[PATCH 2/4] omap3_beagle: Disable USB support

[Tom Rini]

Disable USB support for now.  There is non-trivial work required to
fully move the OMAP3 platforms to DM.  While this work is in-progress,
disable USB support for now as we've gone well past the migration
deadline.

Cc: Adam Ford <aford173 at gmail.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 configs/omap3_beagle_defconfig | 20 ++------------------
 1 file changed, 2 insertions(+), 18 deletions(-)

diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index ed7cb8f2ff63..236a4f4f5f5a 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL=y
 CONFIG_SPL_TEXT_BASE=0x40200000
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="usb start"
@@ -31,7 +32,6 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FS_UUID=y
@@ -50,8 +50,6 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_LED_STATUS=y
 CONFIG_LED_STATUS0=y
 CONFIG_LED_STATUS_BIT=1
@@ -73,24 +71,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
 CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_DM_ETH=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OMAP3=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TI"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_USB_ETHER_MCS7830=y
-CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_VIDEO_OMAP3=y
 CONFIG_FAT_WRITE=y
 CONFIG_BCH=y
-- 
2.17.1