH v2 11/25] global_data: Add a generic global_data flag for SMP state Simon Glass
[PATCH v2 12/25] x86: Set the SMP flag when MP init is complete Simon Glass
[PATCH v2 13/25] x86: mp: Allow running functions on multiple CPUs Simon Glass
[PATCH v2 14/25] x86: mp: Park CPUs before running the OS Simon Glass
[PATCH v2 15/25] x86: mp: Add iterators for CPUs Simon Glass
[PATCH v2 16/25] x86: mtrr: Use MP calls to list the MTRRs Simon Glass
[PATCH v2 17/25] x86: Don't enable SMP in SPL Simon Glass
[PATCH v2 18/25] x86: coral: Update the memory map Simon Glass
[PATCH v2 19/25] x86: mtrr: Update MTRRs on all CPUs Simon Glass
[PATCH v2 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU Simon Glass
[PATCH v2 21/25] x86: mtrr: Update the command to use the new mtrr calls Simon Glass
[PATCH v2 22/25] x86: mtrr: Restructure so command execution is in one place Simon Glass
[PATCH v2 23/25] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU Simon Glass
[PATCH v2 24/25] x86: mp: Add more comments to the module Simon Glass
[PATCH v2 25/25] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU Simon Glass
[PATCH RESEND v2 1/1] log: don't show function by default Simon Glass
[PATCH v1 00/43] x86: Programmatic generation of ACPI tables (Part C) Simon Glass
[PATCH v1 01/43] binman: Allow setting the ROM offset Simon Glass
[PATCH v1 02/43] binman: Refactor binman_entry_find() to allow other nodes Simon Glass
[PATCH v1 03/43] binman: Add way to locate an entry in memory Simon Glass
[PATCH v1 04/43] acpi: Allow creating the GNVS to fail Simon Glass
[PATCH v1 05/43] dtoc: Support ACPI paths in of-platdata Simon Glass
[PATCH v1 06/43] dm: core: Add a way of overriding the ACPI device path Simon Glass
[PATCH v1 07/43] dm: acpi: Add support for the NHLT table Simon Glass
[PATCH v1 08/43] acpi: Export functions to write sized values Simon Glass
[PATCH v1 09/43] acpi: Support generation of a scope Simon Glass
[PATCH v1 10/43] acpi: Support generation of a generic register Simon Glass
[PATCH v1 11/43] acpi: mmc: Generate ACPI info for the PCI SD Card Simon Glass
[PATCH v1 12/43] x86: Add bindings for NHLT Simon Glass
[PATCH v1 13/43] acpi: Support generation of a device Simon Glass
[PATCH v1 14/43] acpi: Support writing named values Simon Glass
[PATCH v1 15/43] sound: Add an ACPI driver for Dialog Semicondutor da7219 Simon Glass
[PATCH v1 16/43] sound: Add an ACPI driver for Maxim MAX98357ac Simon Glass
[PATCH v1 17/43] x86: pinctrl: Add a way to get the pinctrl reg address Simon Glass
[PATCH v1 18/43] x86: pinctrl: Update comment for intel_pinctrl_get_pad() Simon Glass
[PATCH v1 19/43] x86: pinctrl: Add multi-ACPI control Simon Glass
[PATCH v1 20/43] x86: pinctrl: Set up itss in the probe() method Simon Glass
[PATCH v1 21/43] x86: pinctrl: Drop the acpi_name member Simon Glass
[PATCH v1 22/43] x86: Add support for building up an NHLT structure Simon Glass
[PATCH v1 23/43] x86: Add error checking for csrt table generation Simon Glass
[PATCH v1 24/43] x86: apl: Use memory-mapped access for VBT Simon Glass
[PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO Simon Glass
[PATCH v1 26/43] i2c: designware_i2c: Add a little more debugging Simon Glass
[PATCH v1 27/43] i2c: Add log_ret() on error Simon Glass
[PATCH v1 28/43] i2c: designware_i2c: Support ACPI table generation Simon Glass
[PATCH v1 29/43] p2sb: Add a method to hide the bus Simon Glass
[PATCH v1 30/43] x86: apl: Support set_hide() in p2sb driver Simon Glass
[PATCH v1 31/43] x86: apl: Hide the p2sb on exit from U-Boot Simon Glass
[PATCH v1 32/43] pmc: Move common registers to the header file Simon Glass
[PATCH v1 33/43] x86: irq: Support flags for acpi_gpe Simon Glass
[PATCH v1 34/43] x86: apl: Fix save/restore of ITSS priorities Simon Glass
[PATCH v1 35/43] x86: Add debugging to table writing Simon Glass
[PATCH v1 36/43] x86: apl: Adjust FSP-M code to avoid hard-coded address Simon Glass
[PATCH v1 37/43] x86: Store the coreboot table address in global_data Simon Glass
[PATCH v1 38/43] x86: mp: Allow use of mp_run_on_cpus() without MP Simon Glass
[PATCH v1 39/43] x86: Update the comment about booting for FSP2 Simon Glass
[PATCH v1 40/43] x86: Drop setup_pcat_compatibility() Simon Glass
[PATCH v1 41/43] x86: acpi: Correct the version of the MADT Simon Glass
[PATCH v1 42/43] x86: Rename board_final_cleanup() to board_final_init() Simon Glass
[PATCH v1 43/43] acpi: Enable ACPI table generation by default on x86 Simon Glass
[PATCH 6/6] checkpatch.pl: Request if() instead #ifdef Simon Glass
[PATCH 6/6] checkpatch.pl: Request if() instead #ifdef Simon Glass
[PATCH 01/10] dtoc: add support to scan drivers Simon Glass
[PATCH v2] i2c: eeprom: Use reg property instead of offset and size Simon Glass
[PATCH v4 4/5] dm: pci: Assign controller device node to root bridge Simon Glass
[PATCH v2 29/49] tegra: Drop the unused non-binman code Simon Glass
[RFC PATCH 4/4] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED Simon Glass
[PATCH v3 1/2] log: don't show function by default Simon Glass
[PATCH v3 2/2] log: use BIT() instead of 1 << Simon Glass
[PATCH v4 4/5] dm: pci: Assign controller device node to root bridge Simon Glass
[RFC PATCH] allow choosing -Os/-O2 separately for SPL and TPL Simon Glass
[PATCH v2 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree Simon Glass
[PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support Simon Glass
[PATCH v2 01/10] pinctrl: Add pinmux property support to pinctrl-generic Simon Glass
[PATCH v2 02/10] test: pinmux: Add test for pin muxing Simon Glass
[PATCH v2 05/10] gpio: dw: Fix warnings about casting int to pointer Simon Glass
[PATCH v2 08/10] led: gpio: Default to using node name if label is absent Simon Glass
[PATCH 1/1] sandbox: make RAM size configurable Simon Glass
[RFC PATCH 1/1] gpio: Handle NULL pointers gracefully Simon Glass
[PATCH v2 2/2] test: gpio: Add tests for the managed API Simon Glass
[PATCH v2 0/2] gpio: Add a managed API Simon Glass
[PATCH] test_sleep.py: make sleep time and margin configurable Simon Glass
[PATCH v3 3/5] test/dm: fdtdec: Add the missing gd declaration Simon Glass
[PATCH v3 4/5] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout() Simon Glass
[PATCH v3 5/5] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory() Simon Glass
[PATCH] i2c: eeprom: Use reg property instead of offset and size Simon Glass
[PATCH v3 01/15] board: ns3: add support for Broadcom Northstar 3 Simon Glass
[PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support Simon Glass
[PATCH v3 03/15] configs: ns3: enable clock subsystem Simon Glass
[RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC Simon Glass
[RFC PATCH 2/4] linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }* Simon Glass
[RFC PATCH 3/4] linux/kconfig.h: remove unused helper macros Simon Glass
[PATCH 1/1] doc: random number generation Simon Glass
[PATCH v3 1/6] drivers: Add a new framework for multiplexer devices Simon Glass
[PATCH v3 2/6] dm: board: complete the initialization of the muxes in initr_dm() Simon Glass
[PATCH v3 3/6] drivers: mux: mmio-based syscon mux controller Simon Glass
[PATCH v3 4/6] cmd: Add a mux command Simon Glass
[PATCH v3 5/6] sandbox: Enable memio operations in board_init Simon Glass
[PATCH v2 2/2] test: reset: Add tests for the managed API Simon Glass
[PATCH] regmap: Check for out-of-range offsets before mapping them Simon Glass
Raspberry PI 4 and U-boot Simon Glass
[PATCH v2 5/9] sandbox: support the change of env location Simon Glass
[PATCH v2 9/9] test: sandbox: add test for erase command Simon Glass
[PATCH v2] i2c: eeprom: Use reg property instead of offset and size Simon Glass
[PATCH v2 02/10] test: pinmux: Add test for pin muxing Simon Glass
[PATCH v2 08/10] led: gpio: Default to using node name if label is absent Simon Glass
[PATCH 1/1] gitlab: show skipped Python tests Simon Glass
[PATCH 1/1] gitlab: show skipped Python tests Simon Glass
[PATCH v2 01/14] drivers: rename drivers to match compatible string Simon Glass
[PATCH v2 02/14] dtoc: add missing code comments Simon Glass
[PATCH v2 03/14] dtoc: add support to scan drivers Simon Glass
[PATCH v2 04/14] dtoc: add option to disable warnings Simon Glass
[PATCH v2 05/14] dm: doc: update of-plat with the support for driver aliases Simon Glass
[PATCH v2 06/14] core: drop const for struct driver_info Simon Glass
[PATCH v2 07/14] core: extend struct driver_info to point to device Simon Glass
[PATCH v2 09/14] dm: doc: update of-plat with new phandle support Simon Glass
[PATCH v2 10/14] dtoc: update tests to match new platdata Simon Glass
[PATCH v2 11/14] sandbox: Move section u_boot_list to make it RW Simon Glass
[PATCH v2 12/14] arm: dts: include gpio nodes for card detect Simon Glass
[PATCH v2 13/14] dtoc: update dtb_platdata to support cd-gpios Simon Glass
[PATCH v2 14/14] dtoc add test for cd-gpios Simon Glass
[PATCH 1/1] cmd: fdt: remove CMD_FDT_MAX_DUMP Simon Glass
[PATCH v2 08/14] dtoc: extend dtoc to use struct driver_info when linking nodes Simon Glass
[PATCH v2 00/14] improve OF_PLATDATA support Simon Glass
[PATCH v4 3/4] riscv: cpu: fixes to display proper CPU features Simon Glass
[PATCH v2 02/10] test: pinmux: Add test for pin muxing Simon Glass
[PATCH 1/1] gitlab: show skipped Python tests Simon Glass
[PATCH 1/1] gitlab: show skipped Python tests Simon Glass
[PATCH 1/1] gitlab: show skipped Python tests Simon Glass
[PATCH 03/16] dh_imx6: Switch to full DM-aware Simon Glass
[PATCH v3 04/15] dt-bindings: memory: ns3: add memory definitions Simon Glass
[PATCH v3 05/15] board: ns3: add api to save boot parameters passed from BL31 Simon Glass
[PATCH v3 06/15] board: ns3: default reset type to L3 Simon Glass
[PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address Simon Glass
[PATCH v3 08/15] board: ns3: program GIC LPI tables Simon Glass
[PATCH v3 09/15] configs: ns3: enable GIC ITS LPI table programing Simon Glass
[PATCH v3 10/15] dt-bindings: memory: ns3: add ddr memory definition Simon Glass
[PATCH v3 11/15] board: ns3: define ddr memory layout Simon Glass
[PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory Simon Glass
[PATCH v3 13/15] include/configs: ns3: add env variables for Linux boot Simon Glass
[PATCH v3 14/15] include/configs: ns3: add support for flashing images Simon Glass
[PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform Simon Glass
[PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver Simon Glass
[PATCH v2 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree Simon Glass
[PATCH v4 4/5] dm: pci: Assign controller device node to root bridge Simon Glass
[PATCH v4 1/2] log: don't show function by default Simon Glass
[PATCH v4 6/6] rockchip: make_fit_atf: add signature handling Simon Glass
[PATCH v3 0/5] rockchip: make it possible to sign the u-boot.itb Simon Glass
[PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY Simon Glass
[PATCH v6 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey() Simon Glass
[PATCH v6 3/8] lib: rsa: bring exp_len in line when generating a key_prop Simon Glass
[PATCH v6 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop() Simon Glass
[PATCH v6 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop() Simon Glass
[PATCH v6 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations Simon Glass
[PATCH v6 7/8] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE Simon Glass
[PATCH v6 8/8] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE Simon Glass
[PATCH v4 01/14] drivers: rename drivers to match compatible string Simon Glass
[PATCH v4 02/14] dtoc: add missing code comments Simon Glass
[PATCH v4 03/14] core: add support for U_BOOT_DRIVER_ALIAS Simon Glass
[PATCH v4 04/14] dtoc: add support to scan drivers Simon Glass
[PATCH v4 05/14] dtoc: add option to disable warnings Simon Glass
[PATCH v4 06/14] dm: doc: update of-plat with the support for driver aliases Simon Glass
[PATCH v4 07/14] core: drop const for struct driver_info Simon Glass
[PATCH v4 08/14] core: extend struct driver_info to point to device Simon Glass
[PATCH v4 09/14] sandbox: Move section u_boot_list to make it RW Simon Glass
[PATCH v4 10/14] dtoc: extend dtoc to use struct driver_info when linking nodes Simon Glass
[PATCH v4 11/14] dm: doc: update of-plat with new phandle support Simon Glass
[PATCH v4 12/14] arm: dts: include gpio nodes for card detect Simon Glass
[PATCH v4 13/14] dtoc: update dtb_platdata to support cd-gpios Simon Glass
[PATCH v4 14/14] dtoc: add test for cd-gpios Simon Glass
[PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs Simon Glass
[PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property Simon Glass
[PATCH 2/5] sysreset: syscon: Support value property Simon Glass
[PATCH] common/board_f: Respect original FDT size while relocating Simon Glass
[PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support Simon Glass
[PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs Simon Glass
[PATCH v4 02/14] dtoc: add missing code comments Simon Glass
[PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver Simon Glass
[PATCH] x86: Don't build some unused objects in TPL Simon Glass
[PATCH 1/1] fs: error handling in do_load() Simon Glass
[PATCH 1/1] crypto/fsl: unused value in caam_hash_update() Simon Glass
[PATCH 1/1] gitlab: show skipped Python tests Simon Glass
[PATCH] cmd: add a panic command Simon Glass
[PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory Simon Glass
[PATCH 1/2] vboot: add support for multiple required keys Simon Glass
[PATCH 1/2] vboot: add support for multiple required keys Simon Glass
[PATCH] fs: fat: fix fat iteration Christian Gmeiner
[PATCH] fs: fat: fix fat iteration Christian Gmeiner
[PATCH] arm: socfpga: gen5: Enable cache driver in SPL Simon Goldschmidt
[PATCH v2] arm64: issue ISB after updating system registers Julien Grall
[PATCH v3 0/2] imx: support for conga-QMX8 board Oliver Graute
[PATCH v3] imx: support for conga-QMX8 board Oliver Graute
[PATCH 2/2] hack to boot with 2020.01 Oliver Graute
[PATCH 0/2] omap4: panda: convert to device model Jonathan Gray
[PATCH] Fix MMC access on Sabrelite Jonathan Gray
[PATCH v3 2/4] arm: Remove d2net_v2 board Simon Guinot
[PATCH v3 2/4] arm: Remove d2net_v2 board Simon Guinot
[PATCH v3 4/4] arm: Remove netspace_v2 board Simon Guinot
[PATCH 0/4] Convert LaCie boards to use DM drivers Simon Guinot
[PATCH 1/4] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH Simon Guinot
[PATCH 2/4] arm: kirkwood: switch LaCie boards to sata_mv driver Simon Guinot
[PATCH 3/4] arm: kirkwood: enable DM_USB for LaCie board Simon Guinot
[PATCH 4/4] arm: kirkwood: enable DM_ETH for LaCie board Simon Guinot
[PATCH v3 2/4] arm: Remove d2net_v2 board Simon Guinot
[PATCH 1/4] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH Simon Guinot
[PATCH v2 0/5] Convert LaCie boards to use DM drivers Simon Guinot
[PATCH v2 1/5] arm: kirkwood: add DT spi0 alias to LaCie boards Simon Guinot
[PATCH v2 2/5] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH Simon Guinot
[PATCH v2 3/5] arm: kirkwood: switch LaCie boards to sata_mv driver Simon Guinot
[PATCH v2 4/5] arm: kirkwood: enable DM_USB for LaCie board Simon Guinot
[PATCH v2 5/5] arm: kirkwood: enable DM_ETH for LaCie board Simon Guinot
Please pull u-boot-video/next Anatolij Gustschin
Please pull u-boot-video Anatolij Gustschin
[PATCH v2] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
[PATCH v2] colibri_imx6: fix video stdout in default environment Anatolij Gustschin
[PATCH] cm_fx6: fix video stdout in default environment Anatolij Gustschin
[PATCH] nitrogen6x: update video console name Anatolij Gustschin
[PATCH] video: ipuv3: fix building with disabled panel driver Anatolij Gustschin
[PATCH] video: make backlight and panel drivers optional Anatolij Gustschin
[PATCH 1/8] imx: convert embest boards to DM_VIDEO Anatolij Gustschin
[PATCH 2/8] imx: convert pico-imx6 to DM_VIDEO Anatolij Gustschin
[PATCH 3/8] imx: convert dms-ba16 boards to DM_VIDEO Anatolij Gustschin
[PATCH 4/8] imx: convert cgtqmx6eval board to DM_VIDEO Anatolij Gustschin
[PATCH 5/8] imx: convert mx6cuboxi board to DM_VIDEO Anatolij Gustschin
[PATCH 6/8] imx: convert gwventana board to DM_VIDEO Anatolij Gustschin
[PATCH 7/8] imx: convert mx51evk board to DM_VIDEO Anatolij Gustschin
[PATCH 8/8] imx: convert mx53loco board to DM_VIDEO Anatolij Gustschin
[PATCH] video: make vidconsole commands optional Anatolij Gustschin
[PATCH] video: ipuv3: remove some useless code to reduce binary size Anatolij Gustschin
[PATCH] video: extend stdout video console work-around for 'vga' Anatolij Gustschin
[PATCH] video: bmp: Support 8bits BMP to 24/32 bits display Anatolij Gustschin
[PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer Anatolij Gustschin
[PATCH v1 0/4] rework DSI characteristics Anatolij Gustschin
[PATCH v2] video: bmp: support 8bits BMP drawing on 24/32 bpp framebuffer Anatolij Gustschin
Please pull u-boot-video Anatolij Gustschin
[PATCH] video: rk_vop: Fix wrong bpix for frame buffer Anatolij Gustschin
[PATCH] video: rk_vop: Fix wrong bpix for frame buffer Anatolij Gustschin
[PATCH] video: check hardware version of DSI Anatolij Gustschin
[PATCH v1 1/4] video: mipi update panel platform data Anatolij Gustschin
[PATCH v1 2/4] video: stm32: stm32_dsi: copy DSI fields Anatolij Gustschin
[PATCH v1 3/4] video: raydium_rm68200: fill characteristics of DSI data link Anatolij Gustschin
[PATCH v1 4/4] video: orisetech_otm8009a: fill characteristics of DSI data link Anatolij Gustschin
[PATCH v2] video: bmp: support 8bits BMP drawing on 24/32 bpp framebuffer Anatolij Gustschin
[PATCH] video: vidconsole: avoid multiple lines overwrite logo Anatolij Gustschin
[PATCH] splash: Fix build warning on 64 bits CPU Anatolij Gustschin
U-Boot Logo showing incorrect colors with eLCDIF Anatolij Gustschin
[PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer Anatolij Gustschin
[PATCH] video: rockchip: fix HDMI 4K resolution Anatolij Gustschin
[PATCH] video: rockchip: fix HDMI 4K resolution Anatolij Gustschin
Please pull u-boot-video Anatolij Gustschin
Raspberry PI 4 and U-boot Duncan Hare
[PATCH v4] net: tftp: Add client support for RFC 7440 Ravik Hasija
[PATCH v4] net: tftp: Add client support for RFC 7440 Ravik Hasija
[PATCH 0/7] Add support for CONFIG_API on RISC-V Mitchell Horne
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Z.q. Hou
[PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model Z.q. Hou
[PATCH 01/13] net: fsl_pq_mdio: Add the compatible "fsl, gianfar-mdio" support Z.q. Hou
[PATCHv4 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a) Z.q. Hou
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Z.q. Hou
[PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model Z.q. Hou
[PATCHv3 08/15] dts: powerpc: p1020rdb: Add eTSEC DT nodes Z.q. Hou
[PATCHv3 15/15] configs: P2020RDB: Enable DM_ETH config Z.q. Hou
[PATCHv3 13/15] configs: P1010RDB: Enable DM_ETH config Z.q. Hou
[PATCHv3 12/15] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH Z.q. Hou
[PATCHv3 01/15] net: fsl_mdio: Change to use virtual address Z.q. Hou
[PATCHv3 03/15] net: tsec: convert to use DM_MDIO when DM_ETH enabled Z.q. Hou
[PATCHv3 06/15] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r() Z.q. Hou
[PATCHv3 04/15] net: tsec: Add the compatible string "gianfar" support Z.q. Hou
[PATCHv3 01/36] dm: spi: Convert Freescale ESPI driver to driver model Z.q. Hou
[PATCHv4 0/3] spi: Split CONFIG_DM_SPI* to CONFIG_{SPL_TPL}DM_SPI* Zhiqiang Hou
[PATCHv4 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a) Zhiqiang Hou
[PATCHv4 2/3] spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX) Zhiqiang Hou
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Zhiqiang Hou
[PATCHv2 00/36] spi: fsl-espi: Convert eSPI driver to DM Zhiqiang Hou
[PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model Zhiqiang Hou
[PATCHv2 02/36] powerpc: dts: t2080: add espi controller node support Zhiqiang Hou
[PATCHv2 03/36] powerpc: dts: t2080qds: add espi slave nodes support Zhiqiang Hou
[PATCHv2 04/36] configs: enable espi device module in T2080QDS Zhiqiang Hou
[PATCHv2 05/36] dts: P1020: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 06/36] dts: P1020RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 07/36] configs: P1020RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv2 08/36] dts: P2020: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 09/36] dts: P2020RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 10/36] configs: P2020RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv2 11/36] dts: P2041: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 12/36] dts: P2041RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 13/36] configs: P2041RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv2 14/36] dts: P3041: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 15/36] dts: P3041DS: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 16/36] configs: P3041DS: Enable ESPI driver Zhiqiang Hou
[PATCHv2 17/36] dts: P4080: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 18/36] dts: P4080DS: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 19/36] configs: P4080DS: Enable ESPI driver Zhiqiang Hou
[PATCHv2 20/36] dts: P5040: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 21/36] dts: P5040DS: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 22/36] configs: P5040DS: Enable ESPI driver Zhiqiang Hou
[PATCHv2 23/36] dts: T102x: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 24/36] dts: T1024RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 25/36] configs: T1024RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv2 26/36] dts: T104x: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 27/36] dts: T1042D4RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 28/36] configs: T1042D4RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv2 29/36] dts: T2080RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 30/36] configs: T2080RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv2 31/36] dts: T4240: Add ESPI DT nodes Zhiqiang Hou
[PATCHv2 32/36] dts: T4240RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv2 33/36] configs: T4240RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv2 34/36] dts: P1010: Add eSPI controller DT node Zhiqiang Hou
[PATCHv2 35/36] dts: P1010RDB: Add eSPI slave DT nodes Zhiqiang Hou
[PATCHv2 36/36] configs: P1010RDB: Enable eSPI controller and SPI flash DM driver Zhiqiang Hou
[PATCHv5 0/3] spi: Split CONFIG_DM_SPI* to CONFIG_{SPL_TPL}DM_SPI* Zhiqiang Hou
[PATCHv5 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a) Zhiqiang Hou
[PATCHv5 2/3] spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX) Zhiqiang Hou
[PATCHv5 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Zhiqiang Hou
[PATCHv3 00/36] spi: fsl-espi: Convert eSPI driver to DM Zhiqiang Hou
[PATCHv3 01/36] dm: spi: Convert Freescale ESPI driver to driver model Zhiqiang Hou
[PATCHv3 02/36] powerpc: dts: t2080: add espi controller node support Zhiqiang Hou
[PATCHv3 03/36] powerpc: dts: t2080qds: add espi slave nodes support Zhiqiang Hou
[PATCHv3 04/36] configs: enable espi device module in T2080QDS Zhiqiang Hou
[PATCHv3 05/36] dts: P1020: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 06/36] dts: P1020RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 07/36] configs: P1020RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv3 08/36] dts: P2020: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 09/36] dts: P2020RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 10/36] configs: P2020RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv3 11/36] dts: P2041: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 12/36] dts: P2041RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 13/36] configs: P2041RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv3 14/36] dts: P3041: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 15/36] dts: P3041DS: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 16/36] configs: P3041DS: Enable ESPI driver Zhiqiang Hou
[PATCHv3 17/36] dts: P4080: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 18/36] dts: P4080DS: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 19/36] configs: P4080DS: Enable ESPI driver Zhiqiang Hou
[PATCHv3 20/36] dts: P5040: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 21/36] dts: P5040DS: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 22/36] configs: P5040DS: Enable ESPI driver Zhiqiang Hou
[PATCHv3 23/36] dts: T102x: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 24/36] dts: T1024RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 25/36] configs: T1024RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv3 26/36] dts: T104x: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 27/36] dts: T1042D4RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 28/36] configs: T1042D4RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv3 29/36] dts: T2080RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 30/36] configs: T2080RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv3 31/36] dts: T4240: Add ESPI DT nodes Zhiqiang Hou
[PATCHv3 32/36] dts: T4240RDB: Add ESPI slave device node Zhiqiang Hou
[PATCHv3 33/36] configs: T4240RDB: Enable ESPI driver Zhiqiang Hou
[PATCHv3 34/36] dts: P1010: Add eSPI controller DT node Zhiqiang Hou
[PATCHv3 35/36] dts: P1010RDB: Add eSPI slave DT nodes Zhiqiang Hou
[PATCHv3 36/36] configs: P1010RDB: Enable eSPI controller and SPI flash DM driver Zhiqiang Hou
[PATCHv2 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH Zhiqiang Hou
[PATCHv2 01/13] net: fsl_pq_mdio: Add the compatible "fsl, gianfar-mdio" support Zhiqiang Hou
[PATCHv2 02/13] net: tsec: Add the compatible string "gianfar" support Zhiqiang Hou
[PATCHv2 03/13] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled Zhiqiang Hou
[PATCHv2 04/13] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r() Zhiqiang Hou
[PATCHv2 05/13] configs: p1_p2_rdb: Add the default address of vsc7385 firmware Zhiqiang Hou
[PATCHv2 06/13] dts: powerpc: p1020rdb: Add eTSEC DT nodes Zhiqiang Hou
[PATCHv2 07/13] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled Zhiqiang Hou
[PATCHv2 08/13] configs: P1020RDB: Enable DM_ETH config Zhiqiang Hou
[PATCHv2 09/13] dts: powerpc: p1010rdb: Add eTSEC DT nodes Zhiqiang Hou
[PATCHv2 10/13] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH Zhiqiang Hou
[PATCHv2 11/13] configs: P1010RDB: Enable DM_ETH config Zhiqiang Hou
[PATCHv2 12/13] dts: powerpc: p2020rdb: Add eTSEC DT nodes Zhiqiang Hou
[PATCHv2 13/13] configs: P2020RDB: Enable DM_ETH config Zhiqiang Hou
[PATCHv3 00/13] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH Zhiqiang Hou
[PATCHv3 01/15] net: fsl_mdio: Change to use virtual address Zhiqiang Hou
[PATCHv3 02/15] net: fsl_mdio: Correct the MII management register block address Zhiqiang Hou
[PATCHv3 03/15] net: tsec: convert to use DM_MDIO when DM_ETH enabled Zhiqiang Hou
[PATCHv3 04/15] net: tsec: Add the compatible string "gianfar" support Zhiqiang Hou
[PATCHv3 05/15] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled Zhiqiang Hou
[PATCHv3 06/15] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r() Zhiqiang Hou
