[PATCH v2 17/23] ti: Drop omap5 uevm

Lokesh Vutla lokeshvutla at ti.com
Fri Jun 5 06:32:01 CEST 2020


Hi Jagan,

On 27/05/20 6:26 pm, Jagan Teki wrote:
> DM, DM_SPI and other driver model migration deadlines
> are expired for this board.
> 
> Drop it.
> 
> Cc: Lokesh Vutla <lokeshvutla at ti.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Please hold this patch. I see patches in ML for converting to DM
https://patchwork.ozlabs.org/project/uboot/list/?series=180914

Thanks and regards,
Lokesh

> ---
> Changes for v2:
> - none
> 
>  arch/arm/mach-omap2/omap5/Kconfig |   4 -
>  board/ti/omap5_uevm/Kconfig       |  12 --
>  board/ti/omap5_uevm/MAINTAINERS   |   6 -
>  board/ti/omap5_uevm/Makefile      |   6 -
>  board/ti/omap5_uevm/README        |  25 ---
>  board/ti/omap5_uevm/evm.c         | 283 ------------------------------
>  board/ti/omap5_uevm/mux_data.h    |  57 ------
>  configs/omap5_uevm_defconfig      |  55 ------
>  include/configs/omap5_uevm.h      |  62 -------
>  9 files changed, 510 deletions(-)
>  delete mode 100644 board/ti/omap5_uevm/Kconfig
>  delete mode 100644 board/ti/omap5_uevm/MAINTAINERS
>  delete mode 100644 board/ti/omap5_uevm/Makefile
>  delete mode 100644 board/ti/omap5_uevm/README
>  delete mode 100644 board/ti/omap5_uevm/evm.c
>  delete mode 100644 board/ti/omap5_uevm/mux_data.h
>  delete mode 100644 configs/omap5_uevm_defconfig
>  delete mode 100644 include/configs/omap5_uevm.h
> 
> diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig
> index a0c0b93a00..e73106e321 100644
> --- a/arch/arm/mach-omap2/omap5/Kconfig
> +++ b/arch/arm/mach-omap2/omap5/Kconfig
> @@ -9,9 +9,6 @@ choice
>  	prompt "OMAP5 board select"
>  	optional
>  
> -config TARGET_OMAP5_UEVM
> -	bool "TI OMAP5 uEVM board"
> -
>  config TARGET_DRA7XX_EVM
>  	bool "TI DRA7XX"
>  	select BOARD_LATE_INIT
> @@ -153,7 +150,6 @@ endchoice
>  endmenu
>  endif
>  
> -source "board/ti/omap5_uevm/Kconfig"
>  source "board/ti/dra7xx/Kconfig"
>  source "board/ti/am57xx/Kconfig"
>  
> diff --git a/board/ti/omap5_uevm/Kconfig b/board/ti/omap5_uevm/Kconfig
> deleted file mode 100644
> index aa13844544..0000000000
> --- a/board/ti/omap5_uevm/Kconfig
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -if TARGET_OMAP5_UEVM
> -
> -config SYS_BOARD
> -	default "omap5_uevm"
> -
> -config SYS_VENDOR
> -	default "ti"
> -
> -config SYS_CONFIG_NAME
> -	default "omap5_uevm"
> -
> -endif
> diff --git a/board/ti/omap5_uevm/MAINTAINERS b/board/ti/omap5_uevm/MAINTAINERS
> deleted file mode 100644
> index 280ea2f91f..0000000000
> --- a/board/ti/omap5_uevm/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -OMAP5_UEVM BOARD
> -M:	Lokesh Vutla <lokeshvutla at ti.com>
> -S:	Maintained
> -F:	board/ti/omap5_uevm/
> -F:	include/configs/omap5_uevm.h
> -F:	configs/omap5_uevm_defconfig
> diff --git a/board/ti/omap5_uevm/Makefile b/board/ti/omap5_uevm/Makefile
> deleted file mode 100644
> index 17ee516d26..0000000000
> --- a/board/ti/omap5_uevm/Makefile
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# (C) Copyright 2000, 2001, 2002
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -
> -obj-y	:= evm.o
> diff --git a/board/ti/omap5_uevm/README b/board/ti/omap5_uevm/README
> deleted file mode 100644
> index 970e2eceb7..0000000000
> --- a/board/ti/omap5_uevm/README
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -Summary
> -=======
> -
> -This document covers various features of the 'omap5_uevm' build and some
> -related uses.
