[PATCH v4 05/14] dtoc: add option to disable warnings

Walter Lozano walter.lozano at collabora.com
Thu Jun 25 06:10:08 CEST 2020


As dtoc now performs checks for valid driver names, when running dtoc
tests several warnings arise as these tests don't use valid driver
names.

This patch adds an option to disable those warning, which is only
intended for running tests.

Signed-off-by: Walter Lozano <walter.lozano at collabora.com>
---

 tools/dtoc/dtb_platdata.py              | 13 ++--
 tools/dtoc/dtoc_test_invalid_driver.dts | 15 ++++
 tools/dtoc/test_dtoc.py                 | 91 +++++++++++++++++--------
 3 files changed, 85 insertions(+), 34 deletions(-)
 create mode 100644 tools/dtoc/dtoc_test_invalid_driver.dts

diff --git a/tools/dtoc/dtb_platdata.py b/tools/dtoc/dtb_platdata.py
index ae8674d85c..d0cd4bf9bd 100644
--- a/tools/dtoc/dtb_platdata.py
+++ b/tools/dtoc/dtb_platdata.py
@@ -141,6 +141,7 @@ class DtbPlatdata(object):
         _valid_nodes: A list of Node object with compatible strings
         _include_disabled: true to include nodes marked status = "disabled"
         _outfile: The current output file (sys.stdout or a real file)
+        _warning_disabled: true to disable warnings about driver names not found
         _lines: Stashed list of output lines for outputting in the future
         _aliases: Dict that hold aliases for compatible strings
             key: First compatible string declared in a node
@@ -151,12 +152,13 @@ class DtbPlatdata(object):
                 U_BOOT_DRIVER_ALIAS(driver_alias, driver_name)
             value: Driver name declared with U_BOOT_DRIVER(driver_name)
     """
-    def __init__(self, dtb_fname, include_disabled):
+    def __init__(self, dtb_fname, include_disabled, warning_disabled):
         self._fdt = None
         self._dtb_fname = dtb_fname
         self._valid_nodes = None
         self._include_disabled = include_disabled
         self._outfile = None
+        self._warning_disabled = warning_disabled
         self._lines = []
         self._aliases = {}
         self._drivers = []
@@ -184,8 +186,9 @@ class DtbPlatdata(object):
             compat_c_old = compat_c
             compat_c = self._driver_aliases.get(compat_c)
             if not compat_c:
-                print('WARNING: the driver %s was not found in the driver list'
-                      % (compat_c_old))
+                if not self._warning_disabled:
+                    print('WARNING: the driver %s was not found in the driver list'
+                          % (compat_c_old))
                 compat_c = compat_c_old
             else:
                 aliases_c = [compat_c_old] + aliases_c
@@ -634,7 +637,7 @@ class DtbPlatdata(object):
             nodes_to_output.remove(node)
 
 
-def run_steps(args, dtb_file, include_disabled, output):
+def run_steps(args, dtb_file, include_disabled, output, warning_disabled=False):
     """Run all the steps of the dtoc tool
 
     Args:
@@ -646,7 +649,7 @@ def run_steps(args, dtb_file, include_disabled, output):
     if not args:
         raise ValueError('Please specify a command: struct, platdata')
 
-    plat = DtbPlatdata(dtb_file, include_disabled)
+    plat = DtbPlatdata(dtb_file, include_disabled, warning_disabled)
     plat.scan_drivers()
     plat.scan_dtb()
     plat.scan_tree()
diff --git a/tools/dtoc/dtoc_test_invalid_driver.dts b/tools/dtoc/dtoc_test_invalid_driver.dts
new file mode 100644
index 0000000000..914ac3e899
--- /dev/null
+++ b/tools/dtoc/dtoc_test_invalid_driver.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test device tree file for dtoc
+ *
+ * Copyright 2017 Google, Inc
+ */
+
+/dts-v1/;
+
+/ {
+	spl-test {
+		u-boot,dm-pre-reloc;
+		compatible = "invalid";
+	};
+};
diff --git a/tools/dtoc/test_dtoc.py b/tools/dtoc/test_dtoc.py
index 91fc9d77f3..ae3ec509c1 100755
--- a/tools/dtoc/test_dtoc.py
+++ b/tools/dtoc/test_dtoc.py
@@ -12,6 +12,7 @@ tool.
 import collections
 import os
 import struct
+import sys
 import unittest
 
 from dtoc import dtb_platdata
@@ -101,6 +102,10 @@ class TestDtoc(unittest.TestCase):
             print('Failures written to /tmp/binman.{expected,actual}')
         self.assertEquals(expected, actual)
 
