[PATCH] trivial: Fix booot occurences

[Jaehoon Chung]

On 6/5/20 6:45 PM, Michal Simek wrote:
> s/booot/boot/g
> 
> The first ase is booot instead of boot and second u-booot instead of
> u-boot.
> 
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

> ---
> 
>  board/freescale/p1010rdb/README.P1010RDB-PA | 2 +-
>  cmd/mmc.c                                   | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
> index 46c61237c727..0cb950d845e7 100644
> --- a/board/freescale/p1010rdb/README.P1010RDB-PA
> +++ b/board/freescale/p1010rdb/README.P1010RDB-PA
> @@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off'
>  Setting of hwconfig
>  ===================
>  If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
> -"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
> +"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example:
>  setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
>  By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
>  is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
> diff --git a/cmd/mmc.c b/cmd/mmc.c
> index 97e5d91859c9..1c252e050282 100644
> --- a/cmd/mmc.c
> +++ b/cmd/mmc.c
> @@ -1004,7 +1004,7 @@ U_BOOT_CMD(
>  	"mmc part - lists available partition on current mmc device\n"
>  	"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
>  	"mmc list - lists available devices\n"
> -	"mmc wp - power on write protect booot partitions\n"
> +	"mmc wp - power on write protect boot partitions\n"
>  #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
>  	"mmc hwpartition [args...] - does hardware partitioning\n"
>  	"  arguments (sizes in 512-byte blocks):\n"
>