[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware
Nicolas Saenz Julienne
nsaenzjulienne at suse.de
Mon Jun 1 12:47:18 CEST 2020
On Tue, 2020-05-05 at 18:26 +0200, Nicolas Saenz Julienne wrote:
> Newer revisions of the RPi4 need their xHCI chip, VL805, firmware to be
> loaded explicitly. Earlier versions didn't need that as they where using
> an EEPROM for that purpose. This series takes care of setting up the
> relevant infrastructure and run the firmware loading routine at the
> right moment.
> Note that this builds on top of Sylwester Nawrocki's "USB host support
> for Raspberry Pi 4 board" series.
Please don't forget about this series. The new 8GB RPi4 contains this HW design
change and USB will not work without it. See this discussion on the downstream
kernel github, where other OS/bootloaders are hitting the issue:
Otherwise, the Linux version of this is already in linux-next:
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 488 bytes
Desc: This is a digitally signed message part
More information about the U-Boot