[PATCH 2/4] omap3_beagle: Disable USB support

[Adam Ford]

On Tue, Jun 30, 2020 at 11:56 AM Tom Rini <trini at konsulko.com> wrote:
>
> Disable USB support for now.  There is non-trivial work required to
> fully move the OMAP3 platforms to DM.  While this work is in-progress,
> disable USB support for now as we've gone well past the migration
> deadline.
>
> Cc: Adam Ford <aford173 at gmail.com>
> Signed-off-by: Tom Rini <trini at konsulko.com>
> ---

I don't have a beagle, but I have DM_USB working on two different
OMAP3 boards.  I am curious to know what's left or what's not working.

adam

>  configs/omap3_beagle_defconfig | 20 ++------------------
>  1 file changed, 2 insertions(+), 18 deletions(-)
>
> diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
> index ed7cb8f2ff63..236a4f4f5f5a 100644
> --- a/configs/omap3_beagle_defconfig
> +++ b/configs/omap3_beagle_defconfig
> @@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=2
>  CONFIG_SPL=y
>  CONFIG_SPL_TEXT_BASE=0x40200000
>  CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_ANDROID_BOOT_IMAGE=y
>  CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
>  CONFIG_USE_PREBOOT=y
>  CONFIG_PREBOOT="usb start"
> @@ -31,7 +32,6 @@ CONFIG_CMD_MMC=y
>  CONFIG_CMD_NAND=y
>  CONFIG_CMD_NAND_TRIMFFS=y
>  CONFIG_CMD_SPI=y
> -CONFIG_CMD_USB=y
>  CONFIG_CMD_CACHE=y
>  CONFIG_CMD_EXT4_WRITE=y
>  CONFIG_CMD_FS_UUID=y
> @@ -50,8 +50,6 @@ CONFIG_ENV_IS_IN_NAND=y
>  CONFIG_SPL_DM=y
>  CONFIG_SPL_DM_SEQ_ALIAS=y
>  CONFIG_SPL_OF_TRANSLATE=y
> -CONFIG_USB_FUNCTION_FASTBOOT=y
> -CONFIG_FASTBOOT_BUF_ADDR=0x82000000
>  CONFIG_LED_STATUS=y
>  CONFIG_LED_STATUS0=y
>  CONFIG_LED_STATUS_BIT=1
> @@ -73,24 +71,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
>  CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
>  CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
>  CONFIG_SPL_NAND_SIMPLE=y
> +CONFIG_DM_ETH=y
>  CONFIG_SPI=y
>  CONFIG_DM_SPI=y
>  CONFIG_OMAP3_SPI=y
> -CONFIG_USB=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_OMAP3=y
> -CONFIG_USB_MUSB_GADGET=y
> -CONFIG_USB_MUSB_OMAP2PLUS=y
> -CONFIG_TWL4030_USB=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_MANUFACTURER="TI"
> -CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
> -CONFIG_USB_ETHER=y
> -CONFIG_USB_HOST_ETHER=y
> -CONFIG_USB_ETHER_ASIX=y
> -CONFIG_USB_ETHER_MCS7830=y
> -CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_VIDEO_OMAP3=y
>  CONFIG_FAT_WRITE=y
>  CONFIG_BCH=y
> --
> 2.17.1
>