[PATCHv3 07/15] configs: p1_p2_rdb: Add the default address of vsc7385 firmware Zhiqiang Hou
[PATCHv3 08/15] dts: powerpc: p1020rdb: Add eTSEC DT nodes Zhiqiang Hou
[PATCHv3 09/15] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled Zhiqiang Hou
[PATCHv3 10/15] configs: P1020RDB: Enable DM_ETH config Zhiqiang Hou
[PATCHv3 11/15] dts: powerpc: p1010rdb: Add eTSEC DT nodes Zhiqiang Hou
[PATCHv3 12/15] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH Zhiqiang Hou
[PATCHv3 13/15] configs: P1010RDB: Enable DM_ETH config Zhiqiang Hou
[PATCHv3 14/15] dts: powerpc: p2020rdb: Add eTSEC DT nodes Zhiqiang Hou
[PATCHv3 15/15] configs: P2020RDB: Enable DM_ETH config Zhiqiang Hou
[Resend PATCHv3 02/15] net: fsl_mdio: Correct the MII management register block address Zhiqiang Hou
[PATCH] arm64: ls1043a: Remove the workaround of erratum A-009929 Zhiqiang Hou
[PATCH 1/2] ARM: dts: sama5d4: fix gadget endpoint address warning Eugen Hristev
[PATCH 2/2] ARM: dts: sama5d3: fix gadget endpoint address warning Eugen Hristev
[PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees Jon Hunter
[PATCH 2/2] ARM: tegra: Enable PSCI support for Tegra210 and Tegra186 Jon Hunter
[PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees Jon Hunter
[PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board Priyanka Jain
ddr: Rework errata A008109, A008378, 009942 workaround Priyanka Jain
pull request of u-boot-mpc85xx for v2020.07 Priyanka Jain
[EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory Priyanka Jain
[EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory Priyanka Jain
[PATCH] zfs: fix missing include for disk_partition definition Joel Johnson
[PATCH v1 0/1] Fix mkimage error message Mylène Josserand
[PATCH v1 1/1] mkimage: Fix error message if write less data then expected Mylène Josserand
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Nicolas Saenz Julienne
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Nicolas Saenz Julienne
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Nicolas Saenz Julienne
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Nicolas Saenz Julienne
[PATCH v4 0/5] usb: xhci: Load Raspberry Pi 4 VL805's firmware Nicolas Saenz Julienne
[PATCH v4 1/5] arm: rpi: Add function to trigger VL805's firmware load Nicolas Saenz Julienne
[PATCH v4 2/5] reset: Add Raspberry Pi 4 firmware reset controller Nicolas Saenz Julienne
[PATCH v4 3/5] configs: Enable support for reset controllers on RPi4 Nicolas Saenz Julienne
[PATCH v4 4/5] dm: pci: Assign controller device node to root bridge Nicolas Saenz Julienne
[PATCH v4 5/5] usb: xhci-pci: Add reset controller support Nicolas Saenz Julienne
[PATCH v4 5/5] usb: xhci-pci: Add reset controller support Nicolas Saenz Julienne
USB patch for rpi4 Nicolas Saenz Julienne
[PATCH v4 4/5] dm: pci: Assign controller device node to root bridge Nicolas Saenz Julienne
[PATCH v4 4/5] dm: pci: Assign controller device node to root bridge Nicolas Saenz Julienne
[PATCH v5 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware Nicolas Saenz Julienne
[PATCH v5 1/4] arm: rpi: Add function to trigger VL805's firmware load Nicolas Saenz Julienne
[PATCH v5 2/4] reset: Add Raspberry Pi 4 firmware reset controller Nicolas Saenz Julienne
[PATCH v5 3/4] configs: Enable support for reset controllers on RPi4 Nicolas Saenz Julienne
[PATCH v5 4/4] usb: xhci: Add reset controller support Nicolas Saenz Julienne
[PATCH v5 4/4] usb: xhci: Add reset controller support Nicolas Saenz Julienne
[PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware Nicolas Saenz Julienne
[PATCH v6 1/4] arm: rpi: Add function to trigger VL805's firmware load Nicolas Saenz Julienne
[PATCH v6 2/4] reset: Add Raspberry Pi 4 firmware reset controller Nicolas Saenz Julienne
[PATCH v6 3/4] configs: Enable support for reset controllers on RPi4 Nicolas Saenz Julienne
[PATCH v6 4/4] usb: xhci: Add reset controller support Nicolas Saenz Julienne
[PATCH 1/2] rockchip: rockpro64: Store default env into SPI Marcin Juszkiewicz
[PATCH 2/2] rockchip: rockpro64: add SPI boot Marcin Juszkiewicz
[PATCH] rockchip: rockpro64: initialize USB in preboot Marcin Juszkiewicz
[PATCH] sata_sil: make it buildable with DM_PCI Marcin Juszkiewicz
[PATCH 1/3] rockchip: Pinebook Pro: enable rng to provide an entropy source Marcin Juszkiewicz
[PATCH v3 0/4] update clock handler and proper cpu features Sagar Kadam
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Sagar Kadam
[PATCH v4 0/4] update clock handler and proper cpu features Sagar Kadam
[PATCH v4 4/4] riscv: cpu: check and append L1 cache to cpu features Sagar Kadam
[PATCH v4 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases Sagar Kadam
[PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's Sagar Kadam
[PATCH 2/5] fu540: prci: use common reset indexes defined in binding header Sagar Kadam
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Sagar Kadam
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Sagar Kadam
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Sagar Kadam
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Sagar Kadam
[PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on Sagar Kadam
[PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci Sagar Kadam
[PATCH 5/5] riscv: sifive: fu540: Add gpio-restart support Sagar Kadam
[PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on Sagar Kadam
[PATCH v5 3/3] riscv: cpu: check and append L1 cache to cpu features Sagar Kadam
[PATCH v6 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit Sagar Kadam
[PATCH v6 2/4] uclass: cpu: fix to display proper CPU features Sagar Kadam
[PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci Sagar Kadam
[PATCH v3 0/4] update clock handler and proper cpu features Sagar Shrikant Kadam
[PATCH v3 1/4] fu540: prci: add request and free clock handlers Sagar Shrikant Kadam
[PATCH v3 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases Sagar Shrikant Kadam
[PATCH v3 3/4] riscv: cpu: fixes to display proper CPU features Sagar Shrikant Kadam
[PATCH v3 4/4] riscv: cpu: check and append L1 cache to cpu features Sagar Shrikant Kadam
[PATCH v4 0/4] update clock handler and proper cpu features Sagar Shrikant Kadam
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Sagar Shrikant Kadam
[PATCH v4 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases Sagar Shrikant Kadam
[PATCH v4 3/4] riscv: cpu: fixes to display proper CPU features Sagar Shrikant Kadam
[PATCH v4 4/4] riscv: cpu: check and append L1 cache to cpu features Sagar Shrikant Kadam
[PATCH 0/5] add DM based reset driver for SiFive SoC's Sagar Shrikant Kadam
[PATCH 1/5] dt-bindings: prci: add indexes for reset signals available in prci Sagar Shrikant Kadam
[PATCH 2/5] fu540: prci: use common reset indexes defined in binding header Sagar Shrikant Kadam
[PATCH 3/5] fu540: dtsi: add reset producer and consumer entries Sagar Shrikant Kadam
[PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's Sagar Shrikant Kadam
[PATCH 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC Sagar Shrikant Kadam
[PATCH v2 0/5] add DM based reset driver for SiFive SoC's Sagar Shrikant Kadam
[PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci Sagar Shrikant Kadam
[PATCH v2 2/5] fu540: prci: use common reset indexes defined in binding header Sagar Shrikant Kadam
[PATCH v2 3/5] fu540: dtsi: add reset producer and consumer entries Sagar Shrikant Kadam
[PATCH v2 4/5] sifive: reset: add DM based reset driver for SiFive SoC's Sagar Shrikant Kadam
[PATCH v2 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC Sagar Shrikant Kadam
[PATCH v6 0/4] update clock handler and proper cpu features Sagar Shrikant Kadam
[PATCH v6 1/4] riscv: dts: hifive-unleashed-a00: add cpu aliases Sagar Shrikant Kadam
[PATCH v6 2/4] uclass: cpu: fix to display proper CPU features Sagar Shrikant Kadam
[PATCH v6 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit Sagar Shrikant Kadam
[PATCH v6 4/4] riscv: cpu: check and append L1 cache to cpu features Sagar Shrikant Kadam
[PATCH v7 0/4] update clock handler and proper cpu features Sagar Shrikant Kadam
[PATCH v7 1/4] riscv: dts: hifive-unleashed-a00: add cpu aliases Sagar Shrikant Kadam
[PATCH v7 2/4] uclass: cpu: fix to display proper CPU features Sagar Shrikant Kadam
[PATCH v7 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit Sagar Shrikant Kadam
[PATCH v7 4/4] riscv: cpu: check and append L1 cache to cpu features Sagar Shrikant Kadam
[PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399 Mark Kettenis
[PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64 Mark Kettenis
[PATCH v2 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399 Mark Kettenis
[PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399 Mark Kettenis
[ANN] U-Boot v2020.07-rc4 released Mark Kettenis
[PATCH] regulator: fix: enable gpio when requested Mark Kettenis
[PATCH 1/1] fastboot: add support for 'reboot fastboot' command Alex Kiernan
[PATCH v2] Fix MMC access on Sabrelite Troy Kisky
[PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC Jan Kiszka
[PATCH 0/3] watchdog: K3: Add RTI watchdog support Jan Kiszka
[PATCH 1/3] watchdog: Add support for K3 RTI watchdog Jan Kiszka
[PATCH 2/3] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
[PATCH 3/3] arm: dts: k3: Add RTI watchdogs Jan Kiszka
[PATCH v2 0/3] watchdog: K3: Add RTI watchdog support Jan Kiszka
[PATCH v2 1/3] watchdog: Add support for K3 RTI watchdog Jan Kiszka
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
[PATCH v2 3/3] arm: dts: k3: Add RTI watchdogs Jan Kiszka
[PATCH v2 1/3] watchdog: Add support for K3 RTI watchdog Jan Kiszka
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
[PATCH] Makefile: Silence relocate-rela call Jan Kiszka
[PATCH] arm: k3: Consolidate and silence k3_fit_atf.sh call Jan Kiszka
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Jan Kiszka
Setting DEVICE_TREE for xilinx_zynq_virt_defconfig? Florian Klink
[PATCH] rockchip: i2c: fix switch to new implementation for rk3188 Alexander Kochetkov
[PATCH 0/2] v2: rr3188: change APP to 600MHz and enable bwadj for DPLL Alexander Kochetkov
[PATCH 1/2] rockchip: clk: rk3188: change APLL to safe 600MHz Alexander Kochetkov
[PATCH 2/2] rockchip: clk: rk3188: enable bwadj for rk3188 DPLL Alexander Kochetkov
[PATCH] rockchip: rk3188: Fix back to BROM boot Alexander Kochetkov
[PATCH] rockchip: i2c: fix switch to new implementation for rk3188 Alexander Kochetkov
[PATCH 2/2] rockchip: clk: rk3188: enable bwadj for rk3188 DPLL Alexander Kochetkov
[PATCH v1 04/15] arm: dts: ns3: add gpio node Rayagonda Kokatanur
[PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon Rayagonda Kokatanur
[PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon Rayagonda Kokatanur
[PATCH v2] i2c: octeon_i2c: Add I2C controller driver for Octeon Rayagonda Kokatanur
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v3 00/15] add initial support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v3 01/15] board: ns3: add support for Broadcom Northstar 3 Rayagonda Kokatanur
[PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support Rayagonda Kokatanur
[PATCH v3 03/15] configs: ns3: enable clock subsystem Rayagonda Kokatanur
[PATCH v3 04/15] dt-bindings: memory: ns3: add memory definitions Rayagonda Kokatanur
[PATCH v3 05/15] board: ns3: add api to save boot parameters passed from BL31 Rayagonda Kokatanur
[PATCH v3 06/15] board: ns3: default reset type to L3 Rayagonda Kokatanur
[PATCH v3 07/15] dt-bindings: memory: ns3: update GIC LPI address Rayagonda Kokatanur
[PATCH v3 08/15] board: ns3: program GIC LPI tables Rayagonda Kokatanur
[PATCH v3 09/15] configs: ns3: enable GIC ITS LPI table programing Rayagonda Kokatanur
[PATCH v3 10/15] dt-bindings: memory: ns3: add ddr memory definition Rayagonda Kokatanur
[PATCH v3 11/15] board: ns3: define ddr memory layout Rayagonda Kokatanur
[PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory Rayagonda Kokatanur
[PATCH v3 13/15] include/configs: ns3: add env variables for Linux boot Rayagonda Kokatanur
[PATCH v3 14/15] include/configs: ns3: add support for flashing images Rayagonda Kokatanur
[PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform Rayagonda Kokatanur
[PATCH v2 0/8] add basic driver support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v2 1/8] configs: ns3: enable pinctrl driver Rayagonda Kokatanur
[PATCH v2 2/8] dt-bindings: pinctrl: add ns3 pads definition Rayagonda Kokatanur
[PATCH v2 3/8] configs: ns3: enable BCM IPROC mmc driver Rayagonda Kokatanur
[PATCH v2 4/8] configs: ns3: enable mmc commands Rayagonda Kokatanur
[PATCH v2 5/8] configs: ns3: enable gpt commands Rayagonda Kokatanur
[PATCH v2 6/8] configs: ns3: enable EXT4 and FAT fs support Rayagonda Kokatanur
[PATCH v2 7/8] configs: ns3: enable sp805 watchdog driver Rayagonda Kokatanur
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Rayagonda Kokatanur
[PATCH v2 0/3] add FIT image support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v2 1/3] configs: ns3: enable FIT config Rayagonda Kokatanur
[PATCH v2 2/3] board: ns3: add FIT image its file Rayagonda Kokatanur
[PATCH v2 3/3] board: ns3: add development keys used in FIT Rayagonda Kokatanur
[PATCH v3 0/2] add optee support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver Rayagonda Kokatanur
[PATCH v3 2/2] configs: ns3: enable tee and optee driver Rayagonda Kokatanur
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Rayagonda Kokatanur
[PATCH v3 03/15] configs: ns3: enable clock subsystem Rayagonda Kokatanur
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Rayagonda Kokatanur
[PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support Rayagonda Kokatanur
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Rayagonda Kokatanur
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Rayagonda Kokatanur
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Rayagonda Kokatanur
[PATCH v3 0/7] add basic driver support for broadcom NS3 soc Rayagonda Kokatanur
[PATCH v3 1/7] configs: ns3: enable pinctrl driver Rayagonda Kokatanur
[PATCH v3 2/7] dt-bindings: pinctrl: add ns3 pads definition Rayagonda Kokatanur
[PATCH v3 3/7] configs: ns3: enable BCM IPROC mmc driver Rayagonda Kokatanur
[PATCH v3 4/7] configs: ns3: enable mmc commands Rayagonda Kokatanur
[PATCH v3 5/7] configs: ns3: enable gpt commands Rayagonda Kokatanur
[PATCH v3 6/7] configs: ns3: enable EXT4 and FAT fs support Rayagonda Kokatanur
[PATCH v3 7/7] configs: ns3: enable sp805 watchdog driver Rayagonda Kokatanur
[PATCH v3 1/1] phy: add support for stingray PAXB PHY controller Rayagonda Kokatanur
[PATCH v3 02/15] arm: cpu: armv8: add L3 memory flush support Rayagonda Kokatanur
[PATCH v3 12/15] board: ns3: limit U-boot relocation within 16MB memory Rayagonda Kokatanur
[PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform Rayagonda Kokatanur
[PATCH v3 05/15] board: ns3: add api to save boot parameters passed from BL31 Rayagonda Kokatanur
[PATCH v3 13/15] include/configs: ns3: add env variables for Linux boot Rayagonda Kokatanur
[PATCH v3 1/2] drivers: tee: broadcom: add optee based bnxt fw load driver Rayagonda Kokatanur
[PATCH v3 06/15] board: ns3: default reset type to L3 Rayagonda Kokatanur
[PATCH 1/1] fastboot: add support for 'reboot fastboot' command Roman Kovalivskyi
[PATCH v2 0/2] Add support for booting into userspace fastboot Roman Kovalivskyi
[PATCH v2 1/2] fastboot: add support for 'reboot fastboot' command Roman Kovalivskyi
[PATCH v2 2/2] fastboot: add default fastboot_set_reboot_flag implementation Roman Kovalivskyi
[PATCH v3 0/3] Add support for booting into userspace fastboot Roman Kovalivskyi
[PATCH v3 1/3] fastboot: Extend fastboot_set_reboot_flag with reboot reason Roman Kovalivskyi
[PATCH v3 2/3] fastboot: Add support for 'reboot fastboot' command Roman Kovalivskyi
[PATCH v3 3/3] fastboot: Add default fastboot_set_reboot_flag implementation Roman Kovalivskyi
[PATCH v4 0/3] Add support for booting into userspace fastboot Roman Kovalivskyi
[PATCH v4 1/3] fastboot: Extend fastboot_set_reboot_flag with reboot reason Roman Kovalivskyi
[PATCH v4 2/3] fastboot: Add support for 'reboot fastboot' command Roman Kovalivskyi
[PATCH v4 3/3] fastboot: Add default fastboot_set_reboot_flag implementation Roman Kovalivskyi
[PATCH 0/2] omap4: panda: convert to device model Tero Kristo
[PATCH 1/2] omap4: Copy device tree from Linux 5.7.y Tero Kristo
[PATCH 2/2] omap4: panda: convert to device model Tero Kristo
[PATCH 0/2] omap5 uevm: convert to device model Tero Kristo
[PATCH 1/2] omap5: Copy device tree from linux 5.7.y Tero Kristo
[PATCH 2/2] omap5: uevm: convert to device model Tero Kristo
[PATCH 0/4] Some reserved memory hardenings Tero Kristo
[PATCH 1/4] lmb/bdinfo: dump lmb info via bdinfo Tero Kristo
[PATCH 2/4] image: fdt: bail out with error if no boot time FDT image found Tero Kristo
[PATCH 3/4] common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image Tero Kristo
[PATCH 4/4] cmd: booti: convert the debug print about image move to printf Tero Kristo
[PATCH 0/2] omap4: panda: convert to device model Tero Kristo
[PATCHv2 0/2] omap4: convert panda board to DM Tero Kristo
[PATCHv2 1/2] omap4: Copy device tree from Linux 5.7.y Tero Kristo
[PATCHv2 2/2] omap4: panda: convert to device model Tero Kristo
[PATCH 2/2] omap4: sdp: convert to device model Tero Kristo
[PATCH 0/2] omap4: panda: convert to device model Tero Kristo
[PATCH 0/2] omap4: panda: convert to device model Tero Kristo
[PATCHv3 0/6] omap4/omap5: convert to DM model Tero Kristo
[PATCHv3 1/6] omap4: Copy device tree from Linux 5.7.y Tero Kristo
[PATCHv3 2/6] omap4: panda: convert to device model Tero Kristo
[PATCHv3 3/6] omap4: Copy device tree from Linux 5.7.y for SDP4430 Tero Kristo
[PATCHv3 4/6] omap4: sdp: convert to device model Tero Kristo
[PATCHv3 5/6] omap5: Copy device tree from linux 5.7.y Tero Kristo
[PATCHv3 6/6] omap5: uevm: convert to device model Tero Kristo
U-Boot mainline: Digilent Zybo-Z7 support Johannes Krottmayer
U-Boot mainline: Digilent Zybo-Z7 support Johannes Krottmayer
U-Boot mainline: Digilent Zybo-Z7 support Johannes Krottmayer
[PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card Johannes Krottmayer
[PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card Johannes Krottmayer
[PATCH v2] doc: board: xilinx: zynq.rst: add description how to flash a SD card Johannes Krottmayer
GRUB Multiboot specification equivalent implementation from U-Boot - reserved memory regions Johannes Krottmayer
PINE64 Rock64 - How to get SPI driver working Johannes Krottmayer
[PATCH 1/4] mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers Mikhail Kshevetskiy
[PATCH 2/4] mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB Mikhail Kshevetskiy
[PATCH 3/4] mtd: spinand: Do not erase the block before writing a bad block marker Mikhail Kshevetskiy
[PATCH 4/4] mtd: spinand: enable erasing of bad mtd blocks Mikhail Kshevetskiy
[PATCH 1/2] spi: make spi-mem driver usable without CONFIG_DM_SPI, drop NODM variant Mikhail Kshevetskiy
[PATCH 2/2] mtd: make spinand driver usable without CONFIG_DM Mikhail Kshevetskiy
microSD Breakout Port Faruk Kılavuz
[v2] I2C: ls1043a, ls1046a: enable SYS_I2C_MXC Biwen Li
[PATCH 1/3] Watchdog: introduce ARM SBSA watchdog driver Biwen Li
[PATCH 2/3] arm64: lx2160a: dts: Add watchdog node Biwen Li
[PATCH 3/3] configs: lx2160a: Enable Watchdog support Biwen Li
[v2 1/3] Watchdog: introduce ARM SBSA watchdog driver Biwen Li
[v2 2/3] arm64: lx2160a: dts: Add watchdog node Biwen Li
[v2 3/3] configs: lx2160a: Enable Watchdog support Biwen Li
[v3 1/3] Watchdog: introduce ARM SBSA watchdog driver Biwen Li
[v3 2/3] arm64: lx2160a: dts: Add watchdog node Biwen Li
[v3 3/3] configs: lx2160a: Enable Watchdog support Biwen Li
[v4 1/3] Watchdog: introduce ARM SBSA watchdog driver Biwen Li
[v4 2/3] arm64: lx2160a: dts: Add watchdog node Biwen Li
[v4 3/3] configs: lx2160a: Enable Watchdog support Biwen Li
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Jason Li
[EXT] [PATCH v2 1/1] imx: rom api: fix image offset computation Ye Li
[PATCH 1/2] spi: fsl_qspi: Add support for i.MX7ULP Ye Li
[PATCH 2/2] spi: fsl_qspi: Support to use full AHB space on i.MX Ye Li
[PATCH 1/3] misc: scu_api: Add SCFW API to get the index of boot container set Ye Li
[PATCH 2/3] spl: mmc: Move the eMMC boot part index to weak function Ye Li
[PATCH 3/3] imx8: spl: Support booting from secondary container set Ye Li
[PATCH 1/2] gpio: mxc_gpio: change gpio index for i.MX8 Ye Li
[PATCH 2/2] arm: dts: imx: fsl-imx8qm.dtsi: fix gpio aliases Ye Li
[PATCH] misc: scu: Remove child dev bind Ye Li
[PATCH] i2c: imx_lpi2c: Improve the codes to use private data Ye Li
[PATCH] gpio: mxc_gpio: Improve to use ofdata_to_platdata Ye Li
[PATCH] video: vidconsole: avoid multiple lines overwrite logo Ye Li
[PATCH] splash: Fix build warning on 64 bits CPU Ye Li
[PATCH] video: bmp: Support 8bits BMP to 24/32 bits display Ye Li
[EXT] [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Ye Li
[PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Ye Li
[EXT] Re: [PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Ye Li
[EXT] [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address Ye Li
[EXT] [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address Ye Li
[PATCH 1/1] riscv: Fix linking error when building u-boot-spl with no SMP support Leo Yu-Chi Liang
[PATCH] rockchip: Add delay after link-training Shawn Lin
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Walter Lozano
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Walter Lozano
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Walter Lozano
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Walter Lozano
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Walter Lozano
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Walter Lozano
[PATCH 01/10] dtoc: add support to scan drivers Walter Lozano
[PATCH 02/10] dtoc: add option to disable warnings Walter Lozano
[PATCH 05/10] core: extend struct driver_info to point to device Walter Lozano
[PATCH 07/10] dm: doc: update of-plat with new phandle support Walter Lozano
[PATCH 09/10] dtoc: update dtb_platdata to support cd-gpios Walter Lozano
[PATCH v1 1/1] mkimage: Fix error message if write less data then expected Walter Lozano
[PATCH 01/10] dtoc: add support to scan drivers Walter Lozano
[PATCH 01/10] dtoc: add support to scan drivers Walter Lozano
[PATCH 01/10] dtoc: add support to scan drivers Walter Lozano
[PATCH 01/10] dtoc: add support to scan drivers Walter Lozano
[PATCH] RFC: dtoc: add POC for dtb shrink Walter Lozano
[PATCH v2 00/14] improve OF_PLATDATA support Walter Lozano
[PATCH v2 01/14] drivers: rename drivers to match compatible string Walter Lozano
[PATCH v2 02/14] dtoc: add missing code comments Walter Lozano
[PATCH v2 03/14] dtoc: add support to scan drivers Walter Lozano
[PATCH v2 04/14] dtoc: add option to disable warnings Walter Lozano
[PATCH v2 05/14] dm: doc: update of-plat with the support for driver aliases Walter Lozano
[PATCH v2 06/14] core: drop const for struct driver_info Walter Lozano
[PATCH v2 07/14] core: extend struct driver_info to point to device Walter Lozano
[PATCH v2 08/14] dtoc: extend dtoc to use struct driver_info when linking nodes Walter Lozano
[PATCH v2 09/14] dm: doc: update of-plat with new phandle support Walter Lozano
[PATCH v2 10/14] dtoc: update tests to match new platdata Walter Lozano
[PATCH v2 11/14] sandbox: Move section u_boot_list to make it RW Walter Lozano
[PATCH v2 12/14] arm: dts: include gpio nodes for card detect Walter Lozano
[PATCH v2 13/14] dtoc: update dtb_platdata to support cd-gpios Walter Lozano
[PATCH v2 14/14] dtoc add test for cd-gpios Walter Lozano
[RFC 0/4] drivers: footprint reduction proposal Walter Lozano
[RFC 1/4] dtoc: add POC for dtb shrink Walter Lozano
[RFC 2/4] dtoc: add initial support for deleting DTB nodes Walter Lozano
[RFC 3/4] dtoc: add support for generate stuct udevice_id Walter Lozano
[RFC 4/4] mmc: fsl_esdhc_imx: make use of dtoc to generate struct udevice_id Walter Lozano
[PATCH] RFC: dtoc: add POC for dtb shrink Walter Lozano
[RFC 0/4] drivers: footprint reduction proposal Walter Lozano
[RFC 0/4] drivers: footprint reduction proposal Walter Lozano
[PATCH v2 00/14] improve OF_PLATDATA support Walter Lozano
[PATCH v2 08/14] dtoc: extend dtoc to use struct driver_info when linking nodes Walter Lozano
[PATCH v2 12/14] arm: dts: include gpio nodes for card detect Walter Lozano
[PATCH v2 03/14] dtoc: add support to scan drivers Walter Lozano
[PATCH v3 00/14] improve OF_PLATDATA support Walter Lozano
[PATCH v3 01/14] drivers: rename drivers to match compatible string Walter Lozano
[PATCH v3 02/14] dtoc: add missing code comments Walter Lozano
[PATCH v3 03/14] core: add support for U_BOOT_DRIVER_ALIAS Walter Lozano
[PATCH v3 04/14] dtoc: add support to scan drivers Walter Lozano
[PATCH v3 05/14] dtoc: add option to disable warnings Walter Lozano
[PATCH v3 06/14] dm: doc: update of-plat with the support for driver aliases Walter Lozano
[PATCH v3 07/14] core: drop const for struct driver_info Walter Lozano
[PATCH v3 08/14] core: extend struct driver_info to point to device Walter Lozano
[PATCH v3 09/14] sandbox: Move section u_boot_list to make it RW Walter Lozano
[PATCH v3 10/14] dtoc: extend dtoc to use struct driver_info when linking nodes Walter Lozano
[PATCH v3 11/14] dm: doc: update of-plat with new phandle support Walter Lozano
[PATCH v3 12/14] arm: dts: include gpio nodes for card detect Walter Lozano
[PATCH v3 13/14] dtoc: update dtb_platdata to support cd-gpios Walter Lozano
[PATCH v3 14/14] dtoc: add test for cd-gpios Walter Lozano
[PATCH v4 00/14] improve OF_PLATDATA support Walter Lozano
[PATCH v4 01/14] drivers: rename drivers to match compatible string Walter Lozano
[PATCH v4 02/14] dtoc: add missing code comments Walter Lozano
[PATCH v4 03/14] core: add support for U_BOOT_DRIVER_ALIAS Walter Lozano
[PATCH v4 04/14] dtoc: add support to scan drivers Walter Lozano
[PATCH v4 05/14] dtoc: add option to disable warnings Walter Lozano
[PATCH v4 06/14] dm: doc: update of-plat with the support for driver aliases Walter Lozano
[PATCH v4 07/14] core: drop const for struct driver_info Walter Lozano
[PATCH v4 08/14] core: extend struct driver_info to point to device Walter Lozano
[PATCH v4 09/14] sandbox: Move section u_boot_list to make it RW Walter Lozano
[PATCH v4 10/14] dtoc: extend dtoc to use struct driver_info when linking nodes Walter Lozano
[PATCH v4 11/14] dm: doc: update of-plat with new phandle support Walter Lozano
[PATCH v4 12/14] arm: dts: include gpio nodes for card detect Walter Lozano
[PATCH v4 13/14] dtoc: update dtb_platdata to support cd-gpios Walter Lozano
[PATCH v4 14/14] dtoc: add test for cd-gpios Walter Lozano
[PATCH v4 12/14] arm: dts: include gpio nodes for card detect Walter Lozano
[PATCH v4 02/14] dtoc: add missing code comments Walter Lozano
[RFC 0/4] drivers: footprint reduction proposal Walter Lozano
[PATCH v6 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor Walter Lozano
[PATCH] rockchip: rk3399: allow deselecting SPL_ATF_NO_PLATFORM_PARAM Walter Lozano
