[PATCH v2 16/17] test/py: add a test for efi firmware update capsule of FIT image
AKASHI Takahiro
takahiro.akashi at linaro.org
Wed Jun 17 04:55:14 CEST 2020
The test can run on sandbox build and it attempts to execute a firmware
update via a capsule-on-disk, using a FIT image capsule,
CONFIG_EFI_CAPSULE_FIT.
To run this test successfully, you need configure U-Boot specifically;
See test_capsule_firmware.py for requirements, and hence it won't run
on Travis CI.
Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
---
test/py/tests/test_efi_capsule/conftest.py | 102 ++++++
test/py/tests/test_efi_capsule/defs.py | 24 ++
.../test_efi_capsule/test_capsule_firmware.py | 308 ++++++++++++++++++
.../tests/test_efi_capsule/uboot_bin_env.its | 36 ++
test/py/tests/test_efi_capsule/uboot_env.its | 25 ++
5 files changed, 495 insertions(+)
create mode 100644 test/py/tests/test_efi_capsule/conftest.py
create mode 100644 test/py/tests/test_efi_capsule/defs.py
create mode 100644 test/py/tests/test_efi_capsule/test_capsule_firmware.py
create mode 100644 test/py/tests/test_efi_capsule/uboot_bin_env.its
create mode 100644 test/py/tests/test_efi_capsule/uboot_env.its
diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py
new file mode 100644
index 000000000000..58daf63f1e52
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/conftest.py
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2020, Linaro Limited
+# Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
+
+import os
+import os.path
+import re
+from subprocess import call, check_call, check_output, CalledProcessError
+import pytest
+from defs import *
+
+#
+# Fixture for UEFI secure boot test
+#
+
+
+ at pytest.fixture(scope='session')
+def efi_capsule_data(request, u_boot_config):
+ """Set up a file system to be used in UEFI capsule test.
+
+ Args:
+ request: Pytest request object.
+ u_boot_config: U-boot configuration.
+
+ Return:
+ A path to disk image to be used for testing
+ """
+ image_path = u_boot_config.persistent_data_dir
+ image_path = image_path + '/' + EFI_BOOTDEV_IMAGE_NAME
+
+ try:
+ # create U-Boot environment storage
+ check_call('dd if=/dev/zero of=./spi.bin bs=1MiB count=16', shell=True)
+
+ # create a disk/partition
+ check_call('dd if=/dev/zero of=%s bs=1MiB count=%d'
+ % (image_path, EFI_BOOTDEV_IMAGE_SIZE), shell=True)
+ check_call(
+ 'sgdisk %s -n 1:0:+%dMiB -A 1:set:0 -t 1:C12A7328-F81F-11D2-BA4B-00A0C93EC93B' %
+ (image_path, EFI_BOOTDEV_PART_SIZE), shell=True)
+ # create a file system
+ check_call('dd if=/dev/zero of=%s.tmp bs=1MiB count=%d'
+ % (image_path, EFI_BOOTDEV_PART_SIZE), shell=True)
+ check_call('mkfs -t %s %s.tmp'
+ % (EFI_BOOTDEV_FS_TYPE, image_path), shell=True)
+ check_call('dd if=%s.tmp of=%s bs=1MiB seek=1 count=%d conv=notrunc'
+ % (image_path, image_path, 1), shell=True)
+ check_call('rm %s.tmp' % image_path, shell=True)
+ loop_dev = check_output(
+ 'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+ (EFI_BOOTDEV_PART_SIZE, image_path), shell=True).decode()
+ check_call('sudo mkdir -p %s' % MNT_PNT, shell=True)
+ check_call('sudo mount -t %s -o umask=000 %s %s'
+ % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT),
+ shell=True)
+ check_call('mkdir -p %s%s' % (MNT_PNT, CAPSULE_DATA_DIR), shell=True)
+ check_call(
+ 'mkdir -p %s%s' %
+ (MNT_PNT, CAPSULE_INSTALL_DIR), shell=True)
+
+ # Create its'
+ # one region for U-Boot env in FIT image
+ check_call(
+ 'sed -e \"s?BINFILE?%s%s/%s?\" %s/test/py/tests/test_efi_capsule/uboot_env.its > %s%s/uboot_env.its' %
