[PATCH v3 01/14] arm: add mach-nexell (header files)

Stefan Bosch stefan_b at posteo.net
Mon Jun 29 19:46:33 CEST 2020


Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- DM_VIDEO support (display_dev.h).
- boot0.h added, handles NSIH --> tools/nexell obsolete.
- gpio.h: Include-path to errno.h changed.

Signed-off-by: Stefan Bosch <stefan_b at posteo.net>
---

(no changes since v2)

Changes in v2:
- cosmetic: additional GPL license text removed, SPDX-License-Identifier
  is enough.

 arch/arm/mach-nexell/include/mach/boot0.h        |  40 +++
 arch/arm/mach-nexell/include/mach/clk.h          |  24 ++
 arch/arm/mach-nexell/include/mach/display.h      | 273 +++++++++++++++
 arch/arm/mach-nexell/include/mach/display_dev.h  |  37 ++
 arch/arm/mach-nexell/include/mach/ehci.h         | 106 ++++++
 arch/arm/mach-nexell/include/mach/gpio.h         |  17 +
 arch/arm/mach-nexell/include/mach/mipi_display.h | 215 ++++++++++++
 arch/arm/mach-nexell/include/mach/nexell.h       | 352 +++++++++++++++++++
 arch/arm/mach-nexell/include/mach/nx_gpio.h      | 103 ++++++
 arch/arm/mach-nexell/include/mach/reset.h        |  19 +
 arch/arm/mach-nexell/include/mach/sec_reg.h      |  15 +
 arch/arm/mach-nexell/include/mach/tieoff.h       | 423 +++++++++++++++++++++++
 12 files changed, 1624 insertions(+)
 create mode 100644 arch/arm/mach-nexell/include/mach/boot0.h
 create mode 100644 arch/arm/mach-nexell/include/mach/clk.h
 create mode 100644 arch/arm/mach-nexell/include/mach/display.h
 create mode 100644 arch/arm/mach-nexell/include/mach/display_dev.h
 create mode 100644 arch/arm/mach-nexell/include/mach/ehci.h
 create mode 100644 arch/arm/mach-nexell/include/mach/gpio.h
 create mode 100644 arch/arm/mach-nexell/include/mach/mipi_display.h
 create mode 100644 arch/arm/mach-nexell/include/mach/nexell.h
 create mode 100644 arch/arm/mach-nexell/include/mach/nx_gpio.h
 create mode 100644 arch/arm/mach-nexell/include/mach/reset.h
 create mode 100644 arch/arm/mach-nexell/include/mach/sec_reg.h
 create mode 100644 arch/arm/mach-nexell/include/mach/tieoff.h

diff --git a/arch/arm/mach-nexell/include/mach/boot0.h b/arch/arm/mach-nexell/include/mach/boot0.h
new file mode 100644
index 0000000..e05c07e
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/boot0.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * NSIH (Nexell System Information Header) for FriendlyArm nanopi2 board
+ *
+ * The NSIH (first 512 Bytes of u-boot.bin) is necessary for the
+ * 2nd-Bootloader to get information like load address of U-Boot.
+ *
+ * 0x400 must be added to CONFIG_SYS_TEXT_BASE to have the actual load and
+ * start address because 2nd-Bootloader loads with an offset of 0x400
+ * (NSIH + 0x200 bytes are not loaded into RAM).
+ *
+ * It has been tested / is working with the following 2nd-Bootloader:
+ * "BL1 by Nexell V1.0.0-gd551e13 [Built on 2018-01-25 16:58:29]"
+ *
+ * (C) Copyright 2020 Stefan Bosch <stefan_b at posteo.net>
+ */
+
+#ifndef __BOOT0_H
+#define __BOOT0_H
+
+	ARM_VECTORS
+	.space	0x30
+	.word	(_end - _start) + 20 * 1024	/* 0x50: load size
+						 *       (bin + 20k for DTB) */
+	.space	0x4
+	.word	CONFIG_SYS_TEXT_BASE + 0x400	/* 0x58: load address */
+	.word	0x00000000
+	.word	CONFIG_SYS_TEXT_BASE + 0x400	/* 0x60: start address */
+	.space	0x198
+	.byte	'N'				/* 0x1FC: "NSIH" signature */
+	.byte	'S'
+	.byte	'I'
+	.byte	'H'
+
+	/* The NSIH + 0x200 bytes are omitted by the 2nd-Bootloader */
+	.space	0x200
+_start:
+	ARM_VECTORS
+
+#endif /* __BOOT0_H */
diff --git a/arch/arm/mach-nexell/include/mach/clk.h b/arch/arm/mach-nexell/include/mach/clk.h
new file mode 100644
index 0000000..cc5589a
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/clk.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung at nexell.co.kr>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+struct clk {
+	unsigned long rate;
+};
+
+void clk_init(void);
+
+struct clk *clk_get(const char *id);
+void clk_put(struct clk *clk);
+unsigned long clk_get_rate(struct clk *clk);
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_rate(struct clk *clk, unsigned long rate);
+int clk_enable(struct clk *clk);
+void clk_disable(struct clk *clk);
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/display.h b/arch/arm/mach-nexell/include/mach/display.h
new file mode 100644
index 0000000..b167e63
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/display.h
@@ -0,0 +1,273 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2016  Nexell Co., Ltd.
+ *
+ * Author: junghyun, kim <jhkim at nexell.co.kr>
+ */
+
+#ifndef _NX__DISPLAY_H_
+#define _NX__DISPLAY_H_
+
+#define	DP_PLANS_NUM	3
+
+/* the display output format. */
+#define	DPC_FORMAT_RGB555		0  /* RGB555 Format */
+#define	DPC_FORMAT_RGB565		1  /* RGB565 Format */
+#define	DPC_FORMAT_RGB666		2  /* RGB666 Format */
+#define	DPC_FORMAT_RGB888		3  /* RGB888 Format */
+#define	DPC_FORMAT_MRGB555A		4  /* MRGB555A Format */
+#define	DPC_FORMAT_MRGB555B		5  /* MRGB555B Format */
+#define	DPC_FORMAT_MRGB565		6  /* MRGB565 Format */
+#define	DPC_FORMAT_MRGB666		7  /* MRGB666 Format */
+#define	DPC_FORMAT_MRGB888A		8  /* MRGB888A Format */
+#define	DPC_FORMAT_MRGB888B		9  /* MRGB888B Format */
+#define	DPC_FORMAT_CCIR656		10 /* ITU-R BT.656 / 601(8-bit) */
+#define	DPC_FORMAT_CCIR601A		12 /* ITU-R BT.601A */
+#define	DPC_FORMAT_CCIR601B		13 /* ITU-R BT.601B */
+#define	DPC_FORMAT_4096COLOR	1  /* 4096 Color Format */
+#define	DPC_FORMAT_16GRAY		3  /* 16 Level Gray Format */
+
+/* layer pixel format. */
+#define	MLC_RGBFMT_R5G6B5		0x44320000	/* {R5,G6,B5 }. */
+#define	MLC_RGBFMT_B5G6R5		0xC4320000  /* {B5,G6,R5 }. */
+#define	MLC_RGBFMT_X1R5G5B5		0x43420000  /* {X1,R5,G5,B5}. */
+#define	MLC_RGBFMT_X1B5G5R5		0xC3420000  /* {X1,B5,G5,R5}. */
+#define	MLC_RGBFMT_X4R4G4B4		0x42110000  /* {X4,R4,G4,B4}. */
+#define	MLC_RGBFMT_X4B4G4R4		0xC2110000	/* {X4,B4,G4,R4}. */
+#define	MLC_RGBFMT_X8R3G3B2		0x41200000	/* {X8,R3,G3,B2}. */
+#define	MLC_RGBFMT_X8B3G3R2		0xC1200000	/* {X8,B3,G3,R2}. */
+#define	MLC_RGBFMT_A1R5G5B5		0x33420000	/* {A1,R5,G5,B5}. */
+#define	MLC_RGBFMT_A1B5G5R5		0xB3420000	/* {A1,B5,G5,R5}. */
+#define	MLC_RGBFMT_A4R4G4B4		0x22110000	/* {A4,R4,G4,B4}. */
+#define	MLC_RGBFMT_A4B4G4R4		0xA2110000	/* {A4,B4,G4,R4}. */
+#define	MLC_RGBFMT_A8R3G3B2		0x11200000	/* {A8,R3,G3,B2}. */
+#define	MLC_RGBFMT_A8B3G3R2		0x91200000	/* {A8,B3,G3,R2}. */
+#define	MLC_RGBFMT_R8G8B8		0x46530000	/* {R8,G8,B8 }. */
+#define	MLC_RGBFMT_B8G8R8		0xC6530000	/* {B8,G8,R8 }. */
+#define	MLC_RGBFMT_X8R8G8B8		0x46530000	/* {X8,R8,G8,B8}. */
+#define	MLC_RGBFMT_X8B8G8R8		0xC6530000	/* {X8,B8,G8,R8}. */
+#define	MLC_RGBFMT_A8R8G8B8		0x06530000	/* {A8,R8,G8,B8}. */
+#define	MLC_RGBFMT_A8B8G8R8		0x86530000	/* {A8,B8,G8,R8}.  */
+
+/* the data output order in case of ITU-R BT.656 / 601. */
+#define	DPC_YCORDER_CBYCRY		0
+#define	DPC_YCORDER_CRYCBY		1
+#define	DPC_YCORDER_YCBYCR		2
+#define	DPC_YCORDER_YCRYCB		3
+
+/* the PAD output clock. */
+#define	DPC_PADCLKSEL_VCLK		0	/* VCLK */
+#define	DPC_PADCLKSEL_VCLK2		1	/* VCLK2 */
+
+/* display sync info for DPC */
+struct dp_sync_info {
+	int interlace;
+	int h_active_len;
+	int h_sync_width;
+	int h_back_porch;
+	int h_front_porch;
+	int h_sync_invert;	/* default active low */
+	int v_active_len;
+	int v_sync_width;
+	int v_back_porch;
+	int v_front_porch;
+	int v_sync_invert;	/* default active low */
+	int pixel_clock_hz;	/* HZ */
+};
+
+/* syncgen control (DPC) */
+#define	DP_SYNC_DELAY_RGB_PVD		(1 << 0)
+#define	DP_SYNC_DELAY_HSYNC_CP1		(1 << 1)
+#define	DP_SYNC_DELAY_VSYNC_FRAM	(1 << 2)
+#define	DP_SYNC_DELAY_DE_CP			(1 << 3)
+
+struct dp_ctrl_info {
+	/* clock gen */
+	int clk_src_lv0;
+	int clk_div_lv0;
+	int clk_src_lv1;
+	int clk_div_lv1;
+	/* scan format */
+	int interlace;
+	/* syncgen format */
+	unsigned int out_format;
+	int invert_field;	/* 0:normal(Low odd), 1:invert (low even) */
+	int swap_RB;
+	unsigned int yc_order;	/* for CCIR output */
+	/* extern sync delay */
+	int delay_mask;		/* if 0, set defalut delays */
+	int d_rgb_pvd;		/* delay for RGB/PVD, 0~16, default  0 */
+	int d_hsync_cp1;	/* delay for HSYNC/CP1, 0~63, default 12 */
+	int d_vsync_fram;	/* delay for VSYNC/FRAM, 0~63, default 12 */
+	int d_de_cp2;		/* delay for DE/CP2, 0~63, default 12 */
+	/* sync offset */
+	int vs_start_offset;	/* start vsync offset, defatult 0 */
+	int vs_end_offset;	/* end vsync offset, default 0 */
+	int ev_start_offset;	/* start even vsync offset, default 0 */
+	int ev_end_offset;	/* end even vsync offset , default 0 */
+	/* pad clock seletor */
+	int vck_select;		/* 0=vclk0, 1=vclk2 */
+	int clk_inv_lv0;	/* OUTCLKINVn */
+	int clk_delay_lv0;	/* OUTCLKDELAYn */
+	int clk_inv_lv1;	/* OUTCLKINVn */
+	int clk_delay_lv1;	/* OUTCLKDELAYn */
+	int clk_sel_div1;	/* 0=clk1_inv, 1=clk1_div_2_ns */
+};
+
+/* multi layer control (MLC) */
+struct dp_plane_top {
+	int screen_width;
+	int screen_height;
+	int video_prior;	/* 0: video>RGBn, 1: RGB0>video>RGB1,
+				 *                2: RGB0 > RGB1 > video .. */