> -
> -eMMC boot partition use
> -=======================
> -
> -It is possible, depending on SYSBOOT configuration to boot from the eMMC
> -boot partitions using (name depending on documentation referenced)
> -Alternative Boot operation mode or Boot Sequence Option 1/2.  In this
> -example we load MLO and u-boot.img from the build into DDR and then use
> -'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
> -set boot0 as the boot device.
> -U-Boot # setenv autoload no
> -U-Boot # usb start
> -U-Boot # dhcp
> -U-Boot # mmc dev 1 1
> -U-Boot # tftp ${loadaddr} omap5uevm/MLO
> -U-Boot # mmc write ${loadaddr} 0 100
> -U-Boot # tftp ${loadaddr} omap5uevm/u-boot.img
> -U-Boot # mmc write ${loadaddr} 300 400
> -U-Boot # mmc bootbus 1 2 0 2
> -U-Boot # mmc partconf 1 1 1 0
> diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
> deleted file mode 100644
> index e35f319b46..0000000000
> --- a/board/ti/omap5_uevm/evm.c
> +++ /dev/null
> @@ -1,283 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * (C) Copyright 2010
> - * Texas Instruments Incorporated, <www.ti.com>
> - * Aneesh V       <aneesh at ti.com>
> - * Steve Sakoman  <steve at sakoman.com>
> - */
> -#include <common.h>
> -#include <init.h>
> -#include <net.h>
> -#include <palmas.h>
> -#include <asm/arch/omap.h>
> -#include <asm/arch/sys_proto.h>
> -#include <asm/arch/mmc_host_def.h>
> -#include <tca642x.h>
> -#include <usb.h>
> -#include <linux/delay.h>
> -#include <linux/usb/gadget.h>
> -#include <dwc3-uboot.h>
> -#include <dwc3-omap-uboot.h>
> -#include <ti-usb-phy-uboot.h>
> -
> -#include "mux_data.h"
> -
> -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
> -#include <sata.h>
> -#include <usb.h>
> -#include <asm/gpio.h>
> -#include <asm/mach-types.h>
> -#include <asm/arch/clock.h>
> -#include <asm/arch/ehci.h>
> -#include <asm/ehci-omap.h>
> -#include <asm/arch/sata.h>
> -
> -#define DIE_ID_REG_BASE     (OMAP54XX_L4_CORE_BASE + 0x2000)
> -#define DIE_ID_REG_OFFSET	0x200
> -
> -#endif
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -const struct omap_sysinfo sysinfo = {
> -	"Board: OMAP5432 uEVM\n"
> -};
> -
> -/**
> - * @brief tca642x_init - uEVM default values for the GPIO expander
> - * input reg, output reg, polarity reg, configuration reg
> - */
> -struct tca642x_bank_info tca642x_init[] = {
> -	{ .input_reg = 0x00,
> -	  .output_reg = 0x04,
> -	  .polarity_reg = 0x00,
> -	  .configuration_reg = 0x80 },
> -	{ .input_reg = 0x00,
> -	  .output_reg = 0x00,
> -	  .polarity_reg = 0x00,
> -	  .configuration_reg = 0xff },
> -	{ .input_reg = 0x00,
> -	  .output_reg = 0x00,
> -	  .polarity_reg = 0x00,
> -	  .configuration_reg = 0x40 },
> -};
> -
> -#ifdef CONFIG_USB_DWC3
> -static struct dwc3_device usb_otg_ss = {
> -	.maximum_speed = USB_SPEED_SUPER,
> -	.base = OMAP5XX_USB_OTG_SS_BASE,
> -	.tx_fifo_resize = false,
> -	.index = 0,
> -};
> -
> -static struct dwc3_omap_device usb_otg_ss_glue = {
> -	.base = (void *)OMAP5XX_USB_OTG_SS_GLUE_BASE,
> -	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
> -	.index = 0,
> -};
> -
> -static struct ti_usb_phy_device usb_phy_device = {
> -	.pll_ctrl_base = (void *)OMAP5XX_USB3_PHY_PLL_CTRL,
> -	.usb2_phy_power = (void *)OMAP5XX_USB2_PHY_POWER,
> -	.usb3_phy_power = (void *)OMAP5XX_USB3_PHY_POWER,
> -	.index = 0,
> -};
> -
> -int board_usb_init(int index, enum usb_init_type init)
> -{
> -	if (index) {
> -		printf("Invalid Controller Index\n");
> -		return -EINVAL;
> -	}
> -
> -	if (init == USB_INIT_DEVICE) {
> -		usb_otg_ss.dr_mode = USB_DR_MODE_PERIPHERAL;
> -		usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
> -	} else {
> -		usb_otg_ss.dr_mode = USB_DR_MODE_HOST;
> -		usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
> -	}
> -
> -	enable_usb_clocks(index);
> -	ti_usb_phy_uboot_init(&usb_phy_device);
> -	dwc3_omap_uboot_init(&usb_otg_ss_glue);
> -	dwc3_uboot_init(&usb_otg_ss);
> -
> -	return 0;
> -}
> -
> -int board_usb_cleanup(int index, enum usb_init_type init)
