[PATCH v2 1/3] watchdog: Add support for K3 RTI watchdog

[Jan Kiszka]

On 23.06.20 13:47, Lokesh Vutla wrote:
> 
> 
> On 23/06/20 4:45 pm, Jan Kiszka wrote:
>> From: Jan Kiszka <jan.kiszka at siemens.com>
>>
>> This is based on the Linux kernel driver for the RTI watchdog.
>>
>> To actually reset the system on an AM65x, it requires firmware running
>> on the R5 that accepts the NMI and issues the actual system reset via
>> TISCI. Kind of an iTCO, except that this watchdog hardware has support
>> for no-way-out, and only for that.
>>
>> On the J721E, reset works without extra firmware help when routing the
>> RTI interrupt via the ESM.
>>
>> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
>> ---
>>   drivers/watchdog/Kconfig   |   7 +++
>>   drivers/watchdog/Makefile  |   1 +
>>   drivers/watchdog/rti_wdt.c | 123 +++++++++++++++++++++++++++++++++++++
>>   3 files changed, 131 insertions(+)
>>   create mode 100644 drivers/watchdog/rti_wdt.c
>>
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>> index bf06180cdd..ee99bd2af1 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -155,6 +155,13 @@ config WDT_ORION
>>   	  Select this to enable Orion watchdog timer, which can be found on some
>>   	  Marvell Armada chips.
>>   
>> +config WDT_K3_RTI
>> +	bool "Texas Instruments K3 RTI watchdog"
>> +	depends on WDT && ARCH_K3
>> +	help
>> +	  Say Y here if you want to include support for the K3 watchdog
>> +	  timer (RTI module) available in the K3 generation of processors.
>> +
>>   config WDT_SANDBOX
>>   	bool "Enable Watchdog Timer support for Sandbox"
>>   	depends on SANDBOX && WDT
>> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
>> index 519bbd3a40..16bdbf4970 100644
>> --- a/drivers/watchdog/Makefile
>> +++ b/drivers/watchdog/Makefile
>> @@ -27,6 +27,7 @@ obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
>>   obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
>>   obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
>>   obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
>> +obj-$(CONFIG_WDT_K3_RTI) += rti_wdt.o
>>   obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
>>   obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
>>   obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
>> diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
>> new file mode 100644
>> index 0000000000..ebe29c7409
>> --- /dev/null
>> +++ b/drivers/watchdog/rti_wdt.c
>> @@ -0,0 +1,123 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (c) Siemens AG, 2020
>> + *
>> + * Authors:
>> + *   Jan Kiszka <jan.kiszka at siemens.com>
>> + *
>> + * Derived from linux/drivers/watchdog/rti_wdt.c
>> + */
>> +
>> +#include <common.h>
>> +#include <clk.h>
>> +#include <dm.h>
>> +#include <power-domain.h>
>> +#include <wdt.h>
>> +#include <asm/io.h>
>> +
>> +/* Timer register set definition */
>> +#define RTIDWDCTRL		0x90
>> +#define RTIDWDPRLD		0x94
>> +#define RTIWDSTATUS		0x98
>> +#define RTIWDKEY		0x9c
>> +#define RTIDWDCNTR		0xa0
>> +#define RTIWWDRXCTRL		0xa4
>> +#define RTIWWDSIZECTRL		0xa8
>> +
>> +#define RTIWWDRX_NMI		0xa
>> +
>> +#define RTIWWDSIZE_50P		0x50
>> +
>> +#define WDENABLE_KEY		0xa98559da
>> +
>> +#define WDKEY_SEQ0		0xe51a
>> +#define WDKEY_SEQ1		0xa35c
>> +
>> +#define WDT_PRELOAD_SHIFT	13
>> +
>> +#define WDT_PRELOAD_MAX		0xfff
>> +
>> +struct rti_wdt_priv {
>> +	phys_addr_t regs;
>> +	unsigned int clk_khz;
>> +};
>> +
>> +static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
>> +{
>> +	struct rti_wdt_priv *priv = dev_get_priv(dev);
>> +	u32 timer_margin;
>> +	int ret;
>> +
>> +	if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY)
>> +		return -EBUSY;
>> +
>> +	timer_margin = timeout_ms * priv->clk_khz / 1000;
>> +	timer_margin >>= WDT_PRELOAD_SHIFT;
>> +	if (timer_margin > WDT_PRELOAD_MAX)
>> +		timer_margin = WDT_PRELOAD_MAX;
>> +
>> +	writel(timer_margin, priv->regs + RTIDWDPRLD);
>> +	writel(RTIWWDRX_NMI, priv->regs + RTIWWDRXCTRL);
>> +	writel(RTIWWDSIZE_50P, priv->regs + RTIWWDSIZECTRL);
>> +
>> +	readl(priv->regs + RTIWWDSIZECTRL);
>> +
>> +	writel(WDENABLE_KEY, priv->regs + RTIDWDCTRL);
> 
> What happens if the watchdog timer expires in U-Boot?
> 

Then we reset. You can feed the watchdog also from U-Boot, just enable 
CONFIG_WATCHDOG.

> Is the watchdog started from U-Boot command line?
> 

U-Boot automatically starts the first watchdog it finds. I didn't find a 
switch to disable that. If you have multiple watchdogs, you can start 
others also via "wdt".

>> +
>> +	return 0;
>> +}
>> +
>> +static int rti_wdt_reset(struct udevice *dev)
>> +{
>> +	struct rti_wdt_priv *priv = dev_get_priv(dev);
>> +	u32 prld;
>> +
>> +	/* Make sure we do not reset too early */
>> +	prld = readl(priv->regs + RTIDWDPRLD) << WDT_PRELOAD_SHIFT;
>> +	if (readl(priv->regs + RTIDWDCNTR) >= prld / 2)
>> +		return -EPERM;
>> +
>> +	writel(WDKEY_SEQ0, priv->regs + RTIWDKEY);
>> +	writel(WDKEY_SEQ1, priv->regs + RTIWDKEY);
>> +
>> +	return 0;
>> +}
>> +
>> +static int rti_wdt_probe(struct udevice *dev)
>> +{
>> +	struct rti_wdt_priv *priv = dev_get_priv(dev);
>> +	struct clk clk;
>> +	int ret;
>> +
>> +	priv->regs = devfdt_get_addr(dev);
>> +	if (!priv->regs)
>> +		return -EINVAL;
>> +
>> +	ret = clk_get_by_index(dev, 0, &clk);
>> +	if (ret)
>> +		return ret;
>> +
>> +	priv->clk_khz = clk_get_rate(&clk);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct wdt_ops rti_wdt_ops = {
>> +	.start = rti_wdt_start,
>> +	.reset = rti_wdt_reset,
>> +};
>> +
>> +static const struct udevice_id rti_wdt_ids[] = {
>> +	{ .compatible = "ti,j7-rti-wdt" },
> 
> Is this compatible matching with Kernel's compatible?
> 

Yes.

Jan

-- 
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux