[PATCH 6/7] arm: juno: Enable PCI

[Andre Przywara]

The ARM Juno boards in their -r1 and -r2 variants sport a PCIe
controller, which we configure already in board specific code to be ECAM
compliant. Hence we can just enable the generic ECAM driver to let
U-Boot use PCIe devices.

Add the respective options to the Juno defconfig to enable the PCI
framework and the generic ECAM driver, and initialise the driver upon
loading U-Boot.

Make some functions in the Juno PCIe init code static on the way.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 board/armltd/vexpress64/pcie.c         | 14 +++++++++-----
 configs/vexpress_aemv8a_juno_defconfig |  5 +++++
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/board/armltd/vexpress64/pcie.c b/board/armltd/vexpress64/pcie.c
index 02de58b360..733b190e59 100644
--- a/board/armltd/vexpress64/pcie.c
+++ b/board/armltd/vexpress64/pcie.c
@@ -72,9 +72,9 @@
 					 JUNO_RESET_STATUS_PHY | \
 					 JUNO_RESET_STATUS_RC)
 
-void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr,
-			unsigned long trsl_addr, int window_size,
-			int trsl_param)
+static void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr,
+				 unsigned long trsl_addr, int window_size,
+				 int trsl_param)
 {
 	/* X3PCI_ATR_SRC_ADDR_LOW:
 	     - bit 0: enable entry,
@@ -94,7 +94,7 @@ void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr,
 	       ((u64)1) << window_size, trsl_param);
 }
 
-void xr3pci_setup_atr(void)
+static void xr3pci_setup_atr(void)
 {
 	/* setup PCIe to CPU address translation tables */
 	unsigned long base = XR3_CONFIG_BASE + XR3PCI_ATR_PCIE_WIN0;
@@ -141,7 +141,7 @@ void xr3pci_setup_atr(void)
 			     XR3_PCI_MEMSPACE64_SIZE, XR3PCI_ATR_TRSLID_PCIE_MEMORY);
 }
 
-void xr3pci_init(void)
+static void xr3pci_init(void)
 {
 	u32 val;
 	int timeout = 200;
@@ -193,5 +193,9 @@ void xr3pci_init(void)
 
 void vexpress64_pcie_init(void)
 {
+	/* Initialise and configure the PCIe host bridge. */
 	xr3pci_init();
+
+	/* Register the now ECAM complaint PCIe host controller with U-Boot. */
+	pci_init();
 }
diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig
index 49acb34310..4866a0e9d5 100644
--- a/configs/vexpress_aemv8a_juno_defconfig
+++ b/configs/vexpress_aemv8a_juno_defconfig
@@ -32,6 +32,11 @@ CONFIG_CMD_UBI=y
 # CONFIG_ISO_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 CONFIG_OF_BOARD=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCIE_ECAM_GENERIC=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_CMD_PCI=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xBFC0000
 # CONFIG_MMC is not set
-- 
2.17.5