[PATCH v4 03/12] test: pinmux: Add test for pin muxing
Sean Anderson
seanga2 at gmail.com
Wed Jun 24 12:29:38 CEST 2020
This extends the pinctrl-sandbox driver to support pin muxing, and adds a
test for that behaviour. The test is done in C and not python (like the
existing tests for the pinctrl uclass) because it needs to call
pinctrl_select_state. Another option could be to add a command that
invokes pinctrl_select_state and then test everything in
test/py/tests/test_pinmux.py.
The pinctrl-sandbox driver now mimics the way that many pinmux devices
work. There are two groups of pins which are muxed together, as well as
four pins which are muxed individually. I have tried to test all normal
paths. However, very few error cases are explicitly checked for.
Signed-off-by: Sean Anderson <seanga2 at gmail.com>
---
Changes in v4:
- Add sandbox dt-binding headers to MAINTAINERS
- Add test/dm/pinmux.c to patch
- Move sandbox_* variables into a priv structure. This resets them to the
default state every time we re-probe.
Changes in v3:
- Add dt-bindings/pinctrl/sandbox-pinmux.h to patch
Changes in v2:
- New
MAINTAINERS | 1 +
arch/sandbox/dts/test.dts | 45 ++++-
drivers/pinctrl/pinctrl-sandbox.c | 186 ++++++++++++++-----
include/dt-bindings/pinctrl/sandbox-pinmux.h | 19 ++
test/dm/Makefile | 3 +
test/dm/pinmux.c | 57 ++++++
test/py/tests/test_pinmux.py | 36 ++--
7 files changed, 274 insertions(+), 73 deletions(-)
create mode 100644 include/dt-bindings/pinctrl/sandbox-pinmux.h
create mode 100644 test/dm/pinmux.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 465c166607..ba31b9d484 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -901,6 +901,7 @@ SANDBOX
M: Simon Glass <sjg at chromium.org>
S: Maintained
F: arch/sandbox/
+F: include/dt-bindings/*/sandbox*.h
SH
M: Marek Vasut <marek.vasut+renesas at gmail.com>
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index f5b685f7fe..36736f374d 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/sandbox-gpio.h>
+#include <dt-bindings/pinctrl/sandbox-pinmux.h>
/ {
model = "sandbox";
@@ -967,30 +968,60 @@
pinctrl {
compatible = "sandbox,pinctrl";
- pinctrl-names = "default";
- pinctrl-0 = <&gpios>;
+ pinctrl-names = "default", "alternate";
+ pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_i2s>;
+ pinctrl-1 = <&pinctrl_spi>, <&pinctrl_i2c>;
- gpios: gpios {
+ pinctrl_gpios: gpios {
gpio0 {
- pins = "GPIO0";
+ pins = "P5";
+ function = "GPIO";
bias-pull-up;
input-disable;
};
gpio1 {
- pins = "GPIO1";
+ pins = "P6";
+ function = "GPIO";
output-high;
drive-open-drain;
};
gpio2 {
- pins = "GPIO2";
+ pinmux = <SANDBOX_PINMUX(7, SANDBOX_PINMUX_GPIO)>;
bias-pull-down;
input-enable;
};
gpio3 {
- pins = "GPIO3";
+ pinmux = <SANDBOX_PINMUX(8, SANDBOX_PINMUX_GPIO)>;
bias-disable;
};
};
+
+ pinctrl_i2c: i2c {
+ groups {
+ groups = "I2C_UART";
+ function = "I2C";
+ };
+
+ pins {
+ pins = "P0", "P1";
+ drive-open-drain;
+ };
+ };
+
+ pinctrl_i2s: i2s {
+ groups = "SPI_I2S";
+ function = "I2S";
+ };
+
+ pinctrl_spi: spi {
+ groups = "SPI_I2S";
+ function = "SPI";
+
+ cs {
