[PATCH v3 0/2] add optee support for broadcom NS3 soc

[Rayagonda Kokatanur]

This is fourth patch set series prepared on top of third
patch set ("add FIT image support for broadcom NS3 soc").

This patch adds optee support.

Changes from v2:
 -Address review comments from Simon,
  Remove own return code and use standard error code.
  Take out common lines from different functions and move them
  into common static function.
  Remove include <common.h> as its not required.
  Move functions with printf from header file into c file.

 -Address slef review comments,
  Remove optee dt node as this file is no longer in sync with linux.

Changes from v1:
 -Address review comments from Thomas Fitzsimmons,
  Expand the bnxt full form.

 -Address review comments from Simon Glass,
  Move c file from board/broadcom/bcmns3/chimp_optee.c to 
  drivers/tee/broadcom,
  Move header file from include/brcm/chimp.h to include/broadcom/chimp.h 

Vikas Gupta (2):
  drivers: tee: broadcom: add optee based bnxt fw load driver
  configs: ns3: enable tee and optee driver

 configs/bcm_ns3_defconfig          |   5 +-
 drivers/tee/Kconfig                |   1 +
 drivers/tee/Makefile               |   1 +
 drivers/tee/broadcom/Kconfig       |   7 ++
 drivers/tee/broadcom/Makefile      |   3 +
 drivers/tee/broadcom/chimp_optee.c | 182 +++++++++++++++++++++++++++++
 include/broadcom/chimp.h           |  16 +++
 7 files changed, 214 insertions(+), 1 deletion(-)
 create mode 100644 drivers/tee/broadcom/Kconfig
 create mode 100644 drivers/tee/broadcom/Makefile
 create mode 100644 drivers/tee/broadcom/chimp_optee.c
 create mode 100644 include/broadcom/chimp.h

-- 
2.17.1