+ (MNT_PNT, CAPSULE_DATA_DIR, FW_BIN, u_boot_config.source_dir, MNT_PNT, CAPSULE_DATA_DIR), shell=True)
+
+ # two regions: one for u-boot.bin and the other for u-boot.env
+ check_call(
+ 'echo -n u-boot:Old > %s%s/u-boot.bin.old; echo -n u-boot:New > %s%s/u-boot.bin.new; echo -n u-boot-env:Old -> %s%s/u-boot.env.old; echo -n u-boot-env:New > %s%s/u-boot.env.new' %
+ (MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_DATA_DIR),
+ shell=True)
+ check_call(
+ 'sed -e \"s?BINFILE1?%s%s/u-boot.bin.new?\" -e \"s?BINFILE2?%s%s/u-boot.env.new?\" %s/test/py/tests/test_efi_capsule/uboot_bin_env.its > %s%s/uboot_bin_env.its' %
+ (MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ u_boot_config.source_dir,
+ MNT_PNT,
+ CAPSULE_DATA_DIR),
+ shell=True)
+
+ # cleanup
+ call('sudo umount %s' % loop_dev, shell=True)
+ call('sudo losetup -d %s' % loop_dev, shell=True)
+
+ except CalledProcessError as exception:
+ pytest.skip('Setup failed: %s' % exception.cmd)
+ return
+ else:
+ yield image_path
+ finally:
+ call('sudo rm -rf %s' % MNT_PNT, shell=True)
+ #call('rm -f %s' % image_path, shell=True)
+ call('rm -f ./spi.bin', shell=True)
diff --git a/test/py/tests/test_efi_capsule/defs.py b/test/py/tests/test_efi_capsule/defs.py
new file mode 100644
index 000000000000..911883368b27
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/defs.py
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+# Disk image name
+EFI_BOOTDEV_IMAGE_NAME = 'test_efi_capsule.img'
+
+# Size in MiB
+EFI_BOOTDEV_IMAGE_SIZE = 16
+EFI_BOOTDEV_PART_SIZE = 8
+
+# Partition file system type
+EFI_BOOTDEV_FS_TYPE = 'vfat'
+
+# Mount Point for set-up
+MNT_PNT = '/mnt/test_efi_capsule'
+
+# Owner guid
+GUID = '11111111-2222-3333-4444-123456789abc'
+
+# Directories
+CAPSULE_DATA_DIR = '/EFI/CapsuleTestData'
+CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule'
+
+#
+FW_BIN = 'spi_sf.bin'
diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware.py b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
new file mode 100644
index 000000000000..490dc039d81f
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
@@ -0,0 +1,308 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2020, Linaro Limited
+# Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
+#
+# U-Boot UEFI: Firmware Update Test
+
+"""
+This test verifies capsule-on-disk firmware update
+"""
+
+from subprocess import check_call, check_output, CalledProcessError
+import pytest
+from defs import *
+
+
+ at pytest.mark.boardspec('sandbox')
+ at pytest.mark.buildconfigspec('efi_capsule_firmware_fit')
+ at pytest.mark.buildconfigspec('efi_capsule_on_disk')
+ at pytest.mark.buildconfigspec('dfu')
+ at pytest.mark.buildconfigspec('dfu_sf')
+ at pytest.mark.buildconfigspec('env_is_in_spi_flash')
+ at pytest.mark.buildconfigspec('cmd_efidebug')
+ at pytest.mark.buildconfigspec('cmd_fat')
+ at pytest.mark.buildconfigspec('cmd_nvedit_efi')
+ at pytest.mark.buildconfigspec('cmd_saveenv')
+ at pytest.mark.slow
+class TestEfiCapsuleFirmwareFit(object):
+ def test_efi_capsule_fw1(
+ self, u_boot_config, u_boot_console, efi_capsule_data):
+ """
+ Test Case 1 - Update U-Boot environment on SPI Flash
+ """
+ # "-T" (or "-D") is required to enable spi flash on sandbox
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ disk_img = efi_capsule_data
+ with u_boot_console.log.section('Test Case 1-a, before reboot'):
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
+ 'efidebug boot order 1',
+ 'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