+ pinmux = <SANDBOX_PINMUX(5, SANDBOX_PINMUX_CS)>,
+ <SANDBOX_PINMUX(6, SANDBOX_PINMUX_CS)>;
+ };
+ };
};
hwspinlock at 0 {
diff --git a/drivers/pinctrl/pinctrl-sandbox.c b/drivers/pinctrl/pinctrl-sandbox.c
index ac0119d198..d27f74248d 100644
--- a/drivers/pinctrl/pinctrl-sandbox.c
+++ b/drivers/pinctrl/pinctrl-sandbox.c
@@ -1,57 +1,70 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro at socionext.com>
+ * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro at socionext.com>
*/
-/* #define DEBUG */
-
#include <common.h>
#include <dm.h>
-#include <log.h>
#include <dm/pinctrl.h>
+#include <dt-bindings/pinctrl/sandbox-pinmux.h>
+#include <log.h>
#include <linux/bitops.h>
+/*
+ * This driver emulates a pin controller with the following rules:
+ * - The pinctrl config for each pin must be set individually
+ * - The first three pins (P0-P2) must be muxed as a group
+ * - The next two pins (P3-P4) must be muxed as a group
+ * - The last four pins (P5-P8) must be muxed individually
+ */
+
static const char * const sandbox_pins[] = {
- "SCL",
- "SDA",
- "TX",
- "RX",
- "W1",
- "GPIO0",
- "GPIO1",
- "GPIO2",
- "GPIO3",
+#define PIN(x) \
+ [x] = "P" #x
+ PIN(0),
+ PIN(1),
+ PIN(2),
+ PIN(3),
+ PIN(4),
+ PIN(5),
+ PIN(6),
+ PIN(7),
+ PIN(8),
+#undef PIN
};
-static const char * const sandbox_pins_muxing[] = {
- "I2C SCL",
- "I2C SDA",
- "Uart TX",
- "Uart RX",
- "1-wire gpio",
- "gpio",
- "gpio",
- "gpio",
- "gpio",
+static const char * const sandbox_pins_muxing[][2] = {
+ { "UART TX", "I2C SCL" },
+ { "UART RX", "I2C SDA" },
+ { "SPI SCLK", "I2S SCK" },
+ { "SPI MOSI", "I2S SD" },
+ { "SPI MISO", "I2S WS" },
+ { "GPIO0", "SPI CS0" },
+ { "GPIO1", "SPI CS1" },
+ { "GPIO2", "PWM0" },
+ { "GPIO3", "PWM1" },
};
+#define SANDBOX_GROUP_I2C_UART 0
+#define SANDBOX_GROUP_SPI_I2S 1
+
static const char * const sandbox_groups[] = {
- "i2c",
- "serial_a",
- "serial_b",
- "spi",
- "w1",
+ [SANDBOX_GROUP_I2C_UART] = "I2C_UART",
+ [SANDBOX_GROUP_SPI_I2S] = "SPI_I2S",
};
static const char * const sandbox_functions[] = {
- "i2c",
- "serial",
- "spi",
- "w1",
- "gpio",
- "gpio",
- "gpio",
- "gpio",
+#define FUNC(id) \
+ [SANDBOX_PINMUX_##id] = #id
+ FUNC(UART),
+ FUNC(I2C),
+ FUNC(SPI),
+ FUNC(I2S),
+ FUNC(GPIO),
+ FUNC(CS),
+ FUNC(PWM),
+#undef FUNC
};
static const struct pinconf_param sandbox_conf_params[] = {
@@ -68,9 +81,12 @@ static const struct pinconf_param sandbox_conf_params[] = {
{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
};
-/* bitfield used to save param and value of each pin/selector */
-static unsigned int sandbox_pins_param[ARRAY_SIZE(sandbox_pins)];
-static unsigned int sandbox_pins_value[ARRAY_SIZE(sandbox_pins)];
+/* Bitfield used to save param and value of each pin/selector */
+struct sandbox_pinctrl_priv {
+ unsigned int mux;
+ unsigned int pins_param[ARRAY_SIZE(sandbox_pins)];
+ unsigned int pins_value[ARRAY_SIZE(sandbox_pins)];
+};
static int sandbox_get_pins_count(struct udevice *dev)
{
@@ -87,16 +103,18 @@ static int sandbox_get_pin_muxing(struct udevice *dev,
char *buf, int size)
{
const struct pinconf_param *p;