+	int interlace;
+	int plane_num;
+	unsigned int back_color;
+};
+
+struct dp_plane_info {
+	int layer;
+	unsigned int fb_base;
+	int left;
+	int top;
+	int width;
+	int height;
+	int pixel_byte;
+	unsigned int format;
+	int alpha_on;
+	int alpha_depth;
+	int tp_on;			/* transparency color enable */
+	unsigned int tp_color;
+	unsigned int mem_lock_size;	/* memory burst access (4,8,16) */
+	int video_layer;
+	int enable;
+};
+
+/*
+ * LCD device dependency struct
+ * RGB, LVDS, MiPi, HDMI
+ */
+enum {
+	DP_DEVICE_RESCONV = 0,
+	DP_DEVICE_RGBLCD = 1,
+	DP_DEVICE_HDMI = 2,
+	DP_DEVICE_MIPI = 3,
+	DP_DEVICE_LVDS = 4,
+	DP_DEVICE_CVBS = 5,
+	DP_DEVICE_DP0 = 6,
+	DP_DEVICE_DP1 = 7,
+	DP_DEVICE_END,
+};
+
+enum {
+	DP_CLOCK_RESCONV = 0,
+	DP_CLOCK_LCDIF = 1,
+	DP_CLOCK_MIPI = 2,
+	DP_CLOCK_LVDS = 3,
+	DP_CLOCK_HDMI = 4,
+	DP_CLOCK_END,
+};
+
+enum dp_lvds_format {
+	DP_LVDS_FORMAT_VESA = 0,
+	DP_LVDS_FORMAT_JEIDA = 1,
+	DP_LVDS_FORMAT_LOC = 2,
+};
+
+#define	DEF_VOLTAGE_LEVEL	(0x20)
+
+struct dp_lvds_dev {
+	enum dp_lvds_format lvds_format; /* 0:VESA, 1:JEIDA, 2: Location */
+	int pol_inv_hs;		/* hsync polarity invert for VESA, JEIDA */
+	int pol_inv_vs;		/* bsync polarity invert for VESA, JEIDA */
+	int pol_inv_de;		/* de polarity invert for VESA, JEIDA */
+	int pol_inv_ck;		/* input clock(pixel clock) polarity invert */
+	int voltage_level;
+	/* Location setting */
+	unsigned int loc_map[9];	/* Location Setting */
+	unsigned int loc_mask[2];	/* Location Setting, 0 ~ 34 */
+	unsigned int loc_pol[2];	/* Location Setting, 0 ~ 34 */
+};
+
+#include "mipi_display.h"
+
+struct dp_mipi_dev {
+	int lp_bitrate;	/* to lcd setup, low power bitrate (150, 100, 80 Mhz) */
+	int hs_bitrate; /* to lcd data, high speed bitrate (1000, ... Mhz) */
+	int lpm_trans;
+	int command_mode;
+	unsigned int hs_pllpms;
+	unsigned int hs_bandctl;
+	unsigned int lp_pllpms;
+	unsigned int lp_bandctl;
+	struct mipi_dsi_device dsi;
+};
+
+struct dp_rgb_dev {
+	int lcd_mpu_type;
+};
+
+struct dp_hdmi_dev {
+	int preset;
+};
+
+/* platform data for the driver model */
+struct nx_display_platdata {
+	int module;
+	struct dp_sync_info sync;
+	struct dp_ctrl_info ctrl;
+	struct dp_plane_top top;
+	struct dp_plane_info plane[DP_PLANS_NUM];
+	int dev_type;
+	void *device;
+};
+
+/* Lcd api */
+void nx_lvds_display(int module,
+		     struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		     struct dp_plane_top *top,
+		     struct dp_plane_info *planes,
+		     struct dp_lvds_dev *dev);
+
+void nx_rgb_display(int module,
+		    struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		    struct dp_plane_top *top, struct dp_plane_info *planes,
+		    struct dp_rgb_dev *dev);
+
+void nx_hdmi_display(int module,
+		     struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		     struct dp_plane_top *top,
+		     struct dp_plane_info *planes,
+		     struct dp_hdmi_dev *dev);
+
+void nx_mipi_display(int module,
+		     struct dp_sync_info *sync, struct dp_ctrl_info *ctrl,
+		     struct dp_plane_top *top,
+		     struct dp_plane_info *planes,
+		     struct dp_mipi_dev *dev);
+
+int nx_mipi_dsi_lcd_bind(struct mipi_dsi_device *dsi);
+
+/* disaply api */
+void dp_control_init(int module);
+int  dp_control_setup(int module, struct dp_sync_info *sync,
+		      struct dp_ctrl_info *ctrl);
+void dp_control_enable(int module, int on);
+
+void dp_plane_init(int module);
+int  dp_plane_screen_setup(int module, struct dp_plane_top *top);
+void dp_plane_screen_enable(int module, int on);
+
+int  dp_plane_layer_setup(int module, struct dp_plane_info *plane);
+void dp_plane_layer_enable(int module, struct dp_plane_info *plane, int on);
+
+int dp_plane_set_enable(int module, int layer, int on);
+int dp_plane_set_address(int module, int layer, unsigned int address);
+int dp_plane_wait_vsync(int module, int layer, int fps);
+
+#if defined CONFIG_SPL_BUILD ||	\
+	(!defined(CONFIG_DM) && !defined(CONFIG_OF_CONTROL))
+int nx_display_probe(struct nx_display_platdata *plat);
+#endif
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/display_dev.h b/arch/arm/mach-nexell/include/mach/display_dev.h
new file mode 100644
index 0000000..77eb614
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/display_dev.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright (C) 2016  Nexell Co., Ltd.
+ *
+ * Author: junghyun, kim <jhkim at nexell.co.kr>
+ */
+
+#ifndef _NX__DISPLAY_DEV_H_
+#define _NX__DISPLAY_DEV_H_
+
+#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO
+#include <video_fb.h>
+#elif defined CONFIG_LCD
+#include <lcd.h>
+#endif
+
+struct nx_display_dev {
+#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO
+	GraphicDevice graphic_device;
+#elif defined CONFIG_LCD
+	vidinfo_t *panel_info;
+#endif
+	unsigned long base;
+	int module;
+	struct dp_sync_info sync;
+	struct dp_ctrl_info ctrl;
+	struct dp_plane_top top;
+	struct dp_plane_info planes[DP_PLANS_NUM];
+	int dev_type;
+	void *device;
+	struct dp_plane_info *fb_plane;
+	unsigned int depth;	/* byte per pixel */
+	unsigned int fb_addr;
+	unsigned int fb_size;
+};
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/ehci.h b/arch/arm/mach-nexell/include/mach/ehci.h
new file mode 100644
index 0000000..545153b
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/ehci.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * NEXELL USB HOST EHCI Controller
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung at nexell.co.kr>
+ */
+
+#ifndef __ASM_ARM_ARCH_EHCI_H__
+#define __ASM_ARM_ARCH_EHCI_H__
+
+/* Nexell USBHOST PHY registers */
+
+/* USBHOST Configuration 0 Register */
+#define NX_HOST_CON0				0x14
+#define NX_HOST_CON0_SS_WORD_IF			BIT(26)
+#define NX_HOST_CON0_SS_WORD_IF_ENB		BIT(25)
+#define NX_HOST_CON0_SS_WORD_IF_16 ( \
+	NX_HOST_CON0_SS_WORD_IF | \
+	NX_HOST_CON0_SS_WORD_IF_ENB)
+
+#define NX_HOST_CON0_HSIC_480M_FROM_OTG_PHY	BIT(24)
+#define NX_HOST_CON0_HSIC_FREE_CLOCK_ENB	BIT(23)
+#define NX_HOST_CON0_HSIC_CLK_MASK		(0x3 << 23)
+
+#define NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC	BIT(22)
+#define NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC	BIT(21)
+#define NX_HOST_CON0_N_HOST_PHY_RESET_SYNC	BIT(20)
+#define NX_HOST_CON0_UTMI_RESET_SYNC ( \
+	NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC | \
+	NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC | \
+	NX_HOST_CON0_N_HOST_PHY_RESET_SYNC)
+
+#define NX_HOST_CON0_N_AUXWELL_RESET_SYNC	BIT(19)
+#define NX_HOST_CON0_N_OHCI_RESET_SYNC		BIT(18)
+#define NX_HOST_CON0_N_RESET_SYNC		BIT(17)
+#define NX_HOST_CON0_AHB_RESET_SYNC ( \
+	NX_HOST_CON0_N_AUXWELL_RESET_SYNC | \
+	NX_HOST_CON0_N_OHCI_RESET_SYNC | \
+	NX_HOST_CON0_N_RESET_SYNC)
+
+#define NX_HOST_CON0_HSIC_EN_PORT1		(0x2 << 14)
+#define NX_HOST_CON0_HSIC_EN_MASK		(0x7 << 14)
+
+/* USBHOST Configuration 1 Register */
+#define NX_HOST_CON1				0x18
+
+/* USBHOST Configuration 2 Register */
+#define NX_HOST_CON2				0x1C
+#define NX_HOST_CON2_SS_ENA_INCRX_ALIGN		(0x1 << 28)
+#define NX_HOST_CON2_SS_ENA_INCR4		(0x1 << 27)
+#define NX_HOST_CON2_SS_ENA_INCR8		(0x1 << 26)
+#define NX_HOST_CON2_SS_ENA_INCR16		(0x1 << 25)
+#define NX_HOST_CON2_SS_DMA_BURST_MASK  \
+	(NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \
+	 NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_EHCI_SS_ENABLE_DMA_BURST \
+	(NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \
+	 NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_OHCI_SS_ENABLE_DMA_BURST \
+	(NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN)
+
+#define NX_HOST_CON2_SS_FLADJ_VAL_0_OFFSET	(21)
+#define NX_HOST_CON2_SS_FLADJ_VAL_OFFSET	(3)
+#define NX_HOST_CON2_SS_FLADJ_VAL_NUM		(6)
+#define NX_HOST_CON2_SS_FLADJ_VAL_0_SEL		BIT(5)
+#define NX_HOST_CON2_SS_FLADJ_VAL_MAX		0x7
+
+/* USBHOST Configuration 3 Register */
+#define NX_HOST_CON3				0x20
+#define NX_HOST_CON3_POR			BIT(8)
+#define NX_HOST_CON3_POR_ENB			BIT(7)
+#define NX_HOST_CON3_POR_MASK			(0x3 << 7)
+
+/* USBHOST Configuration 4 Register */
+#define NX_HOST_CON4				0x24
+#define NX_HOST_CON4_WORDINTERFACE		BIT(9)
+#define NX_HOST_CON4_WORDINTERFACE_ENB		BIT(8)
+#define NX_HOST_CON4_WORDINTERFACE_16 ( \
+	NX_HOST_CON4_WORDINTERFACE | \
+	NX_HOST_CON4_WORDINTERFACE_ENB)
+
+/* USBHOST Configuration 5 Register */
+#define NX_HOST_CON5				0x28
+#define NX_HOST_CON5_HSIC_POR			BIT(19)
+#define NX_HOST_CON5_HSIC_POR_ENB		BIT(18)
+#define NX_HOST_CON5_HSIC_POR_MASK		(0x3 << 18)
+
+/* USBHOST Configuration 6 Register */
+#define NX_HOST_CON6				0x2C
+#define NX_HOST_CON6_HSIC_WORDINTERFACE		BIT(13)
+#define NX_HOST_CON6_HSIC_WORDINTERFACE_ENB	BIT(12)
+#define NX_HOST_CON6_HSIC_WORDINTERFACE_16 ( \
+	NX_HOST_CON6_HSIC_WORDINTERFACE | \
+	NX_HOST_CON6_HSIC_WORDINTERFACE_ENB)
+
+/* Register map for PHY control */
+struct nx_usb_phy {
+	unsigned int reserved;
+	unsigned int others[4];
+	unsigned int usbhost_con[7];
+};
+
+#endif /* __ASM_ARM_ARCH_EHCI_H__ */
diff --git a/arch/arm/mach-nexell/include/mach/gpio.h b/arch/arm/mach-nexell/include/mach/gpio.h
new file mode 100644
