[PATCH v3 2/2] board: presidio-asic: Add CAxxxx Ethernet support

[Alex Nemirovsky]

Add CAxxxx Ethernet support for the Cortina Access
Presidio Engineering Board

Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com>
---

Changes in v3: None
Changes in v2: None

 arch/arm/dts/ca-presidio-engboard.dts        |  7 +++++++
 board/cortina/presidio-asic/presidio.c       | 21 +++++++++++++++++++++
 configs/cortina_presidio-asic-emmc_defconfig |  4 +++-
 3 files changed, 31 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/ca-presidio-engboard.dts b/arch/arm/dts/ca-presidio-engboard.dts
index c03dacc..fff879d 100644
--- a/arch/arm/dts/ca-presidio-engboard.dts
+++ b/arch/arm/dts/ca-presidio-engboard.dts
@@ -66,4 +66,11 @@
 			spi-max-frequency = <108000000>;
 		};
 	};
+
+	eth: ethnet at 0xf4300000 {
+		compatible = "eth_cortina";
+		reg = <0x0 0xf4320000 0x34>,
+		      <0x0 0xf43290d8 0x04>,
+		      <0x0 0xf4304000 0x04>;
+	};
 };
diff --git a/board/cortina/presidio-asic/presidio.c b/board/cortina/presidio-asic/presidio.c
index 3c132f1..a0dbfd6 100644
--- a/board/cortina/presidio-asic/presidio.c
+++ b/board/cortina/presidio-asic/presidio.c
@@ -105,6 +105,27 @@ int board_init(void)
 	return 0;
 }
 
+#ifndef CONFIG_DM_ETH
+/*
+ * Board specific ethernet initialization routine.
+ */
+int ca77xx_eth_initialize(bd_t *bis);
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+	unsigned int reg_data;
+
+	ca77xx_eth_initialize(bis);
+
+	// Power down GMAC4 TX/RX clock for EMI issue
+	reg_data = readl(0xf4304684);
+	reg_data |= (3 << 11);
+	writel(reg_data, 0xf4304684);
+
+	return rc;
+}
+#endif
+
 int dram_init(void)
 {
 	unsigned int ddr_size;
diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig
index e10008a..360ebeb 100644
--- a/configs/cortina_presidio-asic-emmc_defconfig
+++ b/configs/cortina_presidio-asic-emmc_defconfig
@@ -21,12 +21,14 @@ CONFIG_CMD_EXT4=y
 CONFIG_OF_CONTROL=y
 CONFIG_OF_LIVE=y
 CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
-# CONFIG_NET is not set
 CONFIG_DM=y
 CONFIG_CORTINA_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_CORTINA=y
+CONFIG_PHYLIB=y
+CONFIG_DM_ETH=y
+CONFIG_CORTINA_NI_ENET=y
 CONFIG_DM_SERIAL=y
 CONFIG_CORTINA_UART=y
 CONFIG_WDT=y
-- 
2.7.4