[PATCH v2 03/10] powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board

Jagan Teki jagan at amarulasolutions.com
Sat Jun 13 14:21:01 CEST 2020


DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Naveen Burmi <naveen.burmi at nxp.com>
Patch-cc: Ruchika Gupta <ruchika.gupta at nxp.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain at nxp.com>
---
 arch/powerpc/cpu/mpc85xx/Kconfig              |   9 -
 board/freescale/bsc9132qds/Kconfig            |  14 -
 board/freescale/bsc9132qds/MAINTAINERS        |  25 -
 board/freescale/bsc9132qds/Makefile           |  21 -
 board/freescale/bsc9132qds/README             | 150 -----
 board/freescale/bsc9132qds/bsc9132qds.c       | 432 --------------
 board/freescale/bsc9132qds/ddr.c              | 191 ------
 board/freescale/bsc9132qds/law.c              |  28 -
 board/freescale/bsc9132qds/spl_minimal.c      | 117 ----
 board/freescale/bsc9132qds/tlb.c              |  91 ---
 ...BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig |  66 ---
 configs/BSC9132QDS_NAND_DDRCLK100_defconfig   |  72 ---
 ...BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig |  66 ---
 configs/BSC9132QDS_NAND_DDRCLK133_defconfig   |  72 ---
 .../BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig |  65 ---
 configs/BSC9132QDS_NOR_DDRCLK100_defconfig    |  63 --
 .../BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig |  65 ---
 configs/BSC9132QDS_NOR_DDRCLK133_defconfig    |  63 --
 ...C9132QDS_SDCARD_DDRCLK100_SECURE_defconfig |  66 ---
 configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig |  63 --
 ...C9132QDS_SDCARD_DDRCLK133_SECURE_defconfig |  66 ---
 configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig |  63 --
 ...132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig |  66 ---
 .../BSC9132QDS_SPIFLASH_DDRCLK100_defconfig   |  64 --
 ...132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig |  66 ---
 .../BSC9132QDS_SPIFLASH_DDRCLK133_defconfig   |  64 --
 include/configs/BSC9132QDS.h                  | 548 ------------------
 27 files changed, 2676 deletions(-)
 delete mode 100644 board/freescale/bsc9132qds/Kconfig
 delete mode 100644 board/freescale/bsc9132qds/MAINTAINERS
 delete mode 100644 board/freescale/bsc9132qds/Makefile
 delete mode 100644 board/freescale/bsc9132qds/README
 delete mode 100644 board/freescale/bsc9132qds/bsc9132qds.c
 delete mode 100644 board/freescale/bsc9132qds/ddr.c
 delete mode 100644 board/freescale/bsc9132qds/law.c
 delete mode 100644 board/freescale/bsc9132qds/spl_minimal.c
 delete mode 100644 board/freescale/bsc9132qds/tlb.c
 delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK100_defconfig
 delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_NAND_DDRCLK133_defconfig
 delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK100_defconfig
 delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_NOR_DDRCLK133_defconfig
 delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig
 delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig
 delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig
 delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig
 delete mode 100644 configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig
 delete mode 100644 include/configs/BSC9132QDS.h

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 6928851168..7a157da763 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -24,14 +24,6 @@ config TARGET_SOCRATES
 	bool "Support socrates"
 	select ARCH_MPC8544
 
-config TARGET_BSC9132QDS
-	bool "Support BSC9132QDS"
-	select ARCH_BSC9132
-	select BOARD_LATE_INIT if CHAIN_OF_TRUST
-	select SUPPORT_SPL
-	select BOARD_EARLY_INIT_F
-	select FSL_DDR_INTERACTIVE
-
 config TARGET_C29XPCIE
 	bool "Support C29XPCIE"
 	select ARCH_C29X
@@ -1573,7 +1565,6 @@ config SYS_FSL_LBC_CLK_DIV
 		Defines divider of platform clock(clock input to
 		eLBC controller).
 
-source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
diff --git a/board/freescale/bsc9132qds/Kconfig b/board/freescale/bsc9132qds/Kconfig
deleted file mode 100644
index e5499e6129..0000000000
--- a/board/freescale/bsc9132qds/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-if TARGET_BSC9132QDS
-
-config SYS_BOARD
-	default "bsc9132qds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "BSC9132QDS"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/bsc9132qds/MAINTAINERS b/board/freescale/bsc9132qds/MAINTAINERS
deleted file mode 100644
index 95abe3d408..0000000000
--- a/board/freescale/bsc9132qds/MAINTAINERS
+++ /dev/null
@@ -1,25 +0,0 @@
-BSC9132QDS BOARD
-M:	Naveen Burmi <naveen.burmi at nxp.com>
-S:	Maintained
-F:	board/freescale/bsc9132qds/
-F:	include/configs/BSC9132QDS.h
-F:	configs/BSC9132QDS_NAND_DDRCLK100_defconfig
-F:	configs/BSC9132QDS_NAND_DDRCLK133_defconfig
-F:	configs/BSC9132QDS_NOR_DDRCLK100_defconfig
-F:	configs/BSC9132QDS_NOR_DDRCLK133_defconfig
-F:	configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig
-F:	configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig
-F:	configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig
-F:	configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig
-
-BSC9132QDS_NAND_DDRCLK100_SECURE BOARD
-M:	Ruchika Gupta <ruchika.gupta at nxp.com>
-S:	Maintained
-F:	configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig
-F:	configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig
-F:	configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig
-F:	configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig
-F:	configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig
-F:	configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig
-F:	configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig
-F:	configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig
diff --git a/board/freescale/bsc9132qds/Makefile b/board/freescale/bsc9132qds/Makefile
deleted file mode 100644
index dcbdf42147..0000000000
--- a/board/freescale/bsc9132qds/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Freescale Semiconductor, Inc.
