[PATCH] ARM: imx: soc: Add reset for non-DM case

Stefano Babic sbabic at denx.de
Tue Jun 23 12:05:07 CEST 2020


Hi Everybody,

CC: Igor / Oleksandr from Toradex


On 22.05.20 01:14, Marek Vasut wrote:
> This is another in series of patches which remove ad-hoc reset_cpu()
> hacks from board files. This one is for iMX7, so implement default
> reset_cpu() there to prevent it from showing up in board files.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: NXP i.MX U-Boot Team <uboot-imx at nxp.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
>  arch/arm/mach-imx/mx7/soc.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
> index 798fe74a3d..e7c71dfe8e 100644
> --- a/arch/arm/mach-imx/mx7/soc.c
> +++ b/arch/arm/mach-imx/mx7/soc.c
> @@ -18,6 +18,7 @@
>  #include <env.h>
>  #include <imx_thermal.h>
>  #include <fsl_sec.h>
> +#include <fsl_wdog.h>
>  #include <asm/setup.h>
>  #include <linux/delay.h>
>  
> @@ -419,3 +420,15 @@ void reset_misc(void)
>  #endif
>  }
>  
> +#if !CONFIG_IS_ENABLED(SYSRESET)
> +void reset_cpu(ulong addr)
> +{
> +	struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
> +
> +	/* Clear WDA to trigger WDOG_B immediately */
> +	writew(SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS, &wdog->wcr);
> +
> +	while (1)
> +		;
> +}
> +#endif
> 

The patch is in the right direction, but rather this breaks Toradex's
colibri i.MX7. However, reset should not coded in a board file and
boards should enable DM PMIC and simply use the provide reset
functionalities. Igor / Oleksandr, could you take a look at this ? I
will let this patch for a while in stand-by.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list