[PATCH v2 2/8] arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator

Kever Yang kever.yang at rock-chips.com
Fri Jun 5 04:22:33 CEST 2020


On 2020/6/4 下午6:09, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
>
> The regulator enable-gpio uses opposite values for the declaration
> vs. the enable_active_low property, breaking the regulator enablement.
>
> Make the usbhost-supply work again by bringing them in sync again.
>
> This mimics the upstream Linux change found on:
> http://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/dts/rk3399-puma.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
> index 531520e771..72c06abd27 100644
> --- a/arch/arm/dts/rk3399-puma.dtsi
> +++ b/arch/arm/dts/rk3399-puma.dtsi
> @@ -101,7 +101,7 @@
>   
>   	vcc5v0_host: vcc5v0-host-regulator {
>   		compatible = "regulator-fixed";
> -		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
> +		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
>   		enable-active-low;
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&vcc5v0_host_en>;




More information about the U-Boot mailing list