+
+    def run_test(self, args, dtb_file, output):
+        dtb_platdata.run_steps(args, dtb_file, False, output, True)
+
     def test_name(self):
         """Test conversion of device tree names to C identifiers"""
         self.assertEqual('serial_at_0x12', conv_name_to_c('serial at 0x12'))
@@ -154,12 +159,12 @@ class TestDtoc(unittest.TestCase):
         """Test output from a device tree file with no nodes"""
         dtb_file = get_dtb_file('dtoc_test_empty.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             lines = infile.read().splitlines()
         self.assertEqual(HEADER.splitlines(), lines)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             lines = infile.read().splitlines()
         self.assertEqual(C_HEADER.splitlines() + [''], lines)
@@ -168,7 +173,7 @@ class TestDtoc(unittest.TestCase):
         """Test output from some simple nodes with various types of data"""
         dtb_file = get_dtb_file('dtoc_test_simple.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -193,7 +198,7 @@ struct dtd_sandbox_spl_test_2 {
 };
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -272,7 +277,7 @@ U_BOOT_DEVICE(pmic_at_9) = {
         """Test output from a device tree file with a driver alias"""
         dtb_file = get_dtb_file('dtoc_test_driver_alias.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -284,7 +289,7 @@ struct dtd_sandbox_gpio {
 #define dtd_sandbox_gpio_alias dtd_sandbox_gpio
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -299,13 +304,41 @@ U_BOOT_DEVICE(gpios_at_0) = {
 \t.platdata_size\t= sizeof(dtv_gpios_at_0),
 };
 
+''', data)
+
+    def test_invalid_driver(self):
+        """Test output from a device tree file with an invalid driver"""
+        dtb_file = get_dtb_file('dtoc_test_invalid_driver.dts')
+        output = tools.GetOutputFilename('output')
+        with test_util.capture_sys_output() as (stdout, stderr):
+            dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        with open(output) as infile:
+            data = infile.read()
+        self._CheckStrings(HEADER + '''
+struct dtd_invalid {
+};
+''', data)
+
+        with test_util.capture_sys_output() as (stdout, stderr):
+            dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        with open(output) as infile:
+            data = infile.read()
+        self._CheckStrings(C_HEADER + '''
+static const struct dtd_invalid dtv_spl_test = {
+};
+U_BOOT_DEVICE(spl_test) = {
+\t.name\t\t= "invalid",
+\t.platdata\t= &dtv_spl_test,
+\t.platdata_size\t= sizeof(dtv_spl_test),
+};
+
 ''', data)
 
     def test_phandle(self):
         """Test output from a node containing a phandle reference"""
         dtb_file = get_dtb_file('dtoc_test_phandle.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -317,7 +350,7 @@ struct dtd_target {
 };
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -377,7 +410,7 @@ U_BOOT_DEVICE(phandle_source2) = {
         """Test output from a node containing a phandle reference"""
         dtb_file = get_dtb_file('dtoc_test_phandle_single.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -393,7 +426,7 @@ struct dtd_target {
         """Test that phandle targets are generated before their references"""
         dtb_file = get_dtb_file('dtoc_test_phandle_reorder.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -423,7 +456,7 @@ U_BOOT_DEVICE(phandle_source2) = {
                                 capture_stderr=True)
         output = tools.GetOutputFilename('output')
         with self.assertRaises(ValueError) as e:
-            dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+            self.run_test(['struct'], dtb_file, output)
         self.assertIn("Cannot parse 'clocks' in node 'phandle-source'",
                       str(e.exception))
 
@@ -433,7 +466,7 @@ U_BOOT_DEVICE(phandle_source2) = {
                                 capture_stderr=True)
         output = tools.GetOutputFilename('output')
         with self.assertRaises(ValueError) as e:
-            dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+            self.run_test(['struct'], dtb_file, output)
         self.assertIn("Node 'phandle-target' has no '#clock-cells' property",
                       str(e.exception))
 