-
-MINIMAL=
-
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-obj-y	+= spl_minimal.o
-else
-obj-y	+= bsc9132qds.o
-obj-y	+= ddr.o
-endif
-
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README
deleted file mode 100644
index ede95d41da..0000000000
--- a/board/freescale/bsc9132qds/README
+++ /dev/null
@@ -1,150 +0,0 @@
-Overview
---------
- The BSC9132 is a highly integrated device that targets the evolving
- Microcell, Picocell, and Enterprise-Femto base station market subsegments.
-
- The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
- core technologies with MAPLE-B2P baseband acceleration processing elements
- to address the need for a high performance, low cost, integrated solution
- that handles all required processing layers without the need for an
- external device except for an RF transceiver or, in a Micro base station
- configuration, a host device that handles the L3/L4 and handover between
- sectors.
-
- The BSC9132 SoC includes the following function and features:
-    - Power Architecture subsystem including two e500 processors with
-	512-Kbyte shared L2 cache
-    - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
-	cache
-    - 32 Kbyte of shared M3 memory
-    - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
-      Processing (MAPLE-B2P)
-    - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
-      ECC), up to 1333 MHz data rate
-    - Dedicated security engine featuring trusted boot
-    - Two DMA controllers
-	 - OCNDMA with four bidirectional channels
-	 - SysDMA with sixteen bidirectional channels
-    - Interfaces
-	- Four-lane SerDes PHY
-	    - PCI Express controller complies with the PEX Specification-Rev 2.0
-	- Two Common Public Radio Interface (CPRI) controller lanes
-	    - High-speed USB 2.0 host and device controller with ULPI interface
-	- Enhanced secure digital (SD/MMC) host controller (eSDHC)
-	    - Antenna interface controller (AIC), supporting four industry
-		standard JESD207/four custom ADI RF interfaces
-       - ADI lanes support both full duplex FDD support & half duplex TDD
-       - Universal Subscriber Identity Module (USIM) interface that
-	   facilitates communication to SIM cards or Eurochip pre-paid phone
-	   cards
-       - Two DUART, two eSPI, and two I2C controllers
-       - Integrated Flash memory controller (IFC)
-       - GPIO
-     - Sixteen 32-bit timers
-
-The SC3850 core subsystem consists of the following:
- - 32 KB, 8-way, level 1 instruction cache (L1 ICache)
- - 32 KB, 8-way, level 1 data cache (L1 DCache)
- - 512 KB, 8-way, level 2 unified instruction/data cache (L2 cache/M2 memory)
- - Memory management unit (MMU)
- - Global interrupt controller ( GIC)
- - Debug and profiling unit (DPU)
- - Two 32-bit quad timers
-
-BSC9132QDS board Overview
--------------------------
- 2Gbyte DDR3 (on board DDR), Dual Ranki
- 32Mbyte 16bit NOR flash
- 128Mbyte 2K page size NAND Flash
- 256 Kbit M24256 I2C EEPROM
- 128 Mbit SPI Flash memory
- SD slot
- USB-ULPI
- eTSEC1: Connected to SGMII PHY
- eTSEC2: Connected to SGMII PHY
- PCIe
- CPRI
- SerDes
- I2C RTC
- DUART interface: supports one UARTs up to 115200 bps for console display
-
-Frequency Combinations Supported
---------------------------------
-Core MHz/CCB MHz/DDR(MT/s)
-1. CPU0/CPU1/CCB/DDR: 1000MHz/1000MHz/500MHz/800MHz
-     (SYSCLK = 100MHz, DDRCLK = 100MHz)
-2. CPU0/CPU1/CCB/DDR: 1200MHz/1200MHz/600MHz/1330MHz
-     (SYSCLK = 100MHz, DDRCLK = 133MHz)
-
-Boot Methods Supported
------------------------
-1. NOR Flash
-2. NAND Flash
-3. SD Card
-4. SPI flash
-
-Default Boot Method
---------------------
-NOR boot
-
-Building U-Boot
---------------
-To build the U-Boot for BSC9132QDS:
-1. NOR Flash
-	make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK
-	make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK
-2. NAND Flash : It is currently not supported
-3. SPI Flash
-	make BSC9132QDS_SPIFLASH_DDRCLK100 : For 100MHZ DDR CLK
-	make BSC9132QDS_SPIFLASH_DDRCLK133 : For 133MHZ DDR CLK
-4. SD Card
-	make BSC9132QDS_SDCARD_DDRCLK100 : For 100MHZ DDR CLK
-	make BSC9132QDS_SDCARD_DDRCLK133 : For 133MHZ DDR CLK
-
-Memory map
------------
- 0x0000_0000	0x7FFF_FFFF	DDR			2G cacheable
- 0x8000_0000	0x8FFF_FFFF	NOR Flash		256M
- 0x9000_0000	0x9FFF_FFFF	PCIe Memory 		256M
- 0xA000_0000	0xA7FF_FFFF	DSP core1 L2 space	128M
- 0xB000_0000	0xB0FF_FFFF	DSP core0 M2 space	16M
- 0xB100_0000	0xB1FF_FFFF	DSP core1 M2 space	16M
- 0xC000_0000	0xC000_7FFF	M3 Memory		32K
- 0xC001_0000	0xC001_FFFF	PCI Express I/O		64K
- 0xC100_0000	0xC13F_FFFF	MAPLE-2F		4M
- 0xC1F0_0000	0xC1F7_FFFF	PA SRAM Region 0	512K
- 0xC1F8_0000	0xC1FB_FFFF	PA SRAM Region 1	512K
- 0xFED0_0000	0xFED0_3FFF	SEC Secured RAM		16K
- 0xFEE0_0000	0xFEE0_0FFF	DSP Boot ROM		4K
- 0xFF60_0000	0xFF6F_FFFF 	DSP CCSR		1M
- 0xFF70_0000	0xFF7F_FFFF	PA CCSR			1M
- 0xFF80_0000	0xFFFF_FFFF	Boot Page & NAND Buffer 8M
-
-Flashing Images
----------------
-To place a new U-Boot image in the NAND flash and then boot
-with that new image temporarily, use this:
-	tftp 1000000 u-boot-nand.bin
-	nand erase 0 100000
-	nand write 1000000 0 100000
-	reset
-
-Using the Device Tree Source File
----------------------------------
-To create the DTB (Device Tree Binary) image file,
-use a command similar to this:
-
-	dtc -b 0 -f -I dts -O dtb bsc9132qds.dts > bsc9132qds.dtb
-
-Likely, that .dts file will come from here;
-
-	linux-2.6/arch/powerpc/boot/dts/bsc9132qds.dts
-
-Booting Linux
--------------
-Place a linux uImage in the TFTP disk area.
