[PATCH v4 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE

[Bin Meng]

From: Bin Meng <bin.meng at windriver.com>

Starting from OpenSBI v0.7, the SBI firmware inserts/fixes up the
reserved memory node for PMP protected memory regions. All RISC-V
boards need to copy the reserved memory node from the device tree
provided by the firmware to the device tree used by U-Boot.

Turn on CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE.

Signed-off-by: Bin Meng <bin.meng at windriver.com>
Reviewed-by: Atish Patra <atish.patra at wdc.com>
---

Changes in v4:
- /s/needs/need in the commit message

Changes in v3:
- change to "default y if OF_SEPARATE"

 arch/riscv/Kconfig             | 3 +++
 configs/sifive_fu540_defconfig | 1 -
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d9854f5..ff8a9f8 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -273,4 +273,7 @@ config STACK_SIZE_SHIFT
 	int
 	default 14
 
+config OF_BOARD_FIXUP
+	default y if OF_SEPARATE
+
 endmenu
diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig
index 8d412f8..32347c2 100644
--- a/configs/sifive_fu540_defconfig
+++ b/configs/sifive_fu540_defconfig
@@ -16,7 +16,6 @@ CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_OF_BOARD_FIXUP=y
 CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_CLK=y
-- 
2.7.4