index 0000000..7167d3c
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/gpio.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * DeokJin, Lee <truevirtue at nexell.co.kr>
+ */
+
+#ifndef __ASM_ARCH_NEXELL_GPIO_H
+#define __ASM_ARCH_NEXELL_GPIO_H
+
+#include <asm/io.h>
+#include <linux/errno.h>
+
+#define PIN_BASE		0
+
+#define MAX_GPIO_BANKS		5
+
+#endif /* __ASM_ARCH_NEXELL_GPIO_H */
diff --git a/arch/arm/mach-nexell/include/mach/mipi_display.h b/arch/arm/mach-nexell/include/mach/mipi_display.h
new file mode 100644
index 0000000..f3fdec6
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/mipi_display.h
@@ -0,0 +1,215 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Defines for Mobile Industry Processor Interface (MIPI(R))
+ * Display Working Group standards: DSI, DCS, DBI, DPI
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski at gmx.de>
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak at nokia.com>
+ */
+
+#ifndef MIPI_DISPLAY_H
+#define MIPI_DISPLAY_H
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+	MIPI_DSI_V_SYNC_START				= 0x01,
+	MIPI_DSI_V_SYNC_END				= 0x11,
+	MIPI_DSI_H_SYNC_START				= 0x21,
+	MIPI_DSI_H_SYNC_END				= 0x31,
+
+	MIPI_DSI_COLOR_MODE_OFF				= 0x02,
+	MIPI_DSI_COLOR_MODE_ON				= 0x12,
+	MIPI_DSI_SHUTDOWN_PERIPHERAL			= 0x22,
+	MIPI_DSI_TURN_ON_PERIPHERAL			= 0x32,
+
+	MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM		= 0x03,
+	MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM		= 0x13,
+	MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM		= 0x23,
+
+	MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM		= 0x04,
+	MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM		= 0x14,
+	MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM		= 0x24,
+
+	MIPI_DSI_DCS_SHORT_WRITE			= 0x05,
+	MIPI_DSI_DCS_SHORT_WRITE_PARAM			= 0x15,
+
+	MIPI_DSI_DCS_READ				= 0x06,
+
+	MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE		= 0x37,
+
+	MIPI_DSI_END_OF_TRANSMISSION			= 0x08,
+
+	MIPI_DSI_NULL_PACKET				= 0x09,
+	MIPI_DSI_BLANKING_PACKET			= 0x19,
+	MIPI_DSI_GENERIC_LONG_WRITE			= 0x29,
+	MIPI_DSI_DCS_LONG_WRITE				= 0x39,
+
+	MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20	= 0x0c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24		= 0x1c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16		= 0x2c,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_30			= 0x0d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_36			= 0x1d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12		= 0x3d,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_16			= 0x0e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_18			= 0x1e,
+	MIPI_DSI_PIXEL_STREAM_3BYTE_18			= 0x2e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_24			= 0x3e,
+};
+
+/* MIPI DSI Peripheral-to-Processor transaction types */
+enum {
+	MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT	= 0x02,
+	MIPI_DSI_RX_END_OF_TRANSMISSION			= 0x08,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE	= 0x11,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE	= 0x12,
+	MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE		= 0x1a,
+	MIPI_DSI_RX_DCS_LONG_READ_RESPONSE		= 0x1c,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE	= 0x21,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE	= 0x22,
+};
+
+/* MIPI DCS commands */
+enum {
+	MIPI_DCS_NOP			= 0x00,
+	MIPI_DCS_SOFT_RESET		= 0x01,
+	MIPI_DCS_GET_DISPLAY_ID		= 0x04,
+	MIPI_DCS_GET_RED_CHANNEL	= 0x06,
+	MIPI_DCS_GET_GREEN_CHANNEL	= 0x07,
+	MIPI_DCS_GET_BLUE_CHANNEL	= 0x08,
+	MIPI_DCS_GET_DISPLAY_STATUS	= 0x09,
+	MIPI_DCS_GET_POWER_MODE		= 0x0A,
+	MIPI_DCS_GET_ADDRESS_MODE	= 0x0B,
+	MIPI_DCS_GET_PIXEL_FORMAT	= 0x0C,
+	MIPI_DCS_GET_DISPLAY_MODE	= 0x0D,
+	MIPI_DCS_GET_SIGNAL_MODE	= 0x0E,
+	MIPI_DCS_GET_DIAGNOSTIC_RESULT	= 0x0F,
+	MIPI_DCS_ENTER_SLEEP_MODE	= 0x10,
+	MIPI_DCS_EXIT_SLEEP_MODE	= 0x11,
+	MIPI_DCS_ENTER_PARTIAL_MODE	= 0x12,
+	MIPI_DCS_ENTER_NORMAL_MODE	= 0x13,
+	MIPI_DCS_EXIT_INVERT_MODE	= 0x20,
+	MIPI_DCS_ENTER_INVERT_MODE	= 0x21,
+	MIPI_DCS_SET_GAMMA_CURVE	= 0x26,
+	MIPI_DCS_SET_DISPLAY_OFF	= 0x28,
+	MIPI_DCS_SET_DISPLAY_ON		= 0x29,
+	MIPI_DCS_SET_COLUMN_ADDRESS	= 0x2A,
+	MIPI_DCS_SET_PAGE_ADDRESS	= 0x2B,
+	MIPI_DCS_WRITE_MEMORY_START	= 0x2C,
+	MIPI_DCS_WRITE_LUT		= 0x2D,
+	MIPI_DCS_READ_MEMORY_START	= 0x2E,
+	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
+	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
+	MIPI_DCS_SET_TEAR_OFF		= 0x34,
+	MIPI_DCS_SET_TEAR_ON		= 0x35,
+	MIPI_DCS_SET_ADDRESS_MODE	= 0x36,
+	MIPI_DCS_SET_SCROLL_START	= 0x37,
+	MIPI_DCS_EXIT_IDLE_MODE		= 0x38,
+	MIPI_DCS_ENTER_IDLE_MODE	= 0x39,
+	MIPI_DCS_SET_PIXEL_FORMAT	= 0x3A,
+	MIPI_DCS_WRITE_MEMORY_CONTINUE	= 0x3C,
+	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
+	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
+	MIPI_DCS_GET_SCANLINE		= 0x45,
+	MIPI_DCS_READ_DDB_START		= 0xA1,
+	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+};
+
+/* MIPI DCS pixel formats */
+#define MIPI_DCS_PIXEL_FMT_24BIT	7
+#define MIPI_DCS_PIXEL_FMT_18BIT	6
+#define MIPI_DCS_PIXEL_FMT_16BIT	5
+#define MIPI_DCS_PIXEL_FMT_12BIT	3
+#define MIPI_DCS_PIXEL_FMT_8BIT		2
+#define MIPI_DCS_PIXEL_FMT_3BIT		1
+
+/* request ACK from peripheral */
+#define MIPI_DSI_MSG_REQ_ACK    BIT(0)
+/* use Low Power Mode to transmit message */
+#define MIPI_DSI_MSG_USE_LPM    BIT(1)
+
+/**
+ * struct mipi_dsi_msg - read/write DSI buffer
+ * @channel: virtual channel id
+ * @type: payload data type
+ * @flags: flags controlling this message transmission
+ * @tx_len: length of @tx_buf
+ * @tx_buf: data to be written
+ * @rx_len: length of @rx_buf
+ * @rx_buf: data to be read, or NULL
+ */
+struct mipi_dsi_msg {
+	u8 channel;	/* virtual channel id */
+	u8 type;	/* payload data type */
+	u16 flags;	/* flags controlling this message transmission */
+	size_t tx_len;
+	const void *tx_buf;
+	size_t rx_len;
+	void *rx_buf;
+};
+
+/* DSI mode flags */
+
+/* video mode */
+#define MIPI_DSI_MODE_VIDEO             BIT(0)
+/* video burst mode */
+#define MIPI_DSI_MODE_VIDEO_BURST       BIT(1)
+/* video pulse mode */
+#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE  BIT(2)
+/* enable auto vertical count mode */
+#define MIPI_DSI_MODE_VIDEO_AUTO_VERT   BIT(3)
+/* enable hsync-end packets in vsync-pulse and v-porch area */
+#define MIPI_DSI_MODE_VIDEO_HSE         BIT(4)
+/* disable hfront-porch area */
+#define MIPI_DSI_MODE_VIDEO_HFP         BIT(5)
+/* disable hback-porch area */
+#define MIPI_DSI_MODE_VIDEO_HBP         BIT(6)
+/* disable hsync-active area */
+#define MIPI_DSI_MODE_VIDEO_HSA         BIT(7)
+/* flush display FIFO on vsync pulse */
+#define MIPI_DSI_MODE_VSYNC_FLUSH       BIT(8)
+/* disable EoT packets in HS mode */
+#define MIPI_DSI_MODE_EOT_PACKET        BIT(9)
+/* device supports non-continuous clock behavior (DSI spec 5.6.1) */
+#define MIPI_DSI_CLOCK_NON_CONTINUOUS   BIT(10)
+/* transmit data in low power */
+#define MIPI_DSI_MODE_LPM               BIT(11) /* DSI mode flags */
+
+enum mipi_dsi_pixel_format {
+	MIPI_DSI_FMT_RGB888,
+	MIPI_DSI_FMT_RGB666,
+	MIPI_DSI_FMT_RGB666_PACKED,
+	MIPI_DSI_FMT_RGB565,
+};
+
+/**
+ * struct mipi_dsi_device - DSI peripheral device
+ * @host: DSI host for this peripheral
+ * @dev: driver model device node for this peripheral
+ * @channel: virtual channel assigned to the peripheral
+ * @format: pixel format for video mode
+ * @lanes: number of active data lanes
+ * @mode_flags: DSI operation mode related flags
+ */
+struct mipi_dsi_device {
+	unsigned int channel;
+	unsigned int lanes;
+	enum mipi_dsi_pixel_format format;
+	unsigned long mode_flags;
+	struct mipi_panel_ops *ops;
+	ssize_t (*write_buffer)(struct mipi_dsi_device *dsi,
+				const void *data, size_t len);
+};
+
+struct mipi_panel_ops {
+	int (*init)(struct mipi_dsi_device *dsi, int width, int height);
+	int (*prepare)(struct mipi_dsi_device *dsi);
+	int (*unprepare)(struct mipi_dsi_device *dsi);
+	int (*enable)(struct mipi_dsi_device *dsi);
+	int (*disable)(struct mipi_dsi_device *dsi);
+	void *private_data;
+};
+
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/nexell.h b/arch/arm/mach-nexell/include/mach/nexell.h
new file mode 100644
index 0000000..e42805f
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/nexell.h
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Hyunseok, Jung <hsjung at nexell.co.kr>
+ */
+
+#ifndef __NEXELL_H__
+#define __NEXELL_H__
+
+#define PHY_BASEADDR_DMA0		(0xC0000000)
+#define PHY_BASEADDR_DMA1		(0xC0001000)
+#if defined(CONFIG_ARCH_S5P4418)
+#define PHY_BASEADDR_INTC0		(0xC0002000)
+#define PHY_BASEADDR_INTC1		(0xC0003000)
+#elif defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_INTC		(0xC0008000)
+#endif
+#define PHY_BASEADDR_CLKPWR		(0xC0010000)
+#define PHY_BASEADDR_RTC		(0xC0010C00)
+#define PHY_BASEADDR_ALIVE		(0xC0010800)
+#define PHY_BASEADDR_RSTCON		(0xC0012000)
+#define PHY_BASEADDR_TIEOFF		(0xC0011000)
+#define PHY_BASEADDR_PDM		(0xC0014000)
+#define PHY_BASEADDR_CRYPTO		(0xC0015000)