-
-	tftp 1000000 uImage
-	tftp 2000000 rootfs.ext2.gz.uboot
-	tftp c00000 bsc9132qds.dtb
-	bootm 1000000 2000000 c00000
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
deleted file mode 100644
index 6870674f7a..0000000000
--- a/board/freescale/bsc9132qds/bsc9132qds.c
+++ /dev/null
@@ -1,432 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <image.h>
-#include <init.h>
-#include <net.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/io.h>
-#include <env.h>
-#include <miiphy.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <mmc.h>
-#include <netdev.h>
-#include <fsl_ifc.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <fsl_ddr_sdram.h>
-#include <jffs2/load_kernel.h>
-#include <mtd_node.h>
-#include <flash.h>
-
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#endif
-
-#include "../common/qixis.h"
-DECLARE_GLOBAL_DATA_PTR;
-
-
-int board_early_init_f(void)
-{
-	struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
-
-	setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-
-	return 0;
-}
-
-void board_config_serdes_mux(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 pordevsr = in_be32(&gur->pordevsr);
-	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
-				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
-
-	switch (srds_cfg) {
-	/* PEX(1) PEX(2) CPRI 2 CPRI 1 */
-	case  1:
-	case  2:
-	case  3:
-	case  4:
-	case  5:
-	case 22:
-	case 23:
-	case 24:
-	case 25:
-	case 26:
-		QIXIS_WRITE_I2C(brdcfg[4], 0x03);
-		break;
-
-	/* PEX(1) PEX(2) SGMII1 CPRI 1 */
-	case  6:
-	case  7:
-	case  8:
-	case  9:
-	case 10:
-	case 27:
-	case 28:
-	case 29:
-	case 30:
-	case 31:
-		QIXIS_WRITE_I2C(brdcfg[4], 0x01);
-		break;
-
-	/* PEX(1) PEX(2) SGMII1 SGMII2 */
-	case 11:
-	case 32:
-		QIXIS_WRITE_I2C(brdcfg[4], 0x00);
-		break;
-
-	/* PEX(1) SGMII2 CPRI 2 CPRI 1 */
-	case 12:
-	case 13:
-	case 14:
-	case 15:
-	case 16:
-	case 33:
-	case 34:
-	case 35:
-	case 36:
-	case 37:
-		QIXIS_WRITE_I2C(brdcfg[4], 0x07);
-		break;
-
-	/* PEX(1) SGMII2 SGMII1 CPRI 1 */
-	case 17:
-	case 18:
-	case 19:
-	case 20:
-	case 21:
-	case 38:
-	case 39:
-	case 40:
-	case 41:
-	case 42:
-		QIXIS_WRITE_I2C(brdcfg[4], 0x05);
-		break;
-
-	/* SGMII1 SGMII2 CPRI 2 CPRI 1 */
-	case 43:
-	case 44:
-	case 45:
-	case 46:
-	case 47:
-		QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
-		break;
-
-
-	default:
-		break;
-	}
-}
-
-/* Configure DSP DDR controller */
-void dsp_ddr_configure(void)
-{
-	/*
-	 *There are separate DDR-controllers for DSP and PowerPC side DDR.
-	 *copy the ddr controller settings from PowerPC side DDR controller
-	 *to the DSP DDR controller as connected DDR memories are similar.