+ struct sandbox_pinctrl_priv *priv = dev_get_priv(dev);
int i;
- snprintf(buf, size, "%s", sandbox_pins_muxing[selector]);
+ snprintf(buf, size, "%s",
+ sandbox_pins_muxing[selector][!!(priv->mux & BIT(selector))]);
- if (sandbox_pins_param[selector]) {
+ if (priv->pins_param[selector]) {
for (i = 0, p = sandbox_conf_params;
i < ARRAY_SIZE(sandbox_conf_params);
i++, p++) {
- if ((sandbox_pins_param[selector] & BIT(p->param)) &&
- (!!(sandbox_pins_value[selector] & BIT(p->param)) ==
+ if ((priv->pins_param[selector] & BIT(p->param)) &&
+ (!!(priv->pins_value[selector] & BIT(p->param)) ==
p->default_value)) {
strncat(buf, " ", size);
strncat(buf, p->property, size);
@@ -133,12 +151,32 @@ static const char *sandbox_get_function_name(struct udevice *dev,
static int sandbox_pinmux_set(struct udevice *dev, unsigned pin_selector,
unsigned func_selector)
{
+ int mux;
+ struct sandbox_pinctrl_priv *priv = dev_get_priv(dev);
+
debug("sandbox pinmux: pin = %d (%s), function = %d (%s)\n",
pin_selector, sandbox_get_pin_name(dev, pin_selector),
func_selector, sandbox_get_function_name(dev, func_selector));
- sandbox_pins_param[pin_selector] = 0;
- sandbox_pins_value[pin_selector] = 0;
+ if (pin_selector < 5)
+ return -EINVAL;
+
+ switch (func_selector) {
+ case SANDBOX_PINMUX_GPIO:
+ mux = 0;
+ break;
+ case SANDBOX_PINMUX_CS:
+ case SANDBOX_PINMUX_PWM:
+ mux = BIT(pin_selector);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ priv->mux &= ~BIT(pin_selector);
+ priv->mux |= mux;
+ priv->pins_param[pin_selector] = 0;
+ priv->pins_value[pin_selector] = 0;
return 0;
}
@@ -147,25 +185,75 @@ static int sandbox_pinmux_group_set(struct udevice *dev,
unsigned group_selector,
unsigned func_selector)
{
+ bool mux;
+ int i, group_start, group_end;
+ struct sandbox_pinctrl_priv *priv = dev_get_priv(dev);
+ unsigned int mask;
+
debug("sandbox pinmux: group = %d (%s), function = %d (%s)\n",
group_selector, sandbox_get_group_name(dev, group_selector),
func_selector, sandbox_get_function_name(dev, func_selector));
+ if (group_selector == SANDBOX_GROUP_I2C_UART) {
+ group_start = 0;
+ group_end = 1;
+
+ if (func_selector == SANDBOX_PINMUX_UART)
+ mux = false;
+ else if (func_selector == SANDBOX_PINMUX_I2C)
+ mux = true;
+ else
+ return -EINVAL;
+ } else if (group_selector == SANDBOX_GROUP_SPI_I2S) {
+ group_start = 2;
+ group_end = 4;
+
+ if (func_selector == SANDBOX_PINMUX_SPI)
+ mux = false;
+ else if (func_selector == SANDBOX_PINMUX_I2S)
+ mux = true;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
+
+ mask = GENMASK(group_end, group_start);
+ priv->mux &= ~mask;
+ priv->mux |= mux ? mask : 0;
+
+ for (i = group_start; i < group_end; i++) {
+ priv->pins_param[i] = 0;
+ priv->pins_value[i] = 0;
+ }
+
return 0;
}
+static int sandbox_pinmux_property_set(struct udevice *dev, u32 pinmux_group)
+{
+ int ret;
+ unsigned pin_selector = pinmux_group & 0xFFFF;
+ unsigned func_selector = pinmux_group >> 16;
+
+ ret = sandbox_pinmux_set(dev, pin_selector, func_selector);
+ return ret ? ret : pin_selector;
+}
+
static int sandbox_pinconf_set(struct udevice *dev, unsigned pin_selector,
