[PATCH 28/30] spi: Enable missing CONFIG_SPL_DM_SPI support

[Adam Ford]

On Wed, Jun 10, 2020 at 3:17 PM Tom Rini <trini at konsulko.com> wrote:
>
> Due to how the Makefile logic is we currently get DM_SPI support in SPL
> enabled by having DM_SPI enabled for full U-Boot but not having
> CONFIG_SPL_DM_SPI set.  Add this missing option to boards that were
> inadvertently making use of it.

Not knowing exactly which patches to apply to see the Makefile changes
in question, I'm just doing a code review instead of the test.
>
> Cc: Adam Ford <aford173 at gmail.com>
[snip]

Acked-by: Adam Ford <aford173 at gmail.com> #da850evm

> Signed-off-by: Tom Rini <trini at konsulko.com>
> ---

>  configs/da850evm_defconfig                                     | 1 +
>  configs/da850evm_nand_defconfig                                | 1 +

The da850evm_defconfig is setup to boot from SPI Flash, so that board
will need it.  Thank you.

The da850evm_nand_defconfig is set to boot from NAND via the NAND
controller and not SPI, so it's probably not necessary, but  I don't
think it hurts anything. I may go through later and remove the
CONFIG_SPL_DM_SPI from the nand version later.

[snip]

> diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
> index 1a6a97ed161a..12768065f3ab 100644
> --- a/configs/da850evm_defconfig
> +++ b/configs/da850evm_defconfig
> @@ -12,6 +12,7 @@ CONFIG_ENV_OFFSET=0x80000
>  CONFIG_ENV_SECT_SIZE=0x10000
>  CONFIG_SYS_SPI_U_BOOT_OFFS=0x8000
>  CONFIG_DM_GPIO=y
> +CONFIG_SPL_DM_SPI=y

Thank you, we'll need this.

>  CONFIG_SPL_SERIAL_SUPPORT=y
>  CONFIG_NR_DRAM_BANKS=1
>  CONFIG_SPL=y
> diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
> index e805f2c10eda..13026fd1ea2c 100644
> --- a/configs/da850evm_nand_defconfig
> +++ b/configs/da850evm_nand_defconfig
> @@ -11,6 +11,7 @@ CONFIG_ENV_SIZE=0x20000
>  CONFIG_ENV_OFFSET=0x0
>  CONFIG_SYS_SPI_U_BOOT_OFFS=0x8000
>  CONFIG_DM_GPIO=y
> +CONFIG_SPL_DM_SPI=y

If you do a V2 for some reason and don't want to add this here in the
future, I wouldn't object.  If not, I'll do some testing later with
this removed.

>  CONFIG_SPL_SERIAL_SUPPORT=y
>  CONFIG_SPL=y
>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
[snip]

> --
> 2.17.1
>