[PATCHv3 17/36] dts: P4080: Add ESPI DT nodes

Zhiqiang Hou Zhiqiang.Hou at nxp.com
Thu Jun 4 17:16:46 CEST 2020


From: Xiaowei Bao <xiaowei.bao at nxp.com>

Add ESPI controller DT node for P4080.

Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
V3:
 - Move the eSPI DT node back to path /soc, in v2 the patch command put
   the eSPI node to the path /cpus by mistake.

 arch/powerpc/dts/p4080.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/powerpc/dts/p4080.dtsi b/arch/powerpc/dts/p4080.dtsi
index 4a80561e18..8ab5cf541a 100644
--- a/arch/powerpc/dts/p4080.dtsi
+++ b/arch/powerpc/dts/p4080.dtsi
@@ -80,6 +80,15 @@
 			clock-frequency = <0x0>;
 		};
 
+		espi0: spi at 110000 {
+			compatible = "fsl,mpc8536-espi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x110000 0x1000>;
+			fsl,espi-num-chipselects = <4>;
+			status = "disabled";
+		};
+
 		esdhc: esdhc at 114000 {
 			compatible = "fsl,esdhc";
 			reg = <0x114000 0x1000>;
-- 
2.25.1



More information about the U-Boot mailing list