-	 */
-	struct ccsr_ddr __iomem *pa_ddr =
-			(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
-	struct ccsr_ddr temp_ddr;
-	struct ccsr_ddr __iomem *dsp_ddr =
-			(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR;
-
-	memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr));
-	temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS;
-	temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN;
-	memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr));
-	dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN;
-}
-
-int board_early_init_r(void)
-{
-#ifdef CONFIG_MTD_NOR_FLASH
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_64M, 1);
-
-	set_tlb(1, flashbase + 0x4000000,
-			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
-#endif
-	board_config_serdes_mux();
-	dsp_ddr_configure();
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif /* ifdef CONFIG_PCI */
-
-int checkboard(void)
-{
-	struct cpu_type *cpu;
-	u8 sw;
-
-	cpu = gd->arch.cpu;
-	printf("Board: %sQDS\n", cpu->name);
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
-	QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
-
-	sw = QIXIS_READ(brdcfg[0]);
-	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
-	printf("IFC chip select:");
-	switch (sw) {
-	case 0:
-		printf("NOR\n");
-		break;
-	case 2:
-		printf("Promjet\n");
-		break;
-	case 4:
-		printf("NAND\n");
-		break;
-	default:
-		printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
-		break;
-	}
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_TSEC_ENET
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-
-#endif
-
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-
-	fsl_pq_mdio_init(bis, &mdio_info);
-	tsec_eth_init(bis, tsec_info, num);
-#endif
-
-	#ifdef CONFIG_PCI
-	pci_eth_init(bis);
-	#endif
-
-	return 0;
-}
-
-#define USBMUX_SEL_MASK		0xc0
-#define USBMUX_SEL_UART2	0xc0
-#define USBMUX_SEL_USB		0x40
-#define SPIMUX_SEL_UART3	0x80
-#define GPS_MUX_SEL_GPS		0x40
-
-#define TSEC_1588_CLKIN_MASK	0x03
-#define CON_XCVR_REF_CLK	0x00
-
-int misc_init_r(void)
-{
-	u8 val;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 porbmsr = in_be32(&gur->porbmsr);
-	u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
-
-	/*Configure 1588 clock-in source from RF Card*/
-	val = QIXIS_READ_I2C(brdcfg[5]);
-	QIXIS_WRITE_I2C(brdcfg[5],
-		(val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
-
-	if (hwconfig("uart2") && hwconfig("usb1")) {
-		printf("UART2 and USB cannot work together on the board\n");
-		printf("Remove one from hwconfig and reset\n");
-	} else {
-		if (hwconfig("uart2")) {
-			val = QIXIS_READ_I2C(brdcfg[5]);
-			QIXIS_WRITE_I2C(brdcfg[5],
-				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
-			clrbits_be32(&gur->pmuxcr3,
-						MPC85xx_PMUXCR3_USB_SEL_MASK);
-			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
-		} else {
-			/* By default USB should be selected.
-			* Programming FPGA to select USB. */
-			val = QIXIS_READ_I2C(brdcfg[5]);
-			QIXIS_WRITE_I2C(brdcfg[5],
-				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
-		}
-
-	}
-
-	if (hwconfig("sim")) {
-		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
-			romloc == PORBMSR_ROMLOC_NOR ||
-			romloc == PORBMSR_ROMLOC_SPI) {
-
-			val = QIXIS_READ_I2C(brdcfg[3]);
-			QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
-			clrbits_be32(&gur->pmuxcr,
-				MPC85xx_PMUXCR0_SIM_SEL_MASK);
-			setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
-		}
-	}
-
-	if (hwconfig("uart3")) {
-		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
-			romloc == PORBMSR_ROMLOC_NOR ||
-			romloc == PORBMSR_ROMLOC_SDHC) {
-
-			/* UART3 and SPI1 (Flashes) are muxed together */
-			val = QIXIS_READ_I2C(brdcfg[3]);
-			QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
-			clrbits_be32(&gur->pmuxcr3,
-						MPC85xx_PMUXCR3_UART3_SEL_MASK);
-			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
-
-			/* MUX to select UART3 connection to J24 header
-			 * or to GPS */
-			val = QIXIS_READ_I2C(brdcfg[6]);
-			if (hwconfig("gps"))
-				QIXIS_WRITE_I2C(brdcfg[6],
-						(val | GPS_MUX_SEL_GPS));
-			else
-				QIXIS_WRITE_I2C(brdcfg[6],
-						(val & ~(GPS_MUX_SEL_GPS)));
-		}
-	}
-	return 0;
-}
-
-void fdt_del_node_compat(void *blob, const char *compatible)
-{
-	int err;
-	int off = fdt_node_offset_by_compatible(blob, -1, compatible);
-	if (off < 0) {
-		printf("WARNING: could not find compatible node %s: %s.\n",
-			compatible, fdt_strerror(off));
-		return;
-	}
-	err = fdt_del_node(blob, off);
-	if (err < 0) {
-		printf("WARNING: could not remove %s: %s.\n",
-			compatible, fdt_strerror(err));
-	}
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-#ifdef CONFIG_FDT_FIXUP_PARTITIONS
-static const struct node_info nodes[] = {
-	{ "cfi-flash",			MTD_DEV_TYPE_NOR,  },
-	{ "fsl,ifc-nand",		MTD_DEV_TYPE_NAND, },
-};
-#endif
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = env_get_bootm_low();
-	size = env_get_bootm_size();
-
-	#if defined(CONFIG_PCI)
-	FT_FSL_PCI_SETUP;
-	#endif
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-#ifdef CONFIG_FDT_FIXUP_PARTITIONS
-	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
-#endif
-
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 porbmsr = in_be32(&gur->porbmsr);
-	u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
-
-	if (!(hwconfig("uart2") && hwconfig("usb1"))) {
-		/* If uart2 is there in hwconfig remove usb node from
-		 *  device tree */
-
-		if (hwconfig("uart2")) {
-			/* remove dts usb node */
-			fdt_del_node_compat(blob, "fsl-usb2-dr");
-		} else {
-			fsl_fdt_fixup_dr_usb(blob, bd);
-			fdt_del_node_and_alias(blob, "serial2");
-		}
-	}
-
-	if (hwconfig("uart3")) {
-		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
-			romloc == PORBMSR_ROMLOC_NOR ||
-			romloc == PORBMSR_ROMLOC_SDHC)
-			/* Delete SPI node from the device tree */
-				fdt_del_node_and_alias(blob, "spi1");
-	} else
-		fdt_del_node_and_alias(blob, "serial3");
-
-	if (hwconfig("sim")) {
-		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
-			romloc == PORBMSR_ROMLOC_NOR ||
-			romloc == PORBMSR_ROMLOC_SPI) {
-
-			/* remove dts sdhc node */
-			fdt_del_node_compat(blob, "fsl,esdhc");
-		} else if (romloc == PORBMSR_ROMLOC_SDHC) {
-
-			/* remove dts sim node */
-			fdt_del_node_compat(blob, "fsl,sim-v1.0");
-			printf("SIM & SDHC can't work together on the board");
-			printf("\nRemove sim from hwconfig and reset\n");
-		}
-	}
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c
deleted file mode 100644
index f4effe5a2d..0000000000
--- a/board/freescale/bsc9132qds/ddr.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <vsprintf.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/io.h>
-#include <asm/fsl_law.h>
-
-#ifndef CONFIG_SYS_DDR_RAW_TIMING
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1333 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1333,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1333,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1333,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1333,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1333,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1333,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1333,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1333,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_1333,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
-	{750, 850, &ddr_cfg_regs_800},
-	{1060, 1333, &ddr_cfg_regs_1333},
-	{0, 0, NULL}
-};
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-phys_size_t fixed_sdram(void)
-{
-	int i;
-	char buf[32];
-	fsl_ddr_cfg_regs_t ddr_cfg_regs;
-	phys_size_t ddr_size;
-	ulong ddr_freq, ddr_freq_mhz;
-
-	ddr_freq = get_ddr_freq(0);
-	ddr_freq_mhz = ddr_freq / 1000000;
-
-	printf("Configuring DDR for %s MT/s data rate\n",
-				strmhz(buf, ddr_freq));
-
-	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
-		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
-		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
-			memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
-							sizeof(ddr_cfg_regs));
-			break;
-		}
-	}
-
-	if (fixed_ddr_parm_0[i].max_freq == 0)
-		panic("Unsupported DDR data rate %s MT/s data rate\n",
-					strmhz(buf, ddr_freq));
-
-	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
-					LAW_TRGT_IF_DDR_1) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	}
-
-	return ddr_size;
-}
-
-#else /* CONFIG_SYS_DDR_RAW_TIMING */
-/* Micron MT41J512M8_187E */
-dimm_params_t ddr_raw_timing = {
-	.n_ranks = 1,
-	.rank_density = 1073741824u,
-	.capacity = 1073741824u,
-	.primary_sdram_width = 32,
-	.ec_sdram_width = 0,
-	.registered_dimm = 0,
-	.mirrored_dimm = 0,
-	.n_row_addr = 15,
-	.n_col_addr = 10,
-	.n_banks_per_sdram_device = 8,
-	.edc_config = 0,
-	.burst_lengths_bitmask = 0x0c,
-
-	.tckmin_x_ps = 1870,
-	.caslat_x = 0x1e << 4,	/* 5,6,7,8 */
-	.taa_ps = 13125,
-	.twr_ps = 15000,
-	.trcd_ps = 13125,
-	.trrd_ps = 7500,
-	.trp_ps = 13125,
-	.tras_ps = 37500,
-	.trc_ps = 50625,
-	.trfc_ps = 160000,
-	.twtr_ps = 7500,
-	.trtp_ps = 7500,
-	.refresh_rate_ps = 7800000,
-	.tfaw_ps = 37500,
-};
-
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
-		unsigned int controller_number,
-		unsigned int dimm_number)
-{
-	const char dimm_model[] = "Fixed DDR on board";
-
-	if ((controller_number == 0) && (dimm_number == 0)) {
-		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
-		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
-		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
-	}
-
-	return 0;
-}
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	int i;
-	popts->clk_adjust = 6;
-	popts->cpo_override = 0x1f;
-	popts->write_data_delay = 2;
-	popts->half_strength_driver_enable = 1;
-	/* Write leveling override */
-	popts->wrlvl_en = 1;
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-	popts->wrlvl_start = 0x8;
-	popts->trwt_override = 1;
-	popts->trwt = 0;
-
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
-		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
-	}
-}
-
-#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c
deleted file mode 100644
index 6dca3d1751..0000000000
--- a/board/freescale/bsc9132qds/law.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_IFC),
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_FPGA_BASE_PHYS
-	SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
-#endif
-	SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M,
-		LAW_TRGT_IF_DSP_CCSR),
-	SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_32M,
-		LAW_TRGT_IF_OCN_DSP),
-	SET_LAW(CONFIG_SYS_FSL_DSP_M3_RAM_ADDR, LAW_SIZE_32K,
-		LAW_TRGT_IF_CLASS_DSP),
-	SET_LAW(CONFIG_SYS_FSL_DSP_DDR_ADDR, LAW_SIZE_1G,
-		LAW_TRGT_IF_CLASS_DSP)
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/bsc9132qds/spl_minimal.c b/board/freescale/bsc9132qds/spl_minimal.c
deleted file mode 100644
index dd56ad6b2b..0000000000
--- a/board/freescale/bsc9132qds/spl_minimal.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <linux/compiler.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void sdram_init(void)
-{
-	struct ccsr_ddr __iomem *ddr =
-		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
-#if CONFIG_DDR_CLK_FREQ == 100000000
-	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
-	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
-	__raw_writel(CONFIG_SYS_DDR_CONTROL_800 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
-	__raw_writel(CONFIG_SYS_DDR_CONTROL_2_800, &ddr->sdram_cfg_2);
-	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
-
-	__raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
-	__raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
-	__raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
-	__raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
-	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
-	__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
-
-	__raw_writel(CONFIG_SYS_DDR_TIMING_4_800, &ddr->timing_cfg_4);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_5_800, &ddr->timing_cfg_5);
-	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
-#elif CONFIG_DDR_CLK_FREQ == 133000000
-	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
-	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
-	__raw_writel(CONFIG_SYS_DDR_CONTROL_1333 | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
-	__raw_writel(CONFIG_SYS_DDR_CONTROL_2_1333, &ddr->sdram_cfg_2);
-	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
-
-	__raw_writel(CONFIG_SYS_DDR_TIMING_3_1333, &ddr->timing_cfg_3);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_0_1333, &ddr->timing_cfg_0);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_1_1333, &ddr->timing_cfg_1);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_2_1333, &ddr->timing_cfg_2);
-	__raw_writel(CONFIG_SYS_DDR_MODE_1_1333, &ddr->sdram_mode);
-	__raw_writel(CONFIG_SYS_DDR_MODE_2_1333, &ddr->sdram_mode_2);
-	__raw_writel(CONFIG_SYS_DDR_INTERVAL_1333, &ddr->sdram_interval);
-	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_1333, &ddr->sdram_clk_cntl);
-	__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_1333, &ddr->ddr_wrlvl_cntl);
-
-	__raw_writel(CONFIG_SYS_DDR_TIMING_4_1333, &ddr->timing_cfg_4);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_5_1333, &ddr->timing_cfg_5);
-	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
-#else
-	puts("Not a valid DDR Freq Found! Please Reset\n");
-#endif
-	asm volatile("sync;isync");
-	udelay(500);
-
-	/* Let the controller go */
-	out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
-
-	set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1);
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-	puts("\nNAND boot... ");
-
-	/* Initialize the DDR3 */
-	sdram_init();
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	nand_boot();
-}
-
-void putc(char c)
-{
-	if (c == '\n')
-		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
-
-	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
deleted file mode 100644
index 9466814172..0000000000
--- a/board/freescale/bsc9132qds/tlb.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_BOOT
-	SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 10, BOOKE_PAGESZ_4K, 1),
-#endif
-
-	/* *I*G* - CCSRBAR (PA) */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 1, BOOKE_PAGESZ_1M, 1),
-
-	/* CCSRBAR (DSP) */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR,
-		      CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, MAS3_SW|MAS3_SR,
-		      MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-			0, 3, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000,
-			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
-			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-			0, 4, BOOKE_PAGESZ_64M, 1),
-
-#ifdef CONFIG_PCI
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 6, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 7, BOOKE_PAGESZ_64K, 1),
-#endif
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-		      0, 8, BOOKE_PAGESZ_1G, 1),
-#endif
-
-#ifdef CONFIG_SYS_FPGA_BASE
-		/* *I*G - Board FPGA  */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 9, BOOKE_PAGESZ_256K, 1),
-#endif
-
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 5, BOOKE_PAGESZ_1M, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig
deleted file mode 100644
index 83300b204a..0000000000
--- a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT,SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_defconfig
deleted file mode 100644
index 5f85370a0a..0000000000
--- a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0xE0000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFFE000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig
deleted file mode 100644
index 646158bb77..0000000000
--- a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT,SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_defconfig
deleted file mode 100644
index 82f37fbf1c..0000000000
--- a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0xE0000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFFFFE000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig
deleted file mode 100644
index 25ed8dc6a7..0000000000
--- a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x8FF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_defconfig
deleted file mode 100644
index e0e441de44..0000000000
--- a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x8FF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x8FF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig
deleted file mode 100644
index f7181d69d2..0000000000
--- a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x8FF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_defconfig
deleted file mode 100644
index 0ea77dc3a9..0000000000
--- a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x8FF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x8FF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig
deleted file mode 100644
index 30bdc5d3d2..0000000000
--- a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD,SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig
deleted file mode 100644
index 0e93c0d1c2..0000000000
--- a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD,SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig
deleted file mode 100644
index ca119d0625..0000000000
--- a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD,SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig
deleted file mode 100644
index 288d4cf883..0000000000
--- a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD,SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig
deleted file mode 100644
index e30dd9be90..0000000000
--- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig
deleted file mode 100644
index 8f4d4b8fbb..0000000000
--- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100_DDR_100"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig
deleted file mode 100644
index 80c51aa705..0000000000
--- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig
deleted file mode 100644
index fb16caad9a..0000000000
--- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_BSC9132QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100_DDR_133"
-CONFIG_BOOTDELAY=10
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
deleted file mode 100644
index ac37ae7cb8..0000000000
--- a/include/configs/BSC9132QDS.h
+++ /dev/null
@@ -1,548 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-/*
- * BSC9132 QDS board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
-#endif
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
-#endif
-#ifdef CONFIG_NAND_SECBOOT
-#define CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
-#endif
-
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-
-#define CONFIG_SPL_MAX_SIZE		8192
-#define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
-#define CONFIG_SPL_RELOC_STACK		0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((768 << 10) - 0x2000)
-#define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0