+ 'env set dfu_alt_info sf 0:0=u-boot-env raw 0 0x200000',
+ 'env set FW_STATUS This is Old environment',
+ 'env print FW_STATUS',
+ 'env save'])
+ assert 'Old environment' in ''.join(output)
+
+ output = u_boot_console.run_command_list([
+ 'env set FW_STATUS This is New environment',
+ 'env export -c 5000000',
+ 'fatwrite host 0:1 5000000 %s/%s $filesize'
+ % (CAPSULE_DATA_DIR, FW_BIN),
+ 'env set -e -guid 39b68c46-f7fb-441b-b6ec-16b0f69821f3 Capsule0000',
+ 'fatls host 0:1 %s' % CAPSULE_DATA_DIR
+ ])
+ assert '%s' % FW_BIN in ''.join(output)
+
+ # create a capsule file
+ try:
+ loop_dev = check_output(
+ 'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+ (EFI_BOOTDEV_PART_SIZE, disk_img), shell=True).decode()
+ check_call('sudo mount -t %s -o umask=000 %s %s'
+ % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT), shell=True)
+ check_call(
+ '%s/tools/mkimage -f %s%s/uboot_env.its %s%s/uboot_env.itb' %
+ (u_boot_config.build_dir,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_DATA_DIR),
+ shell=True)
+ check_call(
+ '%s/tools/mkeficapsule --fit %s%s/uboot_env.itb --version 1 --index 1 %s%s/Test01' %
+ (u_boot_config.build_dir,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_INSTALL_DIR),
+ shell=True)
+ check_call('ls %s/%s' % (MNT_PNT, CAPSULE_INSTALL_DIR), shell=True)
+ check_call('sudo umount %s' % loop_dev, shell=True)
+ check_call('sudo losetup -d %s' % loop_dev, shell=True)
+ except CalledProcessError as exception:
+ assert 'failed to create firmware capsule: %s' % exception.cmd
+
+ # reboot
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ capsule_early = u_boot_config.buildconfig.get(
+ 'config_efi_capsule_on_disk_early')
+ if not capsule_early:
+ with u_boot_console.log.section('Test Case 1-b, after reboot'):
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'env print FW_STATUS'])
+ assert 'Old environment' in ''.join(output)
+
+ output = u_boot_console.run_command('fatls host 0:1 %s'
+ % CAPSULE_INSTALL_DIR)
+ assert 'Test01' in output
+
+ # need to run uefi command to initiate capsule handling
+ output = u_boot_console.run_command(
+ 'env print -e -all Capsule0000')
+
+ # reboot again
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ with u_boot_console.log.section('Test Case 1-c, after reboot'):
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'env print FW_STATUS'])
+ assert 'New environment' in ''.join(output)
+
+ output = u_boot_console.run_command(
+ 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR)
+ assert 'Test01' not in output
+
+ def test_efi_capsule_fw2(
+ self, u_boot_config, u_boot_console, efi_capsule_data):
+ """
+ Test Case 2 - Update U-Boot environment on SPI Flash
+ but with OsIndications unset
+ No update should happen
+ """
+ # "-T" (or "-D") is required to enable spi flash on sandbox
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ disk_img = efi_capsule_data
+ with u_boot_console.log.section('Test Case 2-a, before reboot'):
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
+ 'efidebug boot order 1',
+ 'env set -e OsIndications',
+ 'env set dfu_alt_info sf 0:0=u-boot-env raw 0 0x200000',
+ 'env set FW_STATUS This is Old environment',
+ 'env print FW_STATUS',
+ 'env save'])
+ assert 'Old environment' in ''.join(output)
+
+ output = u_boot_console.run_command_list([
+ 'env set FW_STATUS This is New environment',
+ 'env export -c 5000000',
+ 'fatwrite host 0:1 5000000 %s/%s $filesize'
+ % (CAPSULE_DATA_DIR, FW_BIN),
