[PATCH v2 15/23] ti: Drop panda board
Lokesh Vutla
lokeshvutla at ti.com
Fri Jun 5 06:31:27 CEST 2020
Hi Jagan,
On 27/05/20 6:26 pm, Jagan Teki wrote:
> DM, DM_SPI and other driver model migration deadlines
> are expired for this board.
>
> Drop it.
>
> Cc: Lokesh Vutla <lokeshvutla at ti.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Please hold this patch. I see patches in ML for converting to DM
https://patchwork.ozlabs.org/project/uboot/list/?series=180809
Thanks and regards,
Lokesh
> ---
> Changes for v2:
> - none
>
> arch/arm/mach-omap2/omap4/Kconfig | 4 -
> board/ti/panda/Kconfig | 12 --
> board/ti/panda/MAINTAINERS | 6 -
> board/ti/panda/Makefile | 6 -
> board/ti/panda/panda.c | 346 ------------------------------
> board/ti/panda/panda_mux_data.h | 86 --------
> configs/omap4_panda_defconfig | 42 ----
> include/configs/omap4_panda.h | 34 ---
> 8 files changed, 536 deletions(-)
> delete mode 100644 board/ti/panda/Kconfig
> delete mode 100644 board/ti/panda/MAINTAINERS
> delete mode 100644 board/ti/panda/Makefile
> delete mode 100644 board/ti/panda/panda.c
> delete mode 100644 board/ti/panda/panda_mux_data.h
> delete mode 100644 configs/omap4_panda_defconfig
> delete mode 100644 include/configs/omap4_panda.h
>
> diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig
> index 899289b645..4cc360f38a 100644
> --- a/arch/arm/mach-omap2/omap4/Kconfig
> +++ b/arch/arm/mach-omap2/omap4/Kconfig
> @@ -4,9 +4,6 @@ choice
> prompt "OMAP4 board select"
> optional
>
> -config TARGET_OMAP4_PANDA
> - bool "TI OMAP4 PandaBoard"
> -
> config TARGET_OMAP4_SDP4430
> bool "TI OMAP4 SDP4430"
>
> @@ -18,7 +15,6 @@ endchoice
> config SYS_SOC
> default "omap4"
>
> -source "board/ti/panda/Kconfig"
> source "board/ti/sdp4430/Kconfig"
> source "board/amazon/kc1/Kconfig"
>
> diff --git a/board/ti/panda/Kconfig b/board/ti/panda/Kconfig
> deleted file mode 100644
> index 8f277b612a..0000000000
> --- a/board/ti/panda/Kconfig
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -if TARGET_OMAP4_PANDA
> -
> -config SYS_BOARD
> - default "panda"
> -
> -config SYS_VENDOR
> - default "ti"
> -
> -config SYS_CONFIG_NAME
> - default "omap4_panda"
> -
> -endif
> diff --git a/board/ti/panda/MAINTAINERS b/board/ti/panda/MAINTAINERS
> deleted file mode 100644
> index 2142368271..0000000000
> --- a/board/ti/panda/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -PANDA BOARD
> -M: Lokesh Vutla <lokeshvutla at ti.com>
> -S: Maintained
> -F: board/ti/panda/
> -F: include/configs/omap4_panda.h
> -F: configs/omap4_panda_defconfig
> diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
> deleted file mode 100644
> index dd2ff33afa..0000000000
> --- a/board/ti/panda/Makefile
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# (C) Copyright 2000, 2001, 2002
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -
> -obj-y := panda.o
> diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
> deleted file mode 100644
> index 9ebecfdbf5..0000000000
> --- a/board/ti/panda/panda.c
> +++ /dev/null
> @@ -1,346 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * (C) Copyright 2010
> - * Texas Instruments Incorporated, <www.ti.com>
> - * Steve Sakoman <steve at sakoman.com>
> - */
> -#include <common.h>
> -#include <init.h>
> -#include <log.h>
> -#include <net.h>
> -#include <asm/mach-types.h>
> -#include <asm/arch/sys_proto.h>
> -#include <asm/arch/mmc_host_def.h>
> -#include <asm/arch/clock.h>
> -#include <asm/arch/gpio.h>
> -#include <asm/gpio.h>
> -#include <env.h>
> -#include <twl6030.h>
> -
> -#include "panda_mux_data.h"
> -
> -#ifdef CONFIG_USB_EHCI_HCD
> -#include <usb.h>
> -#include <asm/arch/ehci.h>
> -#include <asm/ehci-omap.h>
> -#endif
> -
> -#define PANDA_ULPI_PHY_TYPE_GPIO 182
> -#define PANDA_BOARD_ID_1_GPIO 101
> -#define PANDA_ES_BOARD_ID_1_GPIO 48
> -#define PANDA_BOARD_ID_2_GPIO 171
> -#define PANDA_ES_BOARD_ID_3_GPIO 3
> -#define PANDA_ES_BOARD_ID_4_GPIO 2
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -const struct omap_sysinfo sysinfo = {
> - "Board: OMAP4 Panda\n"
> -};
> -
> -struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
> -
> -/**
> - * @brief board_init
> - *
> - * @return 0
> - */
> -int board_init(void)
> -{
> - gpmc_init();
> -
> - gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA;
> - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
> -
> - return 0;
> -}
> -
> -int board_eth_init(bd_t *bis)
> -{
> - return 0;
> -}
> -
> -/*
> -* Routine: get_board_revision
> -* Description: Detect if we are running on a panda revision A1-A6,
> -* or an ES panda board. This can be done by reading
> -* the level of GPIOs and checking the processor revisions.