[PATCH 0/4] Move eSDHC adapter card code to board files Yangbo Lu
[PATCH 1/4] Drop global data sdhc_adapter for powerpc Yangbo Lu
[PATCH 2/4] Move eSDHC adapter card identification to board files Yangbo Lu
[PATCH 3/4] board: fsl: lx2160aqds: identify SDHC adapter during board init Yangbo Lu
[PATCH 4/4] configs: lx2160aqds: enable CONFIG_BOARD_EARLY_INIT_R Yangbo Lu
UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE Anastasiia Lukianenko
UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE Anastasiia Lukianenko
UCLASS_BLK driver binding without devtree and U_BOOT_DEVICE Anastasiia Lukianenko
Multi DTB selection in SPL FIT image Vanessa Ayumi Maegima
[PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Brandon Maier
Fwd: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Brandon Maier
Fwd: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Brandon Maier
[External] Re: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Brandon Maier
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Lukasz Majewski
[RESEND PATCH] usb: max3420: add the gadget driver Lukasz Majewski
[PATCH for v2020.10 1/1] cmd: drop fitupd command Lukasz Majewski
[PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name() Lukasz Majewski
[PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name() Lukasz Majewski
[U-boot,1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver Mark-MC.Lee
[U-boot,V2,0/2] Enable mt7531 switch support for MT7629 MarkLee
[U-boot, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver MarkLee
[U-boot, V2, 2/2] arm: dts: mediatek: enable sgmii mode and mt7531 switch for mt7629 MarkLee
[PATCH] image: Add support for ZSTD decompression Robert Marko
[PATCH v2] arm64: issue ISB after updating system registers Bertrand Marquis
[PATCH 1/1] virtio: VIRTIO_RNG depends on DM_RNG Bin Meng
[PATCH v2 1/4] x86: tangier: acpi: Create buffers outside of the methods Bin Meng
[PATCH v2 2/4] x86: tangier: acpi: Replace _ADR() by _UID() in description of PCI host bridge Bin Meng
[PATCH v2 3/4] x86: tangier: acpi: Drop _ADR() where _HID() is present Bin Meng
[PATCH v2 4/4] x86: tangier: acpi: Drop _HID() where enumerated by _ADR() Bin Meng
[PATCH 1/3] x86: baytrail: acpi: Create buffers outside of the methods Bin Meng
[PATCH 2/3] x86: baytrail: acpi: Replace _ADR() by _UID() in description of PCI host bridge Bin Meng
[PATCH 3/3] x86: quark: acpi: Replace _ADR() by _UID() in description of PCI host bridge Bin Meng
[PATCH v2 1/4] x86: tangier: acpi: Create buffers outside of the methods Bin Meng
[PATCH v2 2/4] x86: tangier: acpi: Replace _ADR() by _UID() in description of PCI host bridge Bin Meng
[PATCH v2 3/4] x86: tangier: acpi: Drop _ADR() where _HID() is present Bin Meng
[PATCH v2 4/4] x86: tangier: acpi: Drop _HID() where enumerated by _ADR() Bin Meng
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Bin Meng
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Bin Meng
[PATCH 1/2] riscv: sbi: Remove sbi_spec_version Bin Meng
[PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01 Bin Meng
[PATCH 1/3] x86: baytrail: acpi: Create buffers outside of the methods Bin Meng
[PATCH 2/3] x86: baytrail: acpi: Replace _ADR() by _UID() in description of PCI host bridge Bin Meng
[PATCH 3/3] x86: quark: acpi: Replace _ADR() by _UID() in description of PCI host bridge Bin Meng
Please pull u-boot-x86 Bin Meng
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Bin Meng
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Bin Meng
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Bin Meng
[PATCH 1/2] riscv: sbi: Remove sbi_spec_version Bin Meng
[PATCH] nvme: Invalidate dcache before submitting admin cmd Bin Meng
[PATCH 1/2] riscv: fu540: dts: Remove the unnecessary space in the cpu2_intc node Bin Meng
[PATCH 2/2] riscv: fu540: dts: Correct reg size of otp and dmc nodes Bin Meng
[PATCH] nvme: Invalidate dcache before submitting admin cmd Bin Meng
[PATCH] riscv: sbi: Add newline to error message Bin Meng
[PATCH v2 1/5] fdtdec: Fix the types of addr and size in fdtdec_add_reserved_memory() Bin Meng
[PATCH v2 2/5] fdtdec: Honor #address-cells and #size-cells in fdtdec_add_reserved_memory() Bin Meng
[PATCH v2 3/5] test/dm: fdtdec: Add the missing gd declaration Bin Meng
[PATCH v2 4/5] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout() Bin Meng
[PATCH v2 5/5] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory() Bin Meng
[PATCH v3 1/5] fdtdec: Fix the types of addr and size in fdtdec_add_reserved_memory() Bin Meng
[PATCH v3 2/5] fdtdec: Honor #address-cells and #size-cells in fdtdec_add_reserved_memory() Bin Meng
[PATCH v3 3/5] test/dm: fdtdec: Add the missing gd declaration Bin Meng
[PATCH v3 4/5] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout() Bin Meng
[PATCH v3 5/5] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory() Bin Meng
[PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node Bin Meng
[PATCH V2] nvme: Invalidate dcache before submitting admin cmd Bin Meng
[PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node Bin Meng
[PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size Bin Meng
[PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size Bin Meng
qemu-system-riscv32: warning: No -bios option specified Bin Meng
Please pull u-boot-dm/next Bin Meng
[PATCH v3 1/6] sifive: fu540: Add runtime boot mode detection Bin Meng
[PATCH v3 2/6] sifive: fu540: Add Booting from SPI Bin Meng
[PATCH v3 3/6] env: Enable SPI flash env for SiFive FU540 Bin Meng
[PATCH v3 4/6] sifive: fu540: Mark the default env as SPI flash Bin Meng
[PATCH v3 3/6] env: Enable SPI flash env for SiFive FU540 Bin Meng
[PATCH v3 5/6] sifive: fu540: Add boot flash script offset, size Bin Meng
Please pull u-boot-dm/next Bin Meng
[PATCH v3 6/6] sifive: fu540: Enable SF distro bootcmd Bin Meng
Please pull u-boot-dm/next Bin Meng
[PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property Bin Meng
[PATCH 2/5] sysreset: syscon: Support value property Bin Meng
[PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on Bin Meng
[PATCH 4/5] riscv: qemu: Add syscon reboot and poweroff support Bin Meng
[PATCH 5/5] riscv: sifive: fu540: Add gpio-restart support Bin Meng
[PATCH v4 1/3] test/dm: fdtdec: Add the missing gd declaration Bin Meng
[PATCH v4 2/3] test/dm: fdtdec: Corect a typo in dm_test_fdtdec_set_carveout() Bin Meng
[PATCH v4 3/3] test/dm: fdtdec: Add tests for fdtdec_add_reserved_memory() Bin Meng
[PATCH] cmd: bootefi: Fix fdt_size variable type in efi_carve_out_dt_rsv() Bin Meng
[PATCH 1/3] riscv: Do not return error if reserved node already exists Bin Meng
[PATCH 2/3] riscv: Use optimized version of fdtdec_get_addr_size_no_parent Bin Meng
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Bin Meng
[PATCH] doc: qemu-riscv: Update QEMU run command Bin Meng
[PATCH] travis-ci: Update QEMU RISC-V run command Bin Meng
[PATCH] travis-ci: Update QEMU RISC-V run command Bin Meng
[PATCH 1/3] riscv: Do not return error if reserved node already exists Bin Meng
[PATCH v4 0/4] update clock handler and proper cpu features Bin Meng
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Bin Meng
[PATCH v4 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases Bin Meng
[PATCH v4 3/4] riscv: cpu: fixes to display proper CPU features Bin Meng
[PATCH v4 4/4] riscv: cpu: check and append L1 cache to cpu features Bin Meng
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Bin Meng
[PATCH 1/5] dt-bindings: prci: add indexes for reset signals available in prci Bin Meng
[U-Boot] Pull request: u-boot-riscv/master Bin Meng
[PATCH 2/5] fu540: prci: use common reset indexes defined in binding header Bin Meng
[PATCH 2/5] fu540: prci: use common reset indexes defined in binding header Bin Meng
[PATCH 3/5] fu540: dtsi: add reset producer and consumer entries Bin Meng
[PATCH 3/5] fu540: dtsi: add reset producer and consumer entries Bin Meng
[PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's Bin Meng
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Bin Meng
[PATCH 4/5] sifive: reset: add DM based reset driver for SiFive SoC's Bin Meng
[PATCH 5/5] configs: reset: fu540: enable dm reset framework for SiFive SoC Bin Meng
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Bin Meng
[PATCH v4 0/4] update clock handler and proper cpu features Bin Meng
[PATCH v3 1/2] riscv: Do not return error if reserved node already exists Bin Meng
[PATCH v4 1/4] fu540: prci: add request and free clock handlers Bin Meng
[PATCH v3 1/3] riscv: Avoid the reserved memory fixup if src and dst point to the same place Bin Meng
[PATCH v3 2/3] riscv: Expand the DT size before copy reserved memory node Bin Meng
[PATCH v3 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE Bin Meng
Current Azure CI failures Bin Meng
[PATCH v4 1/3] riscv: Avoid the reserved memory fixup if src and dst point to the same place Bin Meng
[PATCH v4 2/3] riscv: Expand the DT size before copy reserved memory node Bin Meng
[PATCH v4 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE Bin Meng
[PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on Bin Meng
[PATCH 1/1] riscv: use log functions in fdt_fixup Bin Meng
[PATCH v5 3/3] riscv: cpu: check and append L1 cache to cpu features Bin Meng
[PATCH v6 2/4] uclass: cpu: fix to display proper CPU features Bin Meng
[PATCH v6 3/4] riscv: cpu: correctly handle the setting of CPU_FEAT_MMU bit Bin Meng
[PATCH] test/py: test_efi_fit: Update #size-cells to 1 Bin Meng
[PATCH] azure: gitlab: travis: Update OpenSBI used for RISC-V testing Bin Meng
[PATCH] x86: Don't build some unused objects in TPL Bin Meng
[PATCH] test/py: test_efi_fit: Update #size-cells to 1 Bin Meng
[PATCH v2] test/py: test_efi_fit: Update #size-cells to 1 Bin Meng
[PATCH v2 01/25] x86: mp_init: Switch to livetree Bin Meng
[PATCH v2 02/25] x86: Move MP code into mp_init Bin Meng
[PATCH v2 03/25] x86: mp_init: Avoid declarations in header files Bin Meng
[PATCH v2 04/25] x86: mp_init: Switch parameter names in start_aps() Bin Meng
[PATCH v2 05/25] x86: mp_init: Drop the num_cpus static variable Bin Meng
[PATCH v2 06/25] x86: mtrr: Fix 'ensable' typo Bin Meng
[PATCH v2 07/25] x86: mp_init: Set up the CPU numbers at the start Bin Meng
[PATCH v2 08/25] x86: mp_init: Adjust bsp_init() to return more information Bin Meng
[PATCH v2 09/25] x86: cpu: Remove unnecessary #ifdefs Bin Meng
[PATCH v2 10/25] x86: mp: Support APs waiting for instructions Bin Meng
[PATCH v2 11/25] global_data: Add a generic global_data flag for SMP state Bin Meng
[PATCH v2 12/25] x86: Set the SMP flag when MP init is complete Bin Meng
[PATCH v2 13/25] x86: mp: Allow running functions on multiple CPUs Bin Meng
[PATCH v2 14/25] x86: mp: Park CPUs before running the OS Bin Meng
[PATCH v2 15/25] x86: mp: Add iterators for CPUs Bin Meng
[PATCH v2 16/25] x86: mtrr: Use MP calls to list the MTRRs Bin Meng
[PATCH v2 17/25] x86: Don't enable SMP in SPL Bin Meng
[PATCH v2 18/25] x86: coral: Update the memory map Bin Meng
[PATCH v2 19/25] x86: mtrr: Update MTRRs on all CPUs Bin Meng
[PATCH v2 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU Bin Meng
[PATCH v2 21/25] x86: mtrr: Update the command to use the new mtrr calls Bin Meng
[PATCH v2 22/25] x86: mtrr: Restructure so command execution is in one place Bin Meng
[PATCH v2 23/25] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU Bin Meng
[PATCH v2 24/25] x86: mp: Add more comments to the module Bin Meng
[PATCH v3 03/35] acpi: Add a way to check device status Bin Meng
[PATCH v3 04/35] irq: Add a method to convert an interrupt to ACPI Bin Meng
[PATCH v3 05/35] acpi: Support generation of ACPI code Bin Meng
[PATCH v3 06/35] acpi: Support generation of interrupt descriptor Bin Meng
[PATCH v3 07/35] gpio: Add a method to convert a GPIO to ACPI Bin Meng
[PATCH v3 08/35] acpi: Support string output Bin Meng
[PATCH v3 09/35] acpi: Support generation of GPIO descriptor Bin Meng
[PATCH v3 10/35] acpi: Support generation of a GPIO/irq for a device Bin Meng
[PATCH v2] test/py: test_efi_fit: Update #size-cells to 1 Bin Meng
[PATCH v3 11/35] acpi: Support generation of I2C descriptor Bin Meng
[PATCH v3 12/35] acpi: Support generation of SPI descriptor Bin Meng
[PATCH v3 13/35] acpigen: Support writing a length Bin Meng
[PATCH v3 14/35] acpigen: Support writing a package Bin Meng
[PATCH v3 15/35] acpi: Support writing an integer Bin Meng
[PATCH v3 16/35] acpi: Support writing a string Bin Meng
[PATCH v3 17/35] acpi: Support writing a name Bin Meng
[PATCH v3 18/35] acpi: Support writing a UUID Bin Meng
[PATCH v3 19/35] acpi: Support writing Device Properties objects via _DSD Bin Meng
[PATCH v3 20/35] acpi: Support writing a GPIO Bin Meng
[PATCH v3 21/35] acpi: Support copying properties from device tree to ACPI Bin Meng
[PATCH v3 22/35] acpi: Add support for various misc ACPI opcodes Bin Meng
[PATCH v3 23/35] acpi: Add support for writing a Power Resource Bin Meng
[PATCH v3 24/35] acpi: Add support for writing a GPIO power sequence Bin Meng
[PATCH v3 26/35] acpi: Add support for SSDT generation Bin Meng
[PATCH v3 27/35] x86: acpi: Move MADT down a bit Bin Meng
[PATCH v3 28/35] acpi: Record the items added to SSDT Bin Meng
[PATCH v3 29/35] acpi: Support ordering SSDT data by device Bin Meng
[PATCH v3 30/35] x86: Allow devices to write an SSDT Bin Meng
[PATCH v3 31/35] acpi: Add support for DSDT generation Bin Meng
[PATCH v3 32/35] x86: Allow devices to write to DSDT Bin Meng
[PATCH v3 33/35] pci: Avoid a crash in device_is_on_pci_bus() Bin Meng
[PATCH v3 34/35] dm: acpi: Enhance acpi_get_name() Bin Meng
[PATCH v3 35/35] acpi: Add an acpi command to list/dump generated ACPI items Bin Meng
[PATCH v2 01/49] dm: core Fix long line in device_bind_common() Bin Meng
[PATCH v2 02/49] .gitignore: Ignore Python 3 cache directories Bin Meng
[PATCH v2 03/49] binman: Output errors to stderr Bin Meng
[PATCH v2 04/49] binman: cbfs: Fix IFWI typo Bin Meng
[PATCH v2 05/49] binman: Correct the search patch for pylibfdt Bin Meng
[PATCH v2 08/49] binman: Fix a few typos in the entry docs Bin Meng
[PATCH v2 09/49] binman: Adjust pylibfdt for incremental build Bin Meng
[PATCH v2 11/49] binman: Use super() instead of specifying parent type Bin Meng
[PATCH v2 12/49] binman: Add an etype for external binary blobs Bin Meng
[PATCH v2 13/49] binman: Convert existing binary blobs to blob_ext Bin Meng
[PATCH v2 14/49] binman: Allow external binaries to be missing Bin Meng
[PATCH v2 15/49] patman: Update errors and warnings to use stderr Bin Meng
[PATCH v2 16/49] binman: Detect when valid images are not produced Bin Meng
[PATCH v2 17/49] binman: Allow missing Intel blobs Bin Meng
[PATCH v2 18/49] binman: Allow zero-length entries to overlap Bin Meng
[PATCH v2 19/49] mkimage: Allow updating the FIT timestamp Bin Meng
[PATCH v2 22/49] x86: rockchip: Change how selection of ROMs works Bin Meng
[PATCH v2 24/49] Makefile: Allow building .rom files for non-x86 boards Bin Meng
[PATCH v2 31/49] Makefile: Rename ALL-y to INPUTS-y Bin Meng
[PATCH v2 32/49] powerpc: mpc85xx: Only enable binman when it is needed Bin Meng
[PATCH v2 33/49] x86: Makefile: Drop explicit targets built by binman Bin Meng
[PATCH v2 34/49] x86: Drop CONFIG_BUILD_ROM and repurpose BUILD_ROM Bin Meng
[PATCH v2 35/49] sunxi: Makefile: Drop explicit targets built by binman Bin Meng
[PATCH v2 36/49] tegra: Makefile: Drop explicit targets built by binman Bin Meng
[PATCH v2 37/49] mediatek: Makefile: Drop explicit targets built by binman Bin Meng
[PATCH v2 38/49] rockchip: Makefile: Drop explicit targets built by binman Bin Meng
[PATCH v2 39/49] Makefile: Move CONFIG_TOOLS_DEBUG check to later Bin Meng
[PATCH v2 40/49] Makefile: Fix a long line in cmd_mkfitimage Bin Meng
[PATCH v2 42/49] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR Bin Meng
[PATCH v2 44/49] rockchip: Convert evb-rk3229 over to use binman Bin Meng
[PATCH v2 45/49] rockchip: Drop the fit_spl_optee.sh script Bin Meng
[PATCH v2 46/49] x86: Move the fdtmap away from the binary blobs Bin Meng
[PATCH v2 47/49] x86: chromebook_link64: Correct the image layout Bin Meng
[PATCH v2 48/49] x86: chromebook_panther: Correct the image layout Bin Meng
[PATCH v2 49/49] x86: chromebook_samus_tpl: Correct the image layout Bin Meng
[PATCH v1 02/43] binman: Refactor binman_entry_find() to allow other nodes Bin Meng
[PATCH v1 04/43] acpi: Allow creating the GNVS to fail Bin Meng
[PATCH v1 06/43] dm: core: Add a way of overriding the ACPI device path Bin Meng
[PATCH v1 07/43] dm: acpi: Add support for the NHLT table Bin Meng
[PATCH v1 08/43] acpi: Export functions to write sized values Bin Meng
[PATCH v1 10/43] acpi: Support generation of a generic register Bin Meng
[PATCH v1 11/43] acpi: mmc: Generate ACPI info for the PCI SD Card Bin Meng
[PATCH v1 12/43] x86: Add bindings for NHLT Bin Meng
[PATCH v1 13/43] acpi: Support generation of a device Bin Meng
[PATCH v1 14/43] acpi: Support writing named values Bin Meng
[PATCH v1 15/43] sound: Add an ACPI driver for Dialog Semicondutor da7219 Bin Meng
[PATCH v1 17/43] x86: pinctrl: Add a way to get the pinctrl reg address Bin Meng
[PATCH v1 18/43] x86: pinctrl: Update comment for intel_pinctrl_get_pad() Bin Meng
[PATCH v1 19/43] x86: pinctrl: Add multi-ACPI control Bin Meng
[PATCH v1 20/43] x86: pinctrl: Set up itss in the probe() method Bin Meng
[PATCH v1 23/43] x86: Add error checking for csrt table generation Bin Meng
[PATCH v1 24/43] x86: apl: Use memory-mapped access for VBT Bin Meng
[PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO Bin Meng
[PATCH v1 26/43] i2c: designware_i2c: Add a little more debugging Bin Meng
[PATCH v1 27/43] i2c: Add log_ret() on error Bin Meng
[PATCH v1 29/43] p2sb: Add a method to hide the bus Bin Meng
[PATCH v1 30/43] x86: apl: Support set_hide() in p2sb driver Bin Meng
[PATCH v1 31/43] x86: apl: Hide the p2sb on exit from U-Boot Bin Meng
[PATCH v1 32/43] pmc: Move common registers to the header file Bin Meng
[PATCH v1 33/43] x86: irq: Support flags for acpi_gpe Bin Meng
[PATCH v1 34/43] x86: apl: Fix save/restore of ITSS priorities Bin Meng
[PATCH v1 35/43] x86: Add debugging to table writing Bin Meng
[PATCH v1 37/43] x86: Store the coreboot table address in global_data Bin Meng
[PATCH v1 38/43] x86: mp: Allow use of mp_run_on_cpus() without MP Bin Meng
[PATCH v1 39/43] x86: Update the comment about booting for FSP2 Bin Meng
[PATCH v1 40/43] x86: Drop setup_pcat_compatibility() Bin Meng
[PATCH v1 41/43] x86: acpi: Correct the version of the MADT Bin Meng
[PATCH v1 42/43] x86: Rename board_final_cleanup() to board_final_init() Bin Meng
[PATCH v1 43/43] acpi: Enable ACPI table generation by default on x86 Bin Meng
[PATCH v2 1/1] riscv: use log functions in fdt_fixup Bin Meng
[PATCH v2 12/23] logicpd: Drop omap3 zoom1 Nishanth Menon
[PATCH] rockchip: rockpro64: Set cooling levels for pwm-fan Kurt Miller
[PATCH] rockchip: Add delay after link-training Kurt Miller
[PATCH] rockchip: Add delay after link-training Kurt Miller
[PATCH] rockchip: Add delay after link-training Kurt Miller
[PATCH] rockchip: Add delay after link-training Kurt Miller
[PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions Soeren Moch
[PATCHv5][ 7/7] board: tbs2910: add documentation Soeren Moch
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Soeren Moch
U-Boot atheros PHY support and cubox ethernet Soeren Moch
U-Boot atheros PHY support and cubox ethernet Soeren Moch
U-Boot atheros PHY support and cubox ethernet Soeren Moch
U-Boot atheros PHY support and cubox ethernet Soeren Moch
[PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression Soeren Moch
U-Boot atheros PHY support and cubox ethernet Sören Moch
[PATCH] Correct sun8i-v3s SRAM size Benedikt-Alexander Mokroß
[PATCH 2/2] sun8i-emac: Added sun8i-v3s-emac example to sun8i-v3s.dtsi Benedikt-Alexander Mokroß
[PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic Anand Moon
[PATCH] board: amlogic: Add Odroid-N2 board support Anand Moon
[PATCH] board: amlogic: Add Odroid-N2 board support Anand Moon
[PATCH 0/2] u-boot support for ODROID-C4 Anand Moon
[PATCH 0/2] u-boot support for ODROID-C4 Anand Moon
[PATCH v4 0/5] TI Ethernet PHY changes Dan Murphy
[PATCH v2] mmc: sdhci: Fix HISPD bit handling Robin Murphy
[PATCH] [RFC] tools: fitmount: fuse mount fit images Selva Muthukumar
[PATCH] [RFC] tools: fitmount: fuse mount fit images Selva Muthukumar
USB patch for rpi4 Sylwester Nawrocki
[PATCH 2/8] mx6memcal: Finish migration to defconfig options Eric Nelson
[PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support Alex Nemirovsky
[PATCH v9 2/2] board: presidio-asic: Add I2C support Alex Nemirovsky
[PATCH v8 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller Alex Nemirovsky
[PATCH v8 2/2] board: presidio-asic: Add SPI NOR support Alex Nemirovsky
[PATCH v9 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller Alex Nemirovsky
[PATCH v9 2/2] board: presidio-asic: Add SPI NOR support Alex Nemirovsky
[PATCH v2 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Alex Nemirovsky
[PATCH v2 2/2] board: presidio-asic: Add RAW Parallel NAND support Alex Nemirovsky
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Alex Nemirovsky
[PATCH v3 2/2] board: presidio-asic: Add RAW Parallel NAND support Alex Nemirovsky
[PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v1 2/2] board: presidio-asic: Add CAxxxx Ethernet support Alex Nemirovsky
[PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Alex Nemirovsky
[PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Alex Nemirovsky
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Alex Nemirovsky
[PATCH v2 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v2 2/2] board: presidio-asic: Add CAxxxx Ethernet support Alex Nemirovsky
[PATCH v3 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v3 2/2] board: presidio-asic: Add CAxxxx Ethernet support Alex Nemirovsky
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v4 2/2] board: presidio-asic: Add CAxxxx Ethernet support Alex Nemirovsky
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Alex Nemirovsky
[PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support Alex Nemirovsky
[PATCH v9 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller Alex Nemirovsky
[PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver Alex Nemirovsky
[PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver Alex Nemirovsky
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Dinh Nguyen
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Dinh Nguyen
Usb on imx8mm Joris OFFOUGA
U-Boot mainline: Digilent Zybo-Z7 support Milan Obuch
Usb on imx8mm Joris Offouga
[PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Vladimir Oltean
[PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Vladimir Oltean
[PATCHv3 08/15] dts: powerpc: p1020rdb: Add eTSEC DT nodes Vladimir Oltean
[PATCHv3 15/15] configs: P2020RDB: Enable DM_ETH config Vladimir Oltean
[PATCHv3 13/15] configs: P1010RDB: Enable DM_ETH config Vladimir Oltean
[PATCHv3 12/15] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH Vladimir Oltean
[PATCHv3 01/15] net: fsl_mdio: Change to use virtual address Vladimir Oltean
[PATCHv3 03/15] net: tsec: convert to use DM_MDIO when DM_ETH enabled Vladimir Oltean
[PATCHv3 06/15] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r() Vladimir Oltean
[PATCHv3 04/15] net: tsec: Add the compatible string "gianfar" support Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
U-Boot atheros PHY support and cubox ethernet Vladimir Oltean
mx6sabresd: Trying to use qca,clk-out-frequency Vladimir Oltean
mx6sabresd: Trying to use qca,clk-out-frequency Vladimir Oltean
mx6sabresd: Trying to use qca,clk-out-frequency Vladimir Oltean
[PATCH 4/4] mx6cuboxi: Convert to DM_ETH Vladimir Oltean
[PATCH 22/30] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig Igor Opaniuk
[PATCH v1 00/13] This patch-series includes updates for Toradex modules: Igor Opaniuk
[PATCH v1 01/13] apalis-imx8: enable of_system_setup Igor Opaniuk
[PATCH v1 02/13] apalis/colibri-imx8: re-enable CONFIG_IMX_SCU_THERMAL Igor Opaniuk
[PATCH v1 03/13] colibri-imx8x: declare consoleargs Igor Opaniuk
[PATCH v1 04/13] colibri_imx7: add addresses required for distro boot Igor Opaniuk
[PATCH v1 05/13] colibri-imx6ull/imx7: define bootubipart for distro boot Igor Opaniuk
[PATCH v1 06/13] colibri_vf_defconfig: enable part cmd Igor Opaniuk
[PATCH v1 07/13] configs/colibri_vf.h: drop sdboot in favour of distro_bootcmd Igor Opaniuk
[PATCH v1 08/13] apalis-tk1: enable distroboot Igor Opaniuk
[PATCH v1 09/13] apalis-tk1: fix setting fdtfile value Igor Opaniuk
[PATCH v1 10/13] toradex: imx: enable BOOTCOUNT feature Igor Opaniuk
[PATCH v1 11/13] apalis_imx6: boot env configuration updates Igor Opaniuk
[PATCH v1 12/13] colibri_imx7: boot env configuration updates Igor Opaniuk
[PATCH v1 13/13] colibri_imx6: boot env configuration updates Igor Opaniuk
[PATCHv2 22/31] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig Igor Opaniuk
[PATCH v1] imx: mx7: fix DDRC size in A7-M4 mapping table Igor Opaniuk
[PATCH v1 0/7] Toradex: EEPROM storage support for Config Block Igor Opaniuk
[PATCH v1 1/7] toradex: tdx-cfg-block: add EEPROM read/store wrappers Igor Opaniuk
[PATCH v1 2/7] toradex: tdx-cfg-block: add carrier boards and display adapters Igor Opaniuk
[PATCH v1 3/7] toradex: tdx-cfg-block: add support for EEPROM Igor Opaniuk
[PATCH v1 4/7] toradex: tdx-cfg-clock: add migration routine from PID8 Igor Opaniuk
[PATCH v1 5/7] toradex: tdx-cfg-block: add carrier board info printing Igor Opaniuk
[PATCH v1 6/7] ARM: dts: imx8mm-verdin: eeprom nodes adjustments Igor Opaniuk
[PATCH v1 7/7] verdin-imx8mm: add EEPROM support for carrier board Igor Opaniuk
[PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer Igor Opaniuk
[PATCH v1 1/6] ARM: dts: imx6ull-colibri: move u-boot specific node Igor Opaniuk
[PATCH v1 2/6] toradex: common: show boot logo Igor Opaniuk
[PATCH v1 3/6] ARM: dts: imx7-colibri: multiple node updates Igor Opaniuk
[PATCH v1 4/6] colibri-imx6ull: show boot logo Igor Opaniuk
[PATCH v1 5/6] colibri-imx6ull: fix splash screen logo drawing Igor Opaniuk
[PATCH v1 6/6] colibri-imx7: fix splash logo drawing Igor Opaniuk
[PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection Chris Packham
[PATCH v3 0/4] spi: kirkwood: dm-conversion (part4) Chris Packham
[PATCH 0/2] arm: mvebu: a38x: USB2 serdes changes Chris Packham
[PATCH 1/2] arm: mvebu: a38x: Fix typo Chris Packham
[PATCH 2/2] arm: mvebu: a38x: Adjust UTMI PHY parameters Chris Packham
[PATCH v3 0/4] spi: kirkwood: dm-conversion (part4) Chris Packham
Mainlining advice for new (MStar/SigmaStar) ARMv7 SoC family Daniel Palmer
Mainlining advice for new (MStar/SigmaStar) ARMv7 SoC family Daniel Palmer
[PATCH 1/3] pinctrl: bcm283x: DM_FLAG_PRE_RELOC: Remove OF_CONTROL check Ovidiu Panait
[PATCH 2/3] pinctrl: bcm283x: Read address from DT in ofdata_to_platdata Ovidiu Panait
[PATCH 3/3] pinctrl: bcm283x: Store the return value of dev_read_u32_default to int Ovidiu Panait
[PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value Ovidiu Panait
[PATCH 1/2] riscv: fu540: dts: Remove the unnecessary space in the cpu2_intc node Pragnesh Patel
