[PATCH] usb: xhci-dwc3: Fix usage of bulk PHY API

[Chunfeng Yun]

Hi Samuel,

This bug was fixed up two weeks ago, 
https://patchwork.ozlabs.org/project/uboot/patch/1589435712-8795-1-git-send-email-chunfeng.yun@mediatek.com/

thanks

On Sat, 2020-05-30 at 03:37 -0500, Samuel Holland wrote:
> The PHY consumer is responsible for allocating the struct phy_bulk.
> During conversion to the bulk API, the contents of the struct were
> replaced by a pointer instead of the struct itself. This leads to a null
> pointer dereference in generic_phy_get_bulk() when setting bulk->phys.
> 
> Fixes: 6dfb8a8052ee ("usb: dwc3: use the phy bulk API to get phys")
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
>  drivers/usb/host/xhci-dwc3.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
> index 563db1a426..9b22f271a7 100644
> --- a/drivers/usb/host/xhci-dwc3.c
> +++ b/drivers/usb/host/xhci-dwc3.c
> @@ -19,7 +19,7 @@
>  #include <linux/usb/otg.h>
>  
>  struct xhci_dwc3_platdata {
> -	struct phy_bulk *usb_phys;
> +	struct phy_bulk usb_phys;
>  };
>  
>  void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
> @@ -124,7 +124,7 @@ static int xhci_dwc3_probe(struct udevice *dev)
>  	hcor = (struct xhci_hcor *)((uintptr_t)hccr +
>  			HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
>  
> -	ret = dwc3_setup_phy(dev, plat->usb_phys);
> +	ret = dwc3_setup_phy(dev, &plat->usb_phys);
>  	if (ret && (ret != -ENOTSUPP))
>  		return ret;
>  
> @@ -167,7 +167,7 @@ static int xhci_dwc3_remove(struct udevice *dev)
>  {
>  	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
>  
> -	dwc3_shutdown_phy(dev, plat->usb_phys);
> +	dwc3_shutdown_phy(dev, &plat->usb_phys);
>  
>  	return xhci_deregister(dev);
>  }