[PATCH 0/7] arm: Juno board updates and PCIe/SATA enablement

[Andre Przywara]

This updates the Arm Juno board to fix a small bug, enable DM_ETH and
also allow the usage of PCIe devices, foremost the on-board SATA
controller.

Patch 1/7 is a "typo" fix for the counter frequency.
Patch 2, 3 and 4 allow to use the smc911x driver with DM_ETH on the
Juno board, that removes the deprecation warning.
Patch 5 allows the sata_sil driver to be used with DM_PCI compliant
host controller drivers. Patch 6 tells U-Boot about the PCIe controller
on the two later revision Juno boards. So far we were initialising the
host bridge, to pave the way for any OS driver, but denied U-Boot itself
to use PCIe devices.
The final patch just enables the sata_sil driver, which allows loading
images from SATA hard drives connected to the on-board ports.

This allows me to boot an off-the-shelf Ubuntu installation using
Grub/EFI from an SSD.

Cheers,
Andre

Andre Przywara (7):
  arm: vexpress64: Fix counter frequency
  net: dm: Remove warning about EEPROM provided MAC address
  net: smc911x: Properly handle EEPROM MAC address
  arm: juno: Enable DM_ETH
  sata_sil: Enable DM_PCI operation
  arm: juno: Enable PCI
  arm: juno: Enable SATA controller

 arch/arm/Kconfig                       |  2 +-
 board/armltd/vexpress64/pcie.c         | 14 +++---
 board/armltd/vexpress64/vexpress64.c   |  2 +
 configs/vexpress_aemv8a_juno_defconfig | 10 ++++-
 drivers/ata/sata_sil.c                 | 11 ++++-
 drivers/ata/sata_sil.h                 |  6 ++-
 drivers/net/smc911x.c                  | 60 +++++++++++++++-----------
 include/configs/vexpress_aemv8a.h      |  2 +-
 net/eth-uclass.c                       |  2 -
 9 files changed, 72 insertions(+), 37 deletions(-)

-- 
2.17.5