> -* This should result in:
> -* Panda 4430:
> -* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
> -* GPIO171, GPIO101, GPIO182: 1 0 1 => A6
> -* Panda ES:
> -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
> -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3
> -*/
> -int get_board_revision(void)
> -{
> - int board_id0, board_id1, board_id2;
> - int board_id3, board_id4;
> - int board_id;
> -
> - int processor_rev = omap_revision();
> -
> - /* Setup the mux for the common board ID pins (gpio 171 and 182) */
> - writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
> - writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
> -
> - board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
> - board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
> -
> - if ((processor_rev >= OMAP4460_ES1_0 &&
> - processor_rev <= OMAP4460_ES1_1)) {
> - /*
> - * Setup the mux for the ES specific board ID pins (gpio 101,
> - * 2 and 3.
> - */
> - writew((IEN | M3), (*ctrl)->control_padconf_core_base +
> - GPMC_A24);
> - writew((IEN | M3), (*ctrl)->control_padconf_core_base +
> - UNIPRO_RY0);
> - writew((IEN | M3), (*ctrl)->control_padconf_core_base +
> - UNIPRO_RX1);
> -
> - board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);
> - board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);
> - board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
> -
> -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> - env_set("board_name", "panda-es");
> -#endif
> - board_id = ((board_id4 << 4) | (board_id3 << 3) |
> - (board_id2 << 2) | (board_id1 << 1) | (board_id0));
> - } else {
> - /* Setup the mux for the Ax specific board ID pins (gpio 101) */
> - writew((IEN | M3), (*ctrl)->control_padconf_core_base +
> - FREF_CLK2_OUT);
> -
> - board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);
> - board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));
> -
> -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> - if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
> - env_set("board_name", "panda-a4");
> -#endif
> - }
> -
> - return board_id;
> -}
> -
> -/**
> - * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
> - *
> - *
> - * Detect if we are running on B3 version of ES panda board,
> - * This can be done by reading the level of GPIO 171 and checking the
> - * processor revisions.
> - * GPIO171: 1 => Panda ES Rev B3
> - *
> - * Return : return 1 if Panda ES Rev B3 , else return 0
> - */
> -u8 is_panda_es_rev_b3(void)
> -{
> - int processor_rev = omap_revision();
> - int ret = 0;
> -
> - if ((processor_rev >= OMAP4460_ES1_0 &&
> - processor_rev <= OMAP4460_ES1_1)) {
> -
> - /* Setup the mux for the common board ID pins (gpio 171) */
> - writew((IEN | M3),
> - (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
> -
> - /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
> - ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
> - }
> - return ret;
> -}
> -
> -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
> -/*
> - * emif_get_reg_dump() - emif_get_reg_dump strong function
> - *
> - * @emif_nr - emif base
> - * @regs - reg dump of timing values
> - *
> - * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
> - */
> -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
> -{
> - u32 omap4_rev = omap_revision();
> -
> - /* Same devices and geometry on both EMIFs */
> - if (omap4_rev == OMAP4430_ES1_0)
> - *regs = &emif_regs_elpida_380_mhz_1cs;
> - else if (omap4_rev == OMAP4430_ES2_0)
> - *regs = &emif_regs_elpida_200_mhz_2cs;
> - else if (omap4_rev == OMAP4430_ES2_3)
> - *regs = &emif_regs_elpida_400_mhz_1cs;
> - else if (omap4_rev < OMAP4470_ES1_0) {
> - if(is_panda_es_rev_b3())
> - *regs = &emif_regs_elpida_400_mhz_1cs;
> - else
> - *regs = &emif_regs_elpida_400_mhz_2cs;
> - }
> - else
> - *regs = &emif_regs_elpida_400_mhz_1cs;
> -}
> -
> -void emif_get_dmm_regs(const struct dmm_lisa_map_regs
> - **dmm_lisa_regs)
> -{
> - u32 omap_rev = omap_revision();
> -
> - if (omap_rev == OMAP4430_ES1_0)
> - *dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
> - else if (omap_rev == OMAP4430_ES2_3)
> - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
> - else if (omap_rev < OMAP4460_ES1_0)
> - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
> - else
> - *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
> -}
> -
> -#endif
> -
> -/**
> - * @brief misc_init_r - Configure Panda board specific configurations
> - * such as power configurations, ethernet initialization as phase2 of
> - * boot sequence
> - *
> - * @return 0
> - */
> -int misc_init_r(void)
> -{
> - int phy_type;
> - u32 auxclk, altclksrc;
> -
> - /* EHCI is not supported on ES1.0 */
> - if (omap_revision() == OMAP4430_ES1_0)
> - return 0;
> -
> - get_board_revision();
> -
> - gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
> - phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
> -
> - if (phy_type == 1) {
> - /* ULPI PHY supplied by auxclk3 derived from sys_clk */
> - debug("ULPI PHY supplied by auxclk3\n");
> -
> - auxclk = readl(&scrm->auxclk3);
> - /* Select sys_clk */
> - auxclk &= ~AUXCLK_SRCSELECT_MASK;
> - auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
> - /* Set the divisor to 2 */
> - auxclk &= ~AUXCLK_CLKDIV_MASK;
> - auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
> - /* Request auxilary clock #3 */
> - auxclk |= AUXCLK_ENABLE_MASK;
> -
> - writel(auxclk, &scrm->auxclk3);
> - } else {
> - /* ULPI PHY supplied by auxclk1 derived from PER dpll */
> - debug("ULPI PHY supplied by auxclk1\n");
> -
> - auxclk = readl(&scrm->auxclk1);
> - /* Select per DPLL */
> - auxclk &= ~AUXCLK_SRCSELECT_MASK;
> - auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT;
> - /* Set the divisor to 16 */
> - auxclk &= ~AUXCLK_CLKDIV_MASK;
> - auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT;
> - /* Request auxilary clock #3 */
> - auxclk |= AUXCLK_ENABLE_MASK;
> -
> - writel(auxclk, &scrm->auxclk1);
> - }
> -
> - altclksrc = readl(&scrm->altclksrc);
> -
> - /* Activate alternate system clock supplier */
> - altclksrc &= ~ALTCLKSRC_MODE_MASK;
> - altclksrc |= ALTCLKSRC_MODE_ACTIVE;
> -
> - /* enable clocks */
> - altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
> -
> - writel(altclksrc, &scrm->altclksrc);
> -
> - omap_die_id_usbethaddr();
> -
> - return 0;
> -}
> -
> -void set_muxconf_regs(void)
> -{
> - do_set_mux((*ctrl)->control_padconf_core_base,
> - core_padconf_array_essential,
> - sizeof(core_padconf_array_essential) /
> - sizeof(struct pad_conf_entry));
> -
> - do_set_mux((*ctrl)->control_padconf_wkup_base,
> - wkup_padconf_array_essential,
> - sizeof(wkup_padconf_array_essential) /
> - sizeof(struct pad_conf_entry));
> -
> - if (omap_revision() >= OMAP4460_ES1_0)
> - do_set_mux((*ctrl)->control_padconf_wkup_base,
> - wkup_padconf_array_essential_4460,
> - sizeof(wkup_padconf_array_essential_4460) /
> - sizeof(struct pad_conf_entry));
> -}
> -
> -#if defined(CONFIG_MMC)
> -int board_mmc_init(bd_t *bis)
> -{
> - return omap_mmc_init(0, 0, 0, -1, -1);
> -}
> -
> -#if !defined(CONFIG_SPL_BUILD)
> -void board_mmc_power_init(void)
> -{
> - twl6030_power_mmc_init(0);
> -}
> -#endif
> -#endif
> -
> -#ifdef CONFIG_USB_EHCI_HCD
> -
> -static struct omap_usbhs_board_data usbhs_bdata = {
> - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
> - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
> - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
> -};
> -
> -int ehci_hcd_init(int index, enum usb_init_type init,
> - struct ehci_hccr **hccr, struct ehci_hcor **hcor)
> -{
> - int ret;
> - unsigned int utmi_clk;
> -
> - /* Now we can enable our port clocks */
> - utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
> - utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
> - setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
> -
> - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
> - if (ret < 0)
> - return ret;
> -
> - return 0;
> -}
> -
> -int ehci_hcd_stop(int index)
> -{
> - return omap_ehci_hcd_stop();
> -}
> -#endif
> -
> -/*
> - * get_board_rev() - get board revision
> - */
> -u32 get_board_rev(void)
> -{
> - return 0x20;
> -}
> diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
> deleted file mode 100644
> index ad9e36525b..0000000000
> --- a/board/ti/panda/panda_mux_data.h
> +++ /dev/null
> @@ -1,86 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2010
> - * Texas Instruments Incorporated, <www.ti.com>
> - *
> - * Balaji Krishnamoorthy <balajitk at ti.com>
> - * Aneesh V <aneesh at ti.com>
> - */
> -#ifndef _PANDA_MUX_DATA_H_
> -#define _PANDA_MUX_DATA_H_
> -
> -#include <asm/arch/mux_omap4.h>
> -
> -
> -const struct pad_conf_entry core_padconf_array_essential[] = {
> -
> -{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
> -{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
> -{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
> -{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
> -{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
> -{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
> -{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
> -{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
> -{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
> -{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
> -{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
> -{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
> -{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
> -{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
> -{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
> -{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
> -{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
