[PATCH v2 2/4] roc-rk3399-pc: Mark default env from SPI

[Kever Yang]

On 2020/6/2 上午4:42, Jagan Teki wrote:
> Mark the default U-Boot environment as SPI flash since
> this is an on board flash device.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/roc-pc-rk3399_defconfig | 3 ++-
>   include/configs/roc-pc-rk3399.h | 4 ----
>   2 files changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> index 76e76c160e..18c343f9f9 100644
> --- a/configs/roc-pc-rk3399_defconfig
> +++ b/configs/roc-pc-rk3399_defconfig
> @@ -1,6 +1,7 @@
>   CONFIG_ARM=y
>   CONFIG_ARCH_ROCKCHIP=y
>   CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ENV_SIZE=0x8000
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_ROCKCHIP_RK3399=y
>   CONFIG_TARGET_ROC_PC_RK3399=y
> @@ -24,7 +25,7 @@ CONFIG_CMD_TIME=y
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc"
>   CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> -CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> diff --git a/include/configs/roc-pc-rk3399.h b/include/configs/roc-pc-rk3399.h
> index d4cbc3532e..59fe22289c 100644
> --- a/include/configs/roc-pc-rk3399.h
> +++ b/include/configs/roc-pc-rk3399.h
> @@ -13,10 +13,6 @@
>   
>   #include <configs/rk3399_common.h>
>   
> -#if defined(CONFIG_ENV_IS_IN_MMC)
> -# define CONFIG_SYS_MMC_ENV_DEV		0
> -#endif
> -
>   #define SDRAM_BANK_SIZE			(2UL << 30)
>   
>   #endif