> -{
> -	if (index) {
> -		printf("Invalid Controller Index\n");
> -		return -EINVAL;
> -	}
> -
> -	ti_usb_phy_uboot_exit(index);
> -	dwc3_uboot_exit(index);
> -	dwc3_omap_uboot_exit(index);
> -	disable_usb_clocks(index);
> -
> -	return 0;
> -}
> -
> -int usb_gadget_handle_interrupts(int index)
> -{
> -	u32 status;
> -
> -	status = dwc3_omap_uboot_interrupt_status(index);
> -	if (status)
> -		dwc3_uboot_handle_interrupt(index);
> -
> -	return 0;
> -}
> -#endif
> -
> -/**
> - * @brief board_init
> - *
> - * @return 0
> - */
> -int board_init(void)
> -{
> -	gpmc_init();
> -	gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
> -	gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
> -
> -	tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init);
> -
> -	return 0;
> -}
> -
> -int board_eth_init(bd_t *bis)
> -{
> -	return 0;
> -}
> -
> -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
> -static void enable_host_clocks(void)
> -{
> -	int auxclk;
> -	int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
> -				OPTFCLKEN_HSIC480M_P3_CLK |
> -				OPTFCLKEN_HSIC60M_P2_CLK |
> -				OPTFCLKEN_HSIC480M_P2_CLK |
> -				OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
> -
> -	/* Enable port 2 and 3 clocks*/
> -	setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
> -
> -	/* Enable port 2 and 3 usb host ports tll clocks*/
> -	setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
> -			(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
> -#ifdef CONFIG_USB_XHCI_OMAP
> -	/* Enable the USB OTG Super speed clocks */
> -	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
> -			(OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
> -#endif
> -
> -	auxclk = readl((*prcm)->scrm_auxclk1);
> -	/* Request auxilary clock */
> -	auxclk |= AUXCLK_ENABLE_MASK;
> -	writel(auxclk, (*prcm)->scrm_auxclk1);
> -}
> -#endif
> -
> -/**
> - * @brief misc_init_r - Configure EVM board specific configurations
> - * such as power configurations, ethernet initialization as phase2 of
> - * boot sequence
> - *
> - * @return 0
> - */
> -int misc_init_r(void)
> -{
> -#ifdef CONFIG_PALMAS_POWER
> -	palmas_init_settings();
> -#endif
> -
> -	omap_die_id_usbethaddr();
> -
> -	return 0;
> -}
> -
> -void set_muxconf_regs(void)
> -{
> -	do_set_mux((*ctrl)->control_padconf_core_base,
> -		   core_padconf_array_essential,
> -		   sizeof(core_padconf_array_essential) /
> -		   sizeof(struct pad_conf_entry));
> -
> -	do_set_mux((*ctrl)->control_padconf_wkup_base,
> -		   wkup_padconf_array_essential,
> -		   sizeof(wkup_padconf_array_essential) /
> -		   sizeof(struct pad_conf_entry));
> -}
> -
> -#if defined(CONFIG_MMC)
> -int board_mmc_init(bd_t *bis)
> -{
> -	omap_mmc_init(0, 0, 0, -1, -1);
> -	omap_mmc_init(1, 0, 0, -1, -1);
> -	return 0;
> -}
> -#endif
> -
> -#ifdef CONFIG_USB_EHCI_HCD
> -static struct omap_usbhs_board_data usbhs_bdata = {
> -	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
> -	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
> -	.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
> -};
> -
> -int ehci_hcd_init(int index, enum usb_init_type init,
> -		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
> -{
> -	int ret;
> -
> -	enable_host_clocks();
> -
> -	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
> -	if (ret < 0) {
> -		puts("Failed to initialize ehci\n");
> -		return ret;
> -	}
> -
> -	return 0;
> -}
> -
> -int ehci_hcd_stop(void)
> -{
> -	return omap_ehci_hcd_stop();
> -}
> -
> -void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
> -{
> -	/* The LAN9730 needs to be reset after the port power has been set. */
> -	if (port == 3) {
> -		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
> -		udelay(10);
> -		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
> -	}
> -}
> -#endif
> -
> -#ifdef CONFIG_USB_XHCI_OMAP
> -/**
> - * @brief board_usb_init - Configure EVM board specific configurations
> - * for the LDO's and clocks for the USB blocks.