[PATCH 2/2] riscv: fu540: dts: Correct reg size of otp and dmc nodes Pragnesh Patel
[PATCH] mtd: spi-nor: Enable QE bit for ISSI flash in case of SFDP Pragnesh Patel
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Pragnesh Patel
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Pragnesh Patel
[PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver Pragnesh Patel
[PATCH 1/5] sysreset: syscon: Don't assume default value for offset and mask property Pragnesh Patel
[PATCH 2/5] sysreset: syscon: Support value property Pragnesh Patel
[PATCH 3/5] riscv: Do not build reset.c if SYSRESET is on Pragnesh Patel
[PATCH 4/5] riscv: qemu: Add syscon reboot and poweroff support Pragnesh Patel
[PATCH 5/5] riscv: sifive: fu540: Add gpio-restart support Pragnesh Patel
[PATCH 0/6] mmc_spi: mmc erase resolve Pragnesh Patel
[PATCH 1/6] mmc: mmc_spi: correct the while condition Pragnesh Patel
[PATCH 2/6] mmc: mmc_spi: generate R1 response for different mmc SPI commands Pragnesh Patel
[PATCH 3/6] mmc: read ssr for SD spi Pragnesh Patel
[PATCH 4/6] mmc: mmc_spi: Read R2 response for send status command - CMD13 Pragnesh Patel
[PATCH 5/6] mmc: mmc_spi: Generate R1 response for erase block start and end address Pragnesh Patel
[PATCH 6/6] mmc_spi: generate R1b response for erase and stop transmission command Pragnesh Patel
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Atish Patra
[PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node Atish Patra
[PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default Atish Patra
[PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01 Atish Patra
[PATCH] riscv: sbi: Add newline to error message Atish Patra
[PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node Atish Patra
[PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size Atish Patra
[PATCH 2/2] riscv: Do not return error if reserved node already exists Atish Patra
[PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size Atish Patra
[PATCH 1/2] riscv: Use correct version of fdtdec_get_addr_size Atish Patra
[PATCH 0/3] Assorted fixes related to reserved memory Atish Patra
[PATCH 1/3] riscv: Do not return error if reserved node already exists Atish Patra
[PATCH 2/3] riscv: Use optimized version of fdtdec_get_addr_size_no_parent Atish Patra
[PATCH 3/3] cmd: bootefi: Honor the address & size cells properties correctly Atish Patra
[PATCH 3/3] cmd: bootefi: Honor the address & size cells properties correctly Atish Patra
[PATCH] doc: qemu-riscv: Update QEMU run command Atish Patra
[PATCH 1/3] riscv: Do not return error if reserved node already exists Atish Patra
[PATCH 1/3] riscv: Do not return error if reserved node already exists Atish Patra
[PATCH v3 0/2] Assorted fixes related to reserved memory Atish Patra
[PATCH v3 1/2] riscv: Do not return error if reserved node already exists Atish Patra
[PATCH v3 2/2] riscv: Use optimized version of fdtdec_get_addr_size_no_parent Atish Patra
[PATCH v3 1/3] riscv: Avoid the reserved memory fixup if src and dst point to the same place Atish Patra
[PATCH v3 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE Atish Patra
[PATCH v3 2/3] riscv: Expand the DT size before copy reserved memory node Atish Patra
[PATCH v2 1/1] riscv: use log functions in fdt_fixup Atish Patra
[PATCH] tpm: add TPM2_GetRandom command support Dhananjay Phadke
[PATCH 0/7] arm: Juno board updates and PCIe/SATA enablement Andre Przywara
[PATCH 1/7] arm: vexpress64: Fix counter frequency Andre Przywara
[PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address Andre Przywara
[PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address Andre Przywara
[PATCH 4/7] arm: juno: Enable DM_ETH Andre Przywara
[PATCH 5/7] sata_sil: Enable DM_PCI operation Andre Przywara
[PATCH 6/7] arm: juno: Enable PCI Andre Przywara
[PATCH 7/7] arm: juno: Enable SATA controller Andre Przywara
[PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties André Przywara
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS André Przywara
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS André Przywara
[PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN André Przywara
[PATCH] nvme: Invalidate dcache before submitting admin cmd André Przywara
[PATCH] nvme: Invalidate dcache before submitting admin cmd André Przywara
[RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40 André Przywara
[linux-sunxi] Re: [RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40 André Przywara
[PATCH v2] arm64: issue ISB after updating system registers André Przywara
[u-boot PATCH] phy: omap-usb2-phy: disable phy charger detect Roger Quadros
[PATCH 0/2] omap4: panda: convert to device model Vignesh Raghavendra
[PATCH 0/3] AM654/J721e: Sync UDMA bindings Vignesh Raghavendra
[PATCH 1/3] dma: ti: Add static PSIL endpoint information Vignesh Raghavendra
[PATCH 2/3] dma: ti: k3-udma: Update driver to use static endpoint Data Vignesh Raghavendra
[PATCH 3/3] arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT Vignesh Raghavendra
[PATCH v2 0/3] Sync UDMA bindings from kernel Vignesh Raghavendra
[PATCH v2 1/3] dma: ti: Add static PSIL endpoint information Vignesh Raghavendra
[PATCH v2 2/3] dma: ti: k3-udma: Update driver to use static endpoint Data Vignesh Raghavendra
[PATCH v2 3/3] arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT Vignesh Raghavendra
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Miquel Raynal
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Miquel Raynal
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Miquel Raynal
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Miquel Raynal
How to fix: partition (SPL) size alignment incorrect Miquel Raynal
[PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board Tom Rini
Thoughts on code line length Tom Rini
Pull request: u-boot-rockchip-20200531 Tom Rini
[GIT PULL] rpi: second round for v2020.07 Tom Rini
[PULL] Pull request: u-boot-stm32 for v2020.07: u-boot-stm32-20200528 Tom Rini
[PATCH] env: Add option to only ever append environment Tom Rini
[PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs Tom Rini
Please pull u-boot-x86 Tom Rini
[PATCH v3 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support Tom Rini
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Tom Rini
[PATCH v4 2/5] arm: provide a function for boards init code to modify MMU virtual-physical map Tom Rini
[PATCH v4 1/5] powerpc: move ADDR_MAP to Kconfig Tom Rini
[PATCH] env: Add option to only ever append environment Tom Rini
[PATCH] env: Add option to only ever append environment Tom Rini
[ANN] U-Boot v2020.07-rc3 released Tom Rini
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS Tom Rini
[PATCH] env: Add option to only ever append environment Tom Rini
[PATCH] env: Add option to only ever append environment Tom Rini
[PATCH]: cmd: part: add part block command Tom Rini
[PATCH] cmd: part: Add 'block' sub-command Tom Rini
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Tom Rini
[PATCH]: cmd: part: add part block command Tom Rini
[PATCH]: cmd: part: add part block command Tom Rini
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Tom Rini
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS Tom Rini
[PATCH 1/1] config: remove CONFIG_ARMV8_SWITCH_TO_EL1 from whitelist.txt Tom Rini
[PATCH] serial: Convert ARM_DCC to Kconfig Tom Rini
[PATCH] env: Add option to only ever append environment Tom Rini
[PATCH v1 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs Tom Rini
[PATCH v5 2/6] arm: update comments to the common style Tom Rini
[PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map Tom Rini
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Tom Rini
[PATCH] ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCI Tom Rini
[PATCH] bootcount_ext: Add Ext4 build dependency Tom Rini
[PATCH] cmd: fitupd: move config check to Kconfig Tom Rini
[PATCH 1/3] kconfig: mark SPL/TPL options for DM_KEYBOARD Tom Rini
[PATCH 2/3] kconfig: fix some typos Tom Rini
[PATCH 3/3] kconfig: fix typo for OHCI host and add to DM list Tom Rini
[PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
[PATCHv2 2/8] imx: Remove ARCH= references from documentation Tom Rini
[PATCHv2 3/8] powerpc: Remove ARCH= references from documentation Tom Rini
[PATCHv2 4/8] rockchip: Remove ARCH= references from documentation Tom Rini
[PATCHv2 5/8] arm: ti: Remove ARCH= references from documentation Tom Rini
[PATCHv2 6/8] m68k: Remove ARCH= references from documentation Tom Rini
[PATCHv2 7/8] fu540: Remove ARCH= references from documentation Tom Rini
[PATCHv2 8/8] cubieboard7: Remove ARCH= references from documentation Tom Rini
[v2] Azure: Add 'tools-only' build for macOS X hosts Tom Rini
[PATCH] mkimage: Default to adding a crc32 hash with '-f auto' Tom Rini
[PATCH] tools: fw_env: Fix warning when reading too little Tom Rini
[PATCH] image: android: fix abootimg support Tom Rini
[PATCH 1/2] usb: ohci: Add header file for ARCH_DMA_MINALIGN Tom Rini
[PATCH 2/2] dma-mapping: Add header file for ARCH_DMA_MINALIGN Tom Rini
[PATCH 1/1] test/py: use actual core count for parallel builds Tom Rini
Pull request: u-boot-sunxi/master Tom Rini
Pull request: u-boot-spi/master Tom Rini
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Tom Rini
[PATCH v4 1/2] net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs Tom Rini
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Tom Rini
Pull request for UEFI sub-system for efi-2020-07-rc4 Tom Rini
[PULL] u-boot-atmel-fixes-2020.07-a Tom Rini
[PULL] u-boot-atmel-fixes-2020.07-a Tom Rini
[U-Boot] Pull request: u-boot-riscv/master Tom Rini
[PATCH] board: ti: common: Fix pointer-bool-conversion warnings Tom Rini
[PATCH] board: ti: am335x_evm: Remove duplicate setting of bd_ram_ofs member Tom Rini
[PATCH] gpio: omap_gpio: Fix unused function warning in non-DM case Tom Rini
[PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg() Tom Rini
[PATCH] net: cpsw: Add __maybe_unused to generated inlines Tom Rini
[PATCH] usb: gadget: ether: Fix warnings about unused code Tom Rini
[PATCH] usb: musb-new: Fix unused function warnings from clang Tom Rini
[PATCH] usb: eth: lan78xx: Fix logic in lan78xx_read_otp() to avoid a warning Tom Rini
[PATCH 1/6] checkpatch.pl: Update to v5.7-rc6 Tom Rini
[PATCH 2/6] checkpatch.pl: Add a U-Boot option Tom Rini
[PATCH 3/6] checkpatch.pl: Add a check for tests needed for uclasses Tom Rini
[PATCH 4/6] checkpatch.pl: Warn if the flattree API is used Tom Rini
[PATCH 5/6] checkpatch.pl: Request a test when a new command is added Tom Rini
[PATCH 6/6] checkpatch.pl: Request if() instead #ifdef Tom Rini
[PATCHv2] checkpatch.pl: Add check for defining CONFIG_CMD_xxx via config files Tom Rini
[PATCH 1/8] pfla02: Rework excluding NAND from SPL Tom Rini
[PATCH 2/8] mx6memcal: Finish migration to defconfig options Tom Rini
[PATCH 3/8] bcmstb: Migrate CONFIG_CMD_EXT[24] Tom Rini
[PATCH 4/8] ARM: rmobile: blanche: Disable CONFIG_CMD_SF / CONFIG_CMD_SPI Tom Rini
[PATCH 5/8] topic_miami: Disable GPIO Tom Rini
[PATCH 6/8] Convert CONFIG_BZIP2 et al to Kconfig Tom Rini
[PATCH 7/8] Convert CONFIG_CMD_ASKENV et al to Kconfig Tom Rini
[PATCH 8/8] Convert CONFIG_BOARD_LATE_INIT to Kconfig Tom Rini
[PATCH] serial: Add missing Kconfig dependencies for debug consoles Tom Rini
[PATCH] serial: Convert ARM_DCC to Kconfig Tom Rini
[PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg() Tom Rini
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Tom Rini
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Tom Rini
[PATCH] Add support for SHA384 and SHA512 Tom Rini
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Tom Rini
[PATCH 1/1] Dockerfile: add libguestfs-tools package Tom Rini
[PATCH] RFC: tiny-dm: Proposal for using driver model in SPL Tom Rini
[PATCH]: cmd: part: add part block command Tom Rini
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc Tom Rini
[tools] FIT tools rework Tom Rini
[PATCH 1/6] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set Tom Rini
[PATCH 2/6] env: Add H_DEFAULT flag Tom Rini
[PATCH 3/6] env: Fix invalid env handling in env_init() Tom Rini
[PATCH 4/6] env: nowhere: Implement .load callback Tom Rini
[PATCH 5/6] env: Add option to only ever append environment Tom Rini
[PATCH 6/6] env: Add support for explicit write access list Tom Rini
[PATCH v3] spl: allow board_spl_fit_post_load() to fail Tom Rini
[PATCH 3/6] env: Fix invalid env handling in env_init() Tom Rini
[PATCH 3/6] env: Fix invalid env handling in env_init() Tom Rini
Pull request for UEFI sub-system for efi-2020-07-rc4 (2) Tom Rini
[PATCH 3/5] arm: qemu: implement enable_caches() Tom Rini
Pull request: u-boot-rockchip-20200607 Tom Rini
pull request of u-boot-mpc85xx for v2020.07 Tom Rini
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Tom Rini
[PATCH 3/6] env: Fix invalid env handling in env_init() Tom Rini
[ANN] U-Boot v2020.07-rc4 released Tom Rini
[PATCH] cmd: Correct the 'md.q' command Tom Rini
[PATCH] Convert CONFIG_MXC_UART to Kconfig Tom Rini
[GIT PULL] Pull request: u-boot-imx u-boot-imx-20200609 Tom Rini
[PATCH 3/6] env: Fix invalid env handling in env_init() Tom Rini
[PATCH] tpm2: tis_spi: add linux compatible fallback string Tom Rini
[PATCH 1/1] Dockerfile: add libguestfs-tools package Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[PATCH] env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR Tom Rini
Update of dts files for U-Boot for i.MX Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[PATCH 00/30] Finish some Kconfig migrations Tom Rini
[PATCH 01/30] Convert CONFIG_AM335X_LCD to Kconfig Tom Rini
[PATCH 02/30] Convert CONFIG_ARCH_MISC_INIT to Kconfig Tom Rini
[PATCH 03/30] Convert CONFIG_ARM_PL180_MMCI to Kconfig Tom Rini
[PATCH 04/30] Convert CONFIG_ARMV7_PSCI et al to Kconfig Tom Rini
[PATCH 05/30] Convert CONFIG_AT91_GPIO to Kconfig Tom Rini
[PATCH 06/30] Convert CONFIG_ATMEL_HLCD to Kconfig Tom Rini
[PATCH 07/30] Convert CONFIG_ATMEL_NAND_HW_PMECC et al to Kconfig Tom Rini
[PATCH 08/30] Convert CONFIG_ATMEL_USART to Kconfig Tom Rini
[PATCH 09/30] bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to Kconfig Tom Rini
[PATCH 10/30] Convert CONFIG_BAUDRATE to Kconfig Tom Rini
[PATCH 11/30] Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig Tom Rini
[PATCH 12/30] Convert CONFIG_BOOTARGS to Kconfig Tom Rini
[PATCH 13/30] Convert CONFIG_BCH to Kconfig Tom Rini
[PATCH 14/30] Convert CONFIG_BOARD_TYPES to Kconfig Tom Rini
[PATCH 15/30] arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to Kconfig Tom Rini
[PATCH 16/30] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig Tom Rini
[PATCH 17/30] Convert CONFIG_BOOTP_DNS2 to Kconfig Tom Rini
[PATCH 18/30] Convert CONFIG_BOUNCE_BUFFER to Kconfig Tom Rini
[PATCH 19/30] Convert CONFIG_BUILD_TARGET to Kconfig Tom Rini
[PATCH 20/30] Convert CONFIG_CMDLINE_EDITING to Kconfig Tom Rini
[PATCH 21/30] Convert CONFIG_CONS_INDEX to Kconfig Tom Rini
[PATCH 22/30] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig Tom Rini
[PATCH 23/30] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig Tom Rini
[PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Tom Rini
[PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Tom Rini
[PATCH 26/30] Convert CONFIG_BOOTM_NETBSD to Kconfig Tom Rini
[PATCH 27/30] Kconfig: Remove CONFIG_CLOCKS_IN_MHZ Tom Rini
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Tom Rini
[PATCH 29/30] spi: Update build guard for DM objects to cover SPL/TPL Tom Rini
[PATCH 30/30] Convert CONFIG_CADENCE_QSPI to Kconfig Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Tom Rini
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Tom Rini
[EXT] [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Tom Rini
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Tom Rini
Update of dts files for U-Boot for i.MX Tom Rini
[ANN] U-Boot v2020.07-rc4 released Tom Rini
[PATCH] image: Add support for ZSTD decompression Tom Rini
[PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Tom Rini
[PATCH 25/30] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Tom Rini
[EXT] [PATCH 24/30] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Tom Rini
[RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32 Tom Rini
[PATCH] net: eth-uclass: Fix message if mac is coming from DT or ROM Tom Rini
[PATCH 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay Tom Rini
Gitlab failure Tom Rini
[PATCH v2] tpm2: tis_spi: add linux compatible fallback string Tom Rini
[PATCH] Add support for SHA384 and SHA512 Tom Rini
[PATCH] net: ping: reset stored IP once the command finishes Tom Rini
Gitlab failure Tom Rini
U-Boot call on Monday? Tom Rini
[PATCH v4 0/2] Calculate SDRAM size for Actions OWL SoCs Tom Rini
[PATCH] net: Fix error if some network features are disabled Tom Rini
[PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example Tom Rini
[PATCH] net: phy: micrel: ksz8061 implement errata 80000688A fix Tom Rini
[PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot Tom Rini
[PATCH] net: phy: add phyid search in vendor specific space Tom Rini
[PATCH v4 1/5] net: phy: Add missing kernel doc to phy functions Tom Rini
[PATCH v4 2/5] net: phy: Fix kernel doc issues in phy.h Tom Rini
[PATCH v4 3/5] net: phy: Add helper routines to set and clear bits Tom Rini
[PATCH v4 4/5] net: phy: Add support for TI PHY init Tom Rini
[PATCH v4 5/5] net: phy: Add DP8382x phy registration to TI PHY init Tom Rini
[PATCH] net: tftp: fix progress marker for file transfer Tom Rini
[PATCH 01/10] net: rtl8139: Factor out device name assignment Tom Rini
[PATCH 02/10] net: rtl8139: Switch from malloc()+memset() to calloc() Tom Rini
[PATCH 03/10] net: rtl8139: Use dev->iobase instead of custom ioaddr Tom Rini
[PATCH 04/10] net: rtl8139: Clean up bus_to_phys()/phys_to_bus() macros Tom Rini
[PATCH 05/10] net: rtl8139: Introduce device private data Tom Rini
[PATCH 06/10] net: rtl8139: Pass private data into rtl8139_eeprom_delay() Tom Rini
[PATCH 07/10] net: rtl8139: Split out common and non-DM functions Tom Rini
[PATCH 08/10] net: rtl8139: Use PCI_DEVICE() to define PCI device compat list Tom Rini
[PATCH 09/10] net: rtl8139: Read HW address from EEPROM only on probe Tom Rini
[PATCH 10/10] net: rtl8139: Add DM support Tom Rini
[PATCH] net: tftp: fix option validation as per RFCs Tom Rini
[PATCH] net: move random_port() to dns Tom Rini
[PATCHv5][ 1/7] board: tbs2910: disable loadb and loads commands Tom Rini
[PATCHv5][ 2/7] board: tbs2910: disable CONFIG_GZIP Tom Rini
[PATCHv5][ 3/7] board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig Tom Rini
[PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions Tom Rini
[PATCHv5][ 6/7] board: tbs2910: Enable distro_boot support. Tom Rini
[PATCHv5][ 7/7] board: tbs2910: add documentation Tom Rini
[PATCH 00/16] spi: dm-conversion (part3) Tom Rini
[PATCH v2 15/23] ti: Drop panda board Tom Rini
[PATCH v2 15/23] ti: Drop panda board Tom Rini
[PATCH 0/4] arm: fix clang build errors Tom Rini
Please pull u-boot-dm/next Tom Rini
Pull request: u-boot-spi/master Tom Rini
[PATCH 2/2] omap4: sdp: convert to device model Tom Rini
[PATCH 2/2] omap4: sdp: convert to device model Tom Rini
[PULL] u-boot-socfpga/master Tom Rini
[PULL] u-boot-usb/master Tom Rini
[PATCH 2/2] omap4: sdp: convert to device model Tom Rini
[PATCH] net: eth-uclass: Fix message if mac is coming from DT or ROM Tom Rini
[PATCH 6/6] checkpatch.pl: Request if() instead #ifdef Tom Rini
[PATCH 0/2] omap4: panda: convert to device model Tom Rini
[PATCH 0/2] omap4: panda: convert to device model Tom Rini
[Pull u-boot-mmc] Please pull mmc-2020-6-15 Tom Rini
[PATCH] optee: fix copy of optee reserved-memory node Tom Rini
[PATCH] trivial: Fix booot occurences Tom Rini
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Tom Rini
[PATCH 1/1] config: qemu: increase SYS_MALLOC_F_LEN Tom Rini
[PATCH] env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDR Tom Rini
[PATCH 6/6] checkpatch.pl: Request if() instead #ifdef Tom Rini
[PATCH] regulator: fix: enable gpio when requested Tom Rini
Pull request for UEFI sub-system for efi-2020-07-rc5 Tom Rini
[PATCH] checkpatch: fix a false check against wchar/utf-16 string Tom Rini
[PATCH] checkpatch.pl: Fully re-sync with v5.7 Tom Rini
[PATCH 1/1] spl: fix ext4fs_mount return code handling Tom Rini
[PATCH 2/2] hack to boot with 2020.01 Tom Rini
[PATCH] common: hash: Remove a debug printf statement Tom Rini
[PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200616 Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
[PATCHv2 01/31] Convert CONFIG_AM335X_LCD to Kconfig Tom Rini
[PATCHv2 02/31] Convert CONFIG_ARCH_MISC_INIT to Kconfig Tom Rini
[PATCHv2 03/31] Convert CONFIG_ARM_PL180_MMCI to Kconfig Tom Rini
[PATCHv2 04/31] Convert CONFIG_ARMV7_PSCI et al to Kconfig Tom Rini
[PATCHv2 05/31] Convert CONFIG_AT91_GPIO to Kconfig Tom Rini
[PATCHv2 06/31] Convert CONFIG_ATMEL_HLCD to Kconfig Tom Rini
[PATCHv2 07/31] Convert CONFIG_ATMEL_NAND_HW_PMECC et al to Kconfig Tom Rini
[PATCHv2 08/31] Convert CONFIG_ATMEL_USART to Kconfig Tom Rini
[PATCHv2 09/31] bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to Kconfig Tom Rini
[PATCHv2 10/31] Convert CONFIG_BAUDRATE to Kconfig Tom Rini
[PATCHv2 11/31] Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig Tom Rini
[PATCHv2 12/31] Convert CONFIG_BOOTARGS to Kconfig Tom Rini
[PATCHv2 13/31] Convert CONFIG_BCH to Kconfig Tom Rini
[PATCHv2 14/31] Convert CONFIG_BOARD_TYPES to Kconfig Tom Rini
[PATCHv2 15/31] arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to Kconfig Tom Rini
[PATCHv2 16/31] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig Tom Rini
[PATCHv2 17/31] Convert CONFIG_BOOTP_DNS2 to Kconfig Tom Rini
[PATCHv2 18/31] Convert CONFIG_BOUNCE_BUFFER to Kconfig Tom Rini
[PATCHv2 19/31] Convert CONFIG_BUILD_TARGET to Kconfig Tom Rini
[PATCHv2 20/31] Convert CONFIG_CMDLINE_EDITING to Kconfig Tom Rini
[PATCHv2 21/31] Convert CONFIG_CONS_INDEX to Kconfig Tom Rini
[PATCHv2 22/31] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig Tom Rini
[PATCHv2 23/31] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig Tom Rini
[PATCHv2 24/31] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Tom Rini
[PATCHv2 25/31] nxp: Finish switch to CONFIG_NXP_ESBC Tom Rini
[PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Tom Rini
[PATCHv2 27/31] Convert CONFIG_BOOTM_NETBSD to Kconfig Tom Rini
[PATCHv2 28/31] Kconfig: Remove CONFIG_CLOCKS_IN_MHZ Tom Rini
[PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support Tom Rini
[PATCHv2 30/31] spi: Update build guard for DM objects to cover SPL/TPL Tom Rini
[PATCHv2 31/31] Convert CONFIG_CADENCE_QSPI to Kconfig Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
[RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC Tom Rini
[PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
mx6sabresd: Trying to use qca,clk-out-frequency Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
[PATCH v2 1/3] logos: Add sunxi logo Tom Rini
[PATCH] phy: atheros: ar8035: Fix clock output calculation Tom Rini
U-Boot atheros PHY support and cubox ethernet Tom Rini
[GIT PULL] TI changes for v2020.10 next Tom Rini
[PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees Tom Rini
[GIT PULL] TI changes for v2020.10 next Tom Rini
[PULL u-boot] Please pull u-boot-amlogic-20200618 Tom Rini
[GIT PULL] TI changes for v2020.10 next Tom Rini
Mainlining advice for new (MStar/SigmaStar) ARMv7 SoC family Tom Rini
[PATCH v2 3/9] env: correctly handle result in env_init Tom Rini
[PATCH v2 5/9] sandbox: support the change of env location Tom Rini
[PATCH v2 1/9] env: add absolute path at CONFIG_ENV_EXT4_FILE Tom Rini
[PATCH v2 2/9] env: ext4: set gd->env_valid Tom Rini
[PATCH 1/4] phy: atheros: ar8035: Fix clock output calculation Tom Rini
[PATCH 2/4] net: fec: Allow the PHY node to be retrieved Tom Rini
[PATCH 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1 Tom Rini
[PATCH 4/4] mx6cuboxi: Convert to DM_ETH Tom Rini
[PATCH] Azure/GitLab: Move to latest Docker image Tom Rini
[PATCH v3 2/4] arm: Remove d2net_v2 board Tom Rini
[PATCH 1/1] Dockerfile: add libguestfs-tools package Tom Rini
[PATCH 1/1] Dockerfile: add missing package efitools Tom Rini
Please pull u-boot-video/next Tom Rini
[PATCH] Azure/GitLab: Move to latest Docker image Tom Rini
Please pull u-boot-video Tom Rini
[PATCH] common/board_f: Respect original FDT size while relocating Tom Rini
[EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory Tom Rini
[RESEND PATCH v5 1/4] cmd: env: add option for quiet output on env info Tom Rini
[RESEND PATCH v5 2/4] cmd: env: check real location for env info command Tom Rini
repurposing dhcp command Tom Rini
[PATCH] common/board_f: Respect original FDT size while relocating Tom Rini
[RFC PATCH 0/4] CONFIG_IS_ENABLED magic Tom Rini
[PATCH v2 3/9] env: correctly handle result in env_init Tom Rini
[PATCH v2 5/9] sandbox: support the change of env location Tom Rini
[PATCH] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left Tom Rini
Pull request, u-boot-tegra/master Tom Rini
[PULL] Pull request: u-boot-stm32 for v2020.07= u-boot-stm32-20200619 Tom Rini
Pull request for UEFI sub-system for efi-2020-07-rc5 (2) Tom Rini
[RFC 0/4] drivers: footprint reduction proposal Tom Rini
[PATCH v3 2/4] arm: Remove d2net_v2 board Tom Rini
Pull request (-next): u-boot-spi/master Tom Rini
[PULL] u-boot-sh/master Tom Rini
[PULL] u-boot-sh/net Tom Rini
[PATCH 03/16] dh_imx6: Switch to full DM-aware Tom Rini
Please pull u-boot-dm/next Tom Rini
Please pull u-boot-dm/next Tom Rini
[RFC 0/4] drivers: footprint reduction proposal Tom Rini
[PATCH 1/1] gitlab: show skipped Python tests Tom Rini
[PATCH 1/1] gitlab: show skipped Python tests Tom Rini
[U-Boot] Pull request: u-boot-riscv/master Tom Rini
[ANN] U-Boot v2020.07-rc5 released Tom Rini
[PATCH] travis-ci: Update QEMU RISC-V run command Tom Rini
[GIT PULL] Pull request: u-boot-imx u-boot-imx-20200623 Tom Rini
[PATCH v2 3/9] env: correctly handle result in env_init Tom Rini
[PATCH] [RFC] tools: fitmount: fuse mount fit images Tom Rini
Current Azure CI failures Tom Rini
[PATCH 1/1] gitlab: show skipped Python tests Tom Rini
[PATCH v2 3/9] env: correctly handle result in env_init Tom Rini
[PATCH] [RFC] tools: fitmount: fuse mount fit images Tom Rini
[PULL] please pull u-boot-mmc mmc-2020-6-24 Tom Rini
Current Azure CI failures Tom Rini
[PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression Tom Rini
[PATCH v3] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left Tom Rini
[PATCH] psci: add 'static inline' to invoke_psci_fn() stub Tom Rini
[PATCH 1/2] cmd: booti: Fix spelling of "environment". Tom Rini
[PATCH 2/2] doc: sifive: Fix spelling of "environment". Tom Rini
[PATCH V2] nvme: Invalidate dcache before submitting admin cmd Tom Rini
[PATCH] phy: atheros: Fix the "qca,clk-out-frequency" example Tom Rini
[PATCH] zfs: fix missing include for disk_partition definition Tom Rini
[PATCH 03/16] dh_imx6: Switch to full DM-aware Tom Rini
[GIT PULL] Xilinx patches for v2020.10 Tom Rini
[PATCH 6/6] env: Add support for explicit write access list Tom Rini
[PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression Tom Rini
Pull request for UEFI sub-system for efi-2020-07-rc6 Tom Rini