+ 'env set -e -guid 39b68c46-f7fb-441b-b6ec-16b0f69821f3 Capsule0000',
+ 'fatls host 0:1 %s' % CAPSULE_DATA_DIR
+ ])
+ assert '%s' % FW_BIN in ''.join(output)
+
+ # create a capsule file
+ try:
+ loop_dev = check_output(
+ 'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+ (EFI_BOOTDEV_PART_SIZE, disk_img), shell=True).decode()
+ check_call('sudo mount -t %s -o umask=000 %s %s'
+ % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT), shell=True)
+ check_call(
+ '%s/tools/mkimage -f %s%s/uboot_env.its %s%s/uboot_env.itb' %
+ (u_boot_config.build_dir,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_DATA_DIR),
+ shell=True)
+ check_call(
+ '%s/tools/mkeficapsule --fit %s%s/uboot_env.itb --version 1 --index 1 %s%s/Test01' %
+ (u_boot_config.build_dir,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_INSTALL_DIR),
+ shell=True)
+ check_call('ls %s/%s' % (MNT_PNT, CAPSULE_INSTALL_DIR), shell=True)
+ check_call('sudo umount %s' % loop_dev, shell=True)
+ check_call('sudo losetup -d %s' % loop_dev, shell=True)
+ except CalledProcessError as exception:
+ assert 'failed to create firmware capsule: %s' % exception.cmd
+
+ # reboot
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ capsule_early = u_boot_config.buildconfig.get(
+ 'config_efi_capsule_on_disk_early')
+ if not capsule_early:
+ with u_boot_console.log.section('Test Case 2-b, after reboot'):
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'env print FW_STATUS'])
+ assert 'Old environment' in ''.join(output)
+
+ output = u_boot_console.run_command('fatls host 0:1 %s'
+ % CAPSULE_INSTALL_DIR)
+ assert 'Test01' in output
+
+ # need to run uefi command to initiate capsule handling
+ output = u_boot_console.run_command(
+ 'env print -e -all Capsule0000')
+
+ # reboot again
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ with u_boot_console.log.section('Test Case 2-c, after reboot'):
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'env print FW_STATUS'])
+ assert 'Old environment' in ''.join(output)
+
+ output = u_boot_console.run_command(
+ 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR)
+ assert 'Test01' in output
+
+ def test_efi_capsule_fw3(
+ self, u_boot_config, u_boot_console, efi_capsule_data):
+ """
+ Test Case 3 - Update U-Boot and U-Boot environment on SPI Flash
+ 0x100000-0x150000: U-Boot binary (but dummy)
+ 0x150000-0x200000: U-Boot environment (but dummy)
+ """
+ # "-T" (or "-D") is required to enable spi flash on sandbox
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ disk_img = efi_capsule_data
+ with u_boot_console.log.section('Test Case 3-a, before reboot'):
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
+ 'efidebug boot order 1',
+ 'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
+ 'env set dfu_alt_info sf 0:0=u-boot-bin raw 0x100000 0x50000\;u-boot-env raw 0x150000 0x200000',
+ 'env save'])
+
+ # initialize contents
+ output = u_boot_console.run_command_list(
+ ['sf probe 0:0', 'fatload host 0:1 4000000 %s/u-boot.bin.old' %
+ CAPSULE_DATA_DIR, 'sf write 4000000 100000 10',
+ 'sf read 5000000 100000 10', 'md.b 5000000 10'])
+ assert 'Old' in ''.join(output)
+ output = u_boot_console.run_command_list(
+ ['sf probe 0:0', 'fatload host 0:1 4000000 %s/u-boot.env.old' %
+ CAPSULE_DATA_DIR, 'sf write 4000000 150000 10',
+ 'sf read 5000000 150000 10', 'md.b 5000000 10'])
+ assert 'Old' in ''.join(output)
+
+ # create a capsule file
+ try:
+ loop_dev = check_output(
+ 'sudo losetup -o 1MiB --sizelimit %dMiB --show -f %s | tr -d "\n"' %