@@ -441,7 +474,7 @@ U_BOOT_DEVICE(phandle_source2) = {
         """Test output from a node with multiple compatible strings"""
         dtb_file = get_dtb_file('dtoc_test_aliases.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -452,7 +485,7 @@ struct dtd_compat1 {
 #define dtd_compat3 dtd_compat1
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -471,7 +504,7 @@ U_BOOT_DEVICE(spl_test) = {
         """Test output from a node with a 'reg' property with na=2, ns=2"""
         dtb_file = get_dtb_file('dtoc_test_addr64.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -486,7 +519,7 @@ struct dtd_test3 {
 };
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -523,7 +556,7 @@ U_BOOT_DEVICE(test3) = {
         """Test output from a node with a 'reg' property with na=1, ns=1"""
         dtb_file = get_dtb_file('dtoc_test_addr32.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -535,7 +568,7 @@ struct dtd_test2 {
 };
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -563,7 +596,7 @@ U_BOOT_DEVICE(test2) = {
         """Test output from a node with a 'reg' property with na=2, ns=1"""
         dtb_file = get_dtb_file('dtoc_test_addr64_32.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -578,7 +611,7 @@ struct dtd_test3 {
 };
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -615,7 +648,7 @@ U_BOOT_DEVICE(test3) = {
         """Test output from a node with a 'reg' property with na=1, ns=2"""
         dtb_file = get_dtb_file('dtoc_test_addr32_64.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -630,7 +663,7 @@ struct dtd_test3 {
 };
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -669,7 +702,7 @@ U_BOOT_DEVICE(test3) = {
         dtb_file = get_dtb_file('dtoc_test_bad_reg.dts', capture_stderr=True)
         output = tools.GetOutputFilename('output')
         with self.assertRaises(ValueError) as e:
-            dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+            self.run_test(['struct'], dtb_file, output)
         self.assertIn("Node 'spl-test' reg property is not an int",
                       str(e.exception))
 
@@ -679,7 +712,7 @@ U_BOOT_DEVICE(test3) = {
         dtb_file = get_dtb_file('dtoc_test_bad_reg2.dts', capture_stderr=True)
         output = tools.GetOutputFilename('output')
         with self.assertRaises(ValueError) as e:
-            dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+            self.run_test(['struct'], dtb_file, output)
         self.assertIn("Node 'spl-test' reg property has 3 cells which is not a multiple of na + ns = 1 + 1)",
                       str(e.exception))
 
@@ -687,7 +720,7 @@ U_BOOT_DEVICE(test3) = {
         """Test that a subequent node can add a new property to a struct"""
         dtb_file = get_dtb_file('dtoc_test_add_prop.dts')
         output = tools.GetOutputFilename('output')
-        dtb_platdata.run_steps(['struct'], dtb_file, False, output)
+        self.run_test(['struct'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(HEADER + '''
@@ -697,7 +730,7 @@ struct dtd_sandbox_spl_test {
 };
 ''', data)
 
-        dtb_platdata.run_steps(['platdata'], dtb_file, False, output)
+        self.run_test(['platdata'], dtb_file, output)
         with open(output) as infile:
             data = infile.read()
         self._CheckStrings(C_HEADER + '''
@@ -725,12 +758,12 @@ U_BOOT_DEVICE(spl_test2) = {
         """Test output to stdout"""
         dtb_file = get_dtb_file('dtoc_test_simple.dts')
         with test_util.capture_sys_output() as (stdout, stderr):
-            dtb_platdata.run_steps(['struct'], dtb_file, False, '-')
+            self.run_test(['struct'], dtb_file, '-')
 
     def testNoCommand(self):
         """Test running dtoc without a command"""
         with self.assertRaises(ValueError) as e:
-            dtb_platdata.run_steps([], '', False, '')
+            self.run_test([], '', '')
         self.assertIn("Please specify a command: struct, platdata",
                       str(e.exception))
 
@@ -739,6 +772,6 @@ U_BOOT_DEVICE(spl_test2) = {
         dtb_file = get_dtb_file('dtoc_test_simple.dts')
         output = tools.GetOutputFilename('output')
         with self.assertRaises(ValueError) as e:
-            dtb_platdata.run_steps(['invalid-cmd'], dtb_file, False, output)
+            self.run_test(['invalid-cmd'], dtb_file, output)
         self.assertIn("Unknown command 'invalid-cmd': (use: struct, platdata)",
                       str(e.exception))
-- 
2.20.1



More information about the U-Boot mailing list