[PATCH v2 00/39] Tidy up the 'bd' command. Tom Rini
[PATCH U-BOOT v3 00/30] PLEASE TEST fs: btrfs: Re-implement btrfs support using code from btrfs-progs Tom Rini
[PATCH 1/4] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH Tom Rini
[PATCH v3 1/1] phy: add support for stingray PAXB PHY controller Tom Rini
[PATCH 1/1] gitlab: show skipped Python tests Tom Rini
[PATCH] rk3399: Add BOOTENV_SF command Tom Rini
microSD Breakout Port Tom Rini
[PATCH v3 08/14] cmd: env: add env select command Tom Rini
[PATCH v3 03/14] env: sf: avoid space in backend name Tom Rini
[PATCH v3 04/14] env: correctly handle env_load_prio Tom Rini
[PATCH v3 05/14] env: nowhere: add .load ops Tom Rini
[PATCH v3 06/14] env: the ops driver load becomes mandatory in struct env_driver Tom Rini
[PATCH v3 07/14] cmd: env: add env load command Tom Rini
[PATCH] x86: Don't build some unused objects in TPL Tom Rini
[PATCH v2 1/5] arm: kirkwood: add DT spi0 alias to LaCie boards Tom Rini
[GIT PULL] Uboot socfpga Tom Rini
Pull request: u-boot-rockchip-20200628 Tom Rini
Please pull u-boot-video Tom Rini
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Tom Rini
[PATCH 03/16] dh_imx6: Switch to full DM-aware Tom Rini
[PATCH] cmd: add clone command Tom Rini
[PATCH] gitlab: add pycrypto for arm64 Tom Rini
Please pull u-boot-video Tom Rini
[PULL] u-boot-mips Tom Rini
[PATCH] gitlab: add pycrypto for arm64 Tom Rini
[PATCH v4 6/6] rockchip: make_fit_atf: add signature handling Tom Rini
[PATCH 1/8] dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching Tom Rini
[PULL] u-boot-mips Tom Rini
[PATCH v4 6/6] rockchip: make_fit_atf: add signature handling Tom Rini
[PATCHv5 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Tom Rini
[PATCHv5 1/3] spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a) Tom Rini
[PATCHv5 2/3] spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX) Tom Rini
[PATCHv2 01/31] Convert CONFIG_AM335X_LCD to Kconfig Tom Rini
[PATCHv2 02/31] Convert CONFIG_ARCH_MISC_INIT to Kconfig Tom Rini
[PATCHv2 03/31] Convert CONFIG_ARM_PL180_MMCI to Kconfig Tom Rini
[PATCHv2 05/31] Convert CONFIG_AT91_GPIO to Kconfig Tom Rini
[PATCHv2 06/31] Convert CONFIG_ATMEL_HLCD to Kconfig Tom Rini
[PATCHv2 07/31] Convert CONFIG_ATMEL_NAND_HW_PMECC et al to Kconfig Tom Rini
[PATCHv2 08/31] Convert CONFIG_ATMEL_USART to Kconfig Tom Rini
[PATCHv2 09/31] bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to Kconfig Tom Rini
[PATCHv2 10/31] Convert CONFIG_BAUDRATE to Kconfig Tom Rini
[PATCHv2 11/31] Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig Tom Rini
[PATCHv2 12/31] Convert CONFIG_BOOTARGS to Kconfig Tom Rini
[PATCHv2 13/31] Convert CONFIG_BCH to Kconfig Tom Rini
[PATCHv2 14/31] Convert CONFIG_BOARD_TYPES to Kconfig Tom Rini
[PATCHv2 15/31] arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to Kconfig Tom Rini
[PATCHv2 16/31] arm: abb secu1: Convert CONFIG_BOOTDELAY to Kconfig Tom Rini
[PATCHv2 17/31] Convert CONFIG_BOOTP_DNS2 to Kconfig Tom Rini
[PATCHv2 18/31] Convert CONFIG_BOUNCE_BUFFER to Kconfig Tom Rini
[PATCHv2 19/31] Convert CONFIG_BUILD_TARGET to Kconfig Tom Rini
[PATCHv2 20/31] Convert CONFIG_CMDLINE_EDITING to Kconfig Tom Rini
[PATCHv2 21/31] Convert CONFIG_CONS_INDEX to Kconfig Tom Rini
[PATCHv2 22/31] arm: toradex: Convert CONFIG_CONSOLE_MUX to Kconfig Tom Rini
[PATCHv2 23/31] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig Tom Rini
[PATCHv2 24/31] arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB Tom Rini
[PATCHv2 25/31] nxp: Finish switch to CONFIG_NXP_ESBC Tom Rini
[PATCHv2 26/31] arm: imx: Finish migration of CONFIG_CSF_SIZE to Kconfig Tom Rini
[PATCHv2 27/31] Convert CONFIG_BOOTM_NETBSD to Kconfig Tom Rini
[PATCHv2 28/31] Kconfig: Remove CONFIG_CLOCKS_IN_MHZ Tom Rini
[PATCHv2 29/31] spi: Enable missing CONFIG_SPL_DM_SPI support Tom Rini
[PATCHv2 31/31] Convert CONFIG_CADENCE_QSPI to Kconfig Tom Rini
[PATCH v2] cmd: add a panic command Tom Rini
[U-Boot] [PATCH v1 01/10] mmc: add missing space before comment delimiter Tom Rini
[U-Boot] [PATCH v1 03/10] serial: pxa: clean-up platform data include file Tom Rini
[U-Boot] [PATCH v1 04/10] Makefile: allow dm_mmc without of_control Tom Rini
[U-Boot] [PATCH v1 05/10] dm: core: gracefully handle alias seq without of Tom Rini
[U-Boot] [PATCH v1 06/10] kconfig: mmc: move pxa_mmc_generic to kconfig Tom Rini
[U-Boot] [PATCH v1 07/10] arm: pxa: mmc: add driver model support Tom Rini
[U-Boot] [PATCH v1 08/10] colibri_pxa270_defconfig: enable cmd_dm Tom Rini
[U-Boot] [PATCH v1 09/10] colibri_pxa270: add mmc platform data Tom Rini
[U-Boot] [PATCH v1 10/10] colibri_pxa270_defconfig: enable dm_mmc Tom Rini
[PATCH] configs: powerpc: add usb (host) mass storage support Tom Rini
[PATCH 1/4] am335x: Update list of defconfigs Tom Rini
[PATCH 2/4] omap3_beagle: Disable USB support Tom Rini
[PATCH 3/4] ti816x_evm: Enable DM_MMC Tom Rini
[PATCH 4/4] ti814x: Remove platform Tom Rini
[PATCH 2/4] omap3_beagle: Disable USB support Tom Rini
[PATCH 2/4] omap3_beagle: Disable USB support Tom Rini
[PATCH 2/4] omap3_beagle: Disable USB support Tom Rini
[PATCH] omap3_beagle: Finish current outstanding DM migrations Tom Rini
[PATCH] omap3_beagle: Finish current outstanding DM migrations Tom Rini
[PULL] u-boot-mips Tom Rini
[PATCH 1/4] am335x: Update list of defconfigs Tom Rini
[PATCH 3/4] ti816x_evm: Enable DM_MMC Tom Rini
[PATCH 4/4] ti814x: Remove platform Tom Rini
[PATCH] Correct sun8i-v3s SRAM size Maxime Ripard
[PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN Maxime Ripard
[PATCH v2 1/3] logos: Add sunxi logo Maxime Ripard
[PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO Maxime Ripard
[PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO Maxime Ripard
[PATCH] sunxi: Add support for using UART4 as console on A64 Maxime Ripard
[PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64 Peter Robinson
[PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64 Peter Robinson
rockchip: enable PCIe and NVMe on Pinebook Pro Peter Robinson
[PATCH 1/3] rockchip: Pinebook Pro: enable rng to provide an entropy source Peter Robinson
[PATCH 2/3] rockchip: Pinebook Pro: Fix USB and the USB attached keyboard Peter Robinson
[PATCH 3/3] rockchip: Pinebook Pro: Fix SPI flash and store env on it Peter Robinson
USB patch for rpi4 Peter Robinson
USB patch for rpi4 Peter Robinson
[PATCH v2 15/23] ti: Drop panda board Peter Robinson
[PATCH v2 15/23] ti: Drop panda board Peter Robinson
[PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees Peter Robinson
[PATCH 2/2] ARM: tegra: Enable PSCI support for Tegra210 and Tegra186 Peter Robinson
[PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support Stefan Roese
[PATCH 0/3] watchdog: honour hw_margin_ms property Stefan Roese
[PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon Stefan Roese
[PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon Stefan Roese
[PATCH 1/6] Update MEM_SUPPORT_64BIT_DATA to be always defined Stefan Roese
[PATCH 2/6] cmd: mem: Use a macro to avoid #ifdef in help Stefan Roese
[PATCH 3/6] cmd: mem: Drop #ifdef for MEM_SUPPORT_64BIT_DATA Stefan Roese
[PATCH 6/6] cmd: Add a memory-search command Stefan Roese
[PATCH 0/3] watchdog: honour hw_margin_ms property Stefan Roese
[PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache Stefan Roese
[PATCH] mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage Stefan Roese
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Stefan Roese
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Stefan Roese
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Stefan Roese
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Stefan Roese
[PATCH] mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage Stefan Roese
[PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support Stefan Roese
[PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq() Stefan Roese
[PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq() Stefan Roese
[PATCH v1 0/9] mips: Add Octeon DDR4 init code Stefan Roese
[PATCH v1 1/9] mips: octeon: dts: mrvl, cn73xx.dtsi: Add memory controller DT node Stefan Roese
[PATCH v1 2/9] mips: octeon: Add octeon-model.h header Stefan Roese
[PATCH v1 3/9] mips: octeon Add cvmx/cvmx-lmcx-defs.h header Stefan Roese
[PATCH v1 4/9] mips: octeon: Add octeon_ddr.h header Stefan Roese
[PATCH v1 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3) Stefan Roese
[PATCH v1 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3) Stefan Roese
[PATCH v1 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3) Stefan Roese
[PATCH v1 8/9] mips: octeon: dram.c: Add RAM driver support Stefan Roese
[PATCH v1 9/9] mips: octeon: octeon_ebb7304: Add DDR4 support Stefan Roese
[PATCH] drivers: spi: Add SPI controller driver for Octeon Stefan Roese
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Stefan Roese
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Stefan Roese
[v2 1/3] Watchdog: introduce ARM SBSA watchdog driver Stefan Roese
[PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support Stefan Roese
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Stefan Roese
[PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support Stefan Roese
[PATCH v2 12/12] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support Stefan Roese
[PATCH v2 10/12] mips: octeon: Initial minimal support for the Marvell Octeon SoC Stefan Roese
[PATCH v3 0/4] mips: Add initial Octeon MIPS64 base support Stefan Roese
[PATCH v3 1/4] sysreset: Add Octeon sysreset driver Stefan Roese
[PATCH v3 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC Stefan Roese
[PATCH v3 3/4] mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file Stefan Roese
[PATCH v3 4/4] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support Stefan Roese
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Stefan Roese
[PATCH v2 8/8] board: ns3: start sp805 watchdog service Stefan Roese
[PATCH v1 0/5] mips: Improve initial Octeon MIPS64 support Stefan Roese
[PATCH v1 1/5] mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code Stefan Roese
[PATCH v1 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache Stefan Roese
[PATCH v1 3/5] mips: octeon: octeon_ebb7304: Change TEXT_BASE to L2 cache Stefan Roese
[PATCH v1 4/5] mips: cache: Make invalidate_dcache_range() weak to enable overwrite Stefan Roese
[PATCH v1 5/5] mips: octeon: Add empty invalidate_dcache_range() Stefan Roese
[PATCH v3 7/7] configs: ns3: enable sp805 watchdog driver Stefan Roese
[PATCH v2 1/5] arm: kirkwood: add DT spi0 alias to LaCie boards Stefan Roese
[PATCH v2 2/5] arm: kirkwood: convert LaCie boards to DM_SPI_FLASH Stefan Roese
[PATCH v2 3/5] arm: kirkwood: switch LaCie boards to sata_mv driver Stefan Roese
[PATCH v2 4/5] arm: kirkwood: enable DM_USB for LaCie board Stefan Roese
[PATCH v2 5/5] arm: kirkwood: enable DM_ETH for LaCie board Stefan Roese
[PATCH] sync helios4 config to clearfog and dts to kernel Stefan Roese
[PATCH 1/2] arm: mvebu: a38x: Fix typo Stefan Roese
[PATCH 2/2] arm: mvebu: a38x: Adjust UTMI PHY parameters Stefan Roese
[PATCH v1 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache Stefan Roese
[PATCH v3 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC Stefan Roese
[PATCH v4 0/4] mips: Add initial Octeon MIPS64 base support Stefan Roese
[PATCH v4 1/4] sysreset: Add Octeon sysreset driver Stefan Roese
[PATCH v4 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC Stefan Roese
[PATCH v4 3/4] mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file Stefan Roese
[PATCH v4 4/4] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support Stefan Roese
[PATCH v2 0/5] mips: Improve initial Octeon MIPS64 support Stefan Roese
[PATCH v2 1/5] mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code Stefan Roese
[PATCH v2 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache Stefan Roese
[PATCH v2 3/5] mips: octeon: octeon_ebb7304: Change TEXT_BASE to L2 cache Stefan Roese
[PATCH v2 4/5] mips: cache: Make invalidate_dcache_range() weak to enable overwrite Stefan Roese
[PATCH v2 5/5] mips: octeon: Add empty invalidate_dcache_range() Stefan Roese
[PATCH] Nokia RX-51: Add link for u-boot-gen-combined script to README file Pali Rohár
[PATCH] Nokia RX-51: Fix checking if serial console was enabled Pali Rohár
Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900) Pali Rohár
[PATCH] armv8: ls1012a: RGMII ports require internal delay Chaitanya Sakinam
[PATCH 1/3] mx6ul_14x14_evk: Enable SPL USB and SDP support Otavio Salvador
[PATCH 2/3] mx6ul_14x14_evk: Enable eMMC boot support Otavio Salvador
[PATCH 3/3] mx6ul_14x14_evk: Change environment offset to overlap with U-Boot Otavio Salvador
[PATCH 1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support Otavio Salvador
[PATCH 2/2] mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper Otavio Salvador
[PATCH v2] i2c: octeon_i2c: Add I2C controller driver for Octeon Heiko Schocher
[PATCH v3 01/10] rtc: add dm_rtc_read helper and ->read method Heiko Schocher
[PATCH v3 02/10] rtc: add dm_rtc_write() helper Heiko Schocher
[PATCH v3 03/10] rtc: fall back to ->{read,write} if ->{read,write}8 are not provided Heiko Schocher
[PATCH v3 04/10] rtc: pcf2127: provide ->read method Heiko Schocher
[PATCH v3 05/10] rtc: pcf2127: provide ->write method Heiko Schocher
[PATCH v3 07/10] rtc: sandbox-rtc: fix set method Heiko Schocher
[PATCH v3 06/10] rtc: add rtc command Heiko Schocher
[PATCH v3 08/10] rtc: i2c_rtc_emul: catch any write to the "reset" register Heiko Schocher
[PATCH v3 09/10] test: dm: rtc: add test of dm_rtc_read, dm_rtc_write Heiko Schocher
[PATCH v3 10/10] test: dm: rtc: add tests of rtc shell command Heiko Schocher
[PATCH] test_sleep.py: make sleep time and margin configurable Heiko Schocher
[PATCH v9 1/2] i2c: i2c-cortina: added CAxxxx I2C support Heiko Schocher
[PATCH] rockchip: i2c: fix switch to new implementation for rk3188 Heiko Schocher
[PATCH 1/1] smbios: empty strings in smbios_add_string() Heinrich Schuchardt
[PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties Heinrich Schuchardt
[PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties Heinrich Schuchardt
[PATCH 08/13] test/py: efi_secboot: remove all "re.search" Heinrich Schuchardt
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS Heinrich Schuchardt
[PATCH 1/1] config: remove CONFIG_ARMV8_SWITCH_TO_EL1 from whitelist.txt Heinrich Schuchardt
[PATCH v2 12/13] armv8: layerscape: relocate spin table if EFI_LOADER is enabled Heinrich Schuchardt
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS Heinrich Schuchardt
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS Heinrich Schuchardt
[PATCH 1/4] crypto/fsl: make SEC%u status line consistent Heinrich Schuchardt
[PATCH 2/4] crypto/fsl: export caam_get_era() Heinrich Schuchardt
[PATCH 4/4] crypto/fsl: add RNG support Heinrich Schuchardt
Pull request for UEFI sub-system for efi-2020-07-rc4 Heinrich Schuchardt
[PATCH 4/4] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH 4/4] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH 4/4] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH 4/4] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH 1/1] efi_loader: comments EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL Heinrich Schuchardt
[PATCH 1/1] sandbox: handling out of memory Heinrich Schuchardt
[PATCH 1/1] doc: move Clang documentation to HTML Heinrich Schuchardt
[PATCH 1/1] doc: Coccinelle: move to HTML doc Heinrich Schuchardt
Pull request for UEFI sub-system for efi-2020-07-rc4 (2) Heinrich Schuchardt
[PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS Heinrich Schuchardt
[PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN Heinrich Schuchardt
[PATCH 1/1] efi_loader: printf code in efi_image_parse() Heinrich Schuchardt
[PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK Heinrich Schuchardt
[PATCH 2/5] arm: qemu: enable LPAE on 32-bit Heinrich Schuchardt
[PATCH 2/5] arm: qemu: enable LPAE on 32-bit Heinrich Schuchardt
[PATCH 3/5] arm: qemu: implement enable_caches() Heinrich Schuchardt
[PATCH 4/5] arm: qemu: disable the EFI workaround for older GRUB Heinrich Schuchardt
[PATCH 5/5] arm: qemu: override flash accessors to use virtualizable instructions Heinrich Schuchardt
[PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq() Heinrich Schuchardt
Out of bounds access in arch/arm/cpu/armv7/iproc-common/armpll.c Heinrich Schuchardt
[U-Boot] [PATCH v2 04/16] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC Heinrich Schuchardt
[PATCH 1/5] arm: enable allocate-on-read for LPAE's DCACHE_WRITEBACK Heinrich Schuchardt
[PATCH] test: add dependency for UT_LOG Heinrich Schuchardt
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Heinrich Schuchardt
[PATCH 1/1] sandbox: spi: sandbox_sf_state_name() is required Heinrich Schuchardt
[PATCH 1/1] config: qemu: increase SYS_MALLOC_F_LEN Heinrich Schuchardt
[PATCH 2/5] arm: qemu: enable LPAE on 32-bit Heinrich Schuchardt
[PATCH] test: add dependency for UT_LOG Heinrich Schuchardt
[PATCH 1/1] sandbox: handling out of memory Heinrich Schuchardt
[PATCH 1/1] sandbox: make RAM size configurable Heinrich Schuchardt
[PATCH 1/1] sandbox: handling out of memory Heinrich Schuchardt
[PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq() Heinrich Schuchardt
[RESEND v2 1/1] log: don't show function by default Heinrich Schuchardt
[PATCH 1/1] arm: wandboard: move CONFIG_MXC_UART to defconfig Heinrich Schuchardt
[PATCH 1/1] mtd: cfi_flash: use __raw_writeq(), __raw_readq() Heinrich Schuchardt
[PATCH 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN Heinrich Schuchardt
[PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN Heinrich Schuchardt
[PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN Heinrich Schuchardt
[PATCH 1/1] log: uclass_get_name() depends on CONFIG_SPL_DM Heinrich Schuchardt
[BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y Heinrich Schuchardt
[BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y Heinrich Schuchardt
[PATCH v2 10/17] efi_loader: image_loader: verification for all signatures should pass Heinrich Schuchardt
[PATCH] fs: fat: fix fat iteration Heinrich Schuchardt
[PATCH] fs: fat: fix fat iteration Heinrich Schuchardt
[PATCH v5 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop() Heinrich Schuchardt
[BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y Heinrich Schuchardt
[PATCH 2/8] lib: crypto: add public_key_verify_signature() Heinrich Schuchardt
[PATCH 8/8] test/py: efi_secboot: add test for intermediate certificates Heinrich Schuchardt
[PATCH 7/8] efi_loader: signature: rework for intermediate certificates support Heinrich Schuchardt
[PATCH 6/8] lib: crypto: export and enhance pkcs7_verify_one() Heinrich Schuchardt
[PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic Heinrich Schuchardt
[PATCH v2] common: fdt: Remove additional 4k space for fdt allocation Heinrich Schuchardt
[PATCH 1/1] doc: random number generation Heinrich Schuchardt
[RESEND v2 1/1] log: don't show function by default Heinrich Schuchardt
[PATCH RESEND v2 1/1] log: don't show function by default Heinrich Schuchardt
[PATCH 1/1] sunxi: Pine64-LTS: SMBIOS properties Heinrich Schuchardt
[PATCH 0/4] arm: fix clang build errors Heinrich Schuchardt
[PATCH v3 0/2] log: don't show function by default Heinrich Schuchardt
[PATCH v3 1/2] log: don't show function by default Heinrich Schuchardt
[PATCH v3 2/2] log: use BIT() instead of 1 << Heinrich Schuchardt
Pull request for UEFI sub-system for efi-2020-07-rc5 Heinrich Schuchardt
[PATCH 1/1] doc: random number generation Heinrich Schuchardt
[PATCH for v2020.10 1/1] cmd: drop fitupd command Heinrich Schuchardt
[PATCH 1/1] Dockerfile: add missing package efitools Heinrich Schuchardt
[PATCH v4 0/2] log: don't show function by default Heinrich Schuchardt
[PATCH v4 1/2] log: don't show function by default Heinrich Schuchardt
[PATCH v4 2/2] log: use BIT() instead of 1 << Heinrich Schuchardt
[PATCH v3] common: fdt: Remove additional 4k space for fdt allocation Heinrich Schuchardt
[PATCH 3/3] cmd: bootefi: Honor the address & size cells properties correctly Heinrich Schuchardt
[PATCH v2 1/1] cmd: bootefi: Honor the address & size cells properties correctly Heinrich Schuchardt
[PATCH 1/1] cmd: fdt: remove CMD_FDT_MAX_DUMP Heinrich Schuchardt
Pull request for UEFI sub-system for efi-2020-07-rc5 (2) Heinrich Schuchardt
[PATCH 1/1] efi_loader: prepare for read only OP-TEE variables Heinrich Schuchardt
qemu-system-riscv32: warning: No -bios option specified Heinrich Schuchardt
[PATCH 1/1] efi_loader: prepare for read only OP-TEE variables Heinrich Schuchardt
[PATCH 1/1] gitlab: show skipped Python tests Heinrich Schuchardt
[PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables Heinrich Schuchardt
[PATCH 1/1] gitlab: show skipped Python tests Heinrich Schuchardt
[PATCH 1/1] gitlab: show skipped Python tests Heinrich Schuchardt
[PATCH] cmd: bootefi: Fix fdt_size variable type in efi_carve_out_dt_rsv() Heinrich Schuchardt
[PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables Heinrich Schuchardt
[PATCH 1/1] gitlab: show skipped Python tests Heinrich Schuchardt
[PATCH 0/2] efi_loader: fix secure boot variables Heinrich Schuchardt
[PATCH 1/2] efi_loader: type of efi_secure_mode Heinrich Schuchardt
[PATCH 2/2] efi_loader: size of secure boot variables Heinrich Schuchardt
[PATCH 1/1] gitlab: show skipped Python tests Heinrich Schuchardt
[PATCH v3 6/6] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH v3 0/6] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH v3 0/6] crypto/fsl: add RNG support Heinrich Schuchardt
Pull request for UEFI sub-system for efi-2020-07-rc6 Heinrich Schuchardt
[PATCH 1/1] riscv: use log functions in fdt_fixup Heinrich Schuchardt
[PATCH v3 0/6] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH v3 6/6] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH 1/1] ARM: mx6: make CAAM usable on the i.MX6 boards Heinrich Schuchardt
[PATCH 1/1] crypto/fsl: correct printf() statement. Heinrich Schuchardt
[PATCH 1/1] crypto/fsl: unused value in caam_hash_update() Heinrich Schuchardt
[PATCH 1/1] fs: error handling in do_load() Heinrich Schuchardt
[PATCH] test/py: test_efi_fit: Update #size-cells to 1 Heinrich Schuchardt
[PATCH v3 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Heinrich Schuchardt
[PATCH v4 6/6] crypto/fsl: add RNG support Heinrich Schuchardt
[PATCH v2] test/py: test_efi_fit: Update #size-cells to 1 Heinrich Schuchardt
Fwd: [PATCH 1/1] riscv: use log functions in fdt_fixup Heinrich Schuchardt
[PATCH 1/1] efi_loader: fix incorrect use of EFI_EXIT() Heinrich Schuchardt
[PATCH v2 1/1] fs: error handling in do_load() Heinrich Schuchardt
[PATCH v2 1/1] riscv: use log functions in fdt_fixup Heinrich Schuchardt
[PATCH 1/1] efi_loader: rtc_mktime() called twice Heinrich Schuchardt
[PATCH 1/1] efi_loader: incorrect check against FDT_ADDR_T_NONE Heinrich Schuchardt
[PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY Heinrich Schuchardt
Pull request for UEFI sub-system for efi-2020-07-rc6 (2) Heinrich Schuchardt
[PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t Daniel Schwierzeck
[PATCH v2 03/12] mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM Daniel Schwierzeck
[PATCH v2 04/12] mips: cache: Make flush_cache() weak to enable overwrite Daniel Schwierzeck
[PATCH v2 05/12] mips: time: Only compile the weak get_tbclk() when needed Daniel Schwierzeck
[PATCH v2 06/12] mips: traps: Set WG bit in EBase register on Octeon Daniel Schwierzeck
[PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support Daniel Schwierzeck
[PATCH] mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage Daniel Schwierzeck
[PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t Daniel Schwierzeck
[PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t Daniel Schwierzeck
[PATCH 0/6] Add Qemu tests for MIPS Malta machine Daniel Schwierzeck
[PATCH 1/6] tools: add script for byte endianness swapping Daniel Schwierzeck
[PATCH 2/6] Makefile: add rule to generate u-boot-swap.bin Daniel Schwierzeck
[PATCH 3/6] mips: malta: build u-boot-swap.bin Daniel Schwierzeck
[PATCH 4/6] .gitlab-ci.yml: add Qemu tests for MIPS Malta board Daniel Schwierzeck
[PATCH 5/6] .travis.yml: add Qemu tests for MIPS Malta board Daniel Schwierzeck
[PATCH 6/6] .azure-pipelines.yml: add Qemu tests for MIPS Malta board Daniel Schwierzeck
[PATCH] patman: use new --u-boot option with checkpath.pl Daniel Schwierzeck
[PATCH] patman: use new --u-boot option with checkpath.pl Daniel Schwierzeck
[PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support Daniel Schwierzeck
[PATCH v2 12/12] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support Daniel Schwierzeck
[PATCH v2 10/12] mips: octeon: Initial minimal support for the Marvell Octeon SoC Daniel Schwierzeck
[PATCH v1 1/5] mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code Daniel Schwierzeck
[PATCH v1 2/5] mips: octeon: use mips_mach_early_init() to copy to L2 cache Daniel Schwierzeck
[PATCH v3 1/4] sysreset: Add Octeon sysreset driver Daniel Schwierzeck
[PATCH v3 2/4] mips: octeon: Initial minimal support for the Marvell Octeon SoC Daniel Schwierzeck
[PULL] u-boot-mips Daniel Schwierzeck
[PULL] u-boot-mips Daniel Schwierzeck
[PATCH] common: hash: Remove a debug printf statement Harald Seiler
[PATCH 6/6] env: Add support for explicit write access list Harald Seiler
[PATCH v2 01/23] configs: igep00x0: Enable DM_SPI Enric Balletbo i Serra
[PATCH v2 02/23] am335x: sl50: Enable DM_SPI Enric Balletbo i Serra
[PATCH 3/3] x86: quark: acpi: Replace _ADR() by _UID() in description of PCI host bridge Andy Shevchenko
U-boot Designware SPI driver issue Yakov Shmulevich
[PATCH 4/4] mx6cuboxi: Convert to DM_ETH Baruch Siach
U-Boot mainline: Digilent Zybo-Z7 support Michal Simek
U-Boot mainline: Digilent Zybo-Z7 support Michal Simek
U-Boot mainline: Digilent Zybo-Z7 support Michal Simek
[PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card Michal Simek
[PATCH 6/6] cmd: Add a memory-search command Michal Simek
[PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card Michal Simek
[PATCH 6/6] cmd: Add a memory-search command Michal Simek
[PATCH v2] doc: board: xilinx: zynq.rst: add description how to flash a SD card Michal Simek
[PATCH] net: xilinx: axi_emac: Fix endless loop when no PHYs are connected Michal Simek
[PATCH 6/6] cmd: Add a memory-search command Michal Simek
[PATCH 6/6] cmd: Add a memory-search command Michal Simek
[PATCH] board: topic-miami: Set FCLK1 to 150MHz Michal Simek
[PATCH] board: zynqmp: Fix for wrong AMS setting by ROM Michal Simek
[PATCH] topic: zynqmp: Add support for zynqmp-xilinx-xdp platform Michal Simek
[PATCH] trivial: Fix booot occurences Michal Simek
[PATCH] Revert "lib: Improve _parse_integer_fixup_radix base 16 detection" Michal Simek
[PATCH 1/7] Revert "mmc: zynq: parse dt when probing" Michal Simek
[PATCH] i2c: eeprom: Use reg property instead of offset and size Michal Simek
[PATCH v2] common: fdt: Remove additional 4k space for fdt allocation Michal Simek
[PATCH v2] common: fdt: Remove additional 4k space for fdt allocation Michal Simek
[PATCH] net: eth-uclass: Fix message if mac is coming from DT or ROM Michal Simek
