[PATCH 2/3] spl: mmc: Move the eMMC boot part index to weak function
Ye Li
ye.li at nxp.com
Tue Jun 9 12:34:43 CEST 2020
Move the default eMMC boot partition index used for SPL load to a weak
function. So we can override it in iMX8 specified codes.
Because on iMX8 when the emmc regular boot is from boot part0/1, ROM will
switch to the other boot part for secondary boot. So we can't directly
use the boot part index in PARTITION_CONFIG register, but have
to check the secondary boot for using correct boot partition.
Signed-off-by: Ye Li <ye.li at nxp.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
common/spl/spl_mmc.c | 35 ++++++++++++++++++++++-------------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index add2785..f2880cc 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -324,6 +324,27 @@ unsigned long __weak spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
return raw_sect;
}
+int __weak spl_mmc_emmc_boot_partition(struct mmc *mmc)
+{
+ int part = 0;
+
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
+ part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
+#else
+ /*
+ * We need to check what the partition is configured to.
+ * 1 and 2 match up to boot0 / boot1 and 7 is user data
+ * which is the first physical partition (0).
+ */
+ part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
+
+ if (part == 7)
+ part = 0;
+#endif
+
+ return part;
+}
+
int spl_mmc_load(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev,
const char *filename,
@@ -355,19 +376,7 @@ int spl_mmc_load(struct spl_image_info *spl_image,
err = -EINVAL;
switch (boot_mode) {
case MMCSD_MODE_EMMCBOOT:
-#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
- part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
-#else
- /*
- * We need to check what the partition is configured to.
- * 1 and 2 match up to boot0 / boot1 and 7 is user data
- * which is the first physical partition (0).
- */
- part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
-
- if (part == 7)
- part = 0;
-#endif
+ part = spl_mmc_emmc_boot_partition(mmc);
if (CONFIG_IS_ENABLED(MMC_TINY))
err = mmc_switch_part(mmc, part);
--
2.7.4
More information about the U-Boot
mailing list