[PATCH v2 38/49] rockchip: Makefile: Drop explicit targets built by binman

[Simon Glass]

On rockchip various files that need to be created by binman. It does not
make sense to enumerate these in the Makefile. They are described in the
configuration (devicetree) for each board and we can simply run binman
(always) to generate them.

This avoid sprinkling the Makefile with arch-specific code.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v1)

 Makefile | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/Makefile b/Makefile
index 96ab26a638..7009eb7be7 100644
--- a/Makefile
+++ b/Makefile
@@ -939,8 +939,19 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
 INPUTS-y += u-boot-with-dtb.bin
 endif
 
-ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
-INPUTS-y += u-boot-rockchip.bin idbloader.img
+ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
+# On ARM64 this target is produced by binman so we don't need this dep
+ifeq ($(CONFIG_ARM64),y)
+ifeq ($(CONFIG_SPL),y)
+# TODO: Get binman to generate this too
+INPUTS-y += u-boot-rockchip.bin
+endif
+else
+ifeq ($(CONFIG_SPL),y)
+# Generate these inputs for binman which will create the output files
+INPUTS-y += idbloader.img u-boot.img
+endif
+endif
 endif
 
 INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
@@ -1457,10 +1468,7 @@ idbloader.img: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 endif
 
-ifeq ($(CONFIG_ARM64),)
-u-boot-rockchip.bin: idbloader.img u-boot.img FORCE
-	$(call if_changed,binman)
-else
+ifeq ($(CONFIG_ARM64),y)
 OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
 	--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
 u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
-- 
2.27.0.290.gba653c62da-goog