> -{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
> -{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
> -{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
> -{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
> -{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
> -{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
> -{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
> -{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
> -{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
> -{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
> -{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
> -{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
> -{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
> -{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
> -{UART3_TX_IRTX, (M0)}, /* uart3_tx */
> -{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
> -{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
> -{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
> -{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
> -{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
> -{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
> -{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
> -{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
> -{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
> -{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
> -{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
> -{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
> -{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
> -{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
> -{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
> -{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
> -{UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
> -{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
> -{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
> -
> -};
> -
> -const struct pad_conf_entry wkup_padconf_array_essential[] = {
> -
> -{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
> -{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
> -{PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
> -{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
> -
> -};
> -
> -const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
> -
> -{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */
> -
> -};
> -
> -#endif /* _PANDA_MUX_DATA_H_ */
> diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig
> deleted file mode 100644
> index 3ac6319d2d..0000000000
> --- a/configs/omap4_panda_defconfig
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_ARCH_OMAP2PLUS=y
> -CONFIG_OMAP44XX=y
> -CONFIG_TARGET_OMAP4_PANDA=y
> -CONFIG_SPL=y
> -CONFIG_SPL_TEXT_BASE=0x40300000
> -CONFIG_DISTRO_DEFAULTS=y
> -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
> -CONFIG_SYS_CONSOLE_IS_IN_ENV=y
> -CONFIG_SYS_CONSOLE_INFO_QUIET=y
> -CONFIG_VERSION_VARIABLE=y
> -# CONFIG_SPL_FS_EXT4 is not set
> -# CONFIG_SPL_I2C_SUPPORT is not set
> -# CONFIG_SPL_NAND_SUPPORT is not set
> -CONFIG_SPL_OS_BOOT=y
> -CONFIG_CMD_SPL=y
> -CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_GPIO=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SPI=y
> -CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -# CONFIG_CMD_NFS is not set
> -CONFIG_CMD_EXT4_WRITE=y
> -CONFIG_ENV_IS_IN_FAT=y
> -CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
> -CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> -CONFIG_MMC_OMAP_HS=y
> -CONFIG_CONS_INDEX=3
> -CONFIG_SYS_NS16550=y
> -CONFIG_SPI=y
> -CONFIG_OMAP3_SPI=y
> -CONFIG_USB=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_MUSB_UDC=y
> -CONFIG_USB_OMAP3=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_HOST_ETHER=y
> -CONFIG_USB_ETHER_SMSC95XX=y
> -CONFIG_OF_LIBFDT=y
> diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
> deleted file mode 100644
> index 835b7c299e..0000000000
> --- a/include/configs/omap4_panda.h
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2010
> - * Texas Instruments Incorporated.
> - * Steve Sakoman <steve at sakoman.com>
> - *
> - * Configuration settings for the TI OMAP4 Panda board.
> - * See ti_omap4_common.h for OMAP4 common part
> - */
> -
> -#ifndef __CONFIG_PANDA_H
> -#define __CONFIG_PANDA_H
> -
> -/*
> - * High Level Configuration Options
> - */
> -
> -/* USB UHH support options */
> -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
> -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
> -
> -/* USB Networking options */
> -
> -#define CONFIG_UBOOT_ENABLE_PADS_ALL
> -
> -#include <configs/ti_omap4_common.h>
> -
> -/* GPIO */
> -
> -/* ENV related config options */
> -
> -#define CONFIG_ENV_OVERWRITE
> -
> -#endif /* __CONFIG_PANDA_H */
>
More information about the U-Boot
mailing list