[PATCH 0/2] omap4: sdp: convert to device model

[Peter Ujfalusi]

On 15/06/2020 13.16, Peter Ujfalusi wrote:
> Hi,
> 
> The series is based on Tero's omap4 panda and omap5 uevm device model conversion
> patches.
> 
> To avoid removal of the SDP4430 due to neglect.
> With these patches applied no more complaints about DM_SPL conversion and the
> board boots up Linux.
> We never had ethernet support for spd4430 in mainline (ks8851 on spi bus), this
> is still the case.
> 
> Linux boots up, but for some reason ethernet is not responsible, that needs to
> be investigated, unlikely caused by u-boot.

Actually it works in Linux.

> I really like to keep sdp4430/Blaze support as it is the platform where I can
> test DMIC and other audio features of McPDM/twl6040. The board also have dual
> LCD, which is a nice thing to have.
> 
> Regards,
> Peter
> ---
> Peter Ujfalusi (2):
>   omap4: Copy device tree from Linux 5.7.y for SDP4430
>   omap4: sdp: convert to device model
> 
>  arch/arm/dts/Makefile               |   4 +
>  arch/arm/dts/omap4-sdp-es23plus.dts |  14 +
>  arch/arm/dts/omap4-sdp.dts          | 713 ++++++++++++++++++++++++++++
>  board/ti/sdp4430/sdp.c              |  12 +
>  configs/omap4_sdp4430_defconfig     |   8 +
>  5 files changed, 751 insertions(+)
>  create mode 100644 arch/arm/dts/omap4-sdp-es23plus.dts
>  create mode 100644 arch/arm/dts/omap4-sdp.dts
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki