[PATCH v14 13/20] riscv: Clean up IPI initialization code
Sean Anderson
seanga2 at gmail.com
Wed Jun 24 12:41:18 CEST 2020
The previous IPI code initialized the device whenever the first call was
made to a riscv_*_ipi function. This made it difficult to determine when
the IPI device was initialized. This patch introduces a new function
riscv_init_ipi. It is called once during arch_cpu_init_dm. In SPL, it is
called in spl_invoke_opensbi. Before this point, no riscv_*_ipi functions
should be called.
Signed-off-by: Sean Anderson <seanga2 at gmail.com>
Reviewed-by: Rick Chen <rick at andestech.com>
---
Changes in v12:
- Remove sanity check as requested
Changes in v11:
- Initialize IPI when used by SPL
Changes in v9:
- Fix type of ret variable in riscv_ipi_init
Changes in v7:
- Split IPI clearing off into its own patch
Changes in v6:
- Fix some formatting
- Clear IPIs before enabling interrupts instead of using a ipi_ready flag
- Only print messages on error in smp code
Changes in v5:
- New
arch/riscv/cpu/cpu.c | 6 +++++
arch/riscv/include/asm/smp.h | 43 ++++++++++++++++++++++++++++++
arch/riscv/lib/andes_plic.c | 34 +++++++++---------------
arch/riscv/lib/sbi_ipi.c | 5 ++++
arch/riscv/lib/sifive_clint.c | 33 ++++++++---------------
arch/riscv/lib/smp.c | 49 +++++------------------------------
common/spl/spl_opensbi.c | 5 ++++
7 files changed, 89 insertions(+), 86 deletions(-)
diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
index 5804aa8e73..d75a3f045a 100644
--- a/arch/riscv/cpu/cpu.c
+++ b/arch/riscv/cpu/cpu.c
@@ -98,6 +98,12 @@ int arch_cpu_init_dm(void)
csr_write(CSR_SATP, 0);
}
+#ifdef CONFIG_SMP
+ ret = riscv_init_ipi();
+ if (ret)
+ return ret;
+#endif
+
return 0;
}
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 74de92ed13..1b428856b2 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -51,4 +51,47 @@ void handle_ipi(ulong hart);
*/
int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait);
+/**
+ * riscv_init_ipi() - Initialize inter-process interrupt (IPI) driver
+ *
+ * Platform code must provide this function. This function is called once after
+ * the cpu driver is initialized. No other riscv_*_ipi() calls will be made
+ * before this function is called.
+ *
+ * @return 0 if OK, -ve on error
+ */
+int riscv_init_ipi(void);
+
+/**
+ * riscv_send_ipi() - Send inter-processor interrupt (IPI)
+ *
+ * Platform code must provide this function.
+ *
+ * @hart: Hart ID of receiving hart
+ * @return 0 if OK, -ve on error
+ */
+int riscv_send_ipi(int hart);
+
+/**
+ * riscv_clear_ipi() - Clear inter-processor interrupt (IPI)
+ *
+ * Platform code must provide this function.
+ *
+ * @hart: Hart ID of hart to be cleared
+ * @return 0 if OK, -ve on error
+ */
+int riscv_clear_ipi(int hart);
+
+/**
+ * riscv_get_ipi() - Get status of inter-processor interrupt (IPI)
+ *
+ * Platform code must provide this function.
+ *
+ * @hart: Hart ID of hart to be checked
+ * @pending: Pointer to variable with result of the check,
+ * 1 if IPI is pending, 0 otherwise
+ * @return 0 if OK, -ve on error
+ */
+int riscv_get_ipi(int hart, int *pending);
+
#endif
diff --git a/arch/riscv/lib/andes_plic.c b/arch/riscv/lib/andes_plic.c
index 20529ab3eb..5cf29df670 100644
--- a/arch/riscv/lib/andes_plic.c
+++ b/arch/riscv/lib/andes_plic.c
@@ -30,20 +30,6 @@
#define SEND_IPI_TO_HART(hart) (0x80 >> (hart))
DECLARE_GLOBAL_DATA_PTR;
-static int init_plic(void);
-
-#define PLIC_BASE_GET(void) \
- do { \
- long *ret; \
- \
- if (!gd->arch.plic) { \
- ret = syscon_get_first_range(RISCV_SYSCON_PLIC); \
- if (IS_ERR(ret)) \
- return PTR_ERR(ret); \
- gd->arch.plic = ret; \
- init_plic(); \
- } \
- } while (0)
static int enable_ipi(int hart)
{
@@ -93,13 +79,21 @@ static int init_plic(void)
return -ENODEV;
}
+int riscv_init_ipi(void)
+{
+ long *ret = syscon_get_first_range(RISCV_SYSCON_PLIC);
+
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+ gd->arch.plic = ret;
+
+ return init_plic();
+}
+
int riscv_send_ipi(int hart)
{
- unsigned int ipi;
+ unsigned int ipi = (SEND_IPI_TO_HART(hart) << (8 * gd->arch.boot_hart));
- PLIC_BASE_GET();
-
- ipi = (SEND_IPI_TO_HART(hart) << (8 * gd->arch.boot_hart));
writel(ipi, (void __iomem *)PENDING_REG(gd->arch.plic,
gd->arch.boot_hart));
@@ -110,8 +104,6 @@ int riscv_clear_ipi(int hart)
{
u32 source_id;
- PLIC_BASE_GET();
-
source_id = readl((void __iomem *)CLAIM_REG(gd->arch.plic, hart));
writel(source_id, (void __iomem *)CLAIM_REG(gd->arch.plic, hart));
@@ -120,8 +112,6 @@ int riscv_clear_ipi(int hart)
int riscv_get_ipi(int hart, int *pending)
{
- PLIC_BASE_GET();
-
*pending = readl((void __iomem *)PENDING_REG(gd->arch.plic,
gd->arch.boot_hart));
*pending = !!(*pending & SEND_IPI_TO_HART(hart));
diff --git a/arch/riscv/lib/sbi_ipi.c b/arch/riscv/lib/sbi_ipi.c
index abafca9e5c..d02e2b4c48 100644
--- a/arch/riscv/lib/sbi_ipi.c
+++ b/arch/riscv/lib/sbi_ipi.c
@@ -8,6 +8,11 @@
#include <asm/encoding.h>
#include <asm/sbi.h>
+int riscv_init_ipi(void)
+{
+ return 0;
+}
+
int riscv_send_ipi(int hart)
{
ulong mask;
diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c
index 5e0d25720b..78fc6c868d 100644
--- a/arch/riscv/lib/sifive_clint.c
+++ b/arch/riscv/lib/sifive_clint.c
@@ -24,22 +24,8 @@
DECLARE_GLOBAL_DATA_PTR;
-#define CLINT_BASE_GET(void) \
- do { \
- long *ret; \
- \
- if (!gd->arch.clint) { \
- ret = syscon_get_first_range(RISCV_SYSCON_CLINT); \
- if (IS_ERR(ret)) \
- return PTR_ERR(ret); \
- gd->arch.clint = ret; \
- } \
- } while (0)
-
int riscv_get_time(u64 *time)
{
- CLINT_BASE_GET();
-
*time = readq((void __iomem *)MTIME_REG(gd->arch.clint));
return 0;
@@ -47,17 +33,24 @@ int riscv_get_time(u64 *time)
int riscv_set_timecmp(int hart, u64 cmp)
{
- CLINT_BASE_GET();
-
writeq(cmp, (void __iomem *)MTIMECMP_REG(gd->arch.clint, hart));
return 0;
}
+int riscv_init_ipi(void)
+{
+ long *ret = syscon_get_first_range(RISCV_SYSCON_CLINT);
+
+ if (IS_ERR(ret))
+ return PTR_ERR(ret);
+ gd->arch.clint = ret;
+
+ return 0;
+}
+
int riscv_send_ipi(int hart)
{
- CLINT_BASE_GET();
-
writel(1, (void __iomem *)MSIP_REG(gd->arch.clint, hart));
return 0;
@@ -65,8 +58,6 @@ int riscv_send_ipi(int hart)
int riscv_clear_ipi(int hart)
{
- CLINT_BASE_GET();
-
writel(0, (void __iomem *)MSIP_REG(gd->arch.clint, hart));
return 0;
@@ -74,8 +65,6 @@ int riscv_clear_ipi(int hart)
int riscv_get_ipi(int hart, int *pending)
{
- CLINT_BASE_GET();
-
*pending = readl((void __iomem *)MSIP_REG(gd->arch.clint, hart));
return 0;
diff --git a/arch/riscv/lib/smp.c b/arch/riscv/lib/smp.c
index 17adb35730..ac22136314 100644
--- a/arch/riscv/lib/smp.c
+++ b/arch/riscv/lib/smp.c
@@ -12,38 +12,6 @@
DECLARE_GLOBAL_DATA_PTR;
-/**
- * riscv_send_ipi() - Send inter-processor interrupt (IPI)
- *
- * Platform code must provide this function.
- *
- * @hart: Hart ID of receiving hart
- * @return 0 if OK, -ve on error
- */
-extern int riscv_send_ipi(int hart);
-
-/**
- * riscv_clear_ipi() - Clear inter-processor interrupt (IPI)
- *
- * Platform code must provide this function.
- *
- * @hart: Hart ID of hart to be cleared
- * @return 0 if OK, -ve on error
- */
-extern int riscv_clear_ipi(int hart);
-
-/**
- * riscv_get_ipi() - Get status of inter-processor interrupt (IPI)
- *
- * Platform code must provide this function.
- *
- * @hart: Hart ID of hart to be checked
- * @pending: Pointer to variable with result of the check,
- * 1 if IPI is pending, 0 otherwise
- * @return 0 if OK, -ve on error
- */
-extern int riscv_get_ipi(int hart, int *pending);
-
static int send_ipi_many(struct ipi_data *ipi, int wait)
{
ofnode node, cpus;
@@ -124,7 +92,7 @@ void handle_ipi(ulong hart)
*/
ret = riscv_clear_ipi(hart);
if (ret) {
- pr_err("Cannot clear IPI of hart %ld\n", hart);
+ pr_err("Cannot clear IPI of hart %ld (error %d)\n", hart, ret);
return;
}
@@ -133,14 +101,11 @@ void handle_ipi(ulong hart)
int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait)
{
- int ret = 0;
- struct ipi_data ipi;
+ struct ipi_data ipi = {
+ .addr = addr,
+ .arg0 = arg0,
+ .arg1 = arg1,
+ };
- ipi.addr = addr;
- ipi.arg0 = arg0;
- ipi.arg1 = arg1;
-
- ret = send_ipi_many(&ipi, wait);
-
- return ret;
+ return send_ipi_many(&ipi, wait);
}
diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c
index e88136e6f3..defddac8f2 100644
--- a/common/spl/spl_opensbi.c
+++ b/common/spl/spl_opensbi.c
@@ -79,6 +79,11 @@ void spl_invoke_opensbi(struct spl_image_info *spl_image)
invalidate_icache_all();
#ifdef CONFIG_SPL_SMP
+ /* Initialize the IPI before we use it */
+ ret = riscv_init_ipi();
+ if (ret)
+ hang();
+
/*
* Start OpenSBI on all secondary harts and wait for acknowledgment.
*
--
2.26.2
More information about the U-Boot
mailing list