+#define PHY_BASEADDR_TIMER		(0xC0017000)
+#define PHY_BASEADDR_PWM		(0xC0018000)
+#define PHY_BASEADDR_WDT		(0xC0019000)
+#define PHY_BASEADDR_GPIOA		(0xC001A000)
+#define PHY_BASEADDR_GPIOB		(0xC001B000)
+#define PHY_BASEADDR_GPIOC		(0xC001C000)
+#define PHY_BASEADDR_GPIOD		(0xC001D000)
+#define PHY_BASEADDR_GPIOE		(0xC001E000)
+#define PHY_BASEADDR_OHCI		(0xC0020000)
+#define PHY_BASEADDR_EHCI		(0xC0030000)
+#define PHY_BASEADDR_HSOTG		(0xC0040000)
+#define PHY_BASEADDR_ADC		(0xC0053000)
+#define PHY_BASEADDR_PPM		(0xC0054000)
+#define PHY_BASEADDR_I2S0		(0xC0055000)
+#define PHY_BASEADDR_I2S1		(0xC0056000)
+#define PHY_BASEADDR_I2S2		(0xC0057000)
+#define PHY_BASEADDR_AC97		(0xC0058000)
+#define PHY_BASEADDR_SPDIF_TX		(0xC0059000)
+#define PHY_BASEADDR_SPDIF_RX		(0xC005A000)
+#define PHY_BASEADDR_SSP0		(0xC005B000)
+#define PHY_BASEADDR_SSP1		(0xC005C000)
+#define PHY_BASEADDR_SSP2		(0xC005F000)
+#define PHY_BASEADDR_MPEGTSI		(0xC005D000)
+#define PHY_BASEADDR_GMAC		(0xC0060000)
+#define PHY_BASEADDR_VIP0		(0xC0063000)
+#define PHY_BASEADDR_VIP1		(0xC0064000)
+#if defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_VIP2		(0xC0099000)
+#endif
+#define PHY_BASEADDR_DEINTERLACE	(0xC0065000)
+#define PHY_BASEADDR_SCALER		(0xC0066000)
+#define PHY_BASEADDR_ECID		(0xC0067000)
+#define PHY_BASEADDR_SDMMC0		(0xC0062000)
+#define PHY_BASEADDR_SDMMC1		(0xC0068000)
+#define PHY_BASEADDR_SDMMC2		(0xC0069000)
+#define PHY_BASEADDR_MALI400		(0xC0070000)
+#define PHY_BASEADDR_CODA_APB0		(0xC0080000)
+#define PHY_BASEADDR_CODA_APB1		(0xC0081000)
+#define PHY_BASEADDR_CODA_APB2		(0xC0082000)
+#define PHY_BASEADDR_CODA_APB3		(0xC0083000)
+/* dma (O), modem(X), UART0_MODULE */
+#define PHY_BASEADDR_UART0		(0xC00A1000)
+/* dma (O), modem(O), pl01115_Uart_modem_MODULE */
+#define PHY_BASEADDR_UART1		(0xC00A0000)
+/* dma (O), modem(X), UART1_MODULE */
+#define PHY_BASEADDR_UART2		(0xC00A2000)
+/* dma (X), modem(X), pl01115_Uart_nodma0_MODULE */
+#define PHY_BASEADDR_UART3		(0xC00A3000)
+/* dma (X), modem(X), pl01115_Uart_nodma1_MODULE */
+#define PHY_BASEADDR_UART4		(0xC006D000)
+/* dma (X), modem(X), pl01115_Uart_nodma2_MODULE */
+#define PHY_BASEADDR_UART5		(0xC006F000)
+#define PHY_BASEADDR_I2C0		(0xC00A4000)
+#define PHY_BASEADDR_I2C1		(0xC00A5000)
+#define PHY_BASEADDR_I2C2		(0xC00A6000)
+#define PHY_BASEADDR_CAN0		(0xC00CE000)
+#define PHY_BASEADDR_CAN1		(0xC00CF000)
+#define PHY_BASEADDR_MIPI		(0xC00D0000)
+#define PHY_BASEADDR_DISPLAYTOP		(0xC0100000)
+
+#define PHY_BASEADDR_CLKGEN0		(0xC00BB000)	/* TIMER_1 */
+#define PHY_BASEADDR_CLKGEN1		(0xC00BC000)	/* TIMER_2 */
+#define PHY_BASEADDR_CLKGEN2		(0xC00BD000)	/* TIMER_3 */
+#define PHY_BASEADDR_CLKGEN3		(0xC00BE000)	/* PWM_1 */
+#define PHY_BASEADDR_CLKGEN4		(0xC00BF000)	/* PWM_2 */
+#define PHY_BASEADDR_CLKGEN5		(0xC00C0000)	/* PWM_3 */
+#define PHY_BASEADDR_CLKGEN6		(0xC00AE000)	/* I2C_0 */
+#define PHY_BASEADDR_CLKGEN7		(0xC00AF000)	/* I2C_1 */
+#define PHY_BASEADDR_CLKGEN8		(0xC00B0000)	/* I2C_2 */
+#define PHY_BASEADDR_CLKGEN9		(0xC00CA000)	/* MIPI */
+#define PHY_BASEADDR_CLKGEN10		(0xC00C8000)	/* GMAC */
+#define PHY_BASEADDR_CLKGEN11		(0xC00B8000)	/* SPDIF_TX */
+#define PHY_BASEADDR_CLKGEN12		(0xC00B7000)	/* MPEGTSI */
+#define PHY_BASEADDR_CLKGEN13		(0xC00BA000)	/* PWM_0 */
+#define PHY_BASEADDR_CLKGEN14		(0xC00B9000)	/* TIMER_0 */
+#define PHY_BASEADDR_CLKGEN15		(0xC00B2000)	/* I2S_0 */
+#define PHY_BASEADDR_CLKGEN16		(0xC00B3000)	/* I2S_1 */
+#define PHY_BASEADDR_CLKGEN17		(0xC00B4000)	/* I2S_2 */
+#define PHY_BASEADDR_CLKGEN18		(0xC00C5000)	/* SDHC_0 */
+#define PHY_BASEADDR_CLKGEN19		(0xC00CC000)	/* SDHC_1 */
+#define PHY_BASEADDR_CLKGEN20		(0xC00CD000)	/* SDHC_2 */
+#define PHY_BASEADDR_CLKGEN21		(0xC00C3000)	/* MALI */
+#define PHY_BASEADDR_CLKGEN22		(0xC00A9000)	/* UART_0 */
+#define PHY_BASEADDR_CLKGEN23		(0xC00AA000)	/* UART_2 */
+#define PHY_BASEADDR_CLKGEN24		(0xC00A8000)	/* UART_1 */
+#define PHY_BASEADDR_CLKGEN25		(0xC00AB000)	/* UART_3 */
+#define PHY_BASEADDR_CLKGEN26		(0xC006E000)	/* UART_4 */
+#define PHY_BASEADDR_CLKGEN27		(0xC00B1000)	/* UART_5 */
+#define PHY_BASEADDR_CLKGEN28		(0xC00B5000)	/* DEINTERLACE */
+#define PHY_BASEADDR_CLKGEN29		(0xC00C4000)	/* PPM */
+#define PHY_BASEADDR_CLKGEN30		(0xC00C1000)	/* VIP_0 */
+#define PHY_BASEADDR_CLKGEN31		(0xC00C2000)	/* VIP_1 */
+#define PHY_BASEADDR_CLKGEN32		(0xC006B000)	/* USB2HOST */
+#define PHY_BASEADDR_CLKGEN33		(0xC00C7000)	/* CODA */
+#define PHY_BASEADDR_CLKGEN34		(0xC00C6000)	/* CRYPTO */
+#define PHY_BASEADDR_CLKGEN35		(0xC00B6000)	/* SCALER */
+#define PHY_BASEADDR_CLKGEN36		(0xC00CB000)	/* PDM */
+#define PHY_BASEADDR_CLKGEN37		(0xC00AC000)	/* SPI0 */
+#define PHY_BASEADDR_CLKGEN38		(0xC00AD000)	/* SPI1 */
+#define PHY_BASEADDR_CLKGEN39		(0xC00A7000)	/* SPI2 */
+#if defined(CONFIG_ARCH_S5P6818)
+#define PHY_BASEADDR_CLKGEN40		(0xC009A000)
+#endif
+#define PHY_BASEADDR_DREX		(0xC00E0000)
+
+#define PHY_BASEADDR_CS_NAND		(0x2C000000)
+
+#define PHY_BASEADDR_SRAM		(0xFFFF0000)
+
+/*
+ * Nexell clock generator
+ */
+#define CLK_ID_TIMER_1			0
+#define CLK_ID_TIMER_2			1
+#define CLK_ID_TIMER_3			2
+#define CLK_ID_PWM_1			3
+#define CLK_ID_PWM_2			4
+#define CLK_ID_PWM_3			5
+#define CLK_ID_I2C_0			6
+#define CLK_ID_I2C_1			7
+#define CLK_ID_I2C_2			8
+#define CLK_ID_MIPI			9
+#define CLK_ID_GMAC			10	/* External Clock 1 */
+#define CLK_ID_SPDIF_TX			11
+#define CLK_ID_MPEGTSI			12
+#define CLK_ID_PWM_0			13
+#define CLK_ID_TIMER_0			14
+#define CLK_ID_I2S_0			15	/* External Clock 1 */
+#define CLK_ID_I2S_1			16	/* External Clock 1 */
+#define CLK_ID_I2S_2			17	/* External Clock 1 */
+#define CLK_ID_SDHC_0			18
+#define CLK_ID_SDHC_1			19
+#define CLK_ID_SDHC_2			20
+#define CLK_ID_MALI			21
+#define CLK_ID_UART_0			22	/* UART0_MODULE */
+#define CLK_ID_UART_2			23	/* UART1_MODULE */
+#define CLK_ID_UART_1			24	/* pl01115_Uart_modem_MODULE  */
+#define CLK_ID_UART_3			25	/* pl01115_Uart_nodma0_MODULE */
+#define CLK_ID_UART_4			26	/* pl01115_Uart_nodma1_MODULE */
+#define CLK_ID_UART_5			27	/* pl01115_Uart_nodma2_MODULE */
+#define CLK_ID_DIT			28
+#define CLK_ID_PPM			29
+#define CLK_ID_VIP_0			30	/* External Clock 1 */
+#define CLK_ID_VIP_1			31	/* External Clock 1, 2 */
+#define CLK_ID_USB2HOST			32	/* External Clock 2 */
+#define CLK_ID_CODA			33
+#define CLK_ID_CRYPTO			34
+#define CLK_ID_SCALER			35
+#define CLK_ID_PDM			36
+#define CLK_ID_SPI_0			37
+#define CLK_ID_SPI_1			38
+#define CLK_ID_SPI_2			39
+#define CLK_ID_MAX			39
+
+/*
+ * Nexell Reset control
+ */
+#define RESET_ID_AC97			0
+#define RESET_ID_CPU1			1
+#define RESET_ID_CPU2			2
+#define RESET_ID_CPU3			3
+#define RESET_ID_WD1			4
+#define RESET_ID_WD2			5
+#define RESET_ID_WD3			6
+#define RESET_ID_CRYPTO			7
+#define RESET_ID_DEINTERLACE		8
+#define RESET_ID_DISP_TOP		9
+#define RESET_ID_DISPLAY		10
+#define RESET_ID_RESCONV		11
+#define RESET_ID_LCDIF			12
+#define RESET_ID_HDMI			13
+#define RESET_ID_HDMI_VIDEO		14
+#define RESET_ID_HDMI_SPDIF		15
+#define RESET_ID_HDMI_TMDS		16
+#define RESET_ID_HDMI_PHY		17
+#define RESET_ID_LVDS			18
+#define RESET_ID_ECID			19
+#define RESET_ID_I2C0			20
+#define RESET_ID_I2C1			21
+#define RESET_ID_I2C2			22
+#define RESET_ID_I2S0			23
+#define RESET_ID_I2S1			24
+#define RESET_ID_I2S2			25
+#define RESET_ID_DREX_C			26
+#define RESET_ID_DREX_A			27
+#define RESET_ID_DREX			28
+#define RESET_ID_MIPI			29
+#define RESET_ID_MIPI_DSI		30
+#define RESET_ID_MIPI_CSI		31
+#define RESET_ID_MIPI_PHY_S		32
+#define RESET_ID_MIPI_PHY_M		33
+#define RESET_ID_MPEGTSI		34
+#define RESET_ID_PDM			35
+#define RESET_ID_TIMER			36
+#define RESET_ID_PWM			37
+#define RESET_ID_SCALER			38
+#define RESET_ID_SDMMC0			39
+#define RESET_ID_SDMMC1			40
+#define RESET_ID_SDMMC2			41
+#define RESET_ID_SPDIFRX		42
+#define RESET_ID_SPDIFTX		43
+#define RESET_ID_SSP0_P			44
+#define RESET_ID_SSP0			45
+#define RESET_ID_SSP1_P			46
+#define RESET_ID_SSP1			47
+#define RESET_ID_SSP2_P			48
+#define RESET_ID_SSP2			49
+#define RESET_ID_UART0			50	/* UART1 */
+#define RESET_ID_UART1			51	/* pl01115_Uart_modem	*/
+#define RESET_ID_UART2			52	/* UART1 */
+#define RESET_ID_UART3			53	/* pl01115_Uart_nodma0 */
+#define RESET_ID_UART4			54	/* pl01115_Uart_nodma1 */
+#define RESET_ID_UART5			55	/* pl01115_Uart_nodma2 */
+#define RESET_ID_USB20HOST		56
+#define RESET_ID_USB20OTG		57
+#define RESET_ID_WDT			58
+#define RESET_ID_WDT_POR		59
+#define RESET_ID_ADC			60
+#define RESET_ID_CODA_A			61
+#define RESET_ID_CODA_P			62
+#define RESET_ID_CODA_C			63
+#define RESET_ID_DWC_GMAC		64
+#define RESET_ID_MALI400		65
+#define RESET_ID_PPM			66
+#define RESET_ID_VIP1			67
+#define RESET_ID_VIP0			68
+#if defined(CONFIG_ARCH_S5P6818)
+#define RESET_ID_VIP2			69
+#endif
+
+/*
+ * device name
+ */
+#define DEV_NAME_UART			"nx-uart" /* pl0115 (amba-pl011.c) */
+#define DEV_NAME_FB			"nx-fb"
+#define DEV_NAME_DISP			"nx-disp"
+#define DEV_NAME_LCD			"nx-lcd"
+#define DEV_NAME_LVDS			"nx-lvds"
+#define DEV_NAME_HDMI			"nx-hdmi"