unsigned param, unsigned argument)
{
+ struct sandbox_pinctrl_priv *priv = dev_get_priv(dev);
+
debug("sandbox pinconf: pin = %d (%s), param = %d, arg = %d\n",
pin_selector, sandbox_get_pin_name(dev, pin_selector),
param, argument);
- sandbox_pins_param[pin_selector] |= BIT(param);
+ priv->pins_param[pin_selector] |= BIT(param);
if (argument)
- sandbox_pins_value[pin_selector] |= BIT(param);
+ priv->pins_value[pin_selector] |= BIT(param);
else
- sandbox_pins_value[pin_selector] &= ~BIT(param);
+ priv->pins_value[pin_selector] &= ~BIT(param);
return 0;
}
@@ -191,6 +279,7 @@ const struct pinctrl_ops sandbox_pinctrl_ops = {
.get_function_name = sandbox_get_function_name,
.pinmux_set = sandbox_pinmux_set,
.pinmux_group_set = sandbox_pinmux_group_set,
+ .pinmux_property_set = sandbox_pinmux_property_set,
.pinconf_num_params = ARRAY_SIZE(sandbox_conf_params),
.pinconf_params = sandbox_conf_params,
.pinconf_set = sandbox_pinconf_set,
@@ -207,5 +296,6 @@ U_BOOT_DRIVER(sandbox_pinctrl) = {
.name = "sandbox_pinctrl",
.id = UCLASS_PINCTRL,
.of_match = sandbox_pinctrl_match,
+ .priv_auto_alloc_size = sizeof(struct sandbox_pinctrl_priv),
.ops = &sandbox_pinctrl_ops,
};
diff --git a/include/dt-bindings/pinctrl/sandbox-pinmux.h b/include/dt-bindings/pinctrl/sandbox-pinmux.h
new file mode 100644
index 0000000000..891af072e5
--- /dev/null
+++ b/include/dt-bindings/pinctrl/sandbox-pinmux.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#ifndef SANDBOX_PINMUX_H
+#define SANDBOX_PINMUX_H
+
+#define SANDBOX_PINMUX_UART 0
+#define SANDBOX_PINMUX_I2C 1
+#define SANDBOX_PINMUX_SPI 2
+#define SANDBOX_PINMUX_I2S 3
+#define SANDBOX_PINMUX_GPIO 4
+#define SANDBOX_PINMUX_CS 5
+#define SANDBOX_PINMUX_PWM 6
+
+#define SANDBOX_PINMUX(pin, func) ((func) << 16 | (pin))
+
+#endif /* SANDBOX_PINMUX_H */
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 0d1c66fa1e..9e273ee02d 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -76,4 +76,7 @@ obj-$(CONFIG_DM_RNG) += rng.o
obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
+ifneq ($(CONFIG_PINMUX),)
+obj-$(CONFIG_PINCONF) += pinmux.o
+endif
endif
diff --git a/test/dm/pinmux.c b/test/dm/pinmux.c
new file mode 100644
index 0000000000..e7607c9b25
--- /dev/null
+++ b/test/dm/pinmux.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <dm/test.h>
+#include <test/ut.h>
+
+static int dm_test_pinmux(struct unit_test_state *uts)
+{
+ char buf[64];
+ struct udevice *dev;
+
+#define test_muxing(selector, expected) do { \
+ ut_assertok(pinctrl_get_pin_muxing(dev, selector, buf, sizeof(buf))); \
+ ut_asserteq_str(expected, (char *)&buf); \
+} while (0)
+
+ ut_assertok(uclass_get_device_by_name(UCLASS_PINCTRL, "pinctrl", &dev));
+ test_muxing(0, "UART TX.");
+ test_muxing(1, "UART RX.");
+ test_muxing(2, "I2S SCK.");
+ test_muxing(3, "I2S SD.");
+ test_muxing(4, "I2S WS.");
+ test_muxing(5, "GPIO0 bias-pull-up input-disable.");
+ test_muxing(6, "GPIO1 drive-open-drain.");
+ test_muxing(7, "GPIO2 bias-pull-down input-enable.");
+ test_muxing(8, "GPIO3 bias-disable.");
+
+ ut_assertok(pinctrl_select_state(dev, "alternate"));
