[PATCHv2 05/13] configs: p1_p2_rdb: Add the default address of vsc7385 firmware

Zhiqiang Hou Zhiqiang.Hou at nxp.com
Fri Jun 5 10:55:09 CEST 2020


From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Add the environment 'vscfw_addr' to assign a default address for
vsc7385 firmware uploading.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
V2:
 - Rebase the patch, no change intended.

 include/configs/p1_p2_rdb_pc.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index d59fd033bd..c1c2adcd5e 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -461,6 +461,7 @@
 
 /* Vsc7385 switch */
 #ifdef CONFIG_VSC7385_ENET
+#define __VSCFW_ADDR			"vscfw_addr=ef000000"
 #define CONFIG_SYS_VSC7385_BASE		0xffb00000
 
 #ifdef CONFIG_PHYS_64BIT
@@ -820,6 +821,7 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset
 "ramdisk_size=120000\0"	\
 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
+__stringify(__VSCFW_ADDR)"\0" \
 __stringify(__NOR_RST_CMD)"\0" \
 __stringify(__SPI_RST_CMD)"\0" \
 __stringify(__SD_RST_CMD)"\0" \
-- 
2.25.1



More information about the U-Boot mailing list