+#define DEV_NAME_RESCONV		"nx-resconv"
+#define DEV_NAME_MIPI			"nx-mipi"
+#define DEV_NAME_PCM			"nx-pcm"
+#define DEV_NAME_I2S			"nx-i2s"
+#define DEV_NAME_SPDIF_TX		"nx-spdif-tx"
+#define DEV_NAME_SPDIF_RX		"nx-spdif-rx"
+#define DEV_NAME_I2C			"nx-i2c"
+#define DEV_NAME_NAND			"nx-nand"
+#define DEV_NAME_KEYPAD			"nx-keypad"
+#define DEV_NAME_SDHC			"nx-sdhc"
+#define DEV_NAME_PWM			"nx-pwm"
+#define DEV_NAME_TIMER			"nx-timer"
+#define DEV_NAME_SOC_PWM		"nx-soc-pwm"
+#define DEV_NAME_GPIO			"nx-gpio"
+#define DEV_NAME_RTC			"nx-rtc"
+#define DEV_NAME_GMAC			"nx-gmac"
+#define DEV_NAME_MPEGTSI		"nx-mpegtsi"
+#define DEV_NAME_MALI			"nx-mali"
+#define DEV_NAME_DIT			"nx-deinterlace"
+#define DEV_NAME_PPM			"nx-ppm"
+#define DEV_NAME_VIP			"nx-vip"
+#define DEV_NAME_CODA			"nx-coda"
+#define DEV_NAME_USB2HOST		"nx-usb2h"
+#define DEV_NAME_CRYPTO			"nx-crypto"
+#define DEV_NAME_SCALER			"nx-scaler"
+#define DEV_NAME_PDM			"nx-pdm"
+#define DEV_NAME_SPI			"nx-spi"
+#define DEV_NAME_CPUFREQ		"nx-cpufreq"
+
+/*
+ * clock generator
+ */
+#define CORECLK_NAME_PLL0		"pll0"	/* cpu clock */
+#define CORECLK_NAME_PLL1		"pll1"
+#define CORECLK_NAME_PLL2		"pll2"
+#define CORECLK_NAME_PLL3		"pll3"
+#define CORECLK_NAME_FCLK		"fclk"
+#define CORECLK_NAME_MCLK		"mclk"
+#define CORECLK_NAME_BCLK		"bclk"
+#define CORECLK_NAME_PCLK		"pclk"
+#define CORECLK_NAME_HCLK		"hclk"
+
+#define CORECLK_ID_PLL0			0
+#define CORECLK_ID_PLL1			1
+#define CORECLK_ID_PLL2			2
+#define CORECLK_ID_PLL3			3
+#define CORECLK_ID_FCLK			4
+#define CORECLK_ID_MCLK			5
+#define CORECLK_ID_BCLK			6
+#define CORECLK_ID_PCLK			7
+#define CORECLK_ID_HCLK			8
+
+#define ALIVEPWRGATEREG			(PHY_BASEADDR_ALIVE + 0x0)
+
+#if defined(CONFIG_ARCH_S5P4418)
+#define	SCR_ARM_SECOND_BOOT		(0xC0010C1C)	 /* PWR scratch */
+#define	SCR_ARM_SECOND_BOOT_REG1	(0xc0010234) /* ToDo : Check Address */
+#elif defined(CONFIG_ARCH_S5P6818)
+#define	SCR_ARM_SECOND_BOOT		(0xc0010230)	 /* PWR scratch */
+#define	SCR_ARM_SECOND_BOOT_REG1	(0xc0010234) /* PWR scratch */
+#define	SCR_ARM_SECOND_BOOT_REG2	(0xc0010238) /* PWR scratch */
+#endif
+
+#define	SCR_ALIVE_BASE			(PHY_BASEADDR_ALIVE)
+#define	SCR_SIGNAGURE_RESET		(SCR_ALIVE_BASE + 0x068)
+#define	SCR_SIGNAGURE_SET		(SCR_ALIVE_BASE + 0x06C)
+#define	SCR_SIGNAGURE_READ		(SCR_ALIVE_BASE + 0x070)
+
+#define SYSRSTCONFIG			(0x23C)
+#define DEVICEBOOTINFO			(0x50)
+#define BOOTMODE_MASK			(0x7)
+#define BOOTMODE_SDMMC			5
+#define BOOTMODE_USB			6
+#define BOOTMODE_SDMMC_PORT_VAL(x)	((((x) >> 3) & 1) |	\
+					 (((x) >> 19 & 1) << 1))
+#define EMMC_PORT_NUM			2
+#define SD_PORT_NUM			0
+#define ID_REG_EC0				(0x54)
+#define WIRE0_MASK				(0x1)
+
+#ifndef __ASSEMBLY__
+
+#define NS_IN_HZ (1000000000UL)
+#define TO_PERIOD_NS(freq)	(NS_IN_HZ / (freq))
+#define TO_DUTY_NS(duty, freq)  (duty ? TO_PERIOD_NS(freq) / (100 / duty) : 0)
+
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __NEXELL_H__ */
diff --git a/arch/arm/mach-nexell/include/mach/nx_gpio.h b/arch/arm/mach-nexell/include/mach/nx_gpio.h
new file mode 100644
index 0000000..91803d2
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/nx_gpio.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybpark at nexell.co.kr>
+ */
+
+#include <linux/types.h>
+#include <asm/io.h>
+
+#ifndef __nx_gpio_h__
+#define __nx_gpio_h__
+
+struct nx_gpio_register_set {
+	u32 gpioxout;
+	u32 gpioxoutenb;
+	u32 gpioxdetmode[2];
+	u32 gpioxintenb;
+	u32 gpioxdet;
+	u32 gpioxpad;
+	u32 gpioxpuenb;
+	u32 gpioxaltfn[2];
+	u32 gpioxdetmodeex;
+	u32 __reserved[4];
+	u32 gpioxdetenb;
+	u32 gpiox_slew;
+	u32 gpiox_slew_disable_default;
+	u32 gpiox_drv1;
+	u32 gpiox_drv1_disable_default;
+	u32 gpiox_drv0;
+	u32 gpiox_drv0_disable_default;
+	u32 gpiox_pullsel;
+	u32 gpiox_pullsel_disable_default;
+	u32 gpiox_pullenb;
+	u32 gpiox_pullenb_disable_default;
+	u32 gpiox_input_mux_select0;
+	u32 gpiox_input_mux_select1;
+	u8 __reserved1[0x1000 - 0x70];
+};
+
+enum {
+	nx_gpio_padfunc_0 = 0ul,
+	nx_gpio_padfunc_1 = 1ul,
+	nx_gpio_padfunc_2 = 2ul,
+	nx_gpio_padfunc_3 = 3ul
+};
+
+enum {
+	nx_gpio_drvstrength_0 = 0ul,
+	nx_gpio_drvstrength_1 = 1ul,
+	nx_gpio_drvstrength_2 = 2ul,
+	nx_gpio_drvstrength_3 = 3ul
+};
+
+enum {
+	nx_gpio_pull_down = 0ul,
+	nx_gpio_pull_up = 1ul,
+	nx_gpio_pull_off = 2ul
+};
+
+int nx_gpio_initialize(void);
+u32 nx_gpio_get_number_of_module(void);
+u32 nx_gpio_get_size_of_register_set(void);
+void nx_gpio_set_base_address(u32 module_index, void *base_address);
+void *nx_gpio_get_base_address(u32 module_index);
+int nx_gpio_open_module(u32 module_index);
+int nx_gpio_close_module(u32 module_index);
+int nx_gpio_check_busy(u32 module_index);
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+			       int detect_enb);
+void nx_gpio_set_pad_function(u32 module_index, u32 bit_number, u32 padfunc);
+void nx_gpio_set_pad_function32(u32 module_index, u32 msbvalue, u32 lsbvalue);
+int nx_gpio_get_pad_function(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_enable(u32 module_index, u32 bit_number,
+			       int output_enb);
+int nx_gpio_get_detect_enable(u32 module_index, u32 bit_number);
+u32 nx_gpio_get_detect_enable32(u32 module_index);
+void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number,
+			       int detect_enb);
+void nx_gpio_set_detect_enable32(u32 module_index, u32 enable_flag);
+int nx_gpio_get_output_enable(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_enable32(u32 module_index, int output_enb);
+u32 nx_gpio_get_output_enable32(u32 module_index);
+void nx_gpio_set_output_value(u32 module_index, u32 bit_number, int value);
+int nx_gpio_get_output_value(u32 module_index, u32 bit_number);
+void nx_gpio_set_output_value32(u32 module_index, u32 value);
+u32 nx_gpio_get_output_value32(u32 module_index);
+int nx_gpio_get_input_value(u32 module_index, u32 bit_number);
+void nx_gpio_set_pull_select(u32 module_index, u32 bit_number, int enable);
+void nx_gpio_set_pull_select32(u32 module_index, u32 value);
+int nx_gpio_get_pull_select(u32 module_index, u32 bit_number);
+u32 nx_gpio_get_pull_select32(u32 module_index);
+void nx_gpio_set_pull_mode(u32 module_index, u32 bit_number, u32 mode);
+void nx_gpio_set_fast_slew(u32 module_index, u32 bit_number, int enable);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+						u32 bit_number, int enable);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+						u32 bit_number, int enable);
+void nx_gpio_set_drive_strength(u32 module_index, u32 bit_number,
+				u32 drvstrength);
+void nx_gpio_set_drive_strength_disable_default(u32 module_index,
+						u32 bit_number, int enable);
+u32 nx_gpio_get_drive_strength(u32 module_index, u32 bit_number);
+#endif
diff --git a/arch/arm/mach-nexell/include/mach/reset.h b/arch/arm/mach-nexell/include/mach/reset.h
new file mode 100644
index 0000000..e1301d4
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/reset.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <ybpark at nexell.co.kr>
+ */
+
+#ifndef __NEXELL_RESET__
+#define __NEXELL_RESET__
+
+#define NUMBER_OF_RESET_MODULE_PIN      69
+
+enum rstcon {
+	RSTCON_ASSERT	= 0UL,
+	RSTCON_NEGATE	= 1UL
+};
+
+void nx_rstcon_setrst(u32 rstindex, enum rstcon status);
+
+#endif /* __NEXELL_RESET__ */
diff --git a/arch/arm/mach-nexell/include/mach/sec_reg.h b/arch/arm/mach-nexell/include/mach/sec_reg.h
new file mode 100644
index 0000000..e3ae5ac
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/sec_reg.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park at nexell.co.kr>
+ */
+
+#define NEXELL_L2C_SEC_ID	0
+#define NEXELL_MALI_SEC_ID	2
+#define NEXELL_MIPI_SEC_ID	4
+#define NEXELL_TOFF_SEC_ID	6
+
+int write_sec_reg_by_id(void __iomem *reg, int val, int id);
+int read_sec_reg_by_id(void __iomem *reg, int id);
+int read_sec_reg(void __iomem *reg);
+int write_sec_reg(void __iomem *reg, int val);
diff --git a/arch/arm/mach-nexell/include/mach/tieoff.h b/arch/arm/mach-nexell/include/mach/tieoff.h
new file mode 100644
index 0000000..70e9652
--- /dev/null
+++ b/arch/arm/mach-nexell/include/mach/tieoff.h
@@ -0,0 +1,423 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2016 Nexell
+ * Youngbok, Park <park at nexell.co.kr>
+ */
+
+#ifndef _NEXELL_TIEOFF_H
+#define _NEXELL_TIEOFF_H
+
+void nx_tieoff_set(u32 tieoff_index, u32 tieoff_value);
+u32 nx_tieoff_get(u32 tieoff_index);
+