[PATCH] arm64: zynqmp: Print multiboot reg in decimal Michal Simek
[PATCH] xilinx: zynqmp: Enable pmufw config reloading Michal Simek
[PATCH v2] i2c: eeprom: Use reg property instead of offset and size Michal Simek
[PATCH] arm64: zynqmp: Define eeprom fixed partitions in DT Michal Simek
[PATCH v2] i2c: eeprom: Use reg property instead of offset and size Michal Simek
[PATCH v3] common: fdt: Remove additional 4k space for fdt allocation Michal Simek
[PATCH v3] common: fdt: Remove additional 4k space for fdt allocation Michal Simek
Setting DEVICE_TREE for xilinx_zynq_virt_defconfig? Michal Simek
[PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Michal Simek
[External] Re: [PATCH] arm64: zynqmp: Support converting pm_cfg_obj.c Michal Simek
[PATCH] xilinx: versal: Add new versal loadpdi command Michal Simek
[PATCH] xilinx: versal: Add new versal loadpdi command Michal Simek
[PATCH] arm64: zynqmp: Fix set_fdtfile() not to break u-boots DTB Michal Simek
[PATCH v2] xilinx: versal: Add new versal loadpdi command Michal Simek
[PATCH] arm64: zynqmp: Fix set_fdtfile() not to break u-boots DTB Michal Simek
[PATCH] arm64: Remove CONFIG_SYS_FULL_VA macro Michal Simek
[PATCH] arm: versal: Fix xspi0 boot mode Michal Simek
[PATCH] mmc: zynq_sdhci: Remove global pointer Michal Simek
[PATCH] arm64: versal: Let U-Boot to update memory node by default Michal Simek
[PATCH] clk: versal: Remove alt_ref_clk from clock sources Michal Simek
[PATCH] firmware: zynqmp: Change panic logic in zynqmp_pmufw_load_config_object() Michal Simek
[PATCH 0/5] fpga: zynqpl: Add support for AES engine Michal Simek
[PATCH 0/5] xilinx: DT/Kconfig changes Michal Simek
[PATCH] net: gem: Disable PCS autonegotiation in case of fixed-link Michal Simek
[PATCH] spi: zynq_[q]spi: Convert config's to macro's Michal Simek
[PATCH] arm64: xilinx: Print fpga error value in hex Michal Simek
[PATCH] net: xilinx: axi_emac: Fix endless loop when no PHYs are connected Michal Simek
[PATCH] board: topic-miami: Set FCLK1 to 150MHz Michal Simek
[PATCH] board: zynqmp: Fix for wrong AMS setting by ROM Michal Simek
[PATCH] topic: zynqmp: Add support for zynqmp-xilinx-xdp platform Michal Simek
[PATCH] arm64: zynqmp: Print multiboot reg in decimal Michal Simek
[PATCH] xilinx: zynqmp: Enable pmufw config reloading Michal Simek
[PATCH v3] common: fdt: Remove additional 4k space for fdt allocation Michal Simek
[GIT PULL] Xilinx patches for v2020.10 Michal Simek
[PATCH] configs: ls1043aqds: Configure QSPI related configs Kuldeep Singh
[EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory Kuldeep Singh
[EXT] Re: [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory Kuldeep Singh
[PATCH] configs: ls1046aqds: Configure QSPI related configs Kuldeep Singh
[PATCH] configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN value Kuldeep Singh
[PATCH] configs: ls1012a/ls1046a: Define CONFIG_ENV_OVERWRITE Kuldeep Singh
[PATCH] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board Marcin Sloniewski
[PATCH v2] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board Marcin Sloniewski
[PATCH 2/7] mmc: zynq_sdhci: Define timing macro's Ashok Reddy Soma
[PATCH 2/7] mmc: zynq_sdhci: Define timing macro's Ashok Reddy Soma
[PATCH] net: cpsw: Add __maybe_unused to generated inlines Grygorii Strashko
[PATCH] board: ti: am335x_evm: Remove duplicate setting of bd_ram_ofs member Grygorii Strashko
[PATCH 0/3] AM654/J721e: Sync UDMA bindings Grygorii Strashko
[PATCH v2 1/2] fastboot: add support for 'reboot fastboot' command Roman Stratiienko
[PATCH v2 2/2] fastboot: add default fastboot_set_reboot_flag implementation Roman Stratiienko
[PATCH] musb-new: Use predefined configuration data for SUN50I_H6 Roman Stratiienko
[PATCH v3 3/3] fastboot: Add default fastboot_set_reboot_flag implementation Roman Stratiienko
[PATCH 0/6] revive Theobroma-Systems puma board Heiko Stuebner
[PATCH 1/6] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin Heiko Stuebner
[PATCH 2/6] board: puma: fix indentation for -u-boot.dtsi Heiko Stuebner
[PATCH 3/6] board: puma: reorganize devicetrees to actually work and match upstream Heiko Stuebner
[PATCH 4/6] board: puma: fix indentation of misc_init_r Heiko Stuebner
[PATCH 5/6] board: puma: allow building with TPL as well Heiko Stuebner
[PATCH 6/6] board: puma: remove separate fit generator Heiko Stuebner
[PATCH v2 0/8] revive Theobroma-Systems puma board Heiko Stuebner
[PATCH v2 1/8] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin Heiko Stuebner
[PATCH v2 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator Heiko Stuebner
[PATCH v2 3/8] rockchip: puma: fix indentation for -u-boot.dtsi Heiko Stuebner
[PATCH v2 4/8] rockchip: puma: fix indentation of misc_init_r Heiko Stuebner
[PATCH v2 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream Heiko Stuebner
[PATCH v2 6/8] rockchip: puma: remove separate fit generator Heiko Stuebner
[PATCH v2 7/8] rockchip: puma: drop special handling of usb host regulator Heiko Stuebner
[PATCH v2 8/8] rockchip: puma: enable new usb config options Heiko Stuebner
[PATCH v3 0/8] revive Theobroma-Systems puma board Heiko Stuebner
[PATCH v3 1/8] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin Heiko Stuebner
[PATCH v3 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator Heiko Stuebner
[PATCH v3 3/8] rockchip: puma: fix indentation for -u-boot.dtsi Heiko Stuebner
[PATCH v3 4/8] rockchip: puma: fix indentation of misc_init_r Heiko Stuebner
[PATCH v3 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream Heiko Stuebner
[PATCH v3 6/8] rockchip: puma: remove separate fit generator Heiko Stuebner
[PATCH v3 7/8] rockchip: puma: drop special handling of usb host regulator Heiko Stuebner
[PATCH v3 8/8] rockchip: puma: enable new usb config options Heiko Stuebner
[PATCH 1/2] net: phy: mscc: make clock-output configurable on vsc85xx Heiko Stuebner
[PATCH 2/2] net: phy: mscc: sync rx/tx delay settings with Linux on vsc85xx Heiko Stuebner
[PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY Heiko Stuebner
[PATCH v6 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey() Heiko Stuebner
[PATCH v6 3/8] lib: rsa: bring exp_len in line when generating a key_prop Heiko Stuebner
[PATCH v6 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop() Heiko Stuebner
[PATCH v6 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop() Heiko Stuebner
[PATCH v6 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations Heiko Stuebner
[PATCH v6 7/8] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE Heiko Stuebner
[PATCH v6 8/8] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE Heiko Stuebner
[PATCH v4 0/6] rockchip: make it possible to sign the u-boot.itb Heiko Stuebner
[PATCH v4 1/6] imx: mkimage_fit_atf: Fix FIT image if BL31.bin missing Heiko Stuebner
[PATCH v4 2/6] mkimage: fit_image: handle multiple errors when writing signatures Heiko Stuebner
[PATCH v4 3/6] spl: fit: dont set U_BOOT_ITS var if not build SPL_FIT support Heiko Stuebner
[PATCH v4 4/6] spl: fit: enable signing a generated u-boot.itb Heiko Stuebner
[PATCH v4 5/6] spl: fit: add Kconfig option to specify key-hint for fit_generator Heiko Stuebner
[PATCH v4 6/6] rockchip: make_fit_atf: add signature handling Heiko Stuebner
[PATCH v3 2/5] mkimage: fit_image: handle multiple errors when writing signatures Heiko Stuebner
[PATCH v3 0/5] rockchip: make it possible to sign the u-boot.itb Heiko Stuebner
[PATCH] cmd: add a panic command Heiko Stuebner
[PATCH v2] cmd: add a panic command Heiko Stuebner
[BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y Heiko Stübner
[BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y Heiko Stübner
[PATCH v4 6/6] rockchip: make_fit_atf: add signature handling Heiko Stübner
[PATCH v6 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY Heiko Stübner
[EXT] [PATCH v2 1/1] imx: rom api: fix image offset computation Sébastien Szymanski
[PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address Sébastien Szymanski
[EXT] [PATCH 1/1] power: pmic_pca9450: fix PCA9450A I2C address Sébastien Szymanski
[PATCH v2 1/1] power: pmic_pca9450: fix PCA9450A I2C address Sébastien Szymanski
[PATCH v4 0/5] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support Marek Szyprowski
[PATCH v4 1/5] powerpc: move ADDR_MAP to Kconfig Marek Szyprowski
[PATCH v4 2/5] arm: provide a function for boards init code to modify MMU virtual-physical map Marek Szyprowski
[PATCH v4 3/5] mmc: bcm283x: fix int to pointer cast Marek Szyprowski
[PATCH v4 4/5] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) Marek Szyprowski
[PATCH v4 5/5] config: Enable support for the XHCI controller on RPI4 board Marek Szyprowski
[PATCH v5 0/6] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support Marek Szyprowski
[PATCH v5 1/6] powerpc: move ADDR_MAP to Kconfig Marek Szyprowski
[PATCH v5 2/6] arm: update comments to the common style Marek Szyprowski
[PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map Marek Szyprowski
[PATCH v5 4/6] mmc: bcm283x: fix int to pointer cast Marek Szyprowski
[PATCH v5 5/6] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) Marek Szyprowski
[PATCH v5 6/6] config: Enable support for the XHCI controller on RPI4 board Marek Szyprowski
[PATCH] net: ping: reset stored IP once the command finishes Marek Szyprowski
[PATCH v2] net: ping: reset stored IP address Marek Szyprowski
[PATCH 02/13] efi_loader: image_loader: add a check against certificate type of authenticode AKASHI Takahiro
[PATCH 05/13] efi_loader: signature: make efi_hash_regions more generic AKASHI Takahiro
[PATCH 06/13] efi_loader: image_loader: verification for all signatures should pass AKASHI Takahiro
[PATCH 07/13] efi_loader: image_loader: add digest-based verification for signed image AKASHI Takahiro
[PATCH 08/13] test/py: efi_secboot: remove all "re.search" AKASHI Takahiro
[PATCH 1/1] efi_loader: validate load option AKASHI Takahiro
[PATCH 1/1] Dockerfile: add libguestfs-tools package AKASHI Takahiro
[BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y AKASHI Takahiro
[PATCH v2 00/17] efi_loader: rework/improve UEFI secure boot code AKASHI Takahiro
[PATCH v2 01/17] efi_loader: change efi objects initialization order AKASHI Takahiro
[PATCH v2 02/17] Revert "test: stabilize test_efi_secboot" AKASHI Takahiro
[PATCH v2 03/17] efi_loader: signature: replace debug to EFI_PRINT AKASHI Takahiro
[PATCH v2 04/17] efi_loader: variable: replace debug to EFI_PRINT AKASHI Takahiro
[PATCH v2 05/17] efi_loader: image_loader: replace debug to EFI_PRINT AKASHI Takahiro
[PATCH v2 06/17] efi_loader: image_loader: add a check against certificate type of authenticode AKASHI Takahiro
[PATCH v2 07/17] efi_loader: image_loader: retrieve authenticode only if it exists AKASHI Takahiro
[PATCH v2 08/17] efi_loader: signature: fix a size check against revocation list AKASHI Takahiro
[PATCH v2 09/17] efi_loader: signature: make efi_hash_regions more generic AKASHI Takahiro
[PATCH v2 10/17] efi_loader: image_loader: verification for all signatures should pass AKASHI Takahiro
[PATCH v2 11/17] efi_loader: image_loader: add digest-based verification for signed image AKASHI Takahiro
[PATCH v2 12/17] test/py: efi_secboot: remove all "re.search" AKASHI Takahiro
[PATCH v2 13/17] test/py: efi_secboot: fix test case 1g of test_authvar AKASHI Takahiro
[PATCH v2 14/17] test/py: efi_secboot: split "signed image" test case-1 into two cases AKASHI Takahiro
[PATCH v2 15/17] test/py: efi_secboot: add a test against certificate revocation AKASHI Takahiro
[PATCH v2 16/17] test/py: efi_secboot: add a test for multiple signatures AKASHI Takahiro
[PATCH v2 17/17] test/py: efi_secboot: add a test for verifying with digest of signed image AKASHI Takahiro
[PATCH 0/8] efi_loader: secure boot: support intermediate certificates in signature AKASHI Takahiro
[PATCH 1/8] lib: rsa: export rsa_verify_with_pkey() AKASHI Takahiro
[PATCH 2/8] lib: crypto: add public_key_verify_signature() AKASHI Takahiro
[PATCH 3/8] lib: crypto: enable x509_check_for_self_signed() AKASHI Takahiro
[PATCH 4/8] lib: crypto: import pkcs7_verify.c from linux AKASHI Takahiro
[PATCH 5/8] lib: crypto: add pkcs7_digest() AKASHI Takahiro
[PATCH 6/8] lib: crypto: export and enhance pkcs7_verify_one() AKASHI Takahiro
[PATCH 7/8] efi_loader: signature: rework for intermediate certificates support AKASHI Takahiro
[PATCH 8/8] test/py: efi_secboot: add test for intermediate certificates AKASHI Takahiro
[BUG] ut lib lib_rsa_verify_valid crashes on qemu_arm if RSA_VERIFY_WITH_PKEY=y AKASHI Takahiro
[PATCH 6/6] checkpatch.pl: Request if() instead #ifdef AKASHI Takahiro
[PATCH 1/2] test/py: efi_secboot: apply autopep8 AKASHI Takahiro
[PATCH 2/2] test/py: efi_secboot: more fixes against pylint AKASHI Takahiro
[PATCH 6/6] checkpatch.pl: Request if() instead #ifdef AKASHI Takahiro
[PATCH 6/8] lib: crypto: export and enhance pkcs7_verify_one() AKASHI Takahiro
[PATCH v2 0/8] efi_loader: secure boot: support intermediate certificates in signature AKASHI Takahiro
[PATCH v2 0/8] efi_loader: secure boot: support intermediate certificates in signature AKASHI Takahiro
[PATCH v2 1/8] lib: rsa: export rsa_verify_with_pkey() AKASHI Takahiro
[PATCH v2 2/8] lib: crypto: add public_key_verify_signature() AKASHI Takahiro
[PATCH v2 3/8] lib: crypto: enable x509_check_for_self_signed() AKASHI Takahiro
[PATCH v2 4/8] lib: crypto: import pkcs7_verify.c from linux AKASHI Takahiro
[PATCH v2 5/8] lib: crypto: add pkcs7_digest() AKASHI Takahiro
[PATCH v2 6/8] lib: crypto: export and enhance pkcs7_verify_one() AKASHI Takahiro
[PATCH v2 7/8] efi_loader: signature: rework for intermediate certificates support AKASHI Takahiro
[PATCH v2 8/8] test/py: efi_secboot: add test for intermediate certificates AKASHI Takahiro
[PATCH] checkpatch: fix a false check against wchar/utf-16 string AKASHI Takahiro
[PATCH v2 00/17] efi_loader: add capsule update support AKASHI Takahiro
[PATCH v2 01/17] common: update_tftp: remove unnecessary build check AKASHI Takahiro
[PATCH v2 02/17] dfu: add a hidden reverse-dependency on UPDATE_TFTP AKASHI Takahiro
[PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name() AKASHI Takahiro
[PATCH v2 04/17] common: update: add a generic interface for FIT image AKASHI Takahiro
[PATCH v2 05/17] dfu: export dfu_list AKASHI Takahiro
[PATCH v2 06/17] efi_loader: add option to initialise EFI subsystem early AKASHI Takahiro
[PATCH v2 07/17] efi_loader: define UpdateCapsule api AKASHI Takahiro
[PATCH v2 08/17] efi_loader: capsule: add capsule_on_disk support AKASHI Takahiro
[PATCH v2 09/17] efi_loader: capsule: add memory range capsule definitions AKASHI Takahiro
[PATCH v2 10/17] efi_loader: capsule: support firmware update AKASHI Takahiro
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image AKASHI Takahiro
[PATCH v2 12/17] dfu: add dfu_write_by_alt() AKASHI Takahiro
[PATCH v2 13/17] efi_loader: add firmware management protocol for raw image AKASHI Takahiro
[PATCH v2 14/17] cmd: add "efidebug capsule" command AKASHI Takahiro
[PATCH v2 15/17] tools: add mkeficapsule command for UEFI capsule update AKASHI Takahiro
[PATCH v2 16/17] test/py: add a test for efi firmware update capsule of FIT image AKASHI Takahiro
[PATCH v2 17/17] test/py: add a test for uefi firmware update capsule of raw image AKASHI Takahiro
[PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name() AKASHI Takahiro
[PATCH v2 03/17] dfu: rename dfu_tftp_write() to dfu_write_by_name() AKASHI Takahiro
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image AKASHI Takahiro
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image AKASHI Takahiro
[PATCH v2 13/17] efi_loader: add firmware management protocol for raw image AKASHI Takahiro
[PATCH v2 11/17] efi_loader: add firmware management protocol for FIT image AKASHI Takahiro
[PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables AKASHI Takahiro
[PATCH v2 1/1] efi_loader: prepare for read only OP-TEE variables AKASHI Takahiro
[PATCH] arm: socfpga: gen5: Enable cache driver in SPL Ley Foon Tan
[PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns Ley Foon Tan
[PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection Tan, Ley Foon
[PATCH v2 05/10] gpio: dw: Fix warnings about casting int to pointer Tan, Ley Foon
[PATCH v2 07/10] gpio: dw: Return output value when direction is out Tan, Ley Foon
[PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns Tan, Ley Foon
[PATCH] arm: socfpga: gen5: Enable cache driver in SPL Tan, Ley Foon
[PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns Tan, Ley Foon
[PATCH v2] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns Ley Foon Tan
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Tan, Ley Foon
[U-Boot] [PATCH v2 04/16] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC Tan, Ley Foon
[PATCH] lib: zlib: Remove offset pointer optimization in inftrees.c Ley Foon Tan
[PATCH] lib: zlib: Use post-increment only in inffast.c Ley Foon Tan
[PATCH] arm: socfpga: misc_s10: Fix EMAC register address calculation Ley Foon Tan
[GIT PULL] Uboot socfpga Tan, Ley Foon
[PATCH 1/2] mtd: nand: raw: denali: Assert reset before deassert Ley Foon Tan
[PATCH 2/2] mtd: nand: raw: denali: Wait for reset completion status Ley Foon Tan
[PATCH 2/2] sun8i-emac: Added sun8i-v3s-emac example to sun8i-v3s.dtsi Jagan Teki
[PATCH v8 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller Jagan Teki
[PATCH v8 2/2] board: presidio-asic: Add SPI NOR support Jagan Teki
[PATCH] phy: sun4i-usb: Align H6 initialization logic with the kernel Jagan Teki
[PATCH] sunxi: Silence warning about non-static inline function Jagan Teki
[PATCH] Correct sun8i-v3s SRAM size Jagan Teki
[PATCH 1/3] net: sun8i_emac: Use consistent clock bitfield definitions Jagan Teki
[PATCH 1/3] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY Jagan Teki
[PATCH] doc: driver-model: Update SPI migration status Jagan Teki
[PATCH v2] env: sf: Free the old env_flash Jagan Teki
[PATCH v2 0/4] rockchip: rk3399: Add SPI boot Jagan Teki
[PATCH v2 1/4] Makefile: Drop to handle rkspi image type Jagan Teki
[PATCH v2 2/4] roc-rk3399-pc: Mark default env from SPI Jagan Teki
[PATCH v2 3/4] roc-rk3399-pc: Add SPI boot Jagan Teki
[PATCH v2 4/4] doc: rockchip: Document SPI flash program steps Jagan Teki
[PATCH] rockchip: Add delay after link-training Jagan Teki
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Jagan Teki
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Jagan Teki
Pull request: u-boot-sunxi/master Jagan Teki
Pull request: u-boot-spi/master Jagan Teki
[PATCH v13 00/19] RISC-V SiFive FU540 support SPL Jagan Teki
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Jagan Teki
[PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model Jagan Teki
[PATCHv4 3/3] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* Jagan Teki
[PATCHv2 01/36] dm: spi: Convert Freescale ESPI driver to driver model Jagan Teki
[PATCH v3 0/4] rockchip: rk3399: Add SPI boot Jagan Teki
[PATCH v3 1/4] Makefile: Drop to handle rkspi image type Jagan Teki
[PATCH v3 2/4] roc-rk3399-pc: Mark default env from SPI Jagan Teki
[PATCH v3 3/4] roc-rk3399-pc: Add SPI boot Jagan Teki
[PATCH v3 4/4] doc: rockchip: Document SPI flash program steps Jagan Teki
[PATCH v3 1/4] Makefile: Drop to handle rkspi image type Jagan Teki
[PATCH v3 0/6] riscv: sifive/fu540: SPI boot Jagan Teki
[PATCH v3 1/6] sifive: fu540: Add runtime boot mode detection Jagan Teki
[PATCH v3 2/6] sifive: fu540: Add Booting from SPI Jagan Teki
[PATCH v3 3/6] env: Enable SPI flash env for SiFive FU540 Jagan Teki
[PATCH v3 4/6] sifive: fu540: Mark the default env as SPI flash Jagan Teki
[PATCH v3 5/6] sifive: fu540: Add boot flash script offset, size Jagan Teki
[PATCH v3 6/6] sifive: fu540: Enable SF distro bootcmd Jagan Teki
[PATCH] nvme: Invalidate dcache before submitting admin cmd Jagan Teki
[PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN Jagan Teki
[PATCH v2 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN Jagan Teki
[PATCH] rk3399: Add BOOTENV_SF command Jagan Teki
[PATCH v4 0/4] rockchip: rk3399: Add SPI boot Jagan Teki
[PATCH v4 1/4] Makefile: Drop to handle rkspi image type Jagan Teki
[PATCH v4 2/4] roc-rk3399-pc: Mark default env from SPI Jagan Teki
[PATCH v4 3/4] roc-rk3399-pc: Add SPI boot Jagan Teki
[PATCH v4 4/4] doc: rockchip: Document SPI flash program steps Jagan Teki
[PATCH v3 0/5] roc-rk3399-pc: Custom SPL init Jagan Teki
[PATCH v3 1/5] rk3399: spl: Add rk_spl_board_init as __weak Jagan Teki
[PATCH v3 2/5] rk3399: spl: Print SPL banner after relocation Jagan Teki
[PATCH v3 3/5] roc-rk3399-pc: Move leds setup in SPL Jagan Teki
[PATCH v3 4/5] rockchip: Separate the reset cause from display cpuinfo Jagan Teki
[PATCH v3 5/5] roc-rk3399-pc: Set LED only during POR and pwr_key=y Jagan Teki
[PATCH v2] mmc: sdhci: Fix HISPD bit handling Jagan Teki
[PATCH 1/3] rock-pi-4: Enable USB3 Host Jagan Teki
[PATCH 2/3] rock-pi-4: Enable PCI/NVME Jagan Teki
[PATCH 3/3] roc-rk3399-pc: Enable USB Gadget Jagan Teki
[PATCH 0/4] rockchip: rk3399pro: Add Add Rock Pi N10 support Jagan Teki
[PATCH 1/4] arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi Jagan Teki
[PATCH 2/4] arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM Jagan Teki
[PATCH 3/4] ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier Jagan Teki
[PATCH 4/4] arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support Jagan Teki
[PATCH v3] mmc: sdhci: Fix HISPD bit handling Jagan Teki
[PATCH v2] mmc: sdhci: Fix HISPD bit handling Jagan Teki
[PATCH 6/9] spi: mxs: Drop nondm code Jagan Teki
[PATCH 7/9] spi: mxs: Code cleanup Jagan Teki
[PATCH 8/9] spi: Zap SOFT_SPI (non-dm) Jagan Teki
[PATCH 1/3] spi: atmel: Drop CONFIG_SYS_SPI_WRITE_TOUT Jagan Teki
[PATCH 2/3] spi: atmel: Remove nondm code Jagan Teki
[PATCH 3/3] spi: atmel: Drop atmel_spi.h Jagan Teki
[PATCH 4/9] ks2_evm: Switch to DM_SPL, SPL_OF_CONTROL Jagan Teki
[PATCH 5/9] spi: davinci: Drop non-dm code Jagan Teki
[PATCH v2 01/23] configs: igep00x0: Enable DM_SPI Jagan Teki
[PATCH v2 02/23] am335x: sl50: Enable DM_SPI Jagan Teki
[PATCH] Correct sun8i-v3s SRAM size Jagan Teki
[PATCH v3 0/6] riscv: sifive/fu540: SPI boot Jagan Teki
Pull request: u-boot-spi/master Jagan Teki
[PATCH 2/2] omap4: panda: convert to device model Jagan Teki
[PATCH 1/2] rock-pi-4: Enable USB Gadget Jagan Teki
[PATCH] roc-rk3399-pc: Update ENV offset, size Jagan Teki
[PATCH 2/2] rock-pi-4: Enable HDMI output Jagan Teki
[PATCH v3] mmc: sdhci: Fix HISPD bit handling Jagan Teki
[PATCH v2 00/10] spi: dm-conversion (part2) Jagan Teki
[PATCH v2 01/10] powerpc: Remove configs/B4420QDS_NAND_defconfig board Jagan Teki
[PATCH v2 02/10] powerpc: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board Jagan Teki
[PATCH v2 03/10] powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board Jagan Teki
[PATCH v2 04/10] powerpc: Remove configs/C29XPCIE_NAND_defconfig board Jagan Teki
[PATCH v2 05/10] powerpc: Remove configs/MPC8536DS_36BIT_defconfig board Jagan Teki
[PATCH v2 06/10] powerpc: Remove P1022DS_36BIT_NAND_defconfig board Jagan Teki
[PATCH v2 07/10] powerpc: Remove T1024QDS_DDR4_SECURE_BOOT_defconfig board Jagan Teki
[PATCH v2 08/10] powerpc: Remove T1040QDS_DDR4_defconfig board Jagan Teki
[PATCH v2 09/10] powerpc: Remove T4160QDS_NAND_defconfig board Jagan Teki
[PATCH v2 10/10] powerpc: Remove TWR-P1025_defconfig board Jagan Teki
[PATCHv3 00/36] spi: fsl-espi: Convert eSPI driver to DM Jagan Teki
[PATCHv3 01/36] dm: spi: Convert Freescale ESPI driver to driver model Jagan Teki
[PATCH 00/16] spi: dm-conversion (part3) Jagan Teki
[PATCH 01/16] cl-som-imx7: Switch to DM_SPI/DM_SPI_FLASH Jagan Teki
[PATCH 02/16] cm_fx6: Switch to full DM-aware Jagan Teki
[PATCH 03/16] dh_imx6: Switch to full DM-aware Jagan Teki
[PATCH 04/16] arm: Remove mx51evk board Jagan Teki
[PATCH 05/16] arm: Remove ts4800 board Jagan Teki
[PATCH 06/16] arm: Remove tqma6s_wru4_mmc_defconfig Jagan Teki
[PATCH 07/16] arm: Remove pfla02 board Jagan Teki
[PATCH 08/16] arm: Remove pcm058 board Jagan Teki
[PATCH 09/16] arm: Remove riotboard board Jagan Teki
[PATCH 10/16] arm: Remove zc5202/zc5601 board Jagan Teki
[PATCH 11/16] arm: Remove cgtqmx6eval board Jagan Teki
[PATCH 12/16] arm: Remove ot1200 board Jagan Teki
[PATCH 13/16] arm: Remove dms-ba16 board Jagan Teki
[PATCH 14/16] arm: Remove configs/mx35pdk_defconfig board Jagan Teki
[PATCH 15/16] arm: Remove flea3_defconfig board Jagan Teki
[PATCH 16/16] arm: Remove mx31pdk_defconfig board Jagan Teki
[PATCH v2 03/23] am335x: baltos: Enable DM_SPI Jagan Teki
[PATCH v2 04/23] am335x: igep003x: Enable DM_SPI Jagan Teki
[PATCH v2 05/23] siemens: draco: Enable DM_SPI, DM_SPI_FLASH Jagan Teki
[PATCH v2 06/23] siemens: pxm2: Enable DM_SPI, DM_SPI_FLASH Jagan Teki
[PATCH v2 07/23] siemens: rut: Enable DM_SPI, DM_SPI_FLASH Jagan Teki
[PATCH v2 08/23] compulab: Drop cm_t54 Jagan Teki
[PATCH v2 09/23] compulab: Drop cm_t35 Jagan Teki
[PATCH v2 10/23] overo: Drop omap3 overo Jagan Teki
[PATCH v2 12/23] logicpd: Drop omap3 zoom1 Jagan Teki
[PATCH v2 13/23] quipos: Drop omap3 cairo Jagan Teki
[PATCH v2 14/23] gumstix: Drop duovero Jagan Teki
[PATCH v2 16/23] ti: Drop sdp4430 board Jagan Teki
[PATCH v2 15/23] ti: Drop panda board Jagan Teki
[PATCH v2 17/23] ti: Drop omap5 uevm Jagan Teki
[PATCH v2 18/23] birdland: Drop bav335x Jagan Teki
[PATCH v2 19/23] gumstix: Drop pepper Jagan Teki
[PATCH v2 21/23] silica: Drop pengwyn Jagan Teki
[PATCH v2 15/23] ti: Drop panda board Jagan Teki
[PATCH v2 15/23] ti: Drop panda board Jagan Teki
[PATCH] video: sunxi_display: Convert to DM_VIDEO Jagan Teki
[PATCH] splash: Fix build warning on 64 bits CPU Jagan Teki
[PATCH] video: bmp: Support 8bits BMP to 24/32 bits display Jagan Teki
[PATCH] video: vidconsole: avoid multiple lines overwrite logo Jagan Teki
[PATCH v2 0/3] video: sunxi: Convert DM_VIDEO Jagan Teki
[PATCH v2 1/3] logos: Add sunxi logo Jagan Teki
[PATCH v2 2/3] sunxi: Enable splash screen support Jagan Teki
[PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO Jagan Teki
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Jagan Teki
[PATCH v2 1/6] rock-pi-4: Enable USB3 Host Jagan Teki
[PATCH v2 2/6] rock-pi-4: Enable PCI/NVME Jagan Teki
[PATCH v2 3/6] rock-pi-4: Enable USB Gadget Jagan Teki
[PATCH v2 4/6] rock-pi-4: Enable HDMI output Jagan Teki
[PATCH v2 5/6] roc-rk3399-pc: Enable USB Gadget Jagan Teki
[PATCH v2 6/6] roc-rk3399-pc: Update ENV offset, size Jagan Teki
[PATCH v4 0/5] roc-rk3399-pc: Custom SPL init Jagan Teki
[PATCH v4 1/5] rockchip: spl: Add spl_board_init Jagan Teki
[PATCH v4 2/5] rk3399: spl: Print SPL banner after relocation Jagan Teki
[PATCH v4 3/5] roc-rk3399-pc: Move leds setup in SPL Jagan Teki
[PATCH v4 4/5] rockchip: Separate the reset cause from display cpuinfo Jagan Teki
[PATCH v4 5/5] roc-rk3399-pc: Set LED only during POR and pwr_key=y Jagan Teki
[PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO Jagan Teki
[PATCH 0/3] rockchip: Add Radxa Rock Pi N8 support Jagan Teki
[PATCH 1/3] ARM: dts: rockchip: radxa-dalang: Update sdmmc properties Jagan Teki
[PATCH 2/3] ARM: dts: rockchip: Add VMARC RK3288 SOM initial support Jagan Teki