+ (EFI_BOOTDEV_PART_SIZE, disk_img), shell=True).decode()
+ check_call('sudo mount -t %s -o umask=000 %s %s'
+ % (EFI_BOOTDEV_FS_TYPE, loop_dev, MNT_PNT), shell=True)
+ check_call(
+ '%s/tools/mkimage -f %s%s/uboot_bin_env.its %s%s/uboot_bin_env.itb' %
+ (u_boot_config.build_dir,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_DATA_DIR),
+ shell=True)
+ check_call(
+ '%s/tools/mkeficapsule --fit %s%s/uboot_bin_env.itb --version 1 --index 1 %s%s/Test01' %
+ (u_boot_config.build_dir,
+ MNT_PNT,
+ CAPSULE_DATA_DIR,
+ MNT_PNT,
+ CAPSULE_INSTALL_DIR),
+ shell=True)
+ check_call('ls -l %s/%s' % (MNT_PNT, CAPSULE_INSTALL_DIR),
+ shell=True)
+ check_call('sudo umount %s' % loop_dev, shell=True)
+ check_call('sudo losetup -d %s' % loop_dev, shell=True)
+ except CalledProcessError as exception:
+ assert 'failed to create firmware capsule: %s' % exception.cmd
+
+ # reboot
+ u_boot_console.restart_uboot_with_flags('-T')
+
+ capsule_early = u_boot_config.buildconfig.get(
+ 'config_efi_capsule_on_disk_early')
+ with u_boot_console.log.section('Test Case 3-b, after reboot'):
+ if not capsule_early:
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
+ assert 'Test01' in ''.join(output)
+
+ # need to run uefi command to initiate capsule handling
+ output = u_boot_console.run_command(
+ 'env print -e -all Capsule0000')
+
+ output = u_boot_console.run_command_list([
+ 'host bind 0 %s' % disk_img,
+ 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
+ assert 'Test01' not in ''.join(output)
+
+ output = u_boot_console.run_command_list([
+ 'sf probe 0:0',
+ 'sf read 4000000 100000 10',
+ 'md.b 4000000 10'])
+ assert 'u-boot:New' in ''.join(output)
+
+ output = u_boot_console.run_command_list([
+ 'sf read 4000000 150000 10',
+ 'md.b 4000000 10'])
+ assert 'u-boot-env:New' in ''.join(output)
diff --git a/test/py/tests/test_efi_capsule/uboot_bin_env.its b/test/py/tests/test_efi_capsule/uboot_bin_env.its
new file mode 100644
index 000000000000..31e2f8049f9a
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/uboot_bin_env.its
@@ -0,0 +1,36 @@
+/*
+ * Automatic software update for U-Boot
+ * Make sure the flashing addresses ('load' prop) is correct for your board!
+ */
+
+/dts-v1/;
+
+/ {
+ description = "Automatic U-Boot environment update";
+ #address-cells = <2>;
+
+ images {
+ u-boot-bin at 100000 {
+ description = "U-Boot binary on SPI Flash";
+ data = /incbin/("BINFILE1");
+ compression = "none";
+ type = "firmware";
+ arch = "sandbox";
+ load = <0>;
+ hash-1 {
+ algo = "sha1";
+ };
+ };
+ u-boot-env at 150000 {
+ description = "U-Boot environment on SPI Flash";
+ data = /incbin/("BINFILE2");
+ compression = "none";
+ type = "firmware";
+ arch = "sandbox";
+ load = <0>;
+ hash-1 {
+ algo = "sha1";
+ };
+ };
+ };
+};
diff --git a/test/py/tests/test_efi_capsule/uboot_env.its b/test/py/tests/test_efi_capsule/uboot_env.its
new file mode 100644
index 000000000000..8e71892c0fae
--- /dev/null
+++ b/test/py/tests/test_efi_capsule/uboot_env.its
@@ -0,0 +1,25 @@
+/*
+ * Automatic software update for U-Boot
+ * Make sure the flashing addresses ('load' prop) is correct for your board!
+ */
+
+/dts-v1/;
+
+/ {
+ description = "Automatic U-Boot environment update";
+ #address-cells = <2>;
+
+ images {
+ u-boot-env at 0 {
+ description = "U-Boot environment on SPI Flash";
+ data = /incbin/("BINFILE");
+ compression = "none";
+ type = "firmware";
+ arch = "sandbox";
+ load = <0>;
+ hash-1 {
+ algo = "sha1";
+ };
+ };
+ };
+};
--
2.27.0
More information about the U-Boot
mailing list