microSD Breakout Port

[Faruk Kılavuz]

Hello

This is my first mail. I tried running uart-0 with microsd breakout method. I have added the following codes to open the F port.

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 40a3f845d0..9140b35450 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -181,6 +181,7 @@ enum sunxi_gpio_number {
 #define SUNXI_GPF_SDC0         2
 #define SUNXI_GPF_UART0              4
 #define SUN8I_GPF_UART0                3
+#define SUN50I_GPF_UART0       3

 #define SUN4I_GPG_SDC1         4
 #define SUN5I_GPG_SDC1         2
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index b74eaf2a0e..019c9b9296 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -76,6 +76,9 @@ static int gpio_init(void)
 #if defined(CONFIG_MACH_SUN8I) && !defined(CONFIG_MACH_SUN8I_R40)
        sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
        sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
+#elif defined(CONFIG_MACH_SUN50I)
+       sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN50I_GPF_UART0);
+       sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN50I_GPF_UART0);
 #else
        sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0);
        sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);


Should I send this code as a u-boot patch? Thanks