U-Boot atheros PHY support and cubox ethernet

Tom Rini trini at konsulko.com
Tue Jun 16 22:10:46 CEST 2020


On Tue, Jun 16, 2020 at 10:58:26PM +0300, Vladimir Oltean wrote:
> Hi Tom,
> 
> On Tue, 16 Jun 2020 at 22:55, Tom Rini <trini at konsulko.com> wrote:
> >
> > Hey all,
> >
> > In commit 4346df3392c0 ("phy: atheros: Make RGMII Tx delays actually
> > configurable for AR8035") we brought in changes to get in to line with
> > upstream linux kernel support for this PHY and in turn deal with more
> > "driver was wrong, DT was wrong too" changes.  Now the problem I have is
> > that ethernet on my Hummingboard doesn't work AND as far as I can tell,
> > the DTB is correct and saying phy-mode = "rgmii-id" now not "rgmii".  It
> > also looks to match what's in v5.7 for the kernel.  What do I need to do
> > here next?  Thanks!
> >
> > --
> > Tom
> 
> Reverting 4346df3392c0 makes your interface work?

Yup.

> What is the DTS path that your hummingboard uses?

Good question.  Per board/solidrun/mx6cuboxi/mx6cuboxi.c:
/*
 * This is not a perfect match. Avoid dependency on the DM GPIO driver
 * needed
 * for accurate board detection. Hummingboard2 DT is good enough for
 * U-Boot on
 * all Hummingboard/Cubox-i platforms.
 */
so arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts is the base.  But
the board really is the original hummingboard platform.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200616/74e155de/attachment.sig>


More information about the U-Boot mailing list