+#if defined(CONFIG_ARCH_S5P4418)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCOREOUT	((1 << 16) | 0)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU0	((1 << 16) | 1)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU1	((1 << 16) | 2)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU2	((1 << 16) | 3)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU3	((1 << 16) | 4)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_COREPWRDOWN	((1 << 16) | 5)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU0PWRDOWN	((1 << 16) | 6)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU1PWRDOWN	((1 << 16) | 7)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU2PWRDOWN	((1 << 16) | 8)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU3PWRDOWN	((1 << 16) | 9)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2_CFGENDIAN	((1 << 16) | 10)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAS		((1 << 16) | 11)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_0	((1 << 16) | 12)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_1	((1 << 16) | 13)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_0	((1 << 16) | 14)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_1	((1 << 16) | 15)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_0	((1 << 16) | 16)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_1	((1 << 16) | 17)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_VINITHI	((4 << 16) | 18)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMA		((3 << 16) | 22)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_TEINIT		((4 << 16) | 25)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAW		((2 << 16) | 29)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMAW		((2 << 16) | 32)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMA		((3 << 16) | 34)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPUCLKOFF	((4 << 16) | 37)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI0	((2 << 16) | 41)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI1	((2 << 16) | 43)
+#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI2	((2 << 16) | 45)
+#elif defined(CONFIG_ARCH_S5P6818)
+#define NX_TIEOFF_MMC_8BIT				((1 << 16) | 5)
+#endif
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAA		((3 << 16) | 47)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAB		((3 << 16) | 50)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWA		((2 << 16) | 53)
+#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWB		((2 << 16) | 55)
+#define NX_TIEOFF_AXISRAM0_i_nPowerDown			((1 << 16) | 57)
+#define NX_TIEOFF_AXISRAM0_i_nSleep			((1 << 16) | 58)
+#define NX_TIEOFF_CAN0_i_TIE_rf1_EMA			((3 << 16) | 59)
+#define NX_TIEOFF_CAN0_i_TIE_rf1_EMAW			((2 << 16) | 62)
+#define NX_TIEOFF_CAN0_i_nPowerDown			((1 << 16) | 64)
+#define NX_TIEOFF_CAN0_i_nSleep				((1 << 16) | 65)
+#define NX_TIEOFF_CAN1_i_TIE_rf1_EMA			((3 << 16) | 66)
+#define NX_TIEOFF_CAN1_i_TIE_rf1_EMAW			((2 << 16) | 69)
+#define NX_TIEOFF_CAN1_i_nPowerDown			((1 << 16) | 71)
+#define NX_TIEOFF_CAN1_i_nSleep				((1 << 16) | 72)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMA		((3 << 16) | 73)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMAW		((2 << 16) | 76)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAA		((3 << 16) | 78)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAB		((3 << 16) | 81)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAA		((3 << 16) | 84)
+#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAB		((3 << 16) | 87)
+#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nPowerDown	((1 << 16) | 90)
+#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nSleep		((1 << 16) | 91)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nPowerDown		((2 << 16) | 92)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nSleep		((2 << 16) | 94)
+#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_PHY_REFCLK_SEL	((1 << 16) | 96)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMA	((3 << 16) | 97)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMAW	((2 << 16) | 100)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAA ((3 << 16) | 102)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAB ((3 << 16) | 105)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAA	((3 << 16) | 108)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAB	((3 << 16) | 111)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWA	((2 << 16) | 114)
+#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWB	((2 << 16) | 116)
+#define NX_TIEOFF_MCUSTOP0_i_vrom_EMA			((3 << 16) | 118)
+#define NX_TIEOFF_DREX0_CKE_INIT			((1 << 16) | 121)
+#define NX_TIEOFF_DREX0_CA_SWAP				((1 << 16) | 122)
+#define NX_TIEOFF_DREX0_CSYSREQ				((1 << 16) | 123)
+#define NX_TIEOFF_DREX0_PAUSE_REQ			((1 << 16) | 124)
+#define NX_TIEOFF_DREX0_PEREV_TRIGGER			((1 << 16) | 125)
+#define NX_TIEOFF_DREX0_CTRL_HCKE			((1 << 16) | 126)
+#define NX_TIEOFF_DREX0_DFI_RESET_N_P0			((1 << 16) | 127)
+#define NX_TIEOFF_DREX0_DFI_RESET_N_P1			((1 << 16) | 128)
+#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAA		((3 << 16) | 129)
+#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAB		((3 << 16) | 132)
+#define NX_TIEOFF_MIPI0_i_NX_NPOWERDOWN			((4 << 16) | 135)
+#define NX_TIEOFF_MIPI0_i_NX_NSLEEP			((4 << 16) | 139)
+#define NX_TIEOFF_SCALER0_i_NX_EMA			((3 << 16) | 143)
+#define NX_TIEOFF_SCALER0_i_NX_EMAW			((2 << 16) | 146)
+#define NX_TIEOFF_UART0_USESMC				((1 << 16) | 148)
+#define NX_TIEOFF_UART0_SMCTXENB			((1 << 16) | 149)
+#define NX_TIEOFF_UART0_SMCRXENB			((1 << 16) | 150)
+#define NX_TIEOFF_UART1_USESMC				((1 << 16) | 151)
+#define NX_TIEOFF_UART1_SMCTXENB			((1 << 16) | 152)
+#define NX_TIEOFF_UART1_SMCRXENB			((1 << 16) | 153)
+#define NX_TIEOFF_UART2_USESMC				((1 << 16) | 154)
+#define NX_TIEOFF_UART2_SMCTXENB			((1 << 16) | 155)
+#define NX_TIEOFF_UART2_SMCRXENB			((1 << 16) | 156)
+#define NX_TIEOFF_UART3_USESMC				((1 << 16) | 157)
+#define NX_TIEOFF_UART3_SMCTXENB			((1 << 16) | 158)
+#define NX_TIEOFF_UART3_SMCRXENB			((1 << 16) | 159)
+#define NX_TIEOFF_UART4_USESMC				((1 << 16) | 160)
+#define NX_TIEOFF_UART4_SMCTXENB			((1 << 16) | 161)
+#define NX_TIEOFF_UART4_SMCRXENB			((1 << 16) | 162)
+#define NX_TIEOFF_UART5_USESMC				((1 << 16) | 163)
+#define NX_TIEOFF_UART5_SMCTXENB			((1 << 16) | 164)
+#define NX_TIEOFF_UART5_SMCRXENB			((1 << 16) | 165)
+#define NX_TIEOFF_USB20HOST0_i_nPowerDown		((1 << 16) | 166)
+#define NX_TIEOFF_USB20HOST0_i_nSleep			((1 << 16) | 167)
+#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMA		((3 << 16) | 168)
+#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMAW		((2 << 16) | 171)
+#define NX_TIEOFF_USB20HOST0_sys_interrupt_i		((1 << 16) | 173)
+#define NX_TIEOFF_USB20HOST0_i_hsic_en			((3 << 16) | 174)
+#define NX_TIEOFF_USB20HOST0_i_nResetSync		((1 << 16) | 177)
+#define NX_TIEOFF_USB20HOST0_i_nResetSync_ohci		((1 << 16) | 178)
+#define NX_TIEOFF_USB20HOST0_i_nAuxWellResetSync	((1 << 16) | 179)
+#define NX_TIEOFF_USB20HOST0_i_nHostPhyResetSync	((1 << 16) | 180)
+#define NX_TIEOFF_USB20HOST0_i_nHostUtmiResetSync	((1 << 16) | 181)
+#define NX_TIEOFF_USB20HOST0_i_nHostHsicResetSync	((1 << 16) | 182)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_FREE_CLOCK_ENB	((1 << 16) | 183)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_480M_FROM_OTG_PHY	((1 << 16) | 184)
+#define NX_TIEOFF_USB20HOST0_ss_word_if_enb_i		((1 << 16) | 185)
+#define NX_TIEOFF_USB20HOST0_ss_word_if_i		((1 << 16) | 186)
+#define NX_TIEOFF_USB20HOST0_ss_utmi_backward_enb_i	((1 << 16) | 187)
+#define NX_TIEOFF_USB20HOST0_ss_resume_utmi_pls_dis_i	((1 << 16) | 188)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_0_i		((3 << 16) | 189)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_1_i		((3 << 16) | 192)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_2_i		((3 << 16) | 195)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_3_i		((3 << 16) | 198)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_4_i		((3 << 16) | 201)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_5_i		((3 << 16) | 204)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_6_i		((3 << 16) | 207)
+#define NX_TIEOFF_USB20HOST0_phy_vstatus_7_i		((3 << 16) | 210)
+#define NX_TIEOFF_USB20HOST0_ss_power_state_valid_i	((1 << 16) | 213)
+#define NX_TIEOFF_USB20HOST0_ss_nxt_power_state_valid_i ((1 << 16) | 214)
+#define NX_TIEOFF_USB20HOST0_ss_power_state_i		((2 << 16) | 215)
+#define NX_TIEOFF_USB20HOST0_ss_next_power_state_i	((2 << 16) | 217)
+#define NX_TIEOFF_USB20HOST0_app_prt_ovrcur_i		((3 << 16) | 219)
+#define NX_TIEOFF_USB20HOST0_ss_simulation_mode_i	((1 << 16) | 222)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_host_i	((6 << 16) | 224)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_5_i		((3 << 16) | 230)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_4_i		((3 << 16) | 233)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_3_i		((3 << 16) | 236)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_2_i		((3 << 16) | 239)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_1_i		((3 << 16) | 242)
+#define NX_TIEOFF_USB20HOST0_ss_fladj_val_0_i		((3 << 16) | 245)
+#define NX_TIEOFF_USB20HOST0_ss_autoppd_on_overcur_en_i ((1 << 16) | 248)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr16_i		((1 << 16) | 249)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr8_i		((1 << 16) | 250)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incr4_i		((1 << 16) | 251)
+#define NX_TIEOFF_USB20HOST0_ss_ena_incrx_align_i	((1 << 16) | 252)
+#define NX_TIEOFF_USB20HOST0_i_ohci_0_cntsel_n		((1 << 16) | 253)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq1_i		((1 << 16) | 254)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq12_i		((1 << 16) | 255)