+ test_muxing(0, "I2C SCL drive-open-drain.");
+ test_muxing(1, "I2C SDA drive-open-drain.");
+ test_muxing(2, "SPI SCLK.");
+ test_muxing(3, "SPI MOSI.");
+ test_muxing(4, "SPI MISO.");
+ test_muxing(5, "SPI CS0.");
+ test_muxing(6, "SPI CS1.");
+ test_muxing(7, "GPIO2 bias-pull-down input-enable.");
+ test_muxing(8, "GPIO3 bias-disable.");
+
+ ut_assertok(pinctrl_select_state(dev, "0"));
+ test_muxing(0, "I2C SCL drive-open-drain.");
+ test_muxing(1, "I2C SDA drive-open-drain.");
+ test_muxing(2, "I2S SCK.");
+ test_muxing(3, "I2S SD.");
+ test_muxing(4, "I2S WS.");
+ test_muxing(5, "GPIO0 bias-pull-up input-disable.");
+ test_muxing(6, "GPIO1 drive-open-drain.");
+ test_muxing(7, "GPIO2 bias-pull-down input-enable.");
+ test_muxing(8, "GPIO3 bias-disable.");
+
+ return 0;
+}
+DM_TEST(dm_test_pinmux, DM_TESTF_SCAN_FDT);
diff --git a/test/py/tests/test_pinmux.py b/test/py/tests/test_pinmux.py
index 4e6df992a4..0cbbae000c 100644
--- a/test/py/tests/test_pinmux.py
+++ b/test/py/tests/test_pinmux.py
@@ -28,15 +28,15 @@ def test_pinmux_status_all(u_boot_console):
assert ('a6 : gpio output .' in output)
assert ('pinctrl:' in output)
- assert ('SCL : I2C SCL.' in output)
- assert ('SDA : I2C SDA.' in output)
- assert ('TX : Uart TX.' in output)
- assert ('RX : Uart RX.' in output)
- assert ('W1 : 1-wire gpio.' in output)
- assert ('GPIO0 : gpio bias-pull-up input-disable.' in output)
- assert ('GPIO1 : gpio drive-open-drain.' in output)
- assert ('GPIO2 : gpio bias-pull-down input-enable.' in output)
- assert ('GPIO3 : gpio bias-disable.' in output)
+ assert ('P0 : UART TX.' in output)
+ assert ('P1 : UART RX.' in output)
+ assert ('P2 : I2S SCK.' in output)
+ assert ('P3 : I2S SD.' in output)
+ assert ('P4 : I2S WS.' in output)
+ assert ('P5 : GPIO0 bias-pull-up input-disable.' in output)
+ assert ('P6 : GPIO1 drive-open-drain.' in output)
+ assert ('P7 : GPIO2 bias-pull-down input-enable.' in output)
+ assert ('P8 : GPIO3 bias-disable.' in output)
@pytest.mark.buildconfigspec('cmd_pinmux')
@pytest.mark.boardspec('sandbox')
@@ -73,12 +73,12 @@ def test_pinmux_status(u_boot_console):
assert (not 'pinctrl-gpio:' in output)
assert (not 'pinctrl:' in output)
- assert ('SCL : I2C SCL.' in output)
- assert ('SDA : I2C SDA.' in output)
- assert ('TX : Uart TX.' in output)
- assert ('RX : Uart RX.' in output)
- assert ('W1 : 1-wire gpio.' in output)
- assert ('GPIO0 : gpio bias-pull-up input-disable.' in output)
- assert ('GPIO1 : gpio drive-open-drain.' in output)
- assert ('GPIO2 : gpio bias-pull-down input-enable.' in output)
- assert ('GPIO3 : gpio bias-disable.' in output)
+ assert ('P0 : UART TX.' in output)
+ assert ('P1 : UART RX.' in output)
+ assert ('P2 : I2S SCK.' in output)
+ assert ('P3 : I2S SD.' in output)
+ assert ('P4 : I2S WS.' in output)
+ assert ('P5 : GPIO0 bias-pull-up input-disable.' in output)
+ assert ('P6 : GPIO1 drive-open-drain.' in output)
+ assert ('P7 : GPIO2 bias-pull-down input-enable.' in output)
+ assert ('P8 : GPIO3 bias-disable.' in output)
--
2.26.2
More information about the U-Boot
mailing list