[PATCH 3/3] ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support Jagan Teki
[PATCH v2 00/10] spi: dm-conversion (part2) Jagan Teki
[PATCH v2 03/23] am335x: baltos: Enable DM_SPI Jagan Teki
[PATCH v3 0/4] spi: kirkwood: dm-conversion (part4) Jagan Teki
[PATCH v3 1/4] spi: kirkwood: Drop nondm code Jagan Teki
[PATCH v3 2/4] arm: Remove d2net_v2 board Jagan Teki
[PATCH v3 3/4] db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASH Jagan Teki
[PATCH v3 4/4] arm: Remove netspace_v2 board Jagan Teki
Pull request (-next): u-boot-spi/master Jagan Teki
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Jagan Teki
[PATCH v4] mmc: sdhci: Fix HISPD bit handling Jagan Teki
[PATCH] video: rk_vop: Fix wrong bpix for frame buffer Jagan Teki
[PATCH] rk3399: Add BOOTENV_SF command Jagan Teki
[PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci Jagan Teki
[PATCH] video: rk_vop: Fix wrong bpix for frame buffer Jagan Teki
[PATCH] video: rockchip: fix HDMI 4K resolution Jagan Teki
[PATCH v2 1/5] dt-bindings: prci: add indexes for reset signals available in prci Jagan Teki
[PATCH 1/1] spl: fix ext4fs_mount return code handling Heiko Thiery
[PATCH 1/1] spl: fix ext4fs_mount return code handling Heiko Thiery
[PATCH v2 1/1] spl: fix ext4fs_mount return code handling Heiko Thiery
[PATCH] tpm2: tis_spi: add linux compatible fallback string Bruno Thomsen
[PATCH v2] tpm2: tis_spi: add linux compatible fallback string Bruno Thomsen
[PATCH] mmc: Parse new binding for eMMC fixed driver type Shunsuke Tokumoto
[PATCH v4 0/2] Calculate SDRAM size for Actions OWL SoCs Amit Tomer
[PATCH 3/6] board: puma: reorganize devicetrees to actually work and match upstream Philipp Tomsich
[PATCH 5/6] board: puma: allow building with TPL as well Philipp Tomsich
[PATCH 4/6] board: puma: fix indentation of misc_init_r Philipp Tomsich
[PATCH 2/6] board: puma: fix indentation for -u-boot.dtsi Philipp Tomsich
[PATCH 1/6] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin Philipp Tomsich
[PATCH 6/6] board: puma: remove separate fit generator Philipp Tomsich
[PATCH v2 8/8] rockchip: puma: enable new usb config options Philipp Tomsich
[PATCH v3 1/4] Makefile: Drop to handle rkspi image type Philipp Tomsich
[PATCH v3 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator Philipp Tomsich
[PATCH v3 7/8] rockchip: puma: drop special handling of usb host regulator Philipp Tomsich
[PATCH 1/2] net: phy: mscc: make clock-output configurable on vsc85xx Philipp Tomsich
[PATCH 2/2] net: phy: mscc: sync rx/tx delay settings with Linux on vsc85xx Philipp Tomsich
[PATCH V2] nvme: Invalidate dcache before submitting admin cmd Michael Trimarchi
[PATCH v3 3/4] spl: fit: nand: fix fit loading in case of bad blocks Michael Nazzareno Trimarchi
[PATCH] nvme: Invalidate dcache before submitting admin cmd Michael Nazzareno Trimarchi
[PATCH] nvme: Invalidate dcache before submitting admin cmd Michael Nazzareno Trimarchi
[PATCH] dm: core: Correct comment on uclass_id_foreach_dev() Michael Nazzareno Trimarchi
Can't access mmc #0 on mt7623 when booted from external SD Michael Nazzareno Trimarchi
Can't access mmc #0 on mt7623 when booted from external SD Michael Nazzareno Trimarchi
Can't access mmc #0 on mt7623 when booted from external SD Michael Nazzareno Trimarchi
[PATCH v2 3/3] video: sunxi_display: Convert to DM_VIDEO Michael Nazzareno Trimarchi
Can't access mmc #0 on mt7623 when booted from external SD Michael Nazzareno Trimarchi
[PATCH] cmd: mmc: Add mmc reg read command for reading card registers Michael Nazzareno Trimarchi
[PATCH] cmd: mmc: Cache-align extcsd read target Michael Nazzareno Trimarchi
[PATCH] cmd: mmc: Add mmc reg read command for reading card registers Michael Nazzareno Trimarchi
[PATCH v3 15/15] MAINTAINERS: update maintainers for broadcom ns3 platform Peter Tyser
[PATCH 0/2] omap4: sdp: convert to device model Peter Ujfalusi
[PATCH 1/2] omap4: Copy device tree from Linux 5.7.y for SDP4430 Peter Ujfalusi
[PATCH 2/2] omap4: sdp: convert to device model Peter Ujfalusi
[PATCH 0/2] omap4: sdp: convert to device model Peter Ujfalusi
[PATCH 2/2] omap4: sdp: convert to device model Peter Ujfalusi
[PATCH 2/2] omap4: sdp: convert to device model Peter Ujfalusi
[PATCH v3] spl: allow board_spl_fit_post_load() to fail Marek Vasut
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Marek Vasut
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Marek Vasut
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Marek Vasut
[PATCH u-boot] eth/r8152: update the firmware Marek Vasut
[PATCH u-boot] eth/r8152: update the firmware Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH u-boot] eth/r8152: update the firmware Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH] env: Add option to only ever append environment Marek Vasut
[PATCH 1/6] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set Marek Vasut
[PATCH 2/6] env: Add H_DEFAULT flag Marek Vasut
[PATCH 3/6] env: Fix invalid env handling in env_init() Marek Vasut
[PATCH 4/6] env: nowhere: Implement .load callback Marek Vasut
[PATCH 5/6] env: Add option to only ever append environment Marek Vasut
[PATCH 6/6] env: Add support for explicit write access list Marek Vasut
[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware Marek Vasut
[PATCH] usb: musb-new: Fix unused function warnings from clang Marek Vasut
[PATCH u-boot] eth/r8152: update the firmware Marek Vasut
[PATCH] usb: eth: lan78xx: Fix logic in lan78xx_read_otp() to avoid a warning Marek Vasut
[PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns Marek Vasut
[PATCH] arm: socfpga: gen5: Enable cache driver in SPL Marek Vasut
[PATCH u-boot v2] eth/r8152: update the firmware Marek Vasut
[PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t Marek Vasut
[PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t Marek Vasut
[PATCH 3/6] env: Fix invalid env handling in env_init() Marek Vasut
[PATCH 6/6] env: Add support for explicit write access list Marek Vasut
[PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t Marek Vasut
[PATCH] clk: renesas: Synchronize Gen2 MSTP teardown tables Marek Vasut
[PATCH 3/6] env: Fix invalid env handling in env_init() Marek Vasut
[RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional Marek Vasut
[RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional Marek Vasut
[PATCH 3/6] env: Fix invalid env handling in env_init() Marek Vasut
[PATCH 3/6] env: Fix invalid env handling in env_init() Marek Vasut
[PATCH] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns Marek Vasut
[PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx Marek Vasut
[PATCH u-boot 2/4] eth/r8152: reset PHY after setting it Marek Vasut
[PATCH u-boot 3/4] eth/r8152: modify rtl_clear_bp function Marek Vasut
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Marek Vasut
[PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx Marek Vasut
[PATCH u-boot 2/4] eth/r8152: reset PHY after setting it Marek Vasut
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Marek Vasut
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Marek Vasut
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Marek Vasut
[PATCH] arm: dts: socfpga: l2c-310 full line of zeros error @kernel boot Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH v2] common: fdt: Remove additional 4k space for fdt allocation Marek Vasut
[PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration Marek Vasut
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Marek Vasut
[PATCH] arm: socfpga: add board support for ic-automation moritz III Marek Vasut
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Marek Vasut
[PATCH v4 5/5] usb: xhci-pci: Add reset controller support Marek Vasut
[PATCH v2] arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns Marek Vasut
[PATCH] ARM: rmobile: Increase PHY auto-negotiation timeout to 20s Marek Vasut
[PATCH 2/2] [RFC] clk: stm32mp1: Handle SoC speed grade configs Marek Vasut
[PULL] u-boot-socfpga/master Marek Vasut
[PULL] u-boot-usb/master Marek Vasut
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Marek Vasut
[RESEND PATCH] usb: max3420: add the gadget driver Marek Vasut
[PATCH u-boot v2 1/4] eth/r8152: reset bmu after disabling Tx/Rx Marek Vasut
[PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM Marek Vasut
GPIO request failures for Renesas rcar-gen3 Marek Vasut
GPIO request failures for Renesas rcar-gen3 Marek Vasut
GPIO request failures for Renesas rcar-gen3 Marek Vasut
[PATCH 4/5] pinctrl: renesas: Add R8A774A1 PFC tables Marek Vasut
[PATCH] ARM: dts: stm32: Reinstate card detect behavior on DHSOM Marek Vasut
[PATCH V2 5/5] mmc: renesas-sdhi: Enable support for R8A774A1 Marek Vasut
[PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables Marek Vasut
[PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables Marek Vasut
[PATCH 6/6] ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit Marek Vasut
[PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables Marek Vasut
[PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables Marek Vasut
[PATCH V2 4/5] pinctrl: renesas: Enable R8A774A1 PFC tables Marek Vasut
[PATCH] cmd: mmc: Cache-align extcsd read target Marek Vasut
[PATCH] cmd: mmc: Add mmc reg read command for reading card registers Marek Vasut
[PULL] u-boot-sh/master Marek Vasut
[PULL] u-boot-sh/net Marek Vasut
[PATCH 1/4] net: dc2114x: Use PCI_DEVICE() to define PCI device compat list Marek Vasut
[PATCH 2/4] net: dc2114x: Support all DC2114x Marek Vasut
[PATCH 3/4] net: dc2114x: Add Kconfig entries Marek Vasut
[PATCH 4/4] net: dc2114x: Drop update_srom() Marek Vasut
[PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables Marek Vasut
[PATCH v5 4/4] usb: xhci: Add reset controller support Marek Vasut
[PATCH] cmd: mmc: Add mmc reg read command for reading card registers Marek Vasut
[RESEND PATCH] usb: max3420: add the gadget driver Marek Vasut
[PATCH v5 4/4] usb: xhci: Add reset controller support Marek Vasut
[PATCH 1/7] usb: ehci-mx6: Add powerup_fixup implementation Marek Vasut
[PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support Marek Vasut
[PATCH 3/7] usb: ehci-mx6: Turn on the power domain of USB PHY Marek Vasut
[PATCH 4/7] usb: ehci-mx6: Update driver to support i.MX8MM Marek Vasut
[PATCH 5/7] usb: ehci-mx6: fix controller index for imx8m and imx8 Marek Vasut
[PATCH 2/7] usb: ehci-mx6: Add i.MX8 OTG controller support Marek Vasut
[PATCH] env: Add option to only ever append environment Rasmus Villemoes
[PATCH v2 06/10] rtc: add rtc command Rasmus Villemoes
[PATCH v2 10/10] test: dm: rtc: add tests of rtc shell command Rasmus Villemoes
[PATCH] env: Add option to only ever append environment Rasmus Villemoes
[PATCH 0/3] watchdog: honour hw_margin_ms property Rasmus Villemoes
[PATCH v2 06/10] rtc: add rtc command Rasmus Villemoes
[PATCH 0/3] watchdog: honour hw_margin_ms property Rasmus Villemoes
[PATCH v2 00/10] new rtc methods, rtc command, and tests Rasmus Villemoes
[PATCH v3 00/10] new rtc methods, rtc command, and tests Rasmus Villemoes
[PATCH v3 01/10] rtc: add dm_rtc_read helper and ->read method Rasmus Villemoes
[PATCH v3 02/10] rtc: add dm_rtc_write() helper Rasmus Villemoes
[PATCH v3 03/10] rtc: fall back to ->{read, write} if ->{read, write}8 are not provided Rasmus Villemoes
[PATCH v3 04/10] rtc: pcf2127: provide ->read method Rasmus Villemoes
[PATCH v3 05/10] rtc: pcf2127: provide ->write method Rasmus Villemoes
[PATCH v3 06/10] rtc: add rtc command Rasmus Villemoes
[PATCH v3 07/10] rtc: sandbox-rtc: fix set method Rasmus Villemoes
[PATCH v3 08/10] rtc: i2c_rtc_emul: catch any write to the "reset" register Rasmus Villemoes
[PATCH v3 09/10] test: dm: rtc: add test of dm_rtc_read, dm_rtc_write Rasmus Villemoes
[PATCH v3 10/10] test: dm: rtc: add tests of rtc shell command Rasmus Villemoes
[PATCH v2 00/10] new rtc methods, rtc command, and tests Rasmus Villemoes
[PATCH 0/3] watchdog: honour hw_margin_ms property Rasmus Villemoes
[PATCH] powerpc: reduce number of WATCHDOG_RESET calls from flush_cache Rasmus Villemoes
[RFC PATCH] allow choosing -Os/-O2 separately for SPL and TPL Rasmus Villemoes
[PATCH] lz4: fix decompressor on big-endian powerpc Rasmus Villemoes
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Rasmus Villemoes
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Rasmus Villemoes
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Rasmus Villemoes
[RFC PATCH] watchdog: base rate-limiting on get_ticks() rather than get_timer() Rasmus Villemoes
[PATCH] lz4: fix decompressor on big-endian powerpc Rasmus Villemoes
[PATCH v2] lz4: fix decompressor on big-endian powerpc Rasmus Villemoes
[PATCH] image: Add support for ZSTD decompression Rasmus Villemoes
[RFC PATCH 0/4] CONFIG_IS_ENABLED magic Rasmus Villemoes
[RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC Rasmus Villemoes
[RFC PATCH 2/4] linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }* Rasmus Villemoes
[RFC PATCH 3/4] linux/kconfig.h: remove unused helper macros Rasmus Villemoes
[RFC PATCH 4/4] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED Rasmus Villemoes
[RFC PATCH 1/4] common/image.c: image_decomp: put IH_COMP_XXX cases inside ifndef USE_HOSTCC Rasmus Villemoes
[PATCH] [RFC] tools: fitmount: fuse mount fit images Rasmus Villemoes
[PATCH 1/2] vboot: add support for multiple required keys Rasmus Villemoes
[PATCH v2 15/23] ti: Drop panda board Lokesh Vutla
[PATCH v2 17/23] ti: Drop omap5 uevm Lokesh Vutla
[PATCH] board: ti: common: Fix pointer-bool-conversion warnings Lokesh Vutla
[PATCH] gpio: omap_gpio: Fix unused function warning in non-DM case Lokesh Vutla
[PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg() Lokesh Vutla
[PATCH 0/2] omap4: panda: convert to device model Lokesh Vutla
[PATCHv3 0/6] omap4/omap5: convert to DM model Lokesh Vutla
[PATCH V2] ARM: omap3_logic boards: Convert to DM_ETH Lokesh Vutla
[PATCH] board: ti: am654: Disable SA2UL node for HS devices Lokesh Vutla
[PATCH v2 1/2] tools: k3_gen_x509_cert: Allow selecting early JTAG debug value Lokesh Vutla
[PATCH] board: ti: common: Fix pointer-bool-conversion warnings Lokesh Vutla
[PATCH] gpio: omap_gpio: Fix unused function warning in non-DM case Lokesh Vutla
[PATCH] mmc: omap_hsmmc: Add guards around omap_hsmmc_get_cfg() Lokesh Vutla
[PATCH] net: cpsw: Add __maybe_unused to generated inlines Lokesh Vutla
[u-boot PATCH] phy: omap-usb2-phy: disable phy charger detect Lokesh Vutla
[PATCH] Nokia RX-51: Add link for u-boot-gen-combined script to README file Lokesh Vutla
[PATCH] Nokia RX-51: Fix checking if serial console was enabled Lokesh Vutla
[PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL Lokesh Vutla
[PATCH 1/2] board: ti: am57xx: use GPIO_TO_PIN() to define GPIO number Lokesh Vutla
[GIT PULL] TI changes for v2020.10 next Lokesh Vutla
[GIT PULL] TI changes for v2020.10 next Lokesh Vutla
[PATCH v2 1/3] watchdog: Add support for K3 RTI watchdog Lokesh Vutla
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Lokesh Vutla
[PATCH] arm: k3: Consolidate and silence k3_fit_atf.sh call Lokesh Vutla
[PATCH] arm: k3: Consolidate and silence k3_fit_atf.sh call Lokesh Vutla
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Lokesh Vutla
[PATCH v2 2/3] watchdog: rti_wdt: Add support for loading firmware Lokesh Vutla
[PATCH v2 00/13] armv8: layerscape: spin table relocation fixes and cleanups Michael Walle
[PATCH v2 01/13] armv8: layerscape: fix spin-table support Michael Walle
[PATCH v2 02/13] armv8: layerscape: pretty print info about SMP cores Michael Walle
[PATCH v2 03/13] armv8: layerscape: properly use CPU_RELEASE_ADDR Michael Walle
[PATCH v2 04/13] armv8: layerscape: move spin table into own module Michael Walle
[PATCH v2 05/13] armv8: layerscape: load function pointer using ADR Michael Walle
[PATCH v2 06/13] armv8: layerscape: fix alignment for spin table Michael Walle
[PATCH v2 07/13] armv8: layerscape: remove determine_mp_bootpg() Michael Walle
[PATCH v2 08/13] armv8: layerscape: simplify get_spin_tbl_addr() calls Michael Walle
[PATCH v2 09/13] armv8: layerscape: make wake_secondary_core_n() static Michael Walle
[PATCH v2 10/13] armv8: layerscape: drop first .ltorg directive in spintable.S Michael Walle
[PATCH v2 11/13] armv8: layerscape: clean exported symbols in spintable.S Michael Walle
[PATCH v2 12/13] armv8: layerscape: relocate spin table if EFI_LOADER is enabled Michael Walle
[PATCH v2 13/13] armv8: layerscape: rework spin table Michael Walle
[PATCH v7 0/2] dm: uclass: don't assign aliased seq numbers Michael Walle
[PATCH v7 1/3] usb: provide a device tree node to USB devices Michael Walle
[PATCH v7 2/3] dm: core: fix dev_read_alias_highest_id() without libfdt Michael Walle
[PATCH v7 3/3] dm: uclass: don't assign aliased seq numbers Michael Walle
[PATCH v3 0/2] Basic Kontron SMARC-sAL28 board support Michael Walle
[PATCH] armv8: layerscape: don't remove crypto node on LS1028A Michael Walle
[PATCH v2 12/13] armv8: layerscape: relocate spin table if EFI_LOADER is enabled Michael Walle
[PATCH 0/4] crypto/fsl: add RNG support Michael Walle
[PATCH 1/4] crypto/fsl: make SEC%u status line consistent Michael Walle
[PATCH 2/4] crypto/fsl: export caam_get_era() Michael Walle
[PATCH 3/4] crypto/fsl: support newer SEC modules Michael Walle
[PATCH 4/4] crypto/fsl: add RNG support Michael Walle
[PATCH 4/4] crypto/fsl: add RNG support Michael Walle
[PATCH] armv8: layerscape: don't remove crypto node on LS1028A Michael Walle
[PATCH 4/4] crypto/fsl: add RNG support Michael Walle
[PATCH 4/4] crypto/fsl: add RNG support Michael Walle
[PATCH 4/4] crypto/fsl: add RNG support Michael Walle
[PATCH v2 0/6] crypto/fsl: add RNG support Michael Walle
[PATCH v2 1/6] crypto/fsl: make SEC%u status line consistent Michael Walle
[PATCH v2 2/6] crypto/fsl: export caam_get_era() Michael Walle
[PATCH v2 3/6] crypto/fsl: support newer SEC modules Michael Walle
[PATCH v2 4/6] crypto/fsl: don't regenerate secure keys Michael Walle
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Michael Walle
[PATCH v2 6/6] crypto/fsl: add RNG support Michael Walle
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Michael Walle
[PATCH] crypto/fsl: fix unaligned access Michael Walle
[PATCH 4/4] crypto/fsl: add RNG support Michael Walle
U-Boot atheros PHY support and cubox ethernet Michael Walle
U-Boot atheros PHY support and cubox ethernet Michael Walle
[PATCH v2 4/6] crypto/fsl: don't regenerate secure keys Michael Walle
[PATCH] phy: atheros: Fix the "qca,clk-out-frequency" example Michael Walle
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Michael Walle
mx6sabresd: Trying to use qca,clk-out-frequency Michael Walle
[PATCH v2 6/6] crypto/fsl: add RNG support Michael Walle
mx6sabresd: Trying to use qca,clk-out-frequency Michael Walle
[PATCH] phy: atheros: ar8035: Fix clock output calculation Michael Walle
[PATCH v3 0/2] Basic Kontron SMARC-sAL28 board support Michael Walle
[PATCH v2 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Michael Walle
[PATCH v3 0/6] crypto/fsl: add RNG support Michael Walle
[PATCH v3 1/6] crypto/fsl: make SEC%u status line consistent Michael Walle
[PATCH v3 2/6] crypto/fsl: export caam_get_era() Michael Walle
[PATCH v3 3/6] crypto/fsl: support newer SEC modules Michael Walle
[PATCH v3 4/6] crypto/fsl: don't regenerate secure keys Michael Walle
[PATCH v3 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Michael Walle
[PATCH v3 6/6] crypto/fsl: add RNG support Michael Walle
[PATCH v3 0/6] crypto/fsl: add RNG support Michael Walle
[PATCH v3 0/6] crypto/fsl: add RNG support Michael Walle
[PATCH v3 0/6] crypto/fsl: add RNG support Michael Walle
[PATCH v4 0/6] crypto/fsl: add RNG support Michael Walle
[PATCH v4 1/6] crypto/fsl: make SEC%u status line consistent Michael Walle
[PATCH v4 2/6] crypto/fsl: export caam_get_era() Michael Walle
[PATCH v4 3/6] crypto/fsl: support newer SEC modules Michael Walle
[PATCH v4 4/6] crypto/fsl: don't regenerate secure keys Michael Walle
[PATCH v4 5/6] crypto/fsl: instantiate the RNG with prediciton resistance Michael Walle
[PATCH v4 6/6] crypto/fsl: add RNG support Michael Walle
[PATCH 1/7] arm: vexpress64: Fix counter frequency Linus Walleij
[PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address Linus Walleij
[PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address Linus Walleij
[PATCH 4/7] arm: juno: Enable DM_ETH Linus Walleij
[PATCH 5/7] sata_sil: Enable DM_PCI operation Linus Walleij
[PATCH 6/7] arm: juno: Enable PCI Linus Walleij
[PATCH 7/7] arm: juno: Enable SATA controller Linus Walleij
Antwort: [PATCH v2 20/35] acpi: Support writing a GPIO Wolfgang Wallner
[PATCH v2 21/35] acpi: Support copying properties from device tree to ACPI Wolfgang Wallner
[PATCH v2 22/35] acpi: Add support for various misc ACPI opcodes Wolfgang Wallner
Antwort: [PATCH v2 23/35] acpi: Add support for writing a Power Resource Wolfgang Wallner
[PATCH v2 24/35] acpi: Add support for writing a GPIO power sequence Wolfgang Wallner
[PATCH v2 25/35] acpi: Add support for a generic power sequence Wolfgang Wallner
[PATCH v2 27/35] x86: acpi: Move MADT down a bit Wolfgang Wallner
[PATCH v2 29/35] acpi: Support ordering SSDT data by device Wolfgang Wallner
[PATCH v2 28/35] acpi: Record the items added to SSDT Wolfgang Wallner
[PATCH v2 30/35] x86: Allow devices to write an SSDT Wolfgang Wallner
[PATCH v2 33/35] pci: Avoid a crash in device_is_on_pci_bus() Wolfgang Wallner
[PATCH v2 31/35] acpi: Add support for DSDT generation Wolfgang Wallner
[PATCH v2 32/35] x86: Allow devices to write to DSDT Wolfgang Wallner
[PATCH v2 35/35] acpi: Add an acpi split command Wolfgang Wallner
[PATCH v2 34/35] dm: acpi: Enhance acpi_get_name() Wolfgang Wallner
[PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B) Wolfgang Wallner
[PATCH v2 05/35] acpi: Support generation of ACPI code Wolfgang Wallner
[PATCH v2 05/35] acpi: Support generation of ACPI code Wolfgang Wallner
[PATCH v2 06/35] acpi: Support generation of interrupt descriptor Wolfgang Wallner
[PATCH v2 12/35] acpi: Support generation of SPI descriptor Wolfgang Wallner
[PATCH 01/22] x86: mp_init: Switch to livetree Wolfgang Wallner
[PATCH 02/22] x86: Move MP code into mp_init Wolfgang Wallner
[PATCH 03/22] x86: mp_init: Avoid declarations in header files Wolfgang Wallner
[PATCH 04/22] x86: mp_init: Switch parameter names in start_aps() Wolfgang Wallner
[PATCH 05/22] x86: mp_init: Drop the num_cpus static variable Wolfgang Wallner
[PATCH 06/22] x86: mtrr: Fix 'ensable' typo Wolfgang Wallner
[PATCH 07/22] x86: mp_init: Set up the CPU numbers at the start Wolfgang Wallner
[PATCH 08/22] x86: mp_init: Adjust bsp_init() to return more information Wolfgang Wallner
[PATCH 09/22] x86: cpu: Remove unnecessary #ifdefs Wolfgang Wallner
[PATCH 10/22] x86: mp: Support APs waiting for instructions Wolfgang Wallner
[PATCH 11/22] global_data: Add a generic global_data flag for SMP state Wolfgang Wallner
[PATCH 12/22] x86: Set the SMP flag when MP init is complete Wolfgang Wallner
[PATCH 13/22] x86: mp: Allow running functions on multiple CPUs Wolfgang Wallner
[PATCH 14/22] x86: mp: Park CPUs before running the OS Wolfgang Wallner
[PATCH 15/22] x86: mp: Add iterators for CPUs Wolfgang Wallner
[PATCH 16/22] x86: mtrr: Use MP calls to list the MTRRs Wolfgang Wallner
[PATCH 17/22] x86: mtrr: Update MTRRs on all CPUs Wolfgang Wallner
[PATCH 18/22] x86: mtrr: Add support for writing to MTRRs on any CPU Wolfgang Wallner
[PATCH 19/22] x86: mtrr: Update the command to use the new mtrr calls Wolfgang Wallner
[PATCH 20/22] x86: mtrr: Restructure so command execution is in one place Wolfgang Wallner
[PATCH 21/22] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU Wolfgang Wallner
[PATCH 22/22] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU Wolfgang Wallner
[PATCH v2 04/25] x86: mp_init: Switch parameter names in start_aps() Wolfgang Wallner
[PATCH v2 10/25] x86: mp: Support APs waiting for instructions Wolfgang Wallner
[PATCH v2 13/25] x86: mp: Allow running functions on multiple CPUs Wolfgang Wallner
[PATCH v2 17/25] x86: Don't enable SMP in SPL Wolfgang Wallner
[PATCH v2 18/25] x86: coral: Update the memory map Wolfgang Wallner
[PATCH v2 20/25] x86: mtrr: Add support for writing to MTRRs on any CPU Wolfgang Wallner
[PATCH v2 24/25] x86: mp: Add more comments to the module Wolfgang Wallner
[PATCH v3 05/35] acpi: Support generation of ACPI code Wolfgang Wallner
[PATCH v3 12/35] acpi: Support generation of SPI descriptor Wolfgang Wallner
[PATCH v3 20/35] acpi: Support writing a GPIO Wolfgang Wallner
[PATCH v3 21/35] acpi: Support copying properties from device tree to ACPI Wolfgang Wallner
[PATCH v3 29/35] acpi: Support ordering SSDT data by device Wolfgang Wallner
[PATCH v3 30/35] x86: Allow devices to write an SSDT Wolfgang Wallner
[PATCH v3 32/35] x86: Allow devices to write to DSDT Wolfgang Wallner
[PATCH 6/6] x86: fsp: Support a warning message when DRAM init is slow Wolfgang Wallner
[PATCH v1 29/43] p2sb: Add a method to hide the bus Wolfgang Wallner
[PATCH v1 30/43] x86: apl: Support set_hide() in p2sb driver Wolfgang Wallner
[PATCH v1 31/43] x86: apl: Hide the p2sb on exit from U-Boot Wolfgang Wallner
[PATCH v1 09/43] acpi: Support generation of a scope Wolfgang Wallner
[PATCH v1 10/43] acpi: Support generation of a generic register Wolfgang Wallner
[PATCH v1 13/43] acpi: Support generation of a device Wolfgang Wallner
[PATCH v1 14/43] acpi: Support writing named values Wolfgang Wallner
[PATCH v1 21/43] x86: pinctrl: Drop the acpi_name member Wolfgang Wallner
[PATCH v1 36/43] x86: apl: Adjust FSP-M code to avoid hard-coded address Wolfgang Wallner
[PATCH v1 04/43] acpi: Allow creating the GNVS to fail Wolfgang Wallner
[PATCH v1 06/43] dm: core: Add a way of overriding the ACPI device path Wolfgang Wallner
[PATCH v1 26/43] i2c: designware_i2c: Add a little more debugging Wolfgang Wallner
[PATCH v1 27/43] i2c: Add log_ret() on error Wolfgang Wallner
[PATCH v1 28/43] i2c: designware_i2c: Support ACPI table generation Wolfgang Wallner
[PATCH v1 32/43] pmc: Move common registers to the header file Wolfgang Wallner
[PATCH v1 35/43] x86: Add debugging to table writing Wolfgang Wallner
[PATCH v1 39/43] x86: Update the comment about booting for FSP2 Wolfgang Wallner
[PATCH v1 42/43] x86: Rename board_final_cleanup() to board_final_init() Wolfgang Wallner
[PATCH v1 07/43] dm: acpi: Add support for the NHLT table Wolfgang Wallner
[PATCH v1 08/43] acpi: Export functions to write sized values Wolfgang Wallner
[PATCH v1 11/43] acpi: mmc: Generate ACPI info for the PCI SD Card Wolfgang Wallner
[PATCH v1 12/43] x86: Add bindings for NHLT Wolfgang Wallner
[PATCH v1 17/43] x86: pinctrl: Add a way to get the pinctrl reg address Wolfgang Wallner
[PATCH u-boot] eth/r8152: update the firmware Hayes Wang
[PATCH u-boot] eth/r8152: update the firmware Hayes Wang
[PATCH u-boot] eth/r8152: update the firmware Hayes Wang
[PATCH u-boot] eth/r8152: update the firmware Hayes Wang
[PATCH u-boot v2] eth/r8152: update the firmware Hayes Wang
[PATCH u-boot 0/4] r8152: support more chips Hayes Wang
[PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx Hayes Wang
[PATCH u-boot 2/4] eth/r8152: reset PHY after setting it Hayes Wang
[PATCH u-boot 3/4] eth/r8152: modify rtl_clear_bp function Hayes Wang
