[PATCH v2] doc: board: xilinx: zynq.rst: add description how to flash a SD card

[Michal Simek]

On 03. 06. 20 11:50, Johannes Krottmayer wrote:
> Add a short description in the ZYNQ documentation how to prepare a SD card and
> copy the related images to SD card.
> 
> Signed-off-by: Johannes Krottmayer <krjdev at gmail.com>
> Cc: Michal Simek <michal.simek at xilinx.com>
> ---
> Changes for v2
>     - added missing partition number in mount command
> 
> I think, it's necessary for the documentation to avoid such user questions
> (like mine) in this list.
> 
> Okay?
> 
>  doc/board/xilinx/zynq.rst | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/doc/board/xilinx/zynq.rst b/doc/board/xilinx/zynq.rst
> index 6a09df1d15..f564434b69 100644
> --- a/doc/board/xilinx/zynq.rst
> +++ b/doc/board/xilinx/zynq.rst
> @@ -60,6 +60,25 @@ SLCR bootmode register Bit[3:0] values
>  "modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot"
>  bootmode strings at runtime.
>  
> +Flashing
> +--------
> +
> +SD Card
> +^^^^^^^
> +
> +To write an image that boots from a SD card first create a FAT32 partition
> +and a FAT32 filesystem on the SD card::
> +
> +        sudo fdisk /dev/sdx
> +        sudo mkfs.vfat -F 32 /dev/sdx1
> +
> +Mount the SD card and copy the SPL and U-Boot to the root directory of the
> +SD card::
> +
> +        sudo mount -t vfat /dev/sdx1 /mnt
> +        sudo cp spl/boot.bin /mnt
> +        sudo cp u-boot.img /mnt
> +
>  Mainline status
>  ---------------
>  
> 

Applied.
M