-#endif
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0x8ffffffc
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */
-
-#if defined(CONFIG_PCI)
-#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
-#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
-
-/*
- * PCI Windows
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-/* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"PCIe Slot"
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x90000000
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x90000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x90000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xC0010000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xC0010000
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-#if defined(CONFIG_SYS_CLK_100_DDR_100)
-#define CONFIG_SYS_CLK_FREQ	100000000
-#define CONFIG_DDR_CLK_FREQ	100000000
-#elif defined(CONFIG_SYS_CLK_100_DDR_133)
-#define CONFIG_SYS_CLK_FREQ	100000000
-#define CONFIG_DDR_CLK_FREQ	133000000
-#endif
-
-#define CONFIG_HWCONFIG
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-#define CONFIG_BTB			/* enable branch predition */
-
-/* DDR Setup */
-#define CONFIG_SYS_SPD_BUS_NUM		0
-#define SPD_EEPROM_ADDRESS1		0x54 /* I2C access */
-#define SPD_EEPROM_ADDRESS2		0x56 /* I2C access */
-
-#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
-
-#define CONFIG_SYS_SDRAM_SIZE		(1024)
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-
-/* DDR3 Controller Settings */
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003F
-#define CONFIG_SYS_DDR_CS0_CONFIG_1333	0x80004302
-#define CONFIG_SYS_DDR_CS0_CONFIG_800	0x80014302
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-#define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL_800		0x470C0000
-#define CONFIG_SYS_DDR_CONTROL_2_800	0x04401050
-#define CONFIG_SYS_DDR_TIMING_4_800		0x00220001
-#define CONFIG_SYS_DDR_TIMING_5_800		0x03402400
-
-#define CONFIG_SYS_DDR_CONTROL_1333		0x470C0008
-#define CONFIG_SYS_DDR_CONTROL_2_1333	0x24401010
-#define CONFIG_SYS_DDR_TIMING_4_1333		0x00000001
-#define CONFIG_SYS_DDR_TIMING_5_1333		0x03401400
-
-#define CONFIG_SYS_DDR_TIMING_3_800		0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_800		0x00330004
-#define CONFIG_SYS_DDR_TIMING_1_800		0x6f6B4846
-#define CONFIG_SYS_DDR_TIMING_2_800		0x0FA8C8CF
-#define CONFIG_SYS_DDR_CLK_CTRL_800		0x03000000
-#define CONFIG_SYS_DDR_MODE_1_800		0x40461520
-#define CONFIG_SYS_DDR_MODE_2_800		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL_800		0x0C300000
-#define CONFIG_SYS_DDR_WRLVL_CONTROL_800	0x8655A608
-
-#define CONFIG_SYS_DDR_TIMING_3_1333		0x01061000
-#define CONFIG_SYS_DDR_TIMING_0_1333		0x00440104
-#define CONFIG_SYS_DDR_TIMING_1_1333		0x98913A45
-#define CONFIG_SYS_DDR_TIMING_2_1333		0x0FB8B114
-#define CONFIG_SYS_DDR_CLK_CTRL_1333		0x02800000
-#define CONFIG_SYS_DDR_MODE_1_1333		0x00061A50
-#define CONFIG_SYS_DDR_MODE_2_1333		0x00100000
-#define CONFIG_SYS_DDR_INTERVAL_1333		0x144E0513
-#define CONFIG_SYS_DDR_WRLVL_CONTROL_1333	0x8655F607
-
-/*FIXME: the following params are constant w.r.t diff freq
-combinations. this should be removed later
-*/
-#if CONFIG_DDR_CLK_FREQ == 100000000
-#define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
-#define CONFIG_SYS_DDR_CONTROL		CONFIG_SYS_DDR_CONTROL_800
-#define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
-#define CONFIG_SYS_DDR_TIMING_4	CONFIG_SYS_DDR_TIMING_4_800
-#define CONFIG_SYS_DDR_TIMING_5	CONFIG_SYS_DDR_TIMING_5_800
-#elif CONFIG_DDR_CLK_FREQ == 133000000
-#define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
-#define CONFIG_SYS_DDR_CONTROL		CONFIG_SYS_DDR_CONTROL_1333
-#define CONFIG_SYS_DDR_CONTROL_2	CONFIG_SYS_DDR_CONTROL_2_1333
-#define CONFIG_SYS_DDR_TIMING_4	CONFIG_SYS_DDR_TIMING_4_1333
-#define CONFIG_SYS_DDR_TIMING_5	CONFIG_SYS_DDR_TIMING_5_1333
-#else
-#define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
-#define CONFIG_SYS_DDR_CONTROL		CONFIG_SYS_DDR_CONTROL_800
-#define CONFIG_SYS_DDR_CONTROL_2	CONFIG_SYS_DDR_CONTROL_2_800
-#define CONFIG_SYS_DDR_TIMING_4	CONFIG_SYS_DDR_TIMING_4_800
-#define CONFIG_SYS_DDR_TIMING_5	CONFIG_SYS_DDR_TIMING_5_800
-#endif
-
-/* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR	CONFIG_SYS_CCSRBAR_DEFAULT
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR_DEFAULT
-
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR
-
-/* DSP CCSRBAR */
-#define CONFIG_SYS_FSL_DSP_CCSRBAR	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
-#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS	CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
-
-/*
- * IFC Definitions
- */
-/* NOR Flash on IFC */
-
-#define CONFIG_SYS_FLASH_BASE		0x88000000
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* Max number of sector: 32M */
-
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_SYS_NOR_CSPR	0x88000101
-#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
-#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(5)
-/* NOR Flash Timing Params */
-
-#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x01) \
-				| FTIM0_NOR_TEADC(0x03) \
-				| FTIM0_NOR_TAVDS(0x00) \
-				| FTIM0_NOR_TEAHC(0x0f))
-#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1d) \
-				| FTIM1_NOR_TRAD_NOR(0x09) \
-				| FTIM1_NOR_TSEQRAD_NOR(0x09))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x1) \
-				| FTIM2_NOR_TCH(0x4) \
-				| FTIM2_NOR_TWPH(0x7) \
-				| FTIM2_NOR_TWP(0x1e))
-#define CONFIG_SYS_NOR_FTIM3	0x0
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-/* CFI for NOR Flash */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* NAND Flash on IFC */
-#define CONFIG_SYS_NAND_BASE		0xff800000
-#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
-
-#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
-				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
-				| CSPR_V)
-#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
-
-#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
-				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
-				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
-				| CSOR_NAND_RAL_2	/* RAL = 2Byes */ \
-				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
-				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
-				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
-