+#define NX_TIEOFF_USB20HOST0_ohci_0_app_io_hit_i	((1 << 16) | 256)
+#define NX_TIEOFF_USB20HOST0_ss_hubsetup_min_i		((1 << 16) | 257)
+#define NX_TIEOFF_USB20HOST0_app_start_clk_i		((1 << 16) | 258)
+#define NX_TIEOFF_USB20HOST0_ohci_susp_lgcy_i		((1 << 16) | 259)
+#define NX_TIEOFF_USB20HOST0_i_SIDDQ			((1 << 16) | 260)
+#define NX_TIEOFF_USB20HOST0_i_VATESTENB		((2 << 16) | 261)
+#define NX_TIEOFF_USB20HOST0_i_POR_ENB			((1 << 16) | 263)
+#define NX_TIEOFF_USB20HOST0_i_POR			((1 << 16) | 264)
+#define NX_TIEOFF_USB20HOST0_i_REFCLKSEL		((2 << 16) | 265)
+#define NX_TIEOFF_USB20HOST0_i_FSEL			((3 << 16) | 267)
+#define NX_TIEOFF_USB20HOST0_i_COMMONONN		((1 << 16) | 270)
+#define NX_TIEOFF_USB20HOST0_i_RESREQIN			((1 << 16) | 271)
+#define NX_TIEOFF_USB20HOST0_i_PORTRESET		((1 << 16) | 272)
+#define NX_TIEOFF_USB20HOST0_i_OTGDISABLE		((1 << 16) | 273)
+#define NX_TIEOFF_USB20HOST0_i_LOOPBACKENB		((1 << 16) | 274)
+#define NX_TIEOFF_USB20HOST0_i_IDPULLUPi		((1 << 16) | 275)
+#define NX_TIEOFF_USB20HOST0_i_DRVVBUS			((1 << 16) | 276)
+#define NX_TIEOFF_USB20HOST0_i_ADPCHRG			((1 << 16) | 277)
+#define NX_TIEOFF_USB20HOST0_i_ADPDISCHRG		((1 << 16) | 278)
+#define NX_TIEOFF_USB20HOST0_i_ADPPRBENB		((1 << 16) | 279)
+#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXT		((1 << 16) | 280)
+#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXTSEL		((1 << 16) | 281)
+#define NX_TIEOFF_USB20HOST0_i_DPPULLDOWN		((1 << 16) | 282)
+#define NX_TIEOFF_USB20HOST0_i_DMPULLDOWN		((1 << 16) | 283)
+#define NX_TIEOFF_USB20HOST0_i_SUSPENDM_ENB		((1 << 16) | 284)
+#define NX_TIEOFF_USB20HOST0_i_SUSPENDM			((1 << 16) | 285)
+#define NX_TIEOFF_USB20HOST0_i_SLEEPM_ENB		((1 << 16) | 286)
+#define NX_TIEOFF_USB20HOST0_i_SLEEPM			((1 << 16) | 287)
+#define NX_TIEOFF_USB20HOST0_i_OPMODE_ENB		((1 << 16) | 288)
+#define NX_TIEOFF_USB20HOST0_i_OPMODE			((2 << 16) | 289)
+#define NX_TIEOFF_USB20HOST0_i_TERMSEL_ENB		((1 << 16) | 291)
+#define NX_TIEOFF_USB20HOST0_i_TERMSEL			((1 << 16) | 292)
+#define NX_TIEOFF_USB20HOST0_i_XCVRSEL_ENB		((1 << 16) | 293)
+#define NX_TIEOFF_USB20HOST0_i_XCVRSEL			((2 << 16) | 294)
+#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE_ENB	((1 << 16) | 296)
+#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE		((1 << 16) | 297)
+#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFEN		((1 << 16) | 298)
+#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFENH		((1 << 16) | 299)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDPDATA		((1 << 16) | 300)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDMDATA		((1 << 16) | 301)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDPEN		((1 << 16) | 302)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSDMEN		((1 << 16) | 303)
+#define NX_TIEOFF_USB20HOST0_i_BYPASSSEL		((1 << 16) | 304)
+#define NX_TIEOFF_USB20HOST0_i_COMPDISTUNE		((3 << 16) | 305)
+#define NX_TIEOFF_USB20HOST0_i_SQRXTUNE			((3 << 16) | 308)
+#define NX_TIEOFF_USB20HOST0_i_OTGTUNE			((3 << 16) | 311)
+#define NX_TIEOFF_USB20HOST0_i_TXHSXVTUNE		((2 << 16) | 314)
+#define NX_TIEOFF_USB20HOST0_i_TXFSLSTUNE		((4 << 16) | 316)
+#define NX_TIEOFF_USB20HOST0_i_TXVREFTUNE		((4 << 16) | 320)
+#define NX_TIEOFF_USB20HOST0_i_TXRISETUNE		((2 << 16) | 324)
+#define NX_TIEOFF_USB20HOST0_i_TXRESTUNE		((2 << 16) | 326)
+#define NX_TIEOFF_USB20HOST0_i_TXPREEMPAMPTUNE		((2 << 16) | 328)
+#define NX_TIEOFF_USB20HOST0_i_TXPREEMPPULSETUNE	((1 << 16) | 330)
+#define NX_TIEOFF_USB20HOST0_i_CHRGSEL			((1 << 16) | 331)
+#define NX_TIEOFF_USB20HOST0_i_VDATDETENB		((1 << 16) | 332)
+#define NX_TIEOFF_USB20HOST0_i_VDATSRCENB		((1 << 16) | 333)
+#define NX_TIEOFF_USB20HOST0_i_DCDENB			((1 << 16) | 334)
+#define NX_TIEOFF_USB20HOST0_i_ACAENB			((1 << 16) | 335)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXCVR		((1 << 16) | 336)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SIDDQ		((1 << 16) | 337)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_POR_ENB		((1 << 16) | 338)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_POR			((1 << 16) | 339)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKDIV		((7 << 16) | 340)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKSEL		((2 << 16) | 347)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_COMMONONN		((1 << 16) | 349)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_PORTRESET		((1 << 16) | 350)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_LOOPBACKENB		((1 << 16) | 351)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_DPPULLDOWN		((1 << 16) | 352)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_DMPULLDOWN		((1 << 16) | 353)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM_ENB	((1 << 16) | 354)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM		((1 << 16) | 355)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM_ENB		((1 << 16) | 356)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM		((1 << 16) | 357)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXOPU		((1 << 16) | 358)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE_ENB		((1 << 16) | 359)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE		((2 << 16) | 360)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT_ENB	((1 << 16) | 362)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT		((1 << 16) | 363)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE_ENB	((1 << 16) | 364)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE	((1 << 16) | 365)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFEN	((1 << 16) | 366)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFENH	((1 << 16) | 367)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPUTUNE		((2 << 16) | 368)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPDTUNE		((2 << 16) | 370)
+#define NX_TIEOFF_USB20HOST0_i_HSIC_TXSRTUNE		((4 << 16) | 372)
+#define NX_TIEOFF_USB20OTG0_i_nPowerDown		((1 << 16) | 376)
+#define NX_TIEOFF_USB20OTG0_i_nSleep			((1 << 16) | 377)
+#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMA		((3 << 16) | 378)
+#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMAW		((2 << 16) | 381)
+#define NX_TIEOFF_USB20OTG0_i_ss_scaledown_mode		((2 << 16) | 384)
+#define NX_TIEOFF_USB20OTG0_i_gp_in			((16 << 16) | 386)
+#define NX_TIEOFF_USB20OTG0_i_sof_count			((14 << 16) | 402)
+#define NX_TIEOFF_USB20OTG0_i_sys_dma_done		((1 << 16) | 416)
+#define NX_TIEOFF_USB20OTG0_i_if_select_hsic		((1 << 16) | 417)
+#define NX_TIEOFF_USB20OTG0_i_nResetSync		((1 << 16) | 418)
+#define NX_TIEOFF_USB20OTG0_i_nUtmiResetSync		((1 << 16) | 419)
+#define NX_TIEOFF_USB20OTG0_i_SIDDQ			((1 << 16) | 420)
+#define NX_TIEOFF_USB20OTG0_i_VATESTENB			((2 << 16) | 421)
+#define NX_TIEOFF_USB20OTG0_i_POR_ENB			((1 << 16) | 423)
+#define NX_TIEOFF_USB20OTG0_i_POR			((1 << 16) | 424)
+#define NX_TIEOFF_USB20OTG0_i_REFCLKSEL			((2 << 16) | 425)
+#define NX_TIEOFF_USB20OTG0_i_FSEL			((3 << 16) | 427)
+#define NX_TIEOFF_USB20OTG0_i_COMMONONN			((1 << 16) | 430)
+#define NX_TIEOFF_USB20OTG0_i_RESREQIN			((1 << 16) | 431)
+#define NX_TIEOFF_USB20OTG0_i_PORTRESET			((1 << 16) | 432)
+#define NX_TIEOFF_USB20OTG0_i_OTGDISABLE		((1 << 16) | 433)
+#define NX_TIEOFF_USB20OTG0_i_LOOPBACKENB		((1 << 16) | 434)
+#define NX_TIEOFF_USB20OTG0_i_IDPULLUP			((1 << 16) | 435)
+#define NX_TIEOFF_USB20OTG0_i_DRVVBUS			((1 << 16) | 436)
+#define NX_TIEOFF_USB20OTG0_i_ADPCHRG			((1 << 16) | 437)
+#define NX_TIEOFF_USB20OTG0_i_ADPDISCHRG		((1 << 16) | 438)
+#define NX_TIEOFF_USB20OTG0_i_ADPPRBENB			((1 << 16) | 439)
+#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXT		((1 << 16) | 440)
+#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXTSEL		((1 << 16) | 441)
+#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN		((1 << 16) | 442)
+#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN		((1 << 16) | 443)
+#define NX_TIEOFF_USB20OTG0_i_SUSPENDM_ENB		((1 << 16) | 444)
+#define NX_TIEOFF_USB20OTG0_i_SUSPENDM			((1 << 16) | 445)
+#define NX_TIEOFF_USB20OTG0_i_SLEEPM_ENB		((1 << 16) | 446)
+#define NX_TIEOFF_USB20OTG0_i_SLEEPM			((1 << 16) | 447)
+#define NX_TIEOFF_USB20OTG0_i_OPMODE_ENB		((1 << 16) | 448)
+#define NX_TIEOFF_USB20OTG0_i_OPMODE			((2 << 16) | 449)
+#define NX_TIEOFF_USB20OTG0_i_TERMSEL_ENB		((1 << 16) | 451)
+#define NX_TIEOFF_USB20OTG0_i_TERMSEL			((1 << 16) | 452)
+#define NX_TIEOFF_USB20OTG0_i_XCVRSEL_ENB		((1 << 16) | 453)
+#define NX_TIEOFF_USB20OTG0_i_XCVRSEL			((2 << 16) | 454)
+#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE_ENB		((1 << 16) | 456)
+#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE		((1 << 16) | 457)
+#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFEN		((1 << 16) | 458)
+#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFENH		((1 << 16) | 459)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDPDATA		((1 << 16) | 460)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDMDATA		((1 << 16) | 461)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDPEN		((1 << 16) | 462)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSDMEN		((1 << 16) | 463)