> - *
> - * @return 0
> - */
> -int board_usb_init(int index, enum usb_init_type init)
> -{
> -	int ret;
> -#ifdef CONFIG_PALMAS_USB_SS_PWR
> -	ret = palmas_enable_ss_ldo();
> -#endif
> -
> -	enable_host_clocks();
> -
> -	return 0;
> -}
> -#endif
> diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h
> deleted file mode 100644
> index 3c4ba47497..0000000000
> --- a/board/ti/omap5_uevm/mux_data.h
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2010
> - * Texas Instruments Incorporated, <www.ti.com>
> - *
> - *	Sricharan R		<r.sricharan at ti.com>
> - */
> -#ifndef _EVM5430_MUX_DATA_H
> -#define _EVM5430_MUX_DATA_H
> -
> -#include <asm/arch/mux_omap5.h>
> -
> -const struct pad_conf_entry core_padconf_array_essential[] = {
> -
> -	{EMMC_CLK, (PTU | IEN | M0)}, /*  EMMC_CLK   */
> -	{EMMC_CMD, (PTU | IEN | M0)}, /*  EMMC_CMD   */
> -	{EMMC_DATA0, (PTU | IEN | M0)}, /*  EMMC_DATA0 */
> -	{EMMC_DATA1, (PTU | IEN | M0)}, /*  EMMC_DATA1 */
> -	{EMMC_DATA2, (PTU | IEN | M0)}, /*  EMMC_DATA2 */
> -	{EMMC_DATA3, (PTU | IEN | M0)}, /*  EMMC_DATA3 */
> -	{EMMC_DATA4, (PTU | IEN | M0)}, /*  EMMC_DATA4 */
> -	{EMMC_DATA5, (PTU | IEN | M0)}, /*  EMMC_DATA5 */
> -	{EMMC_DATA6, (PTU | IEN | M0)}, /*  EMMC_DATA6 */
> -	{EMMC_DATA7, (PTU | IEN | M0)}, /*  EMMC_DATA7 */
> -	{SDCARD_CLK, (PTU | IEN | M0)}, /*  SDCARD_CLK  */
> -	{SDCARD_CMD, (PTU | IEN | M0)}, /*  SDCARD_CMD  */
> -	{SDCARD_DATA0, (PTU | IEN | M0)}, /*  SDCARD_DATA0*/
> -	{SDCARD_DATA1, (PTU | IEN | M0)}, /*  SDCARD_DATA1*/
> -	{SDCARD_DATA2, (PTU | IEN | M0)}, /*  SDCARD_DATA2*/
> -	{SDCARD_DATA3, (PTU | IEN | M0)}, /*  SDCARD_DATA3*/
> -	{UART3_RX_IRRX, (PTU | IEN | M0)}, /*  UART3_RX_IRRX    */
> -	{UART3_TX_IRTX, (M0)},    /*  UART3_TX_IRTX    */
> -	{USBB1_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB1_HSIC_STROBE */
> -	{USBB1_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB1_HSIC_DATA */
> -	{USBB2_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB2_HSIC_STROBE */
> -	{USBB2_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB2_HSIC_DATA  */
> -	{USBB3_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB3_HSIC_STROBE*/
> -	{USBB3_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB3_HSIC_DATA  */
> -	{USBD0_HS_DP, (IEN | M0)},	/*  USBD0_HS_DP */
> -	{USBD0_HS_DM, (IEN | M0)},	/*  USBD0_HS_DM */
> -	{USBD0_SS_RX, (IEN | M0)},	/*  USBD0_SS_RX */
> -	{I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */
> -	{I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */
> -	{HSI2_ACWAKE, (PTU | M6)},    /*  HSI2_ACWAKE */
> -	{HSI2_CAFLAG, (PTU | M6)},    /*  HSI2_CAFLAG */
> -};
> -
> -const struct pad_conf_entry wkup_padconf_array_essential[] = {
> -
> -	{SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
> -	{SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
> -	{SYS_32K, (IEN | M0)}, /*  SYS_32K     */
> -	{FREF_CLK1_OUT, (PTD | IEN | M0)},    /*  FREF_CLK1_OUT  */
> -
> -};
> -
> -#endif /* _EVM4430_MUX_DATA_H */
> diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig
> deleted file mode 100644
> index 487f7f305c..0000000000
> --- a/configs/omap5_uevm_defconfig
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_ARCH_OMAP2PLUS=y
> -CONFIG_OMAP54XX=y
> -CONFIG_TARGET_OMAP5_UEVM=y
> -CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC=16296