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Hayes Wang
[PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx Hayes Wang
[PATCH u-boot 2/4] eth/r8152: reset PHY after setting it Hayes Wang
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Hayes Wang
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Hayes Wang
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Hayes Wang
[PATCH u-boot 1/4] eth/r8152: reset bmu after disabling Tx/Rx Hayes Wang
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Hayes Wang
[PATCH u-boot 4/4] eth/r8152: support RTL8153B/RTL8154B Hayes Wang
[PATCH u-boot v2 0/4] r8152: support more chips Hayes Wang
[PATCH u-boot v2 1/4] eth/r8152: reset bmu after disabling Tx/Rx Hayes Wang
[PATCH u-boot v2 2/4] eth/r8152: reset PHY after setting it Hayes Wang
[PATCH u-boot v2 3/4] eth/r8152: modify rtl_clear_bp function Hayes Wang
[PATCH u-boot v2 4/4] eth/r8152: support RTL8153B/RTL8154B Hayes Wang
[PATCH] configs: powerpc: add usb (host) mass storage support Ran Wang
Can't access mmc #0 on mt7623 when booted from external SD Sean Wang
[PATCH] test_sleep.py: make sleep time and margin configurable Stephen Warren
[PATCH] test_sleep.py: make sleep time and margin configurable Stephen Warren
[PATCH] test_sleep.py: make sleep time and margin configurable Stephen Warren
[PATCH v2] common: fdt: Remove additional 4k space for fdt allocation Stephen Warren
[PATCH v2] common: fdt: Remove additional 4k space for fdt allocation Stephen Warren
[PATCH v2] common: fdt: Remove additional 4k space for fdt allocation Stephen Warren
[PATCH v2 29/49] tegra: Drop the unused non-binman code Stephen Warren
[PATCH v4 4/4] test: env: add test for env info sub-command Stephen Warren
[PATCH v4 4/4] test: env: add test for env info sub-command Stephen Warren
[PATCH v2 29/49] tegra: Drop the unused non-binman code Stephen Warren
[PATCH] test_sleep.py: make sleep time and margin configurable Stephen Warren
[PATCH 1/1] gitlab: show skipped Python tests Stephen Warren
[PATCH v3] common: fdt: Remove additional 4k space for fdt allocation Stephen Warren
[RESEND PATCH v5 4/4] test: env: add test for env info sub-command Stephen Warren
[PATCH v2 6/9] test: environment in ext4 Stephen Warren
[PATCH v2 9/9] test: sandbox: add test for erase command Stephen Warren
[PATCH 2/2] ARM: tegra: Enable PSCI support for Tegra210 and Tegra186 Stephen Warren
[PATCH] travis-ci: Update QEMU RISC-V run command Stephen Warren
[PATCH] travis-ci: Update QEMU RISC-V run command Stephen Warren
[RESEND PATCH v5 4/4] test: env: add test for env info sub-command Stephen Warren
[PATCH v2 1/1] travis-ci: Fix "ResourceWarning: unclosed file" Stephen Warren
[PATCHv2 04/31] Convert CONFIG_ARMV7_PSCI et al to Kconfig Tom Warren
[PATCH 1/2] firmware: PSCI: Fix PSCI support for OF live trees Tom Warren
Pull request, u-boot-tegra/master Tom Warren
[PATCH] Fix MMC access on Sabrelite Martyn Welch
[PATCH v2] Fix MMC access on Sabrelite Martyn Welch
[PATCH v2] Fix MMC access on Sabrelite Martyn Welch
[PATCH U-BOOT v2 00/30] fs: btrfs: Re-implement btrfs support using the more widely used extent buffer base code Qu Wenruo
[PATCH] lz4: fix decompressor on big-endian powerpc Julius Werner
[PATCH] fs/fat.c: Do not perform zero block reads if there are no blocks left Jason Wessel
[PATCH] fs/fat.c: Do not perform zero block reads if there are no blocks left Jason Wessel
[PATCH] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left Jason Wessel
[PATCH v3] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left Jason Wessel
[RFC PATCH 0/3] Improve USB Keyboard support for rpi3/rpi4 Jason Wessel
[RFC PATCH 1/3] xhci: Add polling support for USB keyboards Jason Wessel
[RFC PATCH 2/3] usb_kbd: Do not fail the keyboard if it does not have an interrupt pending Jason Wessel
[RFC PATCH 3/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address" Jason Wessel
[RFC PATCH v2 0/5] Improve USB Keyboard support for rpi3/rpi4 Jason Wessel
[RFC PATCH v2 1/5] xhci: Add polling support for USB keyboards Jason Wessel
[RFC PATCH v2 2/5] usb_kbd: Do not fail the keyboard if it does not have an interrupt pending Jason Wessel
[RFC PATCH v2 3/5] common/usb.c: Work around keyboard reporting "USB device not accepting new address" Jason Wessel
[RFC PATCH v2 4/5] xhci-ring.c: Add the poll_pend state to properly abort transactions Jason Wessel
[RFC PATCH v2 5/5] xhci-ring: Fix crash when issuing "usb reset" Jason Wessel
rockchip: enable PCIe and NVMe on Pinebook Pro Patrick Wildt
[PATCH v3 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64 Patrick Wildt
rockchip: correctly set vop0 or vop1 Patrick Wildt
rockchip: correctly set vop0 or vop1 Patrick Wildt
rockchip: correctly set vop0 or vop1 Patrick Wildt
Can't access mmc #0 on mt7623 when booted from external SD David Woodhouse
Can't access mmc #0 on mt7623 when booted from external SD David Woodhouse
Can't access mmc #0 on mt7623 when booted from external SD David Woodhouse
Can't access mmc #0 on mt7623 when booted from external SD David Woodhouse
Can't access mmc #0 on mt7623 when booted from external SD David Woodhouse
Can't access mmc #0 on mt7623 when booted from external SD David Woodhouse
Can't access mmc #0 on mt7623 when booted from external SD David Woodhouse
[PATCH] pinctrl: mediatek: add PUPD/R0/R1 support for MT7623 David Woodhouse
[PATCH] env/fat.c: allow loading from a FAT partition on the MMC boot device David Woodhouse
[RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps,reset-gpio" phy-rst gpio for stm32 David Wu
[RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32 David Wu
[PATCH] rockchip: i2c: fix switch to new implementation for rk3188 David Wu
Aw: [PATCH] pinctrl: mediatek: add PUPD/R0/R1 support for MT7623 Frank Wunderlich
[PATCH 2/3] ram: rk3328: add support ddr4 init Da Xue
[PATCH v2 0/2] gpio: Add a managed API Pratyush Yadav
[PATCH v5 00/21] mtd: spi-nor-core: add xSPI Octal DTR support Pratyush Yadav
[PATCH v5 01/21] spi: spi-mem: allow specifying whether an op is DTR or not Pratyush Yadav
[PATCH v5 02/21] spi: spi-mem: allow specifying a command's extension Pratyush Yadav
[PATCH v5 03/21] spi: cadence-qspi: Do not calibrate when device tree sets read delay Pratyush Yadav
[PATCH v5 04/21] spi: cadence-qspi: Add support for octal DTR flashes Pratyush Yadav
[PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection Pratyush Yadav
[PATCH v5 06/21] mtd: spi-nor-core: Add a ->setup() hook Pratyush Yadav
[PATCH v5 07/21] mtd: spi-nor-core: Move SFDP related declarations to top Pratyush Yadav
[PATCH v5 08/21] mtd: spi-nor-core: Introduce flash-specific fixup hooks Pratyush Yadav
[PATCH v5 09/21] mtd: spi-nor-core: Rework hwcaps selection Pratyush Yadav
[PATCH v5 10/21] mtd: spi-nor-core: Add support for DTR protocol Pratyush Yadav
[PATCH v5 11/21] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D Pratyush Yadav
[PATCH v5 12/21] mtd: spi-nor-core: Get command opcode extension type from BFPT Pratyush Yadav
[PATCH v5 13/21] mtd: spi-nor-core: Parse xSPI Profile 1.0 table Pratyush Yadav
[PATCH v5 14/21] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode Pratyush Yadav
[PATCH v5 15/21] mtd: spi-nor-core: Enable octal DTR mode when possible Pratyush Yadav
[PATCH v5 16/21] mtd: spi-nor-core: Do not make invalid quad enable fatal Pratyush Yadav
[PATCH v5 17/21] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT Pratyush Yadav
[PATCH v5 18/21] mtd: spi-nor-core: Perform a Soft Reset on shutdown Pratyush Yadav
[PATCH v5 19/21] mtd: spi-nor-core: Perform a Soft Reset on boot Pratyush Yadav
[PATCH v5 20/21] mtd: spi-nor-core: Add support for Cypress Semper flash Pratyush Yadav
[PATCH v5 21/21] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode Pratyush Yadav
[PATCH v2] env: sf: Free the old env_flash Pratyush Yadav
[PATCH 3/8] regmap: Allow specifying read/write width Pratyush Yadav
[PATCH 2/8] regmap: zero out the regmap on allocation Pratyush Yadav
[PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection Pratyush Yadav
[PATCH v5 05/21] arm: mvebu: x530: Disable smart hwcaps selection Pratyush Yadav
[PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support Pratyush Yadav
[PATCH v6 01/21] spi: spi-mem: allow specifying whether an op is DTR or not Pratyush Yadav
[PATCH v6 02/21] spi: spi-mem: allow specifying a command's extension Pratyush Yadav
[PATCH v6 03/21] spi: cadence-qspi: Do not calibrate when device tree sets read delay Pratyush Yadav
[PATCH v6 04/21] spi: cadence-qspi: Add support for octal DTR flashes Pratyush Yadav
[PATCH v6 05/21] arm: mvebu: x530: Disable smart hwcaps selection Pratyush Yadav
[PATCH v6 06/21] mtd: spi-nor-core: Add a ->setup() hook Pratyush Yadav
[PATCH v6 07/21] mtd: spi-nor-core: Move SFDP related declarations to top Pratyush Yadav
[PATCH v6 08/21] mtd: spi-nor-core: Introduce flash-specific fixup hooks Pratyush Yadav
[PATCH v6 09/21] mtd: spi-nor-core: Rework hwcaps selection Pratyush Yadav
[PATCH v6 10/21] mtd: spi-nor-core: Add support for DTR protocol Pratyush Yadav
[PATCH v6 11/21] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D Pratyush Yadav
[PATCH v6 12/21] mtd: spi-nor-core: Get command opcode extension type from BFPT Pratyush Yadav
[PATCH v6 13/21] mtd: spi-nor-core: Parse xSPI Profile 1.0 table Pratyush Yadav
[PATCH v6 14/21] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode Pratyush Yadav
[PATCH v6 15/21] mtd: spi-nor-core: Enable octal DTR mode when possible Pratyush Yadav
[PATCH v6 16/21] mtd: spi-nor-core: Do not make invalid quad enable fatal Pratyush Yadav
[PATCH v6 17/21] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT Pratyush Yadav
[PATCH v6 18/21] mtd: spi-nor-core: Perform a Soft Reset on shutdown Pratyush Yadav
[PATCH v6 19/21] mtd: spi-nor-core: Perform a Soft Reset on boot Pratyush Yadav
[PATCH v6 20/21] mtd: spi-nor-core: Add support for Cypress Semper flash Pratyush Yadav
[PATCH v6 21/21] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode Pratyush Yadav
[PATCH 7/8] regmap: Add support for regmap fields Pratyush Yadav
[PATCH v2 0/8] regmap: Add managed API, regmap fields, regmap config Pratyush Yadav
[PATCH v2 1/8] regmap: Add devm_regmap_init() Pratyush Yadav
[PATCH v2 2/8] regmap: zero out the regmap on allocation Pratyush Yadav
[PATCH v2 3/8] regmap: Allow specifying read/write width Pratyush Yadav
[PATCH v2 4/8] regmap: Allow left shifting register offset before access Pratyush Yadav
[PATCH v2 5/8] regmap: Add regmap_init_mem_range() Pratyush Yadav
[PATCH v2 6/8] regmap: Allow devices to specify regmap range start and size in config Pratyush Yadav
[PATCH v2 7/8] regmap: Add support for regmap fields Pratyush Yadav
[PATCH v2 8/8] test: dm: Add tests for regmap managed API and regmap fields Pratyush Yadav
[PATCH] regmap: Check for out-of-range offsets before mapping them Pratyush Yadav
[RFC PATCH 1/1] gpio: Handle NULL pointers gracefully Pratyush Yadav
[PATCH v2 0/2] gpio: Add a managed API Pratyush Yadav
[PATCH v3 0/6] drivers: Add a framework for MUX drivers Pratyush Yadav
[PATCH v3 1/6] drivers: Add a new framework for multiplexer devices Pratyush Yadav
[PATCH v3 2/6] dm: board: complete the initialization of the muxes in initr_dm() Pratyush Yadav
[PATCH v3 3/6] drivers: mux: mmio-based syscon mux controller Pratyush Yadav
[PATCH v3 4/6] cmd: Add a mux command Pratyush Yadav
[PATCH v3 5/6] sandbox: Enable memio operations in board_init Pratyush Yadav
[PATCH v3 6/6] test: Add tests for the multiplexer framework Pratyush Yadav
[PATCH v2 0/2] reset: Add a managed API Pratyush Yadav
[PATCH v2 1/2] drivers: reset: Add a managed API to get reset controllers from the DT Pratyush Yadav
[PATCH v2 2/2] test: reset: Add tests for the managed API Pratyush Yadav
[PATCH] regmap: Check for out-of-range offsets before mapping them Pratyush Yadav
[PATCH v6 00/21] mtd: spi-nor-core: add xSPI Octal DTR support Pratyush Yadav
[PATCH v2 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree Pratyush Yadav
[PATCH 1/3] treewide: convert bd_t to struct bd_info by coccinelle Masahiro Yamada
[PATCH 2/3] treewide: convert bd_t to struct bd_info manually Masahiro Yamada
[PATCH 3/3] asm/u-boot.h: remove bd_t definitions Masahiro Yamada
[PATCH v2] arm64: issue ISB after updating system registers Masahiro Yamada
rockchip: correctly set vop0 or vop1 Andy Yan
Pull request: u-boot-rockchip-20200531 Kever Yang
[PATCH v6 00/16] Add Rockchip RK3399 USB3.0 Host support Kever Yang
[PATCH] rockchip: rockpro64: enable DM_KEYBOARD Kever Yang
[PATCH] rockchip: enable USB OHCI host for RockPro64 Kever Yang
[PATCH 0/3] doc: rockchip: Improve documentation Kever Yang
[PATCH] pci: Make Rockchip PCIe voltage regulators optional Kever Yang
[PATCH v2 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399 Kever Yang
[PATCH v2 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64 Kever Yang
[PATCH v2 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399 Kever Yang
[PATCHv5][1/2] rockchip: rk3328: add rock-pi-e dts file Kever Yang
[PATCHv5][2/2] rockchip: rk3328: add rock-pi-e-rk3328_defconfig file Kever Yang
[PATCH] rockchip: Add delay after link-training Kever Yang
Thoughts on code line length Kever Yang
[PATCH] rockchip: rockpro64: initialize USB in preboot Kever Yang
[PATCH v2 1/4] Makefile: Drop to handle rkspi image type Kever Yang
[PATCH v2 2/4] roc-rk3399-pc: Mark default env from SPI Kever Yang
[PATCH v2 3/4] roc-rk3399-pc: Add SPI boot Kever Yang
[PATCH v2 4/4] doc: rockchip: Document SPI flash program steps Kever Yang
[PATCH 1/2] rockchip: rockpro64: Store default env into SPI Kever Yang
[PATCH 2/2] rockchip: rockpro64: add SPI boot Kever Yang
[PATCH 0/6] revive Theobroma-Systems puma board Kever Yang
[PATCH v2 1/8] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin Kever Yang
[PATCH v2 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator Kever Yang
[PATCH v2 3/8] rockchip: puma: fix indentation for -u-boot.dtsi Kever Yang
[PATCH v2 4/8] rockchip: puma: fix indentation of misc_init_r Kever Yang
[PATCH v2 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream Kever Yang
[PATCH v2 6/8] rockchip: puma: remove separate fit generator Kever Yang
[PATCH v2 7/8] rockchip: puma: drop special handling of usb host regulator Kever Yang
[PATCH v2 8/8] rockchip: puma: enable new usb config options Kever Yang
[PATCH] rockchip: rk3399-evb: add stdout-path for the board Kever Yang
[PATCH] test: add dependency for UT_LOG Kever Yang
[PATCH v3 5/8] rockchip: puma: reorganize devicetrees to actually work and match upstream Kever Yang
[PATCH] test: add dependency for UT_LOG Kever Yang
rockchip: enable PCIe and NVMe on Pinebook Pro Kever Yang
[PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399 Kever Yang
Re: [PATCH v3 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399【请注意，邮件由mark.kettenis at sibelius.xs4all.nl代发】 Kever Yang
Pull request: u-boot-rockchip-20200607 Kever Yang
rockchip: correctly set vop0 or vop1 Kever Yang
[PATCH] rockchip: Add delay after link-training Kever Yang
Re: [PATCH] rockchip: rockpro64: initialize USB in preboot【请注意，邮件由u-boot-bounces at lists.denx.de代发】 Kever Yang
[PATCH] rk3399: Add BOOTENV_SF command Kever Yang
[PATCH] rk3399: Add BOOTENV_SF command Kever Yang
[PATCH] rk3399: Add BOOTENV_SF command Kever Yang
[PATCH] rockchip: rk3188: Fix back to BROM boot Kever Yang
[PATCH] rockchip: rk3188: Fix back to BROM boot Kever Yang
[PATCH] rockchip: i2c: fix switch to new implementation for rk3188 Kever Yang
[PATCH 1/3] rockchip: Pinebook Pro: enable rng to provide an entropy source Kever Yang
[PATCH 2/3] rockchip: Pinebook Pro: Fix USB and the USB attached keyboard Kever Yang
[PATCH 3/3] rockchip: Pinebook Pro: Fix SPI flash and store env on it Kever Yang
[PATCH 1/4] arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi Kever Yang
[PATCH 2/4] arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM Kever Yang
[PATCH 3/4] ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier Kever Yang
[PATCH 4/4] arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support Kever Yang
[PATCH] rockchip: rk3399: allow deselecting SPL_ATF_NO_PLATFORM_PARAM Kever Yang
Re: [PATCH v2 1/6] rock-pi-4: Enable USB3 Host【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】 Kever Yang
[PATCH v2 2/6] rock-pi-4: Enable PCI/NVME Kever Yang
[PATCH v2 3/6] rock-pi-4: Enable USB Gadget Kever Yang
[PATCH v2 4/6] rock-pi-4: Enable HDMI output Kever Yang
[PATCH v2 5/6] roc-rk3399-pc: Enable USB Gadget Kever Yang
[PATCH v2 6/6] roc-rk3399-pc: Update ENV offset, size Kever Yang
[PATCH 1/3] ARM: dts: rockchip: radxa-dalang: Update sdmmc properties Kever Yang
[PATCH 2/3] ARM: dts: rockchip: Add VMARC RK3288 SOM initial support Kever Yang
[PATCH 3/3] ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support Kever Yang
[PATCH 1/2] rockchip: clk: rk3188: change APLL to safe 600MHz Kever Yang
[PATCH 2/2] rockchip: clk: rk3188: enable bwadj for rk3188 DPLL Kever Yang
rockchip: correctly set vop0 or vop1 Kever Yang
[PATCH v4 4/5] rockchip: Separate the reset cause from display cpuinfo Kever Yang
[PATCH v4 3/5] roc-rk3399-pc: Move leds setup in SPL Kever Yang
[PATCH v4 2/5] rk3399: spl: Print SPL banner after relocation Kever Yang
[PATCH v4 1/5] rockchip: spl: Add spl_board_init Kever Yang
Pull request: u-boot-rockchip-20200628 Kever Yang
[PATCH] gitlab: add pycrypto for arm64 Kever Yang
[PATCH] gitlab: add pycrypto for arm64 Kever Yang
[PATCH v2 03/23] am335x: baltos: Enable DM_SPI Yegor Yefremov
USB patch for rpi4 Stuart Yoder
USB patch for rpi4 Stuart Yoder
USB patch for rpi4 Stuart Yoder
USB patch for rpi4 Stuart Yoder
rk3399: boot from compressed Image Tian Yuanhao
[PATCH] usb: xhci-dwc3: Fix usage of bulk PHY API Chunfeng Yun
[PATCH 0/6] Add support MediaTek USB3 DRD driver Chunfeng Yun
[PATCH 1/6] dt-binding: usb: add bindings for some common properties Chunfeng Yun
[PATCH 2/6] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD Chunfeng Yun
[PATCH 3/6] usb: add USB_SPEED_SUPER_PLUS Chunfeng Yun
[PATCH 4/6] usb: add MediaTek USB3 DRD driver Chunfeng Yun
[PATCH 5/6] arm: dts: mt8512: add usb related nodes Chunfeng Yun
[PATCH 6/6] configs: mt8512: enable fastboot Chunfeng Yun
[PATCH 03/16] dh_imx6: Switch to full DM-aware Ludwig Zenz
AW: [PATCH 03/16] dh_imx6: Switch to full DM-aware Ludwig Zenz
[PATCH 03/16] dh_imx6: Switch to full DM-aware Ludwig Zenz
[PATCH 1/2] armv8: dts: fsl-lx2160a: add flash node under dspi to qds dts Qiang Zhao
[PATCH 2/2] config: lx2160/2a: enable dspi Qiang Zhao
[PATCH 1/2] armv8: dts: fsl-lx2160a: add flash node under dspi to qds dts Qiang Zhao
[RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40 Icenowy Zheng
[linux-sunxi] Re: [RFC PATCH] sunxi: support asymmetric dual rank DRAM on A64/R40 Icenowy Zheng
[PATCH v2] mmc: sdhci: Fix HISPD bit handling Marc Zyngier
[U-Boot] Pull request: u-boot-riscv/master uboot at andestech.com
[U-Boot] Pull request: u-boot-riscv/master uboot at andestech.com
[PATCH]: cmd: part: add part block command razvan becheriu
[PATCH]: cmd: part: add part block command razvan becheriu
[PATCH]: cmd: part: add part block command razvan becheriu
[PATCH] ARM: dts: imxrt1050: indent lcdif node correctly sbabic at denx.de
[PATCH v2 1/1] imx: rom api: fix image offset computation sbabic at denx.de
[PATCH] power: pmic: Add SPL Kconfig entry for PFUZE100 sbabic at denx.de
[PATCH 5/5] verdin-imx8mm: Select the watchdog driver sbabic at denx.de
[PATCH v3 3/5] imx8mp_evk: spl: use spl_early_init sbabic at denx.de
[PATCH] imx: Update MTD partitions layout for display5 (i.MX6Q) board sbabic at denx.de
[PATCH v3 4/5] imx8mp_evk: spl: no need the code since spl framework could do that sbabic at denx.de
[PATCH 2/2] ARM: dts: imx: m53menlo: Convert to DM_ETH sbabic at denx.de
imx: move ATF to the back of the FIT to fix loading over yModem sbabic at denx.de
[PATCH v3 1/5] imx8mp_evk: spl: drop useless code sbabic at denx.de
[PATCH v3 2/5] imx8mp_evk: spl: drop timer_init sbabic at denx.de
[PATCH] imx8mp_evk: Add a README file sbabic at denx.de
[PATCH v3 5/5] imx: imx8mp_evk: fix boot issue sbabic at denx.de
[PATCH 4/5] imx8mp_evk: Select the watchdog driver sbabic at denx.de
[PATCH 2/5] imx8mn_ddr4_evk: Select the watchdog driver sbabic at denx.de
[PATCH 1/2] ARM: imx: m53menlo: Do not fail boot on invalid splash screen sbabic at denx.de
[PATCH] ARM: imx: ddr: Add missing PHY reset sbabic at denx.de
[PATCH 3/5] imx8mm_beacon: Select the watchdog driver sbabic at denx.de
[PATCH] imx: Kconfig: enable IMX_BOOTAUX for i.MX8M sbabic at denx.de
[PATCH 1/5] imx8mm_evk: Select the watchdog driver sbabic at denx.de
[PATCH v1 01/13] apalis-imx8: enable of_system_setup sbabic at denx.de
[PATCH v1 09/13] apalis-tk1: fix setting fdtfile value sbabic at denx.de
[PATCH v2] imx: imx8qm_rom7720_a1: update README sbabic at denx.de
[PATCH 1/2] gpio: mxc_gpio: change gpio index for i.MX8 sbabic at denx.de
[PATCH] ARM: imx6: Fetch MAC address in board_init_late() on DH iMX6 PDK2 sbabic at denx.de
[PATCH v1 13/13] colibri_imx6: boot env configuration updates sbabic at denx.de
[PATCH v1 02/13] apalis/colibri-imx8: re-enable CONFIG_IMX_SCU_THERMAL sbabic at denx.de
[PATCH v3 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1 sbabic at denx.de
[PATCH v1 05/13] colibri-imx6ull/imx7: define bootubipart for distro boot sbabic at denx.de
[PATCH v3 4/4] mx6cuboxi: remove unused code sbabic at denx.de
[PATCH v3 1/4] mx6cuboxi: enable MMC and eMMC in DT for SPL sbabic at denx.de
[PATCH v3 4/4] mx6cuboxi: Convert to DM_ETH sbabic at denx.de
[PATCH] ARM: imx: soc: Select default TEXT_BASE for MX7 sbabic at denx.de
[PATCH v3 3/4] mx6cuboxi: enable OF_CONTROL and DM in SPL sbabic at denx.de
[PATCH 3/3] mx6ull_14x14_evk_plugin: Convert to DM_ETH sbabic at denx.de
[PATCH v1 03/13] colibri-imx8x: declare consoleargs sbabic at denx.de
[PATCH v1 12/13] colibri_imx7: boot env configuration updates sbabic at denx.de
[PATCH v1 04/13] colibri_imx7: add addresses required for distro boot sbabic at denx.de
[PATCH v1 11/13] apalis_imx6: boot env configuration updates sbabic at denx.de
[PATCH 2/2] arm: dts: imx: fsl-imx8qm.dtsi: fix gpio aliases sbabic at denx.de
[PATCH v1 08/13] apalis-tk1: enable distroboot sbabic at denx.de
[PATCH v1 06/13] colibri_vf_defconfig: enable part cmd sbabic at denx.de
[PATCH 2/2] mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper sbabic at denx.de
[PATCH v3 2/4] mx6cuboxi: customize board_boot_order to access eMMC sbabic at denx.de
[PATCH v3 1/4] phy: atheros: ar8035: Fix clock output calculation sbabic at denx.de
[PATCH 1/1] arm: wandboard: move CONFIG_MXC_UART to defconfig sbabic at denx.de
[PATCH] ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode sbabic at denx.de
[PATCH v1 10/13] toradex: imx: enable BOOTCOUNT feature sbabic at denx.de
[PATCH v1 07/13] configs/colibri_vf.h: drop sdboot in favour of distro_bootcmd sbabic at denx.de
[PATCH] ARM: dts: imx6qdl-sabreauto: Fix AR8031 phy-mode sbabic at denx.de
[PATCH v2] Fix MMC access on Sabrelite sbabic at denx.de
[PATCH v3 2/4] net: fec: Allow the PHY node to be retrieved sbabic at denx.de
[PATCH 1/3] mx6slevk_spinor: Convert to DM_ETH sbabic at denx.de
[PATCH] ARM: imx: ddr: Fill in missing DDRC ZQCTLx on i.MX7 sbabic at denx.de
[PATCH] ARM: imx: soc: Switch BOARD_EARLY_INIT_F to imply on MX7 sbabic at denx.de
[PATCH 1/2] mx6ul_14x14_evk: Enable SPL USB and SDP support sbabic at denx.de
[PATCH 2/3] mx6slevk_spl: Convert to DM_ETH sbabic at denx.de
[PATCH v1 00/15] add basic driver support for broadcom NS3 soc dphadke
[RESEND PATCH] usb: max3420: add the gadget driver jassisinghbrar at gmail.com
[PATCHv2] usb: max3420: add the gadget driver jassisinghbrar at gmail.com
[PATCH] armv8: MMU: Mark code memory Executable, any other Non-Executable marek.bykowski at gmail.com
[PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable marek.bykowski at gmail.com
[PATCH]: cmd: part: add part block command razvan.becheriu at gmail.com
[PATCH] cmd: part: Add 'block' sub-command razvan.becheriu at gmail.com
[PATCH v7 3/3] dm: uclass: don't assign aliased seq numbers sjg at google.com
[PATCH v2] doc: driver-model: fix typo in design.rst sjg at google.com
[PATCH v7 1/3] usb: provide a device tree node to USB devices sjg at google.com
[PATCH v7 2/3] dm: core: fix dev_read_alias_highest_id() without libfdt sjg at google.com
[PATCH 1/1] log: check argument of 'log level' command sjg at google.com
[PATCH 1/1] log: clean up Kconfig sjg at google.com
[PATCH 1/1] doc: move README.log to HTML documentation sjg at google.com
[PATCH v2] doc: log: correct option name CONFIG_LOG_MAX_LEVEL sjg at google.com
[PATCH] libfdt: Remove superfluous NUL character from overlay symbols sjg at google.com
[PATCH] regmap: Check for out-of-range offsets before mapping them sjg at google.com
[PATCH 1/1] doc: driver-model: there is no UCLASS_SATA sjg at google.com
[PATCH] buildman: Remove _of_#_ from results directory paths sjg at google.com
[PATCH 5/6] patman: Support warnings in the patch subject sjg at google.com
[PATCH 4/6] patman: Handle checkpatch output with notes and code sjg at google.com
[PATCH 6/6] patman: Complain if a checkpatch line is not understood sjg at google.com
[PATCH 3/6] patman: Don't try to process checkpatch lines twice sjg at google.com
[PATCH 2/6] patman: Support emacs mode with checkpatch sjg at google.com
[PATCH 1/6] patman: Fix 'warning' typo sjg at google.com
[PULL] u-boot-atmel-fixes-2020.07-a Eugen.Hristev at microchip.com
[PULL] u-boot-atmel-fixes-2020.07-a Eugen.Hristev at microchip.com
[PATCH 1/2] ARM: at91: Enable SPL_SEPARATE_BSS by default Eugen.Hristev at microchip.com
[PATCH v2 0/2] ARM: at91: Allow running SPL with DTB append Eugen.Hristev at microchip.com
[PATCH 1/2] ARM: dts: sama5d4: fix gadget endpoint address warning Eugen.Hristev at microchip.com
[PATCH] armv8: ls1028ardb: add xspi parameter to qixis command andy.tang at nxp.com
[PATCH v2] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready haibo.chen at nxp.com
[PATCH 1/2] mmc: fsl_esdhc_imx: fix the mask for tuning start point haibo.chen at nxp.com
[PATCH 2/2] mmc: fsl_esdhc_imx: disable the CMD CRC check for standard tuning haibo.chen at nxp.com
[PATCH 1/1] ls1021a: Add DDR errata num 008109 jaiprakash.singh at nxp.com
[PATCH 0/3] Support for specifying extra IOMMU mappings for PCI laurentiu.tudor at nxp.com
[PATCH 1/3] pci: layerscape: move per-pci device fdt fixup in a function laurentiu.tudor at nxp.com
[PATCH 2/3] pci: layerscape: move pci node search in a common function laurentiu.tudor at nxp.com
[PATCH 3/3] pci: layerscape: add a way of specifying additional iommu mappings laurentiu.tudor at nxp.com
[PATCH 1/1] include/configs: ls1012a: Remove fdt_high env variable udit.agarwal at nxp.com
[PATCH] sync helios4 config to clearfog and dts to kernel dgilmore at redhat.com
[PATCH] [RFC] tools: fitmount: fuse mount fit images selvamuthukumar v
[PATCH] [RFC] tools: fitmount: fuse mount fit images selvamuthukumar v
U-BOOT build for t1024rdb Uğur Şen

Last message date: Tue Jun 30 23:35:07 CEST 2020
Archived on: Thu Jul 2 10:16:23 CEST 2020

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).