+#define NX_TIEOFF_USB20OTG0_i_BYPASSSEL			((1 << 16) | 464)
+#define NX_TIEOFF_USB20OTG0_i_COMPDISTUNE		((3 << 16) | 465)
+#define NX_TIEOFF_USB20OTG0_i_SQRXTUNE			((3 << 16) | 468)
+#define NX_TIEOFF_USB20OTG0_i_OTGTUNE			((3 << 16) | 471)
+#define NX_TIEOFF_USB20OTG0_i_TXHSXVTUNE		((2 << 16) | 474)
+#define NX_TIEOFF_USB20OTG0_i_TXFSLSTUNE		((4 << 16) | 476)
+#define NX_TIEOFF_USB20OTG0_i_TXVREFTUNE		((4 << 16) | 480)
+#define NX_TIEOFF_USB20OTG0_i_TXRISETUNE		((2 << 16) | 484)
+#define NX_TIEOFF_USB20OTG0_i_TXRESTUNE			((2 << 16) | 486)
+#define NX_TIEOFF_USB20OTG0_i_TXPREEMPAMPTUNE		((2 << 16) | 488)
+#define NX_TIEOFF_USB20OTG0_i_TXPREEMPPULSETUNE		((1 << 16) | 490)
+#define NX_TIEOFF_USB20OTG0_i_CHRGSEL			((1 << 16) | 491)
+#define NX_TIEOFF_USB20OTG0_i_VDATDETENB		((1 << 16) | 492)
+#define NX_TIEOFF_USB20OTG0_i_VDATSRCENB		((1 << 16) | 493)
+#define NX_TIEOFF_USB20OTG0_i_DCDENB			((1 << 16) | 494)
+#define NX_TIEOFF_USB20OTG0_i_ACAENB			((1 << 16) | 495)
+#define NX_TIEOFF_USB20OTG0_i_IDPULLUP_ENB		((1 << 16) | 496)
+#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN_ENB		((1 << 16) | 497)
+#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN_ENB		((1 << 16) | 498)
+#define NX_TIEOFF_USB20OTG0_i_DRVVBUS_ENB		((1 << 16) | 499)
+#define NX_TIEOFF_USB20OTG0_i_LPMClkMuxCntrl		((1 << 16) | 500)
+#define NX_TIEOFF_USB20OTG0_i_GLITCHLESSMUXCntrl	((1 << 16) | 501)
+#define NX_TIEOFF_CODA9600_i_nPWRDN00			((4 << 16) | 502)
+#define NX_TIEOFF_CODA9600_i_nSLEEP00			((4 << 16) | 506)
+#define NX_TIEOFF_CODA9600_i_nPWRDN01			((8 << 16) | 512)
+#define NX_TIEOFF_CODA9600_i_nSLEEP01			((8 << 16) | 520)
+#define NX_TIEOFF_CODA9600_i_nPWRDN02			((10 << 16) | 528)
+#define NX_TIEOFF_CODA9600_i_nSLEEP02			((10 << 16) | 544)
+#define NX_TIEOFF_CODA9600_i_nPWRDN03			((2 << 16) | 554)
+#define NX_TIEOFF_CODA9600_i_nSLEEP03			((2 << 16) | 556)
+#define NX_TIEOFF_CODA9600_i_nPWRDN04			((8 << 16) | 558)
+#define NX_TIEOFF_CODA9600_i_nSLEEP04			((8 << 16) | 566)
+#define NX_TIEOFF_CODA9600_i_nPWRDN05			((3 << 16) | 576)
+#define NX_TIEOFF_CODA9600_i_nSLEEP05			((3 << 16) | 579)
+#define NX_TIEOFF_CODA9600_i_nPWRDN06			((7 << 16) | 582)
+#define NX_TIEOFF_CODA9600_i_nSLEEP06			((7 << 16) | 589)
+#define NX_TIEOFF_CODA9600_i_nPWRDN07			((12 << 16) | 596)
+#define NX_TIEOFF_CODA9600_i_nSLEEP07			((12 << 16) | 608)
+#define NX_TIEOFF_CODA9600_i_nPWRDN08			((1 << 16) | 620)
+#define NX_TIEOFF_CODA9600_i_nSLEEP08			((1 << 16) | 621)
+#define NX_TIEOFF_CODA9600_i_nPWRDN09			((2 << 16) | 622)
+#define NX_TIEOFF_CODA9600_i_nSLEEP09			((2 << 16) | 624)
+#define NX_TIEOFF_CODA9600_i_nPWRDN10			((10 << 16) | 626)
+#define NX_TIEOFF_CODA9600_i_nSLEEP10			((10 << 16) | 640)
+#define NX_TIEOFF_CODA9600_i_nPWRDN11			((1 << 16) | 650)
+#define NX_TIEOFF_CODA9600_i_nSLEEP11			((1 << 16) | 651)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAA		((3 << 16) | 652)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAB		((3 << 16) | 655)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAA		((3 << 16) | 658)
+#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAB		((3 << 16) | 661)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAA		((3 << 16) | 664)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAB		((3 << 16) | 667)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWA		((2 << 16) | 670)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWB		((2 << 16) | 672)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAA		((3 << 16) | 674)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAB		((3 << 16) | 677)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWA		((2 << 16) | 680)
+#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWB		((2 << 16) | 682)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMA		((3 << 16) | 684)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMAW		((2 << 16) | 687)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMA		((3 << 16) | 689)
+#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMAW		((2 << 16) | 692)
+#define NX_TIEOFF_DWC_GMAC0_sbd_flowctrl_i		((1 << 16) | 694)
+#define NX_TIEOFF_DWC_GMAC0_phy_intf_sel_i		((3 << 16) | 695)
+#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAA		((3 << 16) | 698)
+#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAB		((3 << 16) | 701)
+#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAA		((3 << 16) | 704)
+#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAB		((3 << 16) | 707)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMA		((3 << 16) | 710)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMAW		((2 << 16) | 713)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMA		((3 << 16) | 715)
+#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMAW		((2 << 16) | 718)
+#define NX_TIEOFF_MALI4000_PWRDNBYPASS			((1 << 16) | 720)
+#define NX_TIEOFF_MALI4000_GP_NX_NPOWERDOWN		((15 << 16) | 721)
+#define NX_TIEOFF_MALI4000_GP_NX_NSLEEP			((15 << 16) | 736)
+#define NX_TIEOFF_MALI4000_L2_NX_NPOWERDOWN		((3 << 16) | 751)
+#define NX_TIEOFF_MALI4000_L2_NX_NSLEEP			((3 << 16) | 754)
+#define NX_TIEOFF_MALI4000_PP0_NX_NPOWERDOWN		((32 << 16) | 768)
+#define NX_TIEOFF_MALI4000_PP0_NX_NSLEEP		((32 << 16) | 800)
+#define NX_TIEOFF_MALI4000_PP1_NX_NPOWERDOWN		((32 << 16) | 832)
+#define NX_TIEOFF_MALI4000_PP1_NX_NSLEEP		((32 << 16) | 864)
+#define NX_TIEOFF_MALI4000_PP2_NX_NPOWERDOWN		((32 << 16) | 896)
+#define NX_TIEOFF_MALI4000_PP2_NX_NSLEEP		((32 << 16) | 928)
+#define NX_TIEOFF_MALI4000_PP3_NX_NPOWERDOWN		((32 << 16) | 960)
+#define NX_TIEOFF_MALI4000_PP3_NX_NSLEEP		((32 << 16) | 992)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm9	((1 << 16) | 1024)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm10	((1 << 16) | 1025)
+#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm16	((1 << 16) | 1026)
+#define NX_TIEOFF_A3BM_AXI_TOP_MASTER_BUS0_REMAP	((2 << 16) | 1027)
+#if defined(CONFIG_ARCH_S5P6818)
+#define NX_TIEOFF_Inst_ARMTOP_SMPEN			((4 << 16) | 2816)
+#define NX_TIEOFF_Inst_ARMTOP_STANBYWFI			((4 << 16) | 2880)
+#define NX_TIEOFF_Inst_ARMTOP_STANBYWFIL2		((1 << 16) | 2884)
+#define NX_TIEOFF_Inst_ARMTOP_DBGNOPWRDWN		((4 << 16) | 2889)
+#define NX_TIEOFF_Inst_ARMTOP_DBGPWRUPREQ		((4 << 16) | 2893)
+#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNPRE		((1 << 16) | 2901)
+#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNPRE		((1 << 16) | 2902)
+#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNPRE		((1 << 16) | 2903)
+#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNPRE		((1 << 16) | 2904)
+#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNPRE		((1 << 16) | 2905)
+#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNALL		((1 << 16) | 2906)
+#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNALL		((1 << 16) | 2907)
+#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNALL		((1 << 16) | 2908)
+#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNALL		((1 << 16) | 2909)
+#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNALL		((1 << 16) | 2910)
+#define NX_TIEOFF_Inst_ARMTOP_CLAMPL2			((1 << 16) | 2920)
+#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHREQ		((1 << 16) | 3018)
+#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHDONE		((1 << 16) | 3019)
+#define NX_TIEOFF_Inst_ARMTOP_ACINACTM			((1 << 16) | 3023)
+#define NX_TIEOFF_Inst_ARMTOP_P1_SMPEN			((4 << 16) | 3360)
+#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFI		((4 << 16) | 3424)
+#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFIL2		((1 << 16) | 3428)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGNOPWRDWN		((4 << 16) | 3442)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRUPREQ		((4 << 16) | 3443)
+#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRDUP		((4 << 16) | 3444)
+#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNPRE		((1 << 16) | 3445)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNPRE		((1 << 16) | 3446)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNPRE		((1 << 16) | 3447)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNPRE		((1 << 16) | 3448)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNPRE		((1 << 16) | 3449)
+#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNALL		((1 << 16) | 3450)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNALL		((1 << 16) | 3451)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNALL		((1 << 16) | 3452)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNALL		((1 << 16) | 3453)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNALL		((1 << 16) | 3454)
+#define NX_TIEOFF_Inst_ARMTOP_P1_CLAMPL2		((1 << 16) | 3464)
+#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHREQ		((1 << 16) | 3562)
+#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHDONE		((1 << 16) | 3563)
+#define NX_TIEOFF_Inst_ARMTOP_P1_ACINACTM		((1 << 16) | 3567)
+#endif
+
+#endif /* _NEXELL_TIEOFF_H */
-- 
1.9.1



More information about the U-Boot mailing list