> -CONFIG_SPL=y
> -CONFIG_ENV_OFFSET_REDUND=0x280000
> -CONFIG_ARMV7_LPAE=y
> -CONFIG_SPL_TEXT_BASE=0x40300000
> -CONFIG_DISTRO_DEFAULTS=y
> -# CONFIG_USE_BOOTCOMMAND is not set
> -CONFIG_SYS_CONSOLE_INFO_QUIET=y
> -CONFIG_VERSION_VARIABLE=y
> -# CONFIG_SPL_NAND_SUPPORT is not set
> -CONFIG_SPL_OS_BOOT=y
> -CONFIG_CMD_SPL=y
> -CONFIG_CMD_ASKENV=y
> -CONFIG_CMD_DFU=y
> -CONFIG_CMD_GPIO=y
> -CONFIG_CMD_GPT=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SPI=y
> -CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_EXT4_WRITE=y
> -CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> -CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> -CONFIG_SCSI_AHCI=y
> -CONFIG_DFU_MMC=y
> -CONFIG_DFU_RAM=y
> -CONFIG_CMD_TCA642X=y
> -CONFIG_SUPPORT_EMMC_BOOT=y
> -CONFIG_MMC_OMAP_HS=y
> -CONFIG_SCSI=y
> -CONFIG_CONS_INDEX=3
> -CONFIG_SYS_NS16550=y
> -CONFIG_SPI=y
> -CONFIG_OMAP3_SPI=y
> -CONFIG_USB=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_DWC3=y
> -CONFIG_USB_DWC3_OMAP=y
> -CONFIG_USB_DWC3_PHY_OMAP=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> -CONFIG_USB_GADGET_VENDOR_NUM=0x0403
> -CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
> -CONFIG_USB_GADGET_DOWNLOAD=y
> -CONFIG_USB_HOST_ETHER=y
> -CONFIG_USB_ETHER_SMSC95XX=y
> -CONFIG_FAT_WRITE=y
> -CONFIG_OF_LIBFDT=y
> diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
> deleted file mode 100644
> index 53589c03ea..0000000000
> --- a/include/configs/omap5_uevm.h
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2013
> - * Texas Instruments Incorporated.
> - * Sricharan R	  <r.sricharan at ti.com>
> - *
> - * Configuration settings for the TI EVM5430 board.
> - * See ti_omap5_common.h for omap5 common settings.
> - */
> -
> -#ifndef __CONFIG_OMAP5_EVM_H
> -#define __CONFIG_OMAP5_EVM_H
> -
> -#include <environment/ti/dfu.h>
> -
> -#ifndef CONFIG_SPL_BUILD
> -/* Define the default GPT table for eMMC */
> -#define PARTS_DEFAULT \
> -	"uuid_disk=${uuid_gpt_disk};" \
> -	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
> -#endif
> -
> -#define DFUARGS \
> -	"dfu_bufsiz=0x10000\0" \
> -	DFU_ALT_INFO_MMC \
> -	DFU_ALT_INFO_EMMC \
> -	DFU_ALT_INFO_RAM
> -
> -#include <configs/ti_omap5_common.h>
> -
> -#define CONFIG_SYS_NS16550_COM3		UART3_BASE
> -
> -/* MMC ENV related defines */
> -#define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
> -
> -/* Enhance our eMMC support / experience. */
> -#define CONFIG_HSMMC2_8BIT
> -
> -/* Required support for the TCA642X GPIO we have on the uEVM */
> -#define CONFIG_TCA642X
> -#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
> -#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
> -
> -/* USB UHH support options */
> -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> -
> -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
> -#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
> -
> -/* Enabled commands */
> -
> -/* USB Networking options */
> -
> -#define CONSOLEDEV		"ttyS2"
> -
> -#define CONFIG_SCSI_AHCI_PLAT
> -#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
> -#define CONFIG_SYS_SCSI_MAX_LUN		1
> -#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> -						CONFIG_SYS_SCSI_MAX_LUN)
> -
> -#endif /* __CONFIG_OMAP5_EVM_H */
> 


More information about the U-Boot mailing list