[PATCH] rockchip: rk3399: allow deselecting SPL_ATF_NO_PLATFORM_PARAM

Kever Yang kever.yang at rock-chips.com
Sat Jun 27 16:36:24 CEST 2020


On 2020/6/16 上午7:30, Hugh Cole-Baker wrote:
> SPL_ATF_NO_PLATFORM_PARAM is selected by default for RK3399 configs, to
> guard against issues when used with TF-A versions that perform
> insufficient validation on the platform parameter. However, since commit
> 8109f738ffa7 "rockchip: increase FDT buffer size" in TF-A, passing a
> device tree as platform parameter no longer causes problems for upstream
> TF-A for RK3399.
>
> Since SPL_ATF_NO_PLATFORM_PARAM doesn't need to be selected when using
> upstream TF-A, change the Kconfig option from select to imply. It'll
> still default to being selected but can be deselected by a user if they
> know they will be using a compatible version of TF-A.
>
> Signed-off-by: Hugh Cole-Baker <sigmaris at gmail.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> For some background, see this thread on the TF-A list [1].
>
> Since the corresponding required change isn't in a tagged version of
> TF-A yet, and I don't know how many RK3399 boards are normally used with
> older TF-A versions which required this option, I think it's safest to
> keep the default as not sending a platform param to TF-A. Once the next
> TF-A version is released, SPL_ATF_NO_PLATFORM_PARAM could be turned off
> in defconfigs for boards that use the latest upstream TF-A.
>
> [1]: https://lists.trustedfirmware.org/pipermail/tf-a/2020-June/000502.html
>
>   arch/arm/mach-rockchip/Kconfig | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index 0cb1f23d0f3..e2b63265846 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -207,7 +207,6 @@ config ROCKCHIP_RK3399
>   	select SUPPORT_TPL
>   	select SPL
>   	select SPL_ATF
> -	select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
>   	select SPL_BOARD_INIT if SPL
>   	select SPL_LOAD_FIT
>   	select SPL_CLK if SPL
> @@ -232,6 +231,7 @@ config ROCKCHIP_RK3399
>   	imply PRE_CONSOLE_BUFFER
>   	imply ROCKCHIP_COMMON_BOARD
>   	imply ROCKCHIP_SDRAM_COMMON
> +	imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
>   	imply SPL_ROCKCHIP_COMMON_BOARD
>   	imply TPL_SERIAL_SUPPORT
>   	imply TPL_LIBCOMMON_SUPPORT




More information about the U-Boot mailing list