-/* NAND Flash Timing Params */
-#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x03) \
-					| FTIM0_NAND_TWP(0x05) \
-					| FTIM0_NAND_TWCHT(0x02) \
-					| FTIM0_NAND_TWH(0x04))
-#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x1c) \
-					| FTIM1_NAND_TWBE(0x1e) \
-					| FTIM1_NAND_TRR(0x07) \
-					| FTIM1_NAND_TRP(0x05))
-#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x08) \
-					| FTIM2_NAND_TREH(0x04) \
-					| FTIM2_NAND_TWHRE(0x11))
-#define CONFIG_SYS_NAND_FTIM3		FTIM3_NAND_TWW(0x04)
-
-#define CONFIG_SYS_NAND_DDR_LAW		11
-
-/* NAND */
-#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_FSL_QIXIS
-#endif
-#ifdef CONFIG_FSL_QIXIS
-#define CONFIG_SYS_FPGA_BASE	0xffb00000
-#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
-#define QIXIS_BASE	CONFIG_SYS_FPGA_BASE
-#define QIXIS_LBMAP_SWITCH	9
-#define QIXIS_LBMAP_MASK	0x07
-#define QIXIS_LBMAP_SHIFT	0
-#define QIXIS_LBMAP_DFLTBANK		0x00
-#define QIXIS_LBMAP_ALTBANK		0x04
-#define QIXIS_RST_CTL_RESET		0x83
-#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
-#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
-#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
-
-#define CONFIG_SYS_FPGA_BASE_PHYS	CONFIG_SYS_FPGA_BASE
-
-#define CONFIG_SYS_CSPR2		(CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
-					| CSPR_PORT_SIZE_8 \
-					| CSPR_MSEL_GPCM \
-					| CSPR_V)
-#define CONFIG_SYS_AMASK2		IFC_AMASK(64*1024)
-#define CONFIG_SYS_CSOR2		0x0
-/* CPLD Timing parameters for IFC CS3 */
-#define CONFIG_SYS_CS2_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
-					FTIM0_GPCM_TEADC(0x0e) | \
-					FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS2_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \
-					FTIM1_GPCM_TRAD(0x1f))
-#define CONFIG_SYS_CS2_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
-					FTIM2_GPCM_TCH(0x8) | \
-					FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS2_FTIM3		0x0
-#endif
-
-/* Set up IFC registers for boot location NOR/NAND */
-#if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
-#else
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000 /* End of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
-						- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc*/
-
-/* Serial Port */
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)
-#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR + 0x4700)
-#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR + 0x4800)
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400800 /* I2C speed and slave address*/
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_SPEED	400800 /* I2C speed and slave address*/
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-
-/* I2C EEPROM */
-#define CONFIG_ID_EEPROM
-#ifdef CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
-/* enable read and write access to EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-
-/* I2C FPGA */
-#define CONFIG_I2C_FPGA
-#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
-
-#define CONFIG_RTC_DS3231
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-
-/*
- * SPI interface will not be available in case of NAND boot SPI CS0 will be
- * used for SLIC
- */
-/* eSPI - Enhanced SPI */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
-#define CONFIG_TSEC1	1
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC2	1
-#define CONFIG_TSEC2_NAME	"eTSEC2"
-
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-
-#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-/* TBI PHY configuration for SGMII mode */
-#define CONFIG_TSEC_TBICR_SETTINGS ( \
-		TBICR_PHY_RESET \
-		| TBICR_ANEG_ENABLE \
-		| TBICR_FULL_DUPLEX \
-		| TBICR_SPEED1_SET \
-		)
-
-#endif	/* CONFIG_TSEC_ENET */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_HAS_FSL_DR_USB
-#endif
-
-/*
- * Environment
- */
-#if defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#elif defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
-#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
-#endif
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Dynamic MTD Partition support with mtdparts
- */
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_HOSTNAME		"BSC9132qds"
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	"u-boot.bin"
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_DEF_HWCONFIG	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
-#else
-#define CONFIG_DEF_HWCONFIG	"hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
-#endif
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"netdev=eth0\0"						\
-	"uboot=" CONFIG_UBOOTPATH "\0"				\
-	"loadaddr=1000000\0"			\
-	"bootfile=uImage\0"	\
-	"consoledev=ttyS0\0"				\
-	"ramdiskaddr=2000000\0"			\
-	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
-	"fdtaddr=1e00000\0"				\
-	"fdtfile=bsc9132qds.dtb\0"		\
-	"bdev=sda1\0"	\
-	CONFIG_DEF_HWCONFIG\
-	"othbootargs=mem=880M ramdisk_size=600000 " \
-		"default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
-		"isolcpus=0\0" \
-	"usbext2boot=setenv bootargs root=/dev/ram rw "	\
-		"console=$consoledev,$baudrate $othbootargs; "	\
-		"usb start;"			\
-		"ext2load usb 0:4 $loadaddr $bootfile;"		\
-		"ext2load usb 0:4 $fdtaddr $fdtfile;"	\
-		"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"	\
-		"bootm $loadaddr $ramdiskaddr $fdtaddr\0"	\
-	"debug_halt_off=mw ff7e0e30 0xf0000000;"
-
-#define CONFIG_NFSBOOTCOMMAND	\
-	"setenv bootargs root=/dev/nfs rw "	\
-	"nfsroot=$serverip:$rootpath "	\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=$consoledev,$baudrate $othbootargs;" \
-	"tftp $loadaddr $bootfile;"	\
-	"tftp $fdtaddr $fdtfile;"	\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_HDBOOT	\
-	"setenv bootargs root=/dev/$bdev rw rootdelay=30 "	\
-	"console=$consoledev,$baudrate $othbootargs;" \
-	"usb start;"	\
-	"ext2load usb 0:1 $loadaddr /boot/$bootfile;"	\
-	"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"	\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND		\
-	"setenv bootargs root=/dev/ram rw "	\
-	"console=$consoledev,$baudrate $othbootargs; "	\
-	"tftp $ramdiskaddr $ramdiskfile;"	\
-	"tftp $loadaddr $bootfile;"		\
-	"tftp $fdtaddr $fdtfile;"		\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
-
-#include <asm/fsl_secure_boot.h>
-
-#endif	/* __CONFIG_H */
-- 
2.